Printer setting to print in background ?

Hello,
Im using F110 to print cheque and advice . I have set in a way to print the advice on the default PC printer (LOCL) and the cheque on a dotmatrix printer that i have created on SPAD. When i test this advice and cheque using TEST TRANSACTION , i could print both advice and cheque at the same time on different printer at the same time. But F110 creates a background job and the jobs triggers the print.
The setting on SPAD for my printers,
1) DOTMATRIX(Cheque)
device attribute -> devicetype = TWSPWIN ,
Device class = Standard printer
Access method -> Hot spool access method = F F:Printing on front end printer , HOST PRINTER = <My network printer name(dotmatrix)> , I have also CHECKED (X) "NO DEVICE SELECTION AT FRONTEND"
2) 1) LOCL
device attribute -> devicetype = TWSPWIN ,
Device class = Standard printer
LOCATION = <Location of the printer >.
Access method -> Hot spool access method = F F:Printing on front end printer , HOST PRINTER = __DEFAULT.
Im sure that 'F F:Printing on front end printer' will print when i execute in foreground . But F110 executes the print in background, hence the spool created results in error "frountend unavailable" .
How can i handle this issue . Should i configure the printer to which i need to send advice in SAP instead of using LOCAL . If i configure what are the parameters i need to maintain w.r.t background execution as im now using 'F F:Printing on front end printer ' on access method.
Please advice .
Thanks,
Jeeva.

Hi Jeeva,
I cannot give you the details for the printer configuration but I am sure that you can not print using printer LOCL in background. In background this will always error out as is your case at the moment. You need to define the printer in SPAD.
You can try the access method as L. We have a printer with similar config used for background printing.
Regards,
Anurag

Similar Messages

How do I change the printer setting to print in Black only?

How can I change my printer setting to print in Black only

It depends on your printer as well; my Epson AIO only does color (even when it is black font only) - or grayscale )sort of a "draft" quality) as it uses some color even for black:

How do I change the double-sided print setting when printing from a website

I used to know how to change my printer settings when I used a PC but now that I'm using a Mac it's a completely different story. Usually when I print I'm given a print preview screen where I can make choices how to print but some websites just send materials directly to the printer without providing me with a print preview screen so I can change the settings, for example, disabling the double sided feature. Can anyone provide me with simple directions how to correct this issue? I have a MacBook Pro & am printing to an Epson WF-3540. I'm now very computer literate unfortunately. Appreciate any suggestions, especially those that are fairly simple. Thanks so much

Usually when I print I'm given a print preview screen where I can make choices how to print but some websites just send materials directly to the printer without providing me with a print preview screen so I can change the settings,
I cannot identify with what you are saying, as this has never happened to me.
This is a print preview dialog box, in its expanded state. The document it is about to print is the print dialog box, in its non-expanded state. The red arrow points to the control.
Once expanded, there are several screens full of options you can choose from. They are under the pop-up labeled [ Preview ] on this example.

Epson had sheet 1 and 2 trays, and it not in mac print setting to print different level

I had issue new software version 10.9.4. and my printer epson version 2.0. it cannot be upgrade epson version when my epson CD and not support mac software is 10.7.0 less. my printer is epson workforce 845 and it had 2 storage tray. when i use command and P, it does not show tray 1 and 2 is missing. unable to print different sheet where i put mail between paper in 1 and 2 tray. so that my issues. apple company should fix this problem. anyone help?

Sadly as this is customer to customer forum you are only talking to fellow customers.
Perhaps it would be better to contact the Mods who are the only BT employees here,
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Printer Setting for Printing

HI All,
i Dont know this is correct way or not to ask this Question
I have Developed a SAP Script and that have 4 pages for example
i need that pages print
but now my Doubt is , if we have a big printer and that have 3 or 4 tray for pinting in this case from our Script first page is from one tray and second page is from some other tray like that need tp print
is that possible ???
if possible that is ABAP work or BASIS settings????
Please Help Me
Thanks
Surendra P

Hi ,
It is possible in you SAP-script only to assign any specific page to a printer tray. Pls check following:
1. In your SAP-Script goto you Pages. Now double click on your FIRST PAGE.
2. Now at the bottom of the screen there is Print Attributes options. Specify your TRAY Name or Number to that Resource Name and keep your printing mode as you like.
3. Similarly you do for your next page. Same as above. Just keep your TRAY name as you want.
It will help you.
Regs,
Lokesh
Edited by: Lokesh Tarey on Mar 26, 2010 8:09 AM

Page and Print Set-Up in P6.2

Can you save your page set-up (page size etc.) and print set-up (printer, including Adobe) with your layout save?

