Printer setup when SMARTFORM is printing

Hello guys.
I have a problem with smartform printing, when I make it, there is screen with printing input parameters like OutputDevice, Copies, Page selection, Print immediatelly etc. All of this parameters are stored in SSFCOMPOP structure, but there is no information about Frontend printer...
Frontend printer option I can confugure by RSPO_FRONTEND_PRINTERS_FOR_DEV fm, but there is a problem, how can I "send" it to smartform?
Thanks in advance.
Daniel

Any network printer can be defined as a SAPprinter and choose as output device.
And I know examples of output mailed as PDF:s instead of printed.
Sorry, but I don't know any way to choose LOCL printer in SAP as output device and then decide which PC printer I want to use.
Regards
Åsa Thenstedt

Similar Messages

E-Mail print error; check SmartForm or printer definition

Hi Team,
We are facing an issue when we try to print the email in SAP CRM 7.0. Getting an error saying -Mail print error; check SmartForm or printer definition.
Any pointers on this how this can b resolved will be of great help.
Have gone through the similar sdn thread, not able to really understand how the issue was resolved.
Error when printing an email > CRM_IC_APPL_UI_CHMSG
Regards,
Udaya

Hi Udaya,
Try to maintain a default printer for a particular user in t-code SU01 (on Defaults tab -> Output Device).
Then, when you print again it will generate a spool order for chosen printer (can check on t-code SP01).
Kind regards,
Garcia

Printer setup utility not recognizing printer

I have a G5 powermac with os 10.3.9. I have a HP 5000n printer with an ethernet connection over a LAN. The printer was working fine however It stopped working today. I tried reinstalling the HP drivers but the printer does not come up in the printer setup utility list. So I deleted all old references and tried again but still not showing. As I remenber this original setup was really easy but I can't get it to work now? Any help greatly appreciated

Printer troubleshooting checklist:
1. Check that the printer operates by doing a self-test print using the buttons on the printer itself.
2. Check that the cable is fine. Perhaps swap the cable if another is available.
3. Repair Permissions using Disk Utility, found in Application/Utilities.
4. With Printer Setup Utility closed
Locate the com.apple.print.PrintCenter.plist
found in ~/Library/Preferences and trash it.
5. Switch off, disconnect and unplug the cable of the printer.
Locate the com.apple.print.HP5000n.plist or similar name
found in ~/Library/Preferences and trash it.
Reconnect the printer, switch on.
Open Printer Setup Utility, select add printer.

I am trying to print from iphoto to my printer. When I click print on under File tab it says that a theme cannot be found and that a theme needs to be intalled? Why is this window popping up and how I install a "theme" on iphoto?

I am trying to print from iphoto to my printer. When I click print on under File tab it says that a theme cannot be found and that a theme needs to be intalled? Why is this window popping up and how I install a "theme" on iphoto?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Problem with Printer Utility Setup when installing Epson printer

Hi everyone,
Hope some kind soul here can help me out on this.
I bought a Epson Stylus CX7300 All-in-one printer yesterday and am having difficulty installing the printer driver onto my eMac running on OSX 10.3.9.
I followed the procedure on the Epson installation disc and even called up their customer support office and went through step-by-step guides to troublesome the cause. Even downloaded the latest driver from the Epson site, and installed it, but every time I open up a document and tries to print, the following would occur:
1. When I click "PRINT", a pop-up will appear, and under the printer field, it will be indicated as "NO PRINTER SELECTED"
2. I would then select "EDIT PRINTER LIST" from the printer field - after which another pop-up will appear saying "You have no printers available. Would you like to add your list of printers now?"
3. When I click "ADD", an error pop-up will appear saying "The application Printer Setup Utility has unexpectedly quit. The system and other applications have not been affected. Would you like to submit a bug report to Apple?"
I have submitted tonnes of "bug reports" to Apple since yesterday but nothing happened.
I also tried to open Printer Utility Setup directly from under System/Applications/Utilities, but the same error will appear and it will just quit "unexpectedly".
Is there any remedy to this?
Oh, the strange thing is, the CX7300 can scan images fine, and I also managed to do a test print from Epson's utility.
Thank you.
Yours Sincerely,
Alvinology

Hi, I was just about to post the same question myself. I'm trying to sort out a friends iMac G5 with a Canon Pixma(?) printer. In this case the printer used to work OK, but after moving house and setting it up again, Print Utility crashes every time when trying to add the printer.
Thanks
Paul Nilsson

Printer setup when print program is called through a BAPI from a VB program

Hi All!
I have a BAPI being called by a VB program. The BAPI prints successfully when executed using the SAP GUI but fails to print when called via the VB program.
Is there any special printer setup needed for this?
Thanks!

