Printer setup for Warehouse Management

Hi ALL:
Where do I setup the printers for Plant / SLoc / WH number except for transaction OMLV...
Thanks.
Wynand.

Wynand,
not quite sure this is after but see tx SPAD (this is more the Basis side of printer set up).
Regards,
Nick

Similar Messages

  • Printer Setup for Aperture and Epson R1800

    After installing the upgrade to 1.5, something went wrong with my printer setup for both my R1800 and my PictureMate Deluxe.
    I've done the following:
    Reset the printer system.
    Reinstalled the Drivers
    Attempted to Print from Aperture using about 30 + combinations of settings.
    I'm still getting colors that are off and overall dark photos.
    Best Setting appears to be
    Printer Settings
    Print Settings
    Media Type: Premium Glossy Photo Paper
    Color: Color
    Mode: Advanced (Photo, High Speed, Finest Detail, Off)
    Color Management
    Off (No Color Adjustment)
    ColorSync Profile: SPR1800 PrmGlsy Photo.icc
    Black Point Compensation = Checked
    Gamma 1.10
    The resulting pictures appear to be about 1 f-stop or so underexposed and the colors are off (I'm color blind, so I can't say exactly how). I know that it is the setup of the printer settings. If I print the same pictures from Nikon Capture on my Windows computer, the print is perfect. I prefer to use Aperture for my photo work.
    Epson doesn't have Aperture and doesn't understand all of the settings. The Apple Care support tech stated that he is not qualified to answer and said to call back when the Aperture team is working. I've got a ton of Christmas gifts to print out!
    Assistance would be greatly appreciated.
    Thanks,
    -William

    william:
    you don't state in your original posting whether or not you've calibrated your monitors, especially to a 2.2 Gamma. in order to get the most accurate screen->print matching you have to hardware calibrate your monitors. this is by far the single most significant improvement i've made in my workflow. prior to calibration my monitors were set to a gamma of 1.8 which is much brighter than 2.2 and this causes you to NOT correct your images with the additional exposure required for proper printing. my prints were always too dark prior to calibration.
    the spyder 2 from color vision is an excellent choice.
    scott
    PowerMac G5 2.5GHz   Mac OS X (10.4.8)   MacBook Pro 2.0GHz

  • Extractors for Warehouse Management

    Is anyone aware if there are any extractors for Warehouse Management.  I am working on a Retail project? Thanks

    Hi,
    Check these links would help you,
    BW Retail content
    Re: BW retail content
    Re: BW IS Retail
    With rgds,
    Anil Kumar Sharma .P

  • BPP for warehouse management

    Can anybody gives the BPP for warehouse management. and also qand db for the same

    HI Ram,
    could you pls forward the same to me also...my id is [email protected] / [email protected]
    thnx..
    SOUMYA

  • Companycode 9650 is not setup for materials management

    Hi all,
    i am loading  data from r/3 to CO cube 0copc_c10 from a custom defined datasource.I am getting error as "Companycode 9650 is not setup for materials management". i have checked in rsa/3.there also its throwing same error while displaying (but its showing 2056 records are selected).Dont know what to do.Any help?
    Regards,
    Murali.

    Hi Roberto,
    here is the message i see :
    No cost estimate found for material item 00016 in itemization
    Message no. CK 375
    Diagnosis
    The system could not find a cost estimate for material item 00016 in the itemization of material 1278.357.233 in plant 0800.
    It is possible that the cost estimate for this material has been deleted.
    Procedure
    You can display the costs for this material referenced to cost component view 01.
    The costs for material item 00016 correspond to the cost component view in the costing type in Customizing for Product Cost Controlling. If the costing type does not contain a cost component view, the system displays the costs for the cost components that are flagged as being relevant to stock valuation.
    And DATA SOURCE WAS BUILT ON FUNCTION MODULE(Custom defined).
    regards,
    Murali.

  • What are all the Standard Data targets&Data source for Warehouse management

    Hi,
    What are all the Standard Data targets & Data source for Warehouse management.
    Thanks,
    Ahmed.