michigan mike wrote:
Can you save your page set-up (page size etc.) with your layout save?YES
.. and print set-up (printer, including Adobe) with your layout save?NO. not with the layout, but print driver default settings. more to do with the client machine OS.
try 1st and 2nd buttons in the "print preview" icon bar.
best of luck

Default to print setting

I go to "print" and it always defaults to "fax" setting. I have to change setting through the pull down menu. How can i set the default print setting to "print" not "fax"?
This question was solved.
View Solution.

milkprod,
Try clicking the start orb and navigating to devices and printers. Here find your printer and right click then set as default. Let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Reader X 10.1.2 does not follow printer settings for printing multiple copies

Hi,
I recently installed ReaderX 10.1.2 and find that when I set multiple copies (e.g. 3 copies) in the printer settings, it was not reflected in the print dialog of Adobe ReaderX 10.1.2. There is no issue on previous version of Adobe Reader i.e. 8 & 9. I tested with several vendor drivers still also the same issue.
Is this a bug in Reader 10.1.2 or Printer driver issue? Are there any workaround?
Thanks alot
sgflyer12
Printer Setting:
ReaderX Print Dialog

Can you please see if launching the Preferences window from within Adobe Reader standalone application works?

Pdf creation - can it be set up so the background doesn't print, and text defaults to black?

Hi, I am creating a portfolio with a black background and white text. I am anticipating that most of the time it will just be viewed on screen, but in-case it gets printed, I want to know if there is a way that you can change the print view so that the background is not printable, and any text defaults to black. I have noticed when printing web pages this often happens, but not sure if it's possible through InDesign.
Any replies gratefully appreciated.
Karen

Here is a way that this can be done: Convert the background into a button, this will allow you to set the background to be visible in PDF, but doesn't print. Note: with the button selected, you can access the visibility options from the flyout menu of the button panel. Copy the frame containing the reverse text and convert it to a button and apply the same visibility (visible in PDF, but doesn't print). Paste text in same position, make it black and send it to back (or create a layer behind everything and place text here). The black text does not have to be a button. When you export, make sure to have interactive elements selected. In PDF, background and reverse type will be viewable, but allowing the black text to print.

In iTunes, my printing is white and the background is black, How do I change it back to white printing on a black background.

In my iTunes store, the printing is white and the background is black and I have forgotten how to change it back to black printing on a white background? I know that it is a simple answer, but right now I cannot think of it.
Also, what is the "other" when you are syncing an ipad in itunes and in my case the other is more than half of my 64Gb. How do I find out what it is and then get rid of it if I want to?
Thanks

Hi gramie47,
Sorry to hear that didn't resolve the issue.
I checked online for issues printing from the Internet, found a couple of things you can try. Most likely it is a setting that needs to be changed in the browser settings, since the printer prints fine from the computer.
From Internet Explorer, go to File, Page setup, Remove check from "Printer background color and images" if checked, or vise versa, to see if that helps.
Here is another document you may take a look at.
Map Images May Not Print Properly When Using Internet Explorer.
If you continue to have issues, contact your Internet Provider for further assistance.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

PDF not printing all the iamges or backgrounds

I have a PDF document that has some various images and things on it. Certain things are not printing for some reason.
The specific information is I have a sheet of Guitar information. On one page there's an example of a chord block. The numbers showing what finger to put where shows fine but the actual gridlines that make up the strings and frets do not work.
An example is this:
http://www.freewebs.com/guitarlincs//Moveable%20Chords%20101/Major%20Barre%20Chord%20A%20S hape.jpg
The numbers in circles show up but the actual lines do not.
On other parts, whole examples of sheet music with bars and notes and everything just don't print. They show up fine in the little preview window but not on the actual page.
I found that if I set the "Print as Image" box, then it does print but it then takes 45+ seconds to process each page before it actually prinst which is not something I want to wait for.
I'm not sure if these are setup as images or backgrounds or what in the actual PDF as I didn't create it. Is there a setting to print backgrounds and things if that's what it is or is there any other setting anyone can think of other than the Print as Image option?
Thanks.

Here's a link to the page in question (although there are other pages as well):
http://dl.dropbox.com/u/1787993/Guitar/Page_7_from1.L%26M_Guitar_Manual.pdf
What I found is that if I print to my main printer (HP 4300), the gridlines of the pictures in the middle of the page don't show up.
If I print to the Xerox 6360DT that I have, the picture shows up fine.
There must be a setting in the HP properties that's making it not work but I haven't been able to figur out what the setting is.

