Printer Settings dialog missing when printing to another Mac with Bonjour

I want Photoshop to manage my color settings rather than my Epson 4800 or Epson SPRX 580 printers, so in the print dialog box I select the "Printer Color Management" tab and set color adjustments to the OFF position. This works fine as long as the printer is connected directly to my MacBook or my MacBook Pro. But if I try to send a job on my MacBook Pro via bonjour to either of the printers when it is connected to my MacBook, the print dialog is missing the choices of "Printer Color Management", "Printer Settings", etc.
All that is available are things like "Layout, Cover Page, Scheduler, Summary." The "Printer Settings, Color Management" options only show up on either computer when connected directly to the printer.
Is there a way to get those other choices (Printer Settings, Color Management) when printing over a bonjour network?
I'm on Mac OS 10.5.6 on the MacBook Pro and Mac OS 10.4.10 on the MacBook. I have downloaded all the driver updates from Epson and deleted and added the printers again with the same result.

HP must have release a driver update because we no longer encounter the problem.

Similar Messages

Can't recall printer settings dialog from PS Print dialog

I am looking for toubleshooting ideas for my problem - I would like to avoid reinstalling CS at this point.
Problem:
If I try to print to my remote Epson printer (3880 installed on another Windows 7 computer and accessed as shared printer) and if I click on the Settings button in PS CS4 Print dialog box, I got the following error: "Could not complete your request because an error occurred while printing"
What I have:
Two computers. One has Epson printer connected through USB, the other prints to it via network. Both are Windows 7 64 bit, latest drivers
What I found so far:
The printer works fine from LR3 and Illustrator CS 4, only Photoshop fails to print
Other printers, including network printers work fine from Photoshop
This started to happen after installing CS5 tryout, but I am not positive it this is the cause
The printing worked at some point
If I create PSD file with this Epson printer specified and open it on another computer with PS (which otherwise prints to this printer normally), I get the same error.
What I did so far:
Reinstalled the printer on the PS machine
Reset PS preferences file
Thanks

Unfortunately, I don't remember how I fixed the problem. I think there was some mixup because I used the printer as USB once and via network later. I don't use PS on that PC anymore, but I think I had to use the printer as USB to make it working. I also think the CS5 tryout caused some issues.
So you can try this:
- If you use it as networked, try installing the driver again as USB or vice versa
- If you use CS4 and have CS5 tryout, uninstall CS5
Not sure if it helps, but I don't have anything better, sorry.

Can't open Print Settings dialog

All of the sudden I cannot open the print settings dialog from the print window in Aperture. Every time I click the button, I get this in console:
3/22/08 3:16:22 PM Aperture[574] * Assertion failure in -[RedRock _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], /SourceCache/AppKit/AppKit-949.27/AppKit.subproj/NSApplication.m:2998
3/22/08 3:16:22 PM Aperture[574] Main Thread Exception in Aperture: Modal session requires modal window
Backtrace:
0x0007043d (in Aperture)
0x93fa7eb7: +[NSException exceptionWithName:reason:userInfo:] (in CoreFoundation)
0x93fa8023: +[NSException raise:format:arguments:] (in CoreFoundation)
0x94d95044: -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] (in Foundation)
0x9149fe20: -[NSApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:] (in AppKit)
0x009609ec (in ProKit)
0x00362b6d (in Aperture)
0x000a08c4 (in Aperture)
0x91471e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x91471d94: -[NSControl sendAction:to:] (in AppKit)
0x91471c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x91471273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x91470ac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x91470380: -[NSControl mouseDown:] (in AppKit)
0x9146eac3: -[NSWindow sendEvent:] (in AppKit)
0x00982c3e (in ProKit)
0x9143b714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x915dcf43: -[NSApplication _realDoModalLoop:peek:] (in AppKit)
0x915d7657: -[NSApplication runModalForWindow:] (in AppKit)
0x001bc7bc (in Aperture)
0x0009ec21 (in Aperture)
0x001288e4 (in Aperture)
0x91471e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x91471d94: -[NSControl sendAction:to:] (in AppKit)
0x91471c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x91471273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x91470ac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x91470380: -[NSControl mouseDown:] (in AppKit)
0x9146eac3: -[NSWindow sendEvent:] (in AppKit)
0x00983eba (in ProKit)
0x9143b714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x913990f9: -[NSApplication run] (in AppKit)
0x00960e5a (in ProKit)
0x00003872 (in Aperture)
anybody else with this problem?
(could this be related to this??? http://discussions.apple.com/thread.jspa?messageID=6559834&#6559834)

