Printer shared from my Mac is not seen from a PC using Bonjour for Windows

I am going nuts here, hope someone can help.
I have a Canon multi-function printer (MP830) attached via USB to a Mac G4 (with Mac OS X Tiger). At one time, I had it set so a Windows 2000 PC could print to it but deinstalled it after some printing issues, and have been unable to get to working again. The machines are connected together via a Netgear router. As far as I know, everything is the same as it was before, yet I cannot get it to work as it did.
- The printer works fine from the Mac.
- If I connect the printer to the PC, it works fine.
- On the PC, using Bonjour for Windows, I cannot see the printer attached to the Mac but I can see, and print to, an Epson printer that is attached to a different Mac.
- And from the second Mac, I am able to see -- but not successfully print to -- the Canon printer. The print job stays in the queue of the second Mac and says "Unable to connect to SAMBA host, will retry... Error: Connection failed with error."
- I have tried:
-- de-installing and re-installing Bonjour for Windows and the Canon print drivers on the PC
-- and have de-installed and re-installed the Canon drivers on the Mac
-- I have removed and re-added the Canon printer on the Mac. Printer Sharing is on, and this printer is checked in the Sharing box.
Any suggestions?
G4 Quicksilver and Dell PC with Windows 2000 Mac OS X (10.4.9) Canon MP830

Thank you. Those are beautifully written procedures.
Looks like it's a network issue. I reach the step, "Adding a printer using the wizard":
You must enter the following URL, you must use the Queue Name you noted down earlier
http://<IP address of Mac>:631/printers/Queue Name
which I do, entering
http://192.168.0.4:631/printers/MP830
and I get the following error:
"Could not connect to the printer. You either entered a printer name that was incorrect or the specified printer is no longer connected to the server."
And then I am toast!
Using the other procedure, I simply don't see the Mac's printers in the Bonjour Wizard's "Browse for Bonjour Printers" window.
Not sure where to go from here -- any ideas?
The Mac's IP (set via DHCP) is 192.168.0.4, subnet mask 255.255.255.0. The PC is 192.168.0.5, I can't find the subnet mask.
Pretty sure it's a network config issue, especially isnce I can Bonjour to my other Mac.
TIA...

Similar Messages

Printer Sharing from a PC to Mac

I have a PC set up with a printer and would like to share it over Ethernet LAN to a PowerMac G4 and iBook G4, I've tried setting the PC side of things to share the printer but the Mac can't find it.
The PC is also sharing it's Internet connection over the LAN.

I don't think I've gotten Printer Sharing AND Internet Sharing to work together, but haven
t tried in a year or so...
Might go to Apple>Downloads and try Bonjour For Windows... pretty good at advertising services available... as well as opening the proper Ports for things.

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section
I used Colormunkie Photo to create an .ICM file for printer calibration. When that failed I tried changing the suffix to .ICC. Under neither circumstance did LR4.2 display the file in the menu to select printer profile. There were several display files with both suffixes but no printer files at all. I tried three times with no success and cannot think of what else to try. The first two were the same. I varied the file creation name suffix in the third. Help will be appreciated. My OS is Win 7 ultimate SP1 Printer is HP 2550L laserjet.

Tillman
Glad you found your answer, Colormunki is smart enough to figure out the color space for the printer as I found out - But for quality work the latest generation of inkjet printers from Epson and Canon are hard to beat, and compared to a laserjet the quality is like night and day. The other benefit of changing up to an inkjet printer is the choice of papers available which you could not put through a laserjet.
I had a colleague that tried printing on Photoglossy paper through his color laser and it fried the fuser, and HP, while they replaced the fuser unit under warranty, made it very clear that that was a daft thing to do.
So if I were in your position I would go with an inkjet and you will then enjoy the benefits of better quality output, better paper choices and with your Colormunki be able to make custom profiles that will work in LR
Cheers
Mike

In OS 10.6.8 how do I turn on printer sharing from terminal?