Acrobat Pro XI print dialog box opens in background, Web Browser

Issue: From web browser apps, I select Print > Adobe PDF > then, the Save PDF File As dialog box opens in the background instead of the foreground.
Acrobat Pro XI / Acrobat Pro 11.0.2
IE8 x32 / IE8 x64 / Firefox 20.0.1
Win7 Ent x64 SP1
Dell Latitude with I5 proc and Intel video
Dual screens with extended desktop display via DVI
In Distiller, I check the box for Preferences > Ask for PDF file destination.
I was issued a new corporate laptop a few months back, specs are above. Did not have this issue with Acrobat Pro X on my old Dell Latitude running Win7 Ent x64 SP1. So, I have multiple new moving parts in what could be the root cause.
Any ideas?
Thank you,
Doug

CowboyInAZ wrote:
"Acrobat is a fincky application..."
One thing I've learned since OSX 10.2 is that Mac is finicky about printer drivers too.
I had a Lexmark and it would freeze all the time after I switched to Panther. It was a discontinued model so when I moved up to 10.3 there were no new drivers. The old ones installed OK but they would cause it to freeze up and if it did print, it took about ten minutes to get through a page of text.
I got a new printer and one tht had current drivers available for Mac and the problem was solved.
It seems we fight a never-ending battle with hardware and software racing to stay ahead of each other.
Yes I've owned three printers since owning my first Mac an SE 30 I started out with a Apple ImagewriterII (made C-Itoch). I had to switch when I bought a 7100/66 which used the PowerPC processor instead of the 68030 processors. Then I had a HP DJ 650cse which used a Black Cartridge only. No color. I had to change again When I bought my G4-500. I am still using it today. Its the best printer I've had so far. I fear when I buy a new Intel Mac, and comes with X.6 (Snow Leopard) I will have to swap again. I've seen the new HP DeskJets and the won't last as long this one. They look like cheap toys and (gulp!) they use heads built like in epson not the Cartridges. The Cartridges were more expensive. But each time you bought one you got a new set of print heads. No longer.

No Option To Set Noise Print in Soundtrack Pro

This is another newbie to Soundtrack Pro question. I have background hiss from some terrible audio recording (not my doing) that I would like to utilize the noise reduction feature via setting a Noise Print. Once I select a section of my audio track and go to Process, however, it does not give me any options. Meaning, the options are all in gray, and cannot be selected/clicked on. Any ideas why this is? Everywhere I search (Discussions, phone support, at the Apple Store), I am told to follow the same steps, but I continue to be unable to choose Set Noise Print. Any feedback would be much appreciated.
Thank you so much!

Is this a multitrack project? If so, you must first double-click the clip to get it in it's own window.

How to set to print to a specific printer name

Background:
I have a form (one page) which has two hidden pages to it (front and back of certificate). The details entered on form appear on certificate. I have a hidden button on form which when pressed asks for a password and unhides certificate if correct password is entered as well as a button on form to print the certificate. This button to print the certificate is preset to print only pages 2 and 3.
Question:
I would like to know if there is a way of setting the "print certificate" button to automatically select a printer name as forms can be printed on any local printer but the certificate needs to print to a specific printer which is colour and has card stock.
The only code I have currently behind this print button is the following:
xfa.host.print(1, (xfa.host.numPages -2).toString(), (xfa.host.numPages -1).toString(), 0, 0, 0, 0, 0);

Hi,
I am fairly sure that you cannot do it using the xfa.host.print, but you may get a printParams working. See an example here https://acrobat.com/#d=Kuivy1SdOSbQnRs3kyeVDQ, in particular on page 2.
Hope that helps,
Niall

HP Laserjet P2035n is set to print double-sided, but I can't change it in the preferences

Last week i downloaded and printed a PDF file. Since then, my HP Laserjet 2035n is set to print double-sided. Here are the details.
I'm running an HP Pavilion Laptop with Windows 7 Home.
The printer is set up as a network printer.
When I try to print something, it stops after one page waiting for me to re-feed the paper manually to print on the other side.
It's only this laptop that's messed up. My other computer prints fine
When I go to Printers, right click on the 2035n, and select "Printer Properties" and look at the bottom of the General tab, it reads under Features "Double Sided: Yes"
If I then click 'Preferences..." and go to the Finishing tab, under Document Options, the box "Print On Both Sides (Manually)" box is unchecked.
Here's what I've tried:
I have uninstalled and reinstalled the printer
I reinstalled the printer drivers
I have tried reinstalling under a different name
Any suggestions? Can someone tell me where the printer preferences file is so I can manually delete it then reinstall the printer drivers? Is there a tool for the P2035N to uninstal EVERYTHING related to it?
Thanks.
This question was solved.
View Solution.

Hi,
Please try the following settings:
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
At the very bottom, uncheck the Allow Manual Duplexing option.
Now try printing and check for any change.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printer setting to print in background ?

Similar Messages

Maybe you are looking for