    HI,
    the master data
    1.equipment data --IE01
    2.All functional locatiions -IL01
    3.Maintainnace work centers - IR01
    4.Task list data - IA05
    4.Schedule maintanence plan
    6.Strategies
    7.Measuring points
    8.Characters for calibration
    9.Equipemnt BOM
    10.Material BOM
    Regards,
    Anddra

  • Metalink Note for Warehouse Management System Testcase Repository

    Hi Friends,
    Please share the meatilink note id for Warehouse Management System Testcase/ Testscripts Repository.
    Thanks and Regards,
    A

    if you have open transactions, such as deliveries, then you may not be able to process them further.
    But do you really close all transactions in a test system?
    It will not have any harm to new created documents

  • How to save print setup for pdf file so that every user can open and print w/o manually performing?

    Can is there a way to configure the print settings (i.e. paper size, orientation, etc.) and save this setting as part of the pdf file? I would like the users of pdf files to be able to open the file and simply print, without having to manually configure the print settings.

    Not sure if this will help. I got this information from the built-in help under Acrobat 9.
    Advanced
    Lists PDF settings, print dialog presets, and reading options for the document.In the PDF settings for Acrobat, you can set a base Uniform Resource Locator (URL) for web links in the document. Specifying a base URL makes it easy for you to manage web links to other websites. If the URL to the other site changes, you can simply edit the base URL and not have to edit each individual web link that refers to that site. The base URL is not used if a link contains a complete URL address.
    You can also associate a catalog index file (PDX) with the PDF. When the PDF is searched with the Search PDF window, all of the PDFs that are indexed by the specified PDX file are also searched.
    You can include prepress information, such as trapping, for the document. You can define print presets for a document, which prepopulate the Print dialog box with document-specific values. You can also set reading options that determine how the PDF is read by a screen reader or other assistive device.
    Create print presets
    A PDF can contain a set of print presets, a group of document-specific values that is used to set basic print options. By creating a print preset for a document, you can avoid manually setting certain options in the Print dialog box each time you print the document. It’s best to define print settings for a PDF at the time that you create it, but print presets provide a means to add basic print settings to a PDF at any time.
    Choose File > Properties, and click the Advanced tab.
    In the Print Dialog Presets section, set options and click OK.
    The next time you open the Print dialog box, the values will be set to the print preset values. These settings are also used when you print individual documents in a PDF Portfolio.
    Note: To retain a print preset for a PDF, you must save the PDF after creating the print preset.
    Print Dialog Presets
    Page Scaling
    Prepopulates the Page Scaling option in the Print dialog box with the option you choose:
    Default
    Uses the application default setting, which is Shrink To Printable Area.
    None
    Prevents automatic scaling to fit the printable area. This setting is useful for preserving the scale of page content in engineering documents, or for ensuring that documents print at a particular point size to be legal.
    DuplexMode
    For best results, the selected printer should support duplex printing if you select a duplex option.
    Simplex
    Prints on one side of the paper.
    Duplex Flip Long Edge
    Prints on both sides of the paper; the paper flips along the long edge.
    Duplex Flip Short Edge
    Prints on both sides of the paper; the paper flips along the short edge.
    Paper Source By Page Size
    Selects the option by the same name in the Print dialog box. Uses the PDF page size to determine the output tray rather than the page setup option. This option is useful for printing PDFs that contain multiple page sizes on printers that have different-sized output trays.
    Print Page Range
    Prepopulates the Pages box in the Print Range section of the Print dialog box with the page ranges you enter here. This setting is useful in a workflow where documents include both instruction pages and legal pages. For example, if pages 1–2 represent instructions for filling out a form, and pages 3–5 represent the form, you can set up your print job to print multiple copies of only the form.
    Number Of Copies
    Prepopulates the Copies box in the Print dialog box. Choose a number from 2 to 5, or choose Default to use the application default, which is one copy. This limitation prevents multiple unwanted copies from being printed.
    Thanks.

  • AP Check printing setups for printing checks on your own

    HI
    I am wondering if there a good document which deals with AP check printing with MICR and signature on your own check stock
    thanks