Nothing new to add other than I am getting the identical behavior. The output on my console appears to match to OP's. Any help would be appreciated. This is on Aperture 2.0.1 with all the security and other updates applied.
3/24/08 10:00:58 AM Aperture[29084] * Assertion failure in -[RedRock _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], /SourceCache/AppKit/AppKit-949.27/AppKit.subproj/NSApplication.m:2998
3/24/08 10:00:58 AM Aperture[29084] Main Thread Exception in Aperture: Modal session requires modal window
Backtrace:
0x0007043d (in Aperture)
0x912e1eb7: +[NSException exceptionWithName:reason:userInfo:] (in CoreFoundation)
0x912e2023: +[NSException raise:format:arguments:] (in CoreFoundation)
0x965f6044: -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] (in Foundation)
0x9337ee20: -[NSApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:] (in AppKit)
0x009609ec (in ProKit)
0x00362b6d (in Aperture)
0x000a08c4 (in Aperture)
0x93350e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x93350d94: -[NSControl sendAction:to:] (in AppKit)
0x93350c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x93350273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x9334fac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x9334f380: -[NSControl mouseDown:] (in AppKit)
0x9334dac3: -[NSWindow sendEvent:] (in AppKit)
0x00982c3e (in ProKit)
0x9331a714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x934bbf43: -[NSApplication _realDoModalLoop:peek:] (in AppKit)
0x934b6657: -[NSApplication runModalForWindow:] (in AppKit)
0x001bc7bc (in Aperture)
0x0009e8c1 (in Aperture)
0x0004415f (in Aperture)
0x93350e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x933ff7cc: -[NSMenu performActionForItemAtIndex:] (in AppKit)
0x933ff4d1: -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] (in AppKit)
0x933dc3ae: AppKitMenuEventHandler (in AppKit)
0x90ef4fc3: DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) (in HIToolbox)
0x90ef43fd: SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) (in HIToolbox)
0x90f10e0e: SendEventToEventTarget (in HIToolbox)
0x90f4586d: SendHICommandEvent(unsigned long, HICommand const*, unsigned long, unsigned long, unsigned char, OpaqueEventTargetRef*, OpaqueEventTargetRef*, OpaqueEventRef**) (in HIToolbox)
0x90f6bfbf: SendMenuCommandWithContextAndModifiers (in HIToolbox)
0x90f6bf7c: SendMenuItemSelectedEvent (in HIToolbox)
0x90f6be7e: FinishMenuSelection(MenuData*, MenuData*, MenuResult*, MenuResult*, unsigned long, unsigned long, unsigned long, unsigned char) (in HIToolbox)
0x90f48b1e: MenuSelectCore(MenuData*, Point, double, unsigned long, OpaqueMenuRef**, unsigned short*) (in HIToolbox)
0x90f48509: _HandleMenuSelection2 (in HIToolbox)
0x90f4837d: _HandleMenuSelection (in HIToolbox)
0x93318f77: _NSHandleCarbonMenuEvent (in AppKit)
0x9327fc72: _DPSNextEvent (in AppKit)
0x9327f08e: -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] (in AppKit)
0x0036228e (in Aperture)
0x932780c5: -[NSApplication run] (in AppKit)
0x00960e5a (in ProKit)
0x00003872 (in Aperture)
0x00003799 (in Aperture)

Where is the Print Settings Dialog?

Hello everyone,
I was trying to print sheet music from my Sibelius application. It would not print the final bar. I changed the black ink on my Canon i850 and updated the driver. Still the final bar would not print.
I posted my issue on the Sibelius discussion site and was told to open the File>Print dialog, go to the Print Settings dialog, then set "substitute resolution" to 300, if I am using Mac OS 10.4.
I am using Mac OS 10.4.6. I tried to follow the instructions but I couldn't because I could not find a Print Settings dialog.
How can I find 'Substitute resolution' in my computer?