I have a Mac Pro and I need to share a printer, however every time I go to sharing and try to select printer sharing preferences crashes. Is there a way to turn on printer sharing from termina?

In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Utilities/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

I answered my own question: There's a difference between "download' and "install." Hunt for "install" (1.5 hrs in my case) and line up your passwords, Adobe ID, etc, then install. Took 15 min. The right choice shows up in Applications. Now it's on to figuring out why photo selected for edit in iPhoto does not show up on screen in Elements.

Can I upgrade from Adobe Acrobat 9 Pro for Windows to Adobe Acrobat IX Pro for Mac?

Hello,
I have a question concerning Upgrades:
Can I upgrade from Adobe Acrobat 9 Pro for Windows to Adobe Acrobat IX Pro for Mac?

Hi Christian ,
I am not sure if you are eligible to upgrade from Adobe Acrobat 9 Pro for Windows to Adobe Acrobat IX Pro for Mac as this is an older version of Acrobat.
Refer this link to connect with the chat support team ,they will assist you further with the same.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Regards
Sukrit Dhingra

I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?

I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?

Welcome to Apple Support Communities
You have an Early 2008 Mac Pro. You have the specs that your Mac Pro needs for more memory > https://support.apple.com/kb/HT4433#4 As you can read, that computer should have come with 2 GB of memory.
You can buy memory at OWC or Crucial > http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#800-memory Those sell compatible memory with all Macs. You can use another memory, but you can be sure that the memory that these brands sell are compatible

Bonjour for windows: "The printer you have selected is no longer available"

Whenever I go to try and set up sharing my imacs printer with wifes windows computer, the bonjour for windows app at first sees my two printers, but as I select them I then get a message stating that "the bonjour printer you have selected is no longer available. Please make sure the printer is powered on and plugged in." It of course is on, powered and plugged in, and receives print jobs from my mac. I have also configured printer sharing in OS X 10.6 to allow for "everyone" to print. Don't get any firewall messages either.
Same problem happens for me when I am trying to connect from windows running under Parallels on my ibook.
Has anyone run across this problem and can offer guidance? I'm running out of hair to pull out!
Thanks in advance,
"I'm a Mac, and I'm a PC... and we're trying to play nicely together." (mumble-mumble-grumble...)

Problem solved!! Somehow. After being in try everything and anything mode (remove/add printer, update drivers (again), shut down/restart, etc), I think I solved the problem my changing sharing permissions. I still couldn't print though. Kept getting the "printer cannot be contacted over the network" error message. After much searching and reading things I didn't really understand, I noticed I kept running across this statement that Windows 7 does not play well with DHCP and the printer should be assigned a static IP address. I found this forum item that tells simply how to do that: http://discussions.apple.com/thread.jspa?threadID=1725525. The big thing was that it had me add the printer as a local printer where I had been trying to add it as a network printer. I never would have thought to do that. Then you put in the Airport address and that's it. It worked!
This whole thing made it very clear why I moved from Windows to Mac. I should never have had to spend a whole day trying to get a network printer to print. Good luck to everyone having this issue.

Bonjour For Windows not finding printers

Hi I don't know if I'm using Bonjour right so I thought I'd ask the experts (you guys!)
I have three printers connected to a desktop running Windows Vista.
I just got a Macbook Pro and would like to wirelessly print from my Macbook to the printers connected to Vista.
The guy at the Apple store said Bonjour For Windows would help me do this but when I go into the wizard, it says there are no Bonjour printers.
How do I make my three printers "Bonjour printers" so I can print to them from my Macbook?
Thanks!

I think you would have to have the printers hung from the USB port (or several ports with a powered hub) hanging off a Time Capsule, or the Airport Express routers. Then, they can be shared between PC and Mac.
You say the printers are connected via USB to the Win box? Can you set up printer sharing on the Win side and then maybe they will be seen by Bonjour. (But you will have to leave your PC on to print to them)
Or, if any of them have network interfaces, connect them to a switch and print from Mac and PC via your local network.
Jeff

Bonjour for windows gives this error - You do not have sufficient access...