    Recently we started to deal with AP check printing in our organizatin. It was a daunting task with the information and resources scattered all over and missing critical pieces of information to make sense out of the whole process flow. We attempted to go through the AP check printing internally and succeded.
    I decided to post the information for the benefit of people about the our experience
    Check Printing Basics and Beyond for Printing Checks on Your Own
    by
    Sarma Chilukuri
    This article deals with what is needed to get your own checks printed. It is a first attempt to uncover all the hidden rules that one should be aware to get your own checks printed. The first section deals with the basic AP check printing setup, while the 2nd half explores some of the flow of events that make it possible to print the check.
    Part I – Basic Setup
    AP Setup for check printing
    There are multiple steps in the AP check printing. First set of steps deal with the AP side setups. The second step is to get the System side setups. The system side setup deals with printer setup and program options setups. The last step would be to make the print format files configured with the vendor provided escape sequences in the laser print format file.
    Step 1: login as Payable Manager
    Step 2: Bank Setup: Navigate to Setup: Payments > Banks
    1.     Make sure the Bank # etc are present
    2.     Tab to “Bank Accounts”, and make sure your account # has been setup
    3.     On the Bank Accounts screen, tab to the “Payables Documents” and verify that Payment format (E.g., COK Laser Format) has been entered. This “Payment format links to next section where we associate it to the right payment program.
    Fig 1. AP Payment Bank Setup Screen
    Step 3: Program Setup (Setup: Payments > Programs)
    As we know there are only 5 formats 3 of which are “Ever Green Laser” (APXPBFE G|L|F) which are explained in the AP Users Guide. For your own form printing, you have to associate the format to APXPFEL (laser format) program. Also, the APXPBFEL or APXPBFEF call the APXPBFEG, which is the base program that pulls the data from oracle base tables. APXPBFEL is the one which allows us to print the checks with MICR and signature on a plain paper not on a pre printed stationery.
    Fig. 2 AP Payment Format Setup Screen
    Printer Styles, Drivers setup
    The above process summarizes the AP Setup. As a DBA, the printer setup needs to be validated. The base install provides the right setup to some extent. But the differences in printers and print queues may add some complexity to the final configuration. The following section discusses the set up the base install provides and changes as needed.
    Step 1. Login as system Administrator
    Step 2: Style (Install : Printer > Style)
    Look for the “PORTRAITHPLJ4LASCHECK”. This one is associated with the SRW Driver Called, “APLASP” (AP Laser printer format).
    Step 3: Driver (Install : Printer > Driver).
         1. The “PORTRAITHPLJ4LASCHECK” is associated with a “User Driver” of PORTRAIT for HPLJ4 and and a SRW driver of “APLASP”
         2. Also notice that there is an Initialization string at the bottom of it. This initialization string gets called as pre-report trigger for the APXPBFEG program (APXPBFEG.rdf) file. It sets the kind of format it should be. Please see the Appendix A for details on these printer pcl code translations. The Initialization string was as follows:
    Initialization: /eE/e&l0o2a7C/e(s0P/e(8U
    Step 4: Printer type (Install : Printer > Register)
    Each printer type is associated with a set of styles. Make sure the printer that was selected has the above style and its associated driver listed against that.
    Fig. 3 System Administrator Printer Seups
    Step 5: Program Setup (Concurrent > Program > Define)