Hi there,
When you click File you should have 'Page Setup' and 'Print' as menu options.
If you select 'Print' you will see the print dialog window. If you do not see a menu that is defaulted to 'Copies & Pages', then the application may have what is called a Simplified Print dialog, similar to what you get with Preview. But you should have an option to select Advanced, which will open the normal print window. Here you should be able to select your resolution, depending on which driver you are using for the i850.
The other thing I would check is File > Page Setup. If the sheet is set to A4 but your printed page is set to Letter, then you can loose about 20mm (which is close to an inch) from the bottom of the print (FYI - A4 is 297mm long while Letter is 279mm).
Regards,
Paul

CS3 crashes at "Print Settings" dialog

I'm using an Epson 2200 with Leopard 5.1 and a G4 DMD. I can print in any application so long as I don't try to open "Print Settings." Crashes every time. I can't select paper types or print quality without Print Settings, so high quality printing is impossible. I've repaired permissions, repaired the disk, removed and re-installed the printer, even tried re-installing CS3, no luck. Here's the first part of the crash report:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE AdobeCrashReport SYSTEM "AdobeCrashReporter.dtd">
<crashreport version="1.1" crVersion="2.5.0.02272007" applicationName="Photoshop" applicationVersion="10.0" build="10.0 (10.0x20070321 [20070321.m.1480 2007/03/21:16:39:00 cutoff; m branch]), ©1990-2007 Adobe Systems Incorporated">
<time year="2007" month="11" day="21" hour="15" minute="26" second="5" />
<user guid="BDD822D5-E3BA-4670-B1E3-0CDBD5944E00" />
<system platform="macintosh" osversion="10.5.1" applicationlanguage="en" userlanguage="English" oslanguage="en_US" ram="2048MB" machine="Power Macintosh" model="PowerMac3,6" cpuCount="2" cpuFreq="1249MHz" busFreq="166MHz" />
<crash exception="Read Only Memory Exception" instruction="80430008">
<backtrace crashedThread="0">
<thread index="0">
Anybody have any ideas? FWIW, I get the same problem now in CS2. I have no idea what to try next.
Thanks!

Hi John, Thanks for the tip. I will try that next. Below is a crash log. I printed to the 2200 from Photoshop, then in the print dialog tried to go to "color management" to turn color management off (I am getting magenta prints due to double profiling).
Before crash:
11/22/07 2:20:22 PM Adobe Photoshop CS3[2548] * _NSAutoreleaseNoPool(): Object 0xb66c840 of class NSCFNumber autoreleased with no pool in place - just leaking
Stack: (0x9631c178 0x9624a0f8 0x29d21c8 0x29d2864 0x29d1320 0x29d15bc 0x29d0cec 0x29d0b08 0xce4370 0xce4484 0xce55b8 0xce5db0 0x7f3490 0x7f54d8 0x8fb23c 0x2bd684 0x2bdb00 0x370c 0x3410)
11/22/07 2:20:22 PM Adobe Photoshop CS3[2548] * _NSAutoreleaseNoPool(): Object 0xa832c50 of class NSCFNumber autoreleased with no pool in place - just leaking
Stack: (0x9631c178 0x9624a0f8 0x29d2240 0x29d2864 0x29d1320 0x29d15bc 0x29d0cec 0x29d0b08 0xce4370 0xce4484 0xce55b8 0xce5db0 0x7f3490 0x7f54d8 0x8fb23c 0x2bd684 0x2bdb00 0x370c 0x3410)
11/22/07 2:20:23 PM Adobe Photoshop CS3[2548] * _NSAutoreleaseNoPool(): Object 0xb68ceb0 of class NSCFNumber autoreleased with no pool in place - just leaking
Stack: (0x9631c178 0x9624a0f8 0x29d2240 0x29d2864 0x29d1320 0x29d15bc 0x29d0cec 0x29d0b08 0xce4370 0xce4484 0xce55b8 0xce5db0 0x7f3490 0x7f54d8 0x8fb23c 0x2bd684 0x2bdb00 0x370c 0x3410)
After crash:
11/22/07 2:22:52 PM Adobe Crash Reporter[2601] Process Id:
11/22/07 2:22:52 PM Adobe Crash Reporter[2601] 2548
11/22/07 2:22:52 PM [0x0-0xeb0eb].com.adobe.Photoshop[2548] 2007-11-22 14:22:52.079 Adobe Crash Reporter[2601:10b] Process Id:
11/22/07 2:22:52 PM [0x0-0xeb0eb].com.adobe.Photoshop[2548] 2007-11-22 14:22:52.081 Adobe Crash Reporter[2601:10b] 2548
11/22/07 2:22:59 PM com.apple.launchd[223] ([0x0-0xeb0eb].com.adobe.Photoshop[2548]) Exited: Terminated

