Printer sharing doesn'w after upgrading to OS 10.5.8

I updated my Intel dual core 2.16 iMac to OS 10.5.8. This computer runs a local wireless network and shares it's internet (coming from the ethernet connection to LAN) and its printers (one USB and one over the LAN) to other macs using the airport. It worked perfectly before the upgrade...now the other macs on the wireless network can't use the shared printers. They can still use the internet. The iMac can still print directly ....any suggestions?

Also check the firewall settings on the iMac (System Preferences > Security > Firewall). If this is set to 'Allow only essential services' it will block your printer share.
One thing I noticed with the 10.5.8 update is that it removed my local connected (USB) printer queues, which also occurred after the 10.5.7 update. The LAN printer queues were untouched. Once the USB printer was reconnected, the printer queue appeared again in the printer list, with the sharing checked, however the share did not work. After disabling the share and re-enabling, the printing was working again.
If you open the printer queue on the iMac, do you see the incoming print job in the queue? Wondering if the job is getting to the iMac or not leaving the client.
Pahu

Similar Messages

Cannot print a PDF file after upgrading to Windows 8.1

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

PDF's won't print in Internet Explorer after upgrading to Adobe Reader 11.0.03

PDF's won't print in Internet Explorer 9 after upgrading to Adobe Reader 11.0.03.
The print dialogue box won't open....nothing happens.
Desktop OS is Windows 7 SP1.
Randy Heil

Two obvious troubleshooting techniques are to delete and re-install the printer driver (or updating printer driver) and fixing the installation of Acrobat. Have you given those a try?

Print problem in epiphany after upgrade

I am having printing problems in epiphany after I did my upgrade. It says epiphany book marks crashed, and it is collecting information to report the bug. But then it closes everything. Some pages work fine, but others do not. Also, I can't choose to print a selection any more.
is there any way to go back to the old epiphany, or get this one working right?
Thanks

HI,
While in an Upgrade version the drawback of BDC is the screen names,
number and sequence may change in the upgraded version as compared
to the previous version.
In ECC6.0 you again have to do the recording for the required transaction
from T Code SHDB and then upload the data.
Hope it helps,
Regards
Mansi

IMac 10.8 Internet sharing stopped working after upgrade from 10.7

My iMac 27 (10.7) with Internet Sharing enabled has been working perfectly since last year. After upgrading to 10.8, I noticed the up arrow flashes and goes to regular WiFi mode. Stopping/starting the service causes the up arrow to flash again and immediately default to WiFi. I removed Ethernet and WiFi options from Network settings and re-installed which solved the Internet sharing from flashing and defaulting to WiFi mode. However, connecting to the Internet sharing from other devices (iphone/ipad) does not work and will not connect to the internet. On the iMac, I'm able to browse the Internet without issues.
If I disconnect the Ethernet cable and plug into either my MacBook or MacBook Pro and enable Internet sharing, everything works perfectly and all my other devices can use the Internet.
Now sure how to further troubleshoot and resolve this issue. Any advice would be greatly appreciated. I should add that the iMac is running Mac OS X Server which was also upgraded to 10.8. I was looking inside the Server for security options that restricted internet access via Internet sharing. Nothing.
Thank you!
David

Thanks for your answer.
Unfortunately this isn't a solution for my problem. As I understood, you showed me that your IP addresses had changed after enabling/disabling internet sharing. I checked my IP addresses after enabling/disabling internet sharing by using "ifconfig" but they are the same as set manually before.
My other strange observation regarding the ping command has gone now. After switching on internet sharing I had to disconnect the ethernet cable and plug it in again. Then the ping between both computers is working (but still not internet sharing).
Anyway ... thanks for your help!

Return to Original - Doesn work after upgrade

Strangely after upgrading iPhoto, in Edit mode, "Enhance" button does not seem to have any effect. Plus, after edit if we click "Return to Original" the image is damaged forever in iPhoto... kind of blurred image. It was working fine before the Mavericks upgrade. Also it was a new set of photos.. not from the old iPhoto library.

Can't reproduce that here.
What does
if we click "Return to Original" the image is damaged forever
mean?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

Shared HP 6L printer no longer works after upgrade to Mavericks

Prior to upgrade was able to share old HP Laserjet 6L with another Mac....believe driver was Gutenprint 5.3xx.... Have not been able to find new driver to make printer work...Any sugestions on how to resolve issue...short of buying a new printer...althought it is probably time. Thanks

I tried several times to delete and add printer.Gutentenprint not an option to select defaults to Generic Postscrit Printer.
When I deleted and re-added my HP (which is connected by ethernet), where the default "Use: Generic Postscript" showed up, "Select Software" is an option in the pull-down menu. That gives all the Gutenprint choices.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Kodak printer will not work after upgrading to Yosemite.. Please Help

I have uninstalled and re installed my kodak 5250 more than once and it still does not work. I have carried out a clean install of my Yosemite OS and still no joy. How do i fix this?

I've got the 7250 as well -- same exact issue. I sent an e-mail to Kodak support on Friday last week -- haven't heard anything, but they did ask for 2 business days time to respond.
I've been running the Yosemite Beta on one of my machines for a few months now and my printer stopped working on that one after the upgrade. I kept Mavericks on my other Mac until this weekend, and printing still worked from that machine until I upgraded to Yosemite over the weekend.
I've got Linux and Windows virtual machines that can print to the ESP 7250, so I can still print, albeit with the hassle of firing up a VM and printing from there... I sure hope Kodak responds! I offered to help them test any beta-quality drivers they may have, so -- we'll see what they say!
I've been planning to ditch the printer and get a new one, but I'd rather not have to do it right this minute just for a driver issue :-/

Can't print to Canon IPF610 after upgrading to Mavericks. HELP!!

Since updateing to the OS 10.9 Mavericks, I am no longer able to print to my Canon IPF610 Large Format Printer. I tried upgrading the driver at the Canon website for the OS 10.9 but it's still not working.

I already know about this and this solved my problem 2 years ago when I hooked up the printer for the first time. Now after installing the Mavericks update, it keeps saying the printer isn't connected. I tried using a different ethernet cable