Excellent Search Server seems to be a virus; it may be that searchpredict is one, as well.
You should run anti-malware programs such as BitDefender and Spybot SD, along with fully scanning your computer, in order to eradicate the issue.
Otherwise, simply uninstall and reinstall Firefox. You can save your bookmarks and import them once it is reinstalled. Simply research "how to save bookmarks in Firefox."

Message of "printer offline" when trying to print

Hello,
I have iphone 4s and a HP wireless printer a little less than 3 years old. When trying to print something from my iphone, it keeps giving me the message "printer offline" with choices for continue or cancel. I hit continue, but same message comes up a minute or two later. This happens even when my printer is awake and wirelss signal is strong. My phone finds the printer when i try to print, but keep getting this printer offline message. Any help would be appreciated.

Is your particular printer model AirPrint compatible? Here's the list, as well as guidnance for setup and use:
http://support.apple.com/kb/HT4356
If your HP printer is not one of those on the HP list, then you wiould need some othe app to print from your iPhone. Search the App Store.

Printing dark when using shared printer

I am having problems getting Lightroom 2 to print correctly when printing to a shared Epson 4000.
When printing to the 4000 as a local printer everything works as it should. But when I try to print to the same printer, with the same settings as a shared printer in a small network the prints turn out too dark and with colour casts.
Using epson profiles and pointing lightroom to the correct profile. Setting printer driver correctly (when i print the from photoshop CS2 it prints correctly, even when using a shared printer).
Epson 4000 using the latest 3.09 driver. OSX 10.4.10 on imac G5.
Any help appriciated, strange that everything works great on a local printer but not on the same printer when shared over the network (printersharing in OSX)
Am certain I have profile selection and printer driver settings correct ( after all it works from photoshop and locally).

Dear Larry,
Thanks for reporting the problem. You mentioned that page content is getting shifted by around 3/8 inches when printed using Mac Airprint using Acrobat which resulted in clipping of some of the content and other applications print fine.
Could you please pass on the same pdf to me as well? Although, it doesnot look dependent on any particular pdf but I would like to analyze certain behavior with the pdf you are using.
Please also confirm that you have not printed with "None" pagescaling option when you observed this.
Thansk,
Atul

Missing print driver when adding rendezvous printer

Hello all, hopefully you smart people can help me.
The new iMac (10.4.9) is glorious and printing on the new HP Photosmart D5069 via USB, no problems. I want to share the printer with two laptops (an iBook and Powerbook, both running 10.3.9). I enabled sharing.
When I go to add the printer on the laptops, under Rendezvous printing it sees the printer at the iMac (@ computer). I add it, but then I need the print driver.
So I stepped back and installed the HP software disc on the laptops to get the print driver on there. I installed it via USB. I can print from a laptop to the printer via USB.
However, when I return the printer to its USB connection on the iMac, and then proceed to add the shared printer via Rendezvous on the laptops, I still can't find the printer driver. Under Printer Model/HP there is no Photosmart D5xxx model. Using the generic print driver leads to no printing via Rendezvous (it shows up in the queue on the iMac, but no printing occurs).
So how do I add the correct print driver? It must be on my hard drive, since I can USB print, but I can't reveal its presence to Rendezvous.
As an added note, I thought Rendezvous was supposed to make it EASY. If you have to add the print driver manually, I'm not sure how that helps using Rendezvous.
Thanks
Kevin
iBook G4 12" 1.2GHz Mac OS X (10.3.9)

Repair permissions (Disk Utility) after any HP driver install. Then restart the computer and try Adding the printer.
For troubleshooting, try using the HP Photosmart P1100 Gimp-Print driver included in OS X. If you don't see that either, you may need to update your laptops with Gutenprint, the new name for Gimp-Print drivers:
http://gimp-print.sourceforge.net/MacOSX.php3
As far as we can tell, no Apple employee reads these user-to-user discussions (except the admins).

Finding it difficult to instal my hp cmf2320nf MFP printer and when i open printer preferences it gives me a

I am finding it to install my Hp printer cmf2320nf MFP. when I open printer and scanners from system preferences, it replies "There was an error in Printers & Scanners preference pane."