I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Image looks great in PS- when I go to print it looks grainy in printer preview dialog box and prints blurry. Why?

Image looks great in PS- when I go to print, it looks grainy in printer preview dialog box and prints blurry. Why is this happening?

PS CC, Yosemite, Epson 3880 (called espson to make sure it wasn't something with that), saved as a tiff/psdjpg- all files behave the same way. When I open the raw file- and only crop the image- it behaves this way now- with grain and blur when printing. No other files do this in the same shoot. I worked on this image- could something have gotten corrupted along the way such that now even opening the raw file creates this problem. SInce upgrading my computer - a window pops up when I open PS that says I need to update my graphics card?? for 3D- I'm not using 3D- so I don't know if that means anything. I have to leave for about an hour- but greatly appreciate any feedback. I will be in touch. Thank you.

Print Settings tab in the Print module is missing? (Windows 7)

The "How To" books always refer you to the Print Settings tab in the print module, but there isn't one in my Lightroom? How do I get around this?

Not sure which "How to" books you're referring to so hard to answer this. Which specific settings are you wanting to change/control?
(..but if it's actual settings within the Printer's control software then it's accessed by clicking on the printer button at the bottom of the panel.)

[FIX] Darker prints and color shifts when printing from Lightroom 2

Hi,
The problem :
When printing RAW or TIFF files from LR2, you get a printer output that
is much darker than it should be and that presents various color shifts.
I'm using an Epson Stylus Pro 3800 with the latest Windows driver
(6.50 - which is rather old by the way). The workaround described below
works for me under Windows XP SP3. It should also probably work with
other systems/printers/drivers. Use at your own (minor) risk.
The "official" procedure for printing from LR is as follows:
1. Do not let the printer manage colors and select "Other..." from the
profile dropdown list and select the ICC/ICM paper/printer profile that
you want to use.
2. Click on Print... in LR which opens the Print Settings dialog.
3. Select the options you need and the paper you're using.
4. **Disable the color management from the driver's side** (in Epson's
drivers, "Mode | Custom | No Color Adjustments").
5. Print
Unfortunately, **this doesn't work** for many of us and this produces a
print that is dark and has color shifts as mentioned above. Note that
the same image prints correctly from QImage or Photoshop CS3 (that is,
the printer output corresponds to what you see on your calibrated
display).
Apparently, although color management has been (allegedly) disabled in
the driver, there's something wrong between LR and the driver which
makes that *both* LR and the driver are still trying to manage colors.
In other words, the "No Color Adjustements" option of the driver doesn't
seem to work with LR.
The workaround (found after hours of hair pulling and paper and
expensive ink wasting):
In step #4,
1. Instead of selecting "No Color Adjustments", set Mode to "Custom |
ICM
2. Click Advanced...
3. Check "Show all profiles".
4. Select Driver ICM (Advanced)"
5. Set **both** the "Input profile" and the "Printer profile" fields to
the very same profile that you specified in LR.
That is, if you specified Pro38 PGPP (Premium Glossy Photo Paper) in LR,
then also select Pro38 PGPP in both "Input Profile" and "Printer
Profile". This has actually the same effect has disabling color
management in the driver (what "No Color Adjustements" should normally
take care of).
That's it. When printing, you'll get exactly the same color results as
when printing from QImage or Photoshop. No more dark prints. No more
color shifts.
One might think that the bug is in the Epson driver but in that case,
QImage would have the very same problem. So I tend to think that the bug
is on the Lightroom side.
Note: Although Photoshop CS3 produces a correct printer output, it
demonstrates the same problem as LR when using the "Match Print Color"
option for soft proofing. But in that case, only the preview colors are
wrong. The printer output is ok. Which also tends to demonstrate that
Adobe has the problem, not Epson. Or maybe both... :-) .
Don't ask me why some users have the problem and other don't.
Hope this helps.
Patrick Philippot
MainSoft Consulting Services
www.mainsoft.fr