    This step holds the key for check printing. It is necessary to define whether you need the check on top followed by the Stub or the other way around. The way it is controlled is based on the APXPBFEG.rdf, the report definition file and the APLASP.prt (Printer Style associate with the Portrait laser check format SRW driver). The APLASP.prt file ($FND_TOP/reports) has two identical setups called the 100 series and the 200 series. Those identical sets of setups define where the MICR and signature print on the check. The following table lists the some of the codes in the 100 series. Please refer to Doc ID #146452.1 for complete details.
    Fig. 4 System Administrator Concurrent Program Definitions
    CODE #     Code Definition
    100     Electronic check activation string
    101     1st Check #
    102     2nd Check #
    104     Deactivate check number mode string
    111     Activate MICR line
    112     MICR Deactivation / reset the printer head position
    121     1st Signature
    122     2nd Signature
    141     Address font activation string
    199     Return to default state string
    Table 1. APLASP.prt -- MICR Activation Codes
    The above code block repeats itself the same way in the 200 series. The decision to activate one way or the other controls the Check printing.
    Step 2: Setting up the Option block
    In the concurrent program definition for the APXPBFEL, there is an Options block in the middle. You need to list the codes that you want to activate. Please refer to Doc ID # 186640.1 for some explanation on these.
    E.g.,
    p_printer_code_mask="201,211,221,241" p_sig2_amount="" p_sig3_amount="" p_sig1_vendnum="" p_sig2_vendnum="" p_sig3_vendnum="" p_country_to_ignore="US" p_continuous_stationery="N"
    Step 3: Output format is Text
    Text format is sufficient, as the printer will pick up these escape sequences anyway.
    Fig. 5 System Administrator Concurrent Program APXPBFEL Options Definition
    UIPRINT.TXT, UIFONTS.ALI
    One needs to be aware of a few more pieces in this puzzle. The UIPRINT.TXT identifies to the Oracle Applications the print queues that were setup. This file is needed to set your PCL / Post Script printer definitions. I did not have to really tinker with these files other than identifying the PCL and Post Script Q’s that were setup on the UNIX box.
    Part II: Integrating all the pieces
    The above setups are all documented in various articles. We need to understand a few more steps to see how all these pieces come together.
    What you need to know about APXPBFEG.rdf
    APXPBFEG (.rdf) is the report file which when called pulls the data from Oracle. If you open the APXPBFEG.rdf in the Oracle reports, there is initialization to the report called, SRW.Init. This will bring in the initialization string associated with the PORTRAITHPLJ4LASCHECK driver definition file. Also, please be very careful with this report format file. When you open it, there is small tiny empty block. in the first block which calls the printer initialization code 100/200 under the Format Mask (from APLASP.prt). If this portion gets changed or messed up, one can end up with some unexpected results. Each of those blocks like MICR, CHECK etc… have associated format triggers and printer codes.
    Please make sure that the printer mask is properly handled. I noticed that the 200 series MICR (211) and Signature (221) printer masks were tied to 111 and 121 respectively. These should have been 211 and 221. The other place you need to be careful was the printer code before and after is proper.
    For E.g.,
    For the MICR, the ”printer code before and after columns “ should be 111 and 112 (or 211 / 212) respectively while Format Trigger should reference to 111 (211).
    Fig. 6 APXPBFEG rdf file printer mask and Format Triggers
    The escape sequences in the APLASP.prt file for these codes will play the crucial role in getting our format around the report output that gets generated from the APXPBFEG program. Please refer to the explanation of these escape sequence codes in the APPENDIX A.
    At this point when you run the program, you will see that the formatted output report file will have all the initialization strings and the output associated with that. You can compare the fields and verify the results. Let us closely examine the parts of the 111 and 121 where the micr and signature prints. The key to this to code the escape sequences the right way to get the associate MICR and signature print out correctly.