I installed Bonjour for windows on a PC running XP. When I run the Bonjour app from windows I can see the printer I wish to connect to. It is shared off of my G3 server. When I try to connect I get the following error,
"You do not have sufficient access to your computer to connect to the selected printer"
I have done some research through Apple's info database and found,
http://docs.info.apple.com/article.html?artnum=302408
I followed the instructions and still I get the same error. I have rebooted the PC deleted all the printers under the printer window. But no luck. I found a similar request by another apple forum user. His issue was the same but he was using 'Parallels' emulator. But no solution was provided.
Any suggestions?

Well this is what I've done to date to try to resolve this issue.
I uninstalled Bonjour for Windows from my PC. I checked Apples support pages dealing with Bonjour for Windows (BfW). As suggested I deleted all printers in my printer window, (to delete all possible print Queues). I updated my Windows to the latest patch for XP. I reinstalled BfW, with the XP Firewall turned on. It is suggested that BfW will make the necessary changes to the XP firewall to allow traffic going through port 5353. I have tried more than one printer off of my G3 and I double checked my external router port restrictions, and I turned off the firewall on my G3, shared mt printers in OS X, and even turned on windows file sharing. I even updated my G3 to 10.4.8
I pinged my G3 from my XP machine it's there. Also I can see the G3 with it's printers when I browse the network from the XP box. Also I'm on the same local subnet 192.168.2.x
The only thing I have not done yet is see if it is possible to ping a bonjour host (my G3) from a bonjour client (XP box). That would at least verifiy the 5353ports.
Anyone have a bonjour utility to do that? Probably have to run in a Windows enviroment. Or can a ping packet be directed to use a particular port?

Bonjour for Windows in Parallels stops printing in OSX

Since I installed Parallels a few weeks ago I had no need to print from Windows. Yesterday I had need so I installed the Apple Bonjour for Windows and the necessary print driver (Brother HL-1430) and was able to print from within Windows.
The issue I have is that I can no longer print from OS-X. In fact every time I try and print from whatever program the program quits unexpectedly. The same happens if I try using Page Setup.
I have tried all the solution offered on Apple's support web site but to no avail. Reinstalled drivers the lot. The printer shows up in About this Mac.
My printer is connected wirelessly via an Airport Express. This works fine for Parallels with Windows XP and for our two other Macs. It just does not work with my iMac in OSX and this is only since I installed Bonjour for Windows on this machine.
Can anyone help with a solution?
PowerBook G4 Mac OS X (10.3.7)
PowerBook G4 Mac OS X (10.3.7)

Pahu,
I already have an Epson Photo 900 attached via USB, besides the wireless Brother. As the print dialogue window is not appearing I don't get the chance to select either.
I have tried you suggestion and deleted drivers, reset printing etc. and regrettably no change. Here is the first 10 or so lines from the crash report when printing from Firefox;
Date/Time: 2007-04-06 17:56:12.302 +0100
OS Version: 10.4.9 (Build 8P2137)
Report Version: 4
Command: firefox-bin
Path: /Applications/Firefox.app/Contents/MacOS/firefox-bin
Parent: WindowServer [56]
Version: 2.0.0.3 (2.0.0.3)
PID: 255
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000020
Thread 0 Crashed:
0 com.apple.CoreFoundation 0x90849cc3 CFBundleGetFunctionPointerForName + 14
1 ...apple.print.framework.Print 0x92cc5b7a PJCPageSetupDialog + 72
2 ...apple.print.framework.Print 0x92cc7279 PMSessionPageSetupDialog + 169
3 org.mozilla.firefox 0x00211f86 nsPrintingPromptService::ShowPageSetup(nsIDOMWindow*, nsIPrintSettings*, nsIObserver*) + 162
4 libxpcom_core.dylib 0x0185d981 XPTC_InvokeByIndex + 81
5 org.mozilla.firefox 0x0038f07b XPCWrappedNative::CallMethod(XPCCallContext&, XPCWrappedNative::CallMode) + 743
6 org.mozilla.firefox 0x00381313 XPCWNCallMethod(JSContext*, JSObject*, unsigned, long*, long*) + 261
7 libmozjs.dylib 0x00f2bcfb js_Invoke + 848
8 libmozjs.dylib 0x00f1e4c7 js_Interpret + 4705
9 libmozjs.dylib 0x00f2c253 js_Invoke + 2216
10 libmozjs.dylib 0x00f2c8f0 js_InternalInvoke + 146
11 libmozjs.dylib 0x00ef1a5d JS_CallFunctionValue + 62
12 org.mozilla.firefox 0x00526e62 nsJSContext::CallEventHandler(JSObject*, JSObject*, unsigned, long*, long*) + 430
13 org.mozilla.firefox 0x005090a4 nsJSEventListener::HandleEvent(nsIDOMEvent*) + 814
14 org.mozilla.firefox 0x00196804 nsEventListenerManager::HandleEventSubType(nsListenerStruct*, nsIDOMEventListener*, nsIDOMEvent*, nsIDOMEventTarget*, unsigned, unsigned) + 186
15 org.mozilla.firefox 0x001979a0 nsEventListenerManager::HandleEvent(nsPresContext*, nsEvent*,