A sincere thank you for your reply, Michael. Sorry about the "it just doesn't make sense" shortcut. I have been trying to solve this issue since LR 1.1, spending dozens of hours on different trials and digesting everything written on this forum and the B9180 forum about color management and double profiling. My shortcut was a summation of my experience (and my frustration) but doesn't really advance the conversation. Here are some data that should be more useful in diagnosing the problem.
I am running Windows XP SP2. I calibrate my monitor monthly with the Spyder. The reason I suspect this may be an issue of double profiling is because the results (moderately strong magenta overlay plus an increase in contrast) match what more knowledgeable people than I on this forum describe when double profiling occurs. Perhaps I shouldn't presume it is double profiling, and follow Patrick Philippot's lead in naming the problem "color shifts." Patrick does refer in post #2 of this thread, however, to obvious double profiling.
I certainly do have a successful and consistent print method. With PS CS3, and either my Epson 1280 or my HP B9180, the output is almost always dead on. Here is how I do it. In PS from the print dialog box, under color handling I always choose "Photoshop manages colors." Then under printer profile I select the profile designated by the manufacturer for a particular paper/printer combination. Then in the printer driver I disable printer control of color. With the Epson I check the box "Off (No Color Adjustment)." With the B9180 I choose the option "Application Managed Colors." While I sometimes may tweak the final output, these procedures have served me well with PS for several years.
Contrasted with my positive PS experience, my experience with LR printing has been inconsistent. I regret having to be so imprecise but truly sometimes LR produces accurate results that match the calibrated monitor, but most of the time it does not. I use standard procedures with LR that parallel the PS ones described above. In LR's printing panel, under color management, I specify the correct profile, just as I did for PS. Then in the printer driver I use the same procedures I use with PS. Most of the time the prints have the magenta overlay and too much contrast.
BTW, the inconsistent LR printing only takes place with my HP B9180. I have never had any problem with off-color LR prints with my Epson 1280. Again, I emphasize that I have standard procedures that always work with PS (no matter which printer) and LR (but only with the Epson).
Unfortunately the LR printing problems are intermittent. Some of the time (perhaps 20%) LR produces fine prints in the B9180, indistinguishable from PS prints. When LR is printing well, it will continue to print fine until "something happens" and the output shows the color shift. This means I do not get a random sequence of good-bad-good-bad prints, but rather good-good-x factor-bad-bad-bad. Ths problem is that I do not know what this "x factor" is. Once, when LR was giving me accurate output, I simply changed the default printer (Control Panel-Printers and Faxes) from the B9180 to my Samsung 1430 laser; immediately afterwards the LR output colors shifted. Did LR react to this change in default printers? Another time I had good LR printing success with version 1.2 but ran into the problems described above when I upgraded to version 1.3.
Sorry for the long post. I am hoping that someone will see something that I am missing and provide a hint. I think, though, that Patrick is correct when he states, "I tend to think that the problem is with LR. After all, similar issues (obvious double profiling) are observed only in LR but with various printers."

TS3147 Where are all the print settings for my HP Officejet 5510 in Mac OS X 10.8.2? I can't find Normal, just Draft and Best.

Where are all the print settings for my HP Officejet 5510 in Mac OS X 10.8.2?? I only have Fast, Fast B & W, and Best. I want Normal so that it looks good but doesn't print so slowly. Help.

Hi,
Change the print settings manually by clicking the lowest drop-down within the print dialog (e.g. the application name, Copies & Pages within MSOffice.
Select Type/Quality and set the print quality as Normal.
You may seve the settings as a Preset from the Presets drop-down menu.
Shlomi

For some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?

for some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?

Open the Mac App Store on the other Mac and in the Quick Links sign into your account. See if the Mountain Lion purchase is among hidden apps in the iCloud area of your account info.