    Fig. 7 APXPBFEG rdf file MICR printer mask and Format Triggers
    Code 111 and Code 112 from the APLASP.prt file.
    I broke the line into pieces to illustrate the exact escape sequence code.
    Code "211"
    Part 1: esc "&f0S" esc "&f0y0X" esc "&l0E" esc "&a0L"
    Part 2: esc "(8M" esc "(s0p8.00h8.0v0s0b80T" --- This will be provided by the ROM
    Cartridge provider
    Part 3: esc "&k15H" esc "*p3215Y" esc "&a13.8C"
    code "212"
    Part 1 : esc "&f1x3x8X"
    Part 2 : esc "&f1S"
    Let us go over these 2 sets of codes carefully.
    Escape Code     Meaning     Comment
    esc "&f0S"      Push Cursor Position     
    esc "&f0y0X"     Define Macro ID 0 and Start Macro Definition     
    esc "&l0E"      Define Top Margin at 0 Lines     
    esc "&a0L"      Define Left Margin at Column 0     
    esc "(8M"     8M Symbol SetNote : As per pcl codes this happens to be Font Primary JIS Math 8 symbol     MICR Part 1 : Provided by the Vendor from where you the ROM cartridge
    esc "(s0p8.00h8.40s0b0T"     {Fixed Pitch}{pitch 8.00 cpi}{Font Style 8.40}{Medium Weight}{Typeface 0}     MICR Part 2 : Provided by the Vendor
    esc "&k15H" esc "*p907Y"     Set HMI = 15/120" Vert position = 907 Dots     
    esc "&a13.8C"     Move to Column 13.8     
         CODE 112     
    esc "&f1x3x8X"     {End Macro Definition}{Call Macro}{Delete Macro ID}     
    esc "&f1S"     {Pop Cursor Position}     At this point, the MICR gets printed
    Table 2. Escape Sequences in APLAP.prt file Explanation
    Fig. 8 APXPBFEG rdf file Signature printer mask and Format Triggers
    The signature piece (221) has also similar meaning.
    Escape Code     Meaning     Comment
    esc "&f0S"     Push Cursor Position     
    esc "*t300R"     300 DPI Graphics resolution     
    esc "*p1500X"     Horiz position = 1500 Dots     
    esc "*p650Y"     Vert position = 470 Dots     
    esc "(4B" esc "(s1p53v0s0b102T"esc "&f0S!"     Symbol SetProportionalPoint Size 53UprightMedium WeightTypeface 102Push Cursor Position!     Vendor gave the us esc "(4B"esc"(s1p53v0s0b102T!"Note: the ! when the it pushes the ! and that is where it prints the signature piece. The first part forms the symbol set , say (4B and the later part forms the signature font and ! is the piece. I took the ! from the above and let it stay with the 3rd part of it so that signature does not print twice.
    esc "&f1S"      Pop Cursor Position     
    esc "*p+121Y"     Move down 121 Dots     
    esc "&f1S"     Pop Cursor Position     
    Table 3. Escape Sequences for Signature in APLAP.prt file and Explanation
    Summary
    One can print their own checks using the above steps. This can work as a cost effective solution for small organizations where the budgetary constraints are tighter. We are successful in getting the AP Checks printed using the above method.
    References
    Metalink Doc ID # 186640.1, Different Payment Formats …
    Metalink Doc ID # 60936.1, Step by Step Guide to Setup a Printer in Oracle Applications
    Metalink Doc ID # 250543.1, How to Create An Initialization String for a Payable Check Format
    Metalink Doc ID # 48680.1, Accounts Payable FAQ – Payment Batch, Check
    Metalink Doc ID # 1074792.6, Exclamation Point (!) Prints On Check When Using APXPBFEL And Cartridge
    Metalink Doc ID # 158486.1, APXPBFEL Evergreen (Long Laser)
    Metalink Doc ID # 146452.1, Listing of p_printer_code_mask Default Values for APXPBFEL
    Chapter 2, Oracle Payables user guide
    Appendix A
    APLASP.prt printer codes explanation
    code "200" esc "&l0o2a6d66p8.000c2e1x0l63f1H" esc "&k12.00H" esc "(8U"
    esc "(s0p10.00h12.00v0s0b3T" esc "&k11.75H" esc "&a1l0R" control(M) esc"&f3005y4X"
    {Portrait}
    {Letter}
    {6 LPI}
    {Define Page Length to 66 Lines}
    {Set VMI = 8.000/48"}
    {Define Top Margin at 2 Lines}
    {Select 1 Copies}
    {Disable Perf Skip}
    {Define Text Length as 63 Lines}
    {Feed from Tray 1 (upper)}
    0.1 esc "&k12.00H"
    {Set HMI = 12.00/120"}
    0.2 esc "(8U"
    {Roman-8 Symbol Set}