Embie wrote:
I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware. Great. I will replace my faulty hardware manufacturer. Simple, HP never again.
In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you. Please read this post then provide some details in a new thread. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? What is the problem you are having (with the printer...)?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Google Cloud Print setup - Unable to parse printer capabilities

I'm trying to add my CP1525nw to Google Cloud Print as a Cloud printer, and not as a LOCAL printer, however each time I add my eprint email I get the following message; "Unable to parse printer capabilities" - I've attempted both private and public use for eprint settings with no such luck.
Any help would be greatly appreciated. I've tried reseting the email with no luck...
EDIT - 04/01/11:
I chatted with HP support and although the representative was extremely curteous, they could not help me. The support agent assured me the issue would be taken to the next level and looked at so hopefully we can have a resolution here shortly.
EDIT - 04/04/11:
Received a response from the original HP rep I chatted with online. In summary, he/she was not able to find a solution and states the issue will be sent up to HP's highest level of technical support.... We shall see.
EDIT - 05/25/11:
After 2 months of waiting, HP has fixed the issue. Remember to update to the latest firmware and check all settings before proceeding.
This question was solved.
View Solution.

well, when I use google chrome to set up cloud print, it does add my HP1525nw to my google cloud print, but ONLY THE LOCAL printer. In other words, google cloud print can add both local printers and cloud enabled printers. It does add the local printers, and since while on my home network, the HP laser is a local printer, it grabs that. But it still won't allow me to add it as a cloud printer.
The problem with being connected as a local printer is that my notebook has to be on and it has to be on my local network in order for me to print to the printer through the cloud (like using my ipod).
The point of the HP printer being added as a direct cloud printer is so it can be printed to as a stand alone printer, even if my local computer is not on, because it is connected to my router wirelessly and not dependent on any local computer.
and that is where it is failing. Trying to add the printer as a CLOUD printer does not work (the same problem everyone else here is having)

SAP Printer setup for Color Laser printer

Hi,
Currently i have just setup a printer in SAP successfully.
But as this printer is a color laser printer, the printouts are in colors.
Is there any settings which i can set it to monochrome?
Thanks

Chong,
Could you check this?
Run SPAD transaction. Enter your Output device name(Printer name) and hit enter.
Under the 'Output Attributes' tab , see if the checkbox 'Color printer' is checked.
If checked, uncheck it and try printing.
Regards
Sabu.

Cannot print from the web although everything else prints ok - when asked to print I get one blank page then nothing

I cannot print from the Web all else prints OK the printer throws out a plain sheet of paper and the print preview is blank
== This happened ==
Every time Firefox opened
== about six weeks

Try This!
1) Go to Print Preview
2) Print
3) Name: HP PSC 2100 series (depend on your printer)
4) Properties...
5) Paper size: letter
6) Change to Paper size: A6
7) OK
8) Repeat step 4 again
9) Change back again Paper size: letter
10) OK
11) Don't print, but go back to Print Preview again and see if it works
This is the one that have work for me after trying several times modifying about:config with no success. Good luck and hope that will help.

My iPad can detect my wireless printer, but when I select 'Print', the message 'The printer is offline' appears.

I am able to print to the printer with other devices no problem (my laptop, etc.). It originally did work for about 2 months, then suddenly stopped. I have the same problem with my iPhone. We have since changed our wifi hub, but the same problem has persisted.
It seems strange to me, that when it searches for a printer, it can find the 'Canon MG5350 Series' but then says it is offline when it begins to print.
Any help would be greatly appreciated, as this has been driving us nuts!!

If you have change your Wi-Fi hub (router) you must run the CD provided again to put iPad and printer on the same network.
The CD will put new SSID and Wi-Fi password into printer.

Print Signature when Document is Printed

Hi Friends
When a Document is approved ,I want the Signature ( As you sign on Paper ) of the person with date and time and Approved to be printed when a user takes print out of the Original File attached to DIR.
How this can be achived.
With Regards
Mangesh Pande

In ECL Viewer or EAI viewer when you open the document - PDF only /Tiff file's, choose Redlining option.
It will ask for the layer Name .
give as "user name" and choose option "STAMP"
Enter your name and automatically the layer 1 will get saved with date and time.
Now save the DIR.
Based on layer you can get the Print option with wich the comments wil ge derived as a Print.
Regards
Fapreeth

Printer setup when SMARTFORM is printing

Similar Messages

Maybe you are looking for