My links don't work when I combine another file with the pdf

My internal bookmarked links don't work when I combine another file with the pdf.
The external links continue to work fine, though.
This doesn't make any sense to me at all ... but I'm hoping one of you kind folk can help?

I opened my file and instead of merging files I used insert pages and inserted all of the pages from the file I wanted. Then I saved the file with
the same name. Attached is a rough draft of some helpful hints I put together. This has been a very painful process for us to discover how to handle
this and there really is not much help from Adobe.
Instead of merging files you inset pages. In Acrobat select Document - Insert pages -From file. You can select all pages or some and where you want them inserted. After you do that save the file not save as and all of your links should work. If you combine files or merge files all of the links will break.
                                                                                GillHarley <[email protected]>
05/07/2009 09:54 AM                                                                                To
                                                                    "Christine Salmon" <[email protected]>
cc
                            Please respond to
[email protected]                                                                                 Subject
                                dobe.com                            Acrobat Windows My links don't work when I combine another file with the pdf
                                                                    29k833-1Kp0-8ahk
I think it's something to do with naming, but I can't figure out what. This is because it asks to be saved and gives me a Binder no as the name. If I
press Cancel at that point, I keep the file and the links. But as soon as I need to close it, it asks me again 'Do you want to save this file' and if
I say 'Yes', I lose all the links, and if yet if I say 'No', I lose the whole file. So at some point it has to be saved but whether I keep the Binder
no name when I save it, or use the original name, it makes no difference ... it is in the saving of it that it looks the functionality, and yet, if I
don't save it, I lose the file.
This makes no sense to me....I hope it does to one of you.
For instance, Christine, how did you keep your file if you couldn't save it?
Or have I misunderstood?

Print settings dialog box missing in lightroom 3.3

The Print Settings selection has mysteriously disappeared. I have the other functions like "Layout", "Color Matching", Printer Features", ect. The missing setting is, however, available if I print out of PS5. The "Print Settings" in Lr is not greyed out or has a slash thru it. The menu item is not listed as a choice. Thanks, Bob c.

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Can't get proper HP printer settings dialog, only featureless generic Windows Print settings.

So I have an HP Deskjet 3050 J610, connected via wifi. I can print from it just fine, but I only have the standard Windows printing options, which are very limited. I don't get any color options, or printing on both sides, or anything like that. Basically my only options are "print in grayscale" and "print in Max DPI". So I presume I am using generic printer drivers, instead of the proper HP drivers. I remember I once had it working right, and it had a nice HP dialog with pictures that would ask me if I want to print for a presentation, or draft, or print on both sides, etc.
But I already have the proper HP drivers installed. So I run "HP Deskjet 3050 J610 series.exe" in the HP printer drivers folder. I click "connect to a new printer". I click 'wireless'. It finds my printer. I select it under "model name", and press 'next'. It sets up the printer properly, but when I try to go and print with it, I'm still presented with the crippled generic windows print dialog!
How do I get the nice HP drivers settings dialog back again?
EDIT: I'm on Windows 8.1 Preview. I have also tried to set up the printer on a Windows 7 laptop, using the same driver download from the official HP website, and that laptop too also only gets to use the generic windows printing dialog! What am I doing wrong?

bonsguy wrote:
the same info is not under Help or in the Pages manual under printing options.
Perfectly normal.
The Print dialog doesn't belong to Pages but to the operating system.
So, it's use is described in the operating system help.
Here is an example of what we may find in this help :
Yvan KOENIG (VALLAURIS, France) vendredi 10 juin 2011 16:13:18
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Print Preview is missing from Firefox 6 on Mac OSX Lion in both File Menu and Print Dialog Box

The question says it all really. Print Preview option is missing from both the File menu and from the Print dialog box when you select Print. I use Print Preview a lot to avoid wasting paper.
A relevant issue might be that the Mac OSX app Preview is currently having trouble with various printers including my Xerox and so, temporarily, the default application for all Preview items is now Adobe Reader until Apple get their act together. Perhaps this is affecting things?
Thanks for any help

It's moved to the PDF dropdown, "Open PDF in Preview"

Printer Settings dialog missing when printing to another Mac with Bonjour

Similar Messages

Maybe you are looking for