    0.3 esc "(s0p10.00h12.00v0s0b3T"
    {Fixed Pitch}
    {pitch 10.00 cpi}
    {Point Size 12.00}
    {Upright}
    {Medium Weight}
    {Typeface 3}
    0.4 esc "&k11.75H"
    {Set HMI = 11.75/120"}
    0.5 esc "&a1l0R"
    {Define Left Margin at Column 1}
    {Move to Row 0}
    control(M)
    0.6 esc"&f3005y4X"
    {Define Macro ID 3005}
    {Enable Overlay}
    code "201" esc "&f0S" esc "&a1.25r70C" esc "(8U" esc "(s1p14v0s3b4148T"
    {Push Cursor Position} esc "&f0S"
    1.1 esc "&a1.25r70C"
    {Move to Row 1.25}
    {Move to Column 70}
    1.2 esc "(8U"
    {Roman-8 Symbol Set}
    1.3 esc "(s1p14v0s3b4148T"
    {Proportional}
    {Point Size 14}
    {Upright}
    {Bold}
    {Typeface 4148}
    code "202" esc "&f0S" esc "&a20.25r70C" esc "(8U" esc "(s1p14v0s3b4148T"
    {Push Cursor Position}
    2.1 esc "&a20.25r70C"
    {Move to Row 20.25}
    {Move to Column 70}
    2.2 esc "(8U"
    {Roman-8 Symbol Set}
    2.3 esc "(s1p14v0s3b4148T"
    {Proportional}
    {Point Size 14}
    {Upright}
    {Bold}
    {Typeface 4148}
    code "211" esc "&f0S" esc "&f0y0X" esc "&l0E" esc "&a0L"
    esc "(0Q" esc "(s0p8.00h8.40s0b0T" esc "&k15H" esc "*p907Y" esc "&a13.8C"
    {Push Cursor Position}
    11.1 esc "&f0y0X"
    {Define Macro ID 0}
    {Start Macro Definition}
    11.2 esc "&l0E"
    {Define Top Margin at 0 Lines}
    11.3 esc "&a0L"
    {Define Left Margin at Column 0}
    11.4 esc "(0Q"
    {0Q Symbol Set}
    11.5 esc "(s0p8.00h8.40s0b0T"
    {Fixed Pitch}
    {pitch 8.00 cpi}
    {Font Style 8.40}
    {Medium Weight}
    {Typeface 0}
    11.6 esc "&k15H" esc "*p907Y"
    {Set HMI = 15/120"}
    {Vert position = 907 Dots}
    11.7 esc "&a13.8C"
    {Move to Column 13.8}
    code "212" esc "&f1x3x8X" esc "&f1S"
    {End Macro Definition}
    {Call Macro}
    {Delete Macro ID}
    12.1 esc "&f1S"
    {Pop Cursor Position}
    code "221" esc "&f0S" esc "*t300R" esc "*p1500X" esc "*p470Y"
    esc "(30C" esc "(4B" esc "(s1p53v0s0b102T!"
    esc "&f0S!" esc "&f1S" esc "*p+121Y" esc "&f1S"
    esc "&f0S"
    {Push Cursor Position}
    21.1 esc "*t300R"
    {300 DPI Graphics resolution}
    21.2 esc "*p1500X"
    {Horiz position = 1500 Dots}
    21.3 esc "*p470Y"
    {Vert position = 470 Dots}
    21.4 esc "(30C"
    {30C Symbol Set}
    21.5 esc "(4B"
    {4B Symbol Set}
    21.6 esc "(s1p53v0s0b102T!"
    {Proportional}
    {Point Size 53}
    {Upright}
    {Medium Weight}
    {Typeface 102}
    21.7 esc "&f0S!"
    {Push Cursor Position}
    21.8 esc "&f1S"
    {Pop Cursor Position}
    21.9 esc "*p+141Y"
    {Move down 121 Dots}
    21.10 esc "&f1S"
    {Pop Cursor Position}
    code "222" esc "&f0S" esc "*t300R" esc "*p1500X" esc "*p650Y"
    esc "(30A" esc "(s0p.426h35.25v0s0b128T" esc "&f0S!"
    esc "&f1S" esc "*p+141Y" esc "&f1S"
    {Push Cursor Position}
    22.1 esc "*t300R"
    {300 DPI Graphics resolution}
    22.2 esc "*p1500X"
    {Horiz position = 1500 Dots}
    22.3 esc "*p650Y"
    {Vert position = 650 Dots}
    22.4 esc "(30A
    {30A Symbol Set}
    22.5 esc "(s0p.426h35.25v0s0b128T"
    {Fixed Pitch}
    {pitch .426 cpi}
    {Point Size 35.25}
    {Upright}
    {Medium Weight}
    {Typeface 128}
    22.6 esc "&f0S!"
    {Push Cursor Position}
    22.7 esc "&f1S"
    {Pop Cursor Position}
    22.8 esc "*p+141Y"
    {Move down 141 Dots}
    22.9 esc "&f1S"
    {Pop Cursor Position}
    code "241" esc "&a-100V" esc "&l5.8C" esc "(8U" esc "(s0p12.00h10.00v0s3b3T" esc "&k11.75H"
    41.0 esc "&a-100V"
    {Move up 100 Decipoints}
    41.1 esc "&l5.8C"
    {Set VMI = 5.8/48"}
    41.2 esc "(8U"
    {Roman-8 Symbol Set}
    41.3 esc "(s0p12.00h10.00v0s3b3T"
    {Fixed Pitch}
    {pitch 12.00 cpi}
    {Point Size 10.00}
    {Upright}
    {Bold}
    {Typeface 3}
    41.4 esc "&k11.75H"
    {Set HMI = 11.75/120"}
    code "299" esc "(8U" esc "(s0p10.00h12.00v0s0b3T" esc "&k11.75H" esc "&l6D"
    {Roman-8 Symbol Set}
    99.1 esc "(s0p10.00h12.00v0s0b3T"
    {Fixed Pitch}
    {pitch 10.00 cpi}
    {Point Size 12.00}
    {Upright}
    {Medium Weight}
    {Typeface 3}
    99.2 esc "&k11.75H"
    {Set HMI = 11.75/120"}
    99.3 esc "&l6D"
    {6 LPI}