OSX Printing Problems after Installing Bonjour for Windows in Parallels

Since I installed Parallels a few weeks ago I had no need to print from Windows. Yesterday I had need so I installed the Apple Bonjour for Windows and the necessary print driver (Brother HL-1430) and was able to print.
The issue I have is that I can no longer print from OS-X. In fact every time I try and print from whatever program the program quits unexpectedly. I have tried all the solution offered on Apple's support web site but to no avail. My printer is connected wirelessly via an Airport Express. This works fine for Parallels with Windows XP and for our two other Macs. It just does not work with my iMac and this is only since I installed Bonjour for Windows on this machine.
Can anyone help with a solution?
iMac, Powerbook G4, iBook Mac OS X (10.4.9)
PowerBook G4 Mac OS X (10.3.7)

Since I installed Parallels a few weeks ago I had no need to print from Windows. Yesterday I had need so I installed the Apple Bonjour for Windows and the necessary print driver (Brother HL-1430) and was able to print.
The issue I have is that I can no longer print from OS-X. In fact every time I try and print from whatever program the program quits unexpectedly. I have tried all the solution offered on Apple's support web site but to no avail. My printer is connected wirelessly via an Airport Express. This works fine for Parallels with Windows XP and for our two other Macs. It just does not work with my iMac and this is only since I installed Bonjour for Windows on this machine.
Can anyone help with a solution?
iMac, Powerbook G4, iBook Mac OS X (10.4.9)
PowerBook G4 Mac OS X (10.3.7)

Using Lightroom for Windows 8.1 with Epson Stylus Photo R3000 printer.

Using Lightroom for Windows 8.1 with Epson Stylus Photo R3000 printer. From PRINT section, if I click either "Page Setup" or "Printer" I get the Epson printer dialog box, drill down, change settings- so far so good. When I'm finished with the settings and close the dialog box (hit OK) the print job starts immediately; I never get a chance to hit the Lightroom "Print" button. Question: does this bypass any Lightroom processing or control of the print job?

Even if I just click the Printer button to verify my settings I should then return to Lightroom, and then click Print to start the job. This does not happen, the job starts as soon as I close the properties dialog box. Again, is any Lightroom processing or control being bypassed because of this?

You can take a coldbackup from solaris and use it on windows NT?

hi all,
You can take a coldbackup from solaris and use it on windows NT?
can we?
regards
girish

khaja(DBA) wrote:
Yes!!! why not
Have you actually done this?
Why not? Because the internal structure of the solaris files is different from Windows.
>
>
Regards,
khaja

Printer shared from my Mac is not seen from a PC using Bonjour for Windows

Similar Messages

Maybe you are looking for