  • T-codes for warehouse management

    hi.
    can anybody gives the mostly used t-codes for warehouse management

    SAP WMS - Decentralized Warehouse Management System Integration Setup
    You can operate the SAP Warehouse Management System (WMS) as a stand-alone decentralized system that is independent of a central Enterprise Resource Planning (ERP) System.
    You make the necessary settings for the ERP (Enterprise Resource Planning) system within the WMS component (Warehouse Management System).
    The steps are set up as a checklist and guide you through the process of configuring the system parameters.
    Checklist (For those with the Table Views used transaction code SM30).
    1. Customizing for "Enterprise Structure"
    - Create storage location in OX09 (if necessary).
    - Define warehouse number in Views V_T3001.
    (you should not copy the warehouse number in the ERP system)
    Activities within a warehouse, like goods movements and physical inventory, are assigned to a specific
    warehouse number.
    The physical warehouse where these activities take place is identified by the warehouse number.
    - Assign plant/storage location to warehouse number in Views V_T320.
    (Valid if the component MM-IM (Inventory Management) is implemented.)
    Fields : Plant + Sloc + WhN
    2. Customizing for "Decentralized WMS integration", section "Central processing" -> Application
    - Activate decentralized WMS in Views V_T340DM.
    - Define interface to Inventory Management in Views :-
    V_156S_WM - Assign WM movement type references to IM movement types
    V_T3211 - Delivery-Relevant Parameters for Reference Movement Type
    V_T340DL - Delivery-Relevant Data for Warehouse Number
    - Exclude stock in decentralized WMS in Views V_T321B
    (if the decentralized WMS is not an SAP R/3 system)
    - Finally do a consistency check for decentralised WMS in transaction OL20.
    3. Customizing for "Application Link Enabling (ALE)", section "Basis Components"
    Maintaining Logical Systems in Views V_TBDLS.
    Assign logical system to client in Views T000.
    4. Make basic settings for RFC in transaction BD97.(if necessary)
    5. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model"
    You can define the Reduce message types and Activate message types in transaction BD53.
    SAP recommends that you use message types :
    "MATMAS" (material master tables) and
    "DEBMAS" (customer master) as a template.
    Be aware that only those fields that are absolutely necessary are transferred from the master data tables in
    the ERP system to the decentralized WMS.
    6. Customizing for "Decentralized WMS integration", section "Central processing" -> Distribution
    Use transaction OL19 to generate distribution model. As far as the application is concerned, when the model
    is generated, application-specific Customizing parameters are modified or set (for example, activate
    decentralized WMS).
    Display or check distribution model
    Generate partner profile in transaction BD82.
    (you can also perform this activity using ALE Customizing)
    Distribute distribution model in transaction BD64 (model view) using menu item "Edit"
    If both the ERP system and the decentralized WMS are SAP R/3 systems, the distribution model should be
    distributed on a central basis only, that is, via the ERP system.
    7. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model" (transaction BD64)
    Activate the change pointers for master data distribution using transactin BD61.
    If necessary, reduce the message types concerned with transaction BD53.
    8. Customizing for
    "Logistics - General" - "Material Master" - "Tools" - "Data Transfer : Material Master" -
    -> "Define required-field check for ALE/Direct Input" (Views V_T130S)
    Define whether an error message should be generated in the receiving system for required fields
    from the material master.
    Reward points if useful.

  • Q&A db for warehouse management and inventory management

    Hello Everybody,
    i read on the help.sap website that standard as well as industry specific versions of Q&A db are available. but the website doesnt say where. i searched a lot but the links dont lead to the actual Q&A db.
    i would like to request you to kindly share the Q&A db for inventory management and warehouse management with me as i need it for preparing the AS IS documentation.(preferably automotive industry but if not then even standard Q&A db is fine).
    thanks a lot.
    sapman.

    Now QADB will not help to map the clinets requirement. Instead of QADB get AS IS information form Coreusers... thats best practice now....
    Go through www.sap-img.com for further details...
    Edited by: Ganti on Jul 26, 2008 7:26 AM

  • Printer Setup for HTML reports (Landscape)

    I'm trying to print an HTML report in Landscape, the Report Orientation VI only works with Standard Reports, and I can't find anything that will let me modify the "Printer Setup"
    Anyone done this?

    Jeff,
    To print an HTML report it first has to be rendered. To render HTML, you need a browser. For example, you can render HTML in either Internet Explorer or Firefox or Opera, and all three might render the same data slightly differently. To simplify the situation let's say that you're using IE. Once IE renders the HTML, you then have to get it to send the rendered output to the printer. So you can see why it isn't time or cost-effective for NI to try and necessarily support these functions. For the end user however, I'd guess that quite a few people have had this problem.
    I have had to do a lot of digging around to get HTML reports to print right. My solution has been to use an ActiveX container with an IWebBrowser2 object (Internet Explorer). This will let you load and print HTML reports programatically however (glancing back over some old code) I don't see immediately how you can print a report in Landscape. With an ActiveX container however you can call the IE print preview function which will let you (the user) modify the report printing to Landscape. It's not a programmatic solution since you have to interact with the GUI but it works. Also, once you set the setting to Landscape, everything printed afterwards using your ActiveX container will also print in Landscape.
    Something else which may not apply to you (but maybe--I'll at least mention it) is printing a landscape single image... that's usually why I needed to print landscape... to print out a full page screenshot of a graph or something. I do this in portrait mode by just attaching the control image but rotating it first and adding the HTML code to make it 100% of the vertical page.
    Last but not least, if you are 100% set on using a programmatic implementation to print a landscaped report (no user interaction), the best thing to do would be to build on an ActiveX implementation so that your report is being loaded and printed from an embedded IWebBrowser2 object. With the IWebBrowser2 object there is an option for using a pre-defined print template. This option is NOT for the faint of heart and requires you basically to re-program the whole IE print-preview functionality. However, it's not impossible either, it just takes the time of learning basically how the IE print preview interface works and then adapting it to your application (in this case, landscaped printouts). This is also the ONLY way to change HTML report headers and footers. The print preview interface in IE is written entirely in javascript--you can get details on msdn (search for "print preview templates"). However, there isn't really enough info there to do things with any ease. So....
    If you get to the point where you get an ActiveX container working and want to fool with the IE print preview javascript templates, let me know. I have extracted the entire template and associated images from the windows DLL it is stored in so I could adapt it and change the headers and footers for my reports and things of that nature.
    Now that I mention it, I believe that is the only way also to actually set landscape or portrait--by programmatically changing the printing margins (so it prints 11x8.5 instead of vice versa).
    Anyway, hope that helps...

  • FICO configuration for warehouse management

    Hai ...
    My company planning to use warehouse management.
    Anyone can help me, what will be needed as the FICO configurations regarding warehouse management.
    Please inform me where can I get the articles or any documents.
    or just email me at [email protected]
    Thanks,
    Melissa

    hi
    see the below link for compleate config sof warehouse management
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEWM/MMWM.pdf
    nagesh

  • Print Preview for Query Manager

    Hi all
    When I open up query manager and run a report query it opens up the correct information however when I click on print preview it brings up a window which says print preferences and has a selection of window, table, or selection area.  I want the selection to be table permanently.
    What I want to know is what do I need to do to skip past that window and take me directly to print preview in the table format?

    There is no option available to skip the print preferences window or to make the selection to be permanent.
    As an alternate, Export the result to Excel and print from there or
    Create a Query Print Layout for the Query by clicking 'Create Report' button in the 'Query Manager' window, and print the Query Print Layout by selecting  Tools -> Queries -> Query Print Layout

  • User Exit for warehouse management - transfer order sorting

    Hi,
    I want to sort transfer order of warehouse management by user exit, which user exit I can use?
    Kindly please advise.
    Regards

    Hi,
    I worked on the same object.
    For sorting you have to place a button in the standard transaction,
    I found some screen exits but they are not working.
    Finally I developed the total customized transaction for that standard LM45.
    If you have any doubts let me know.

Maybe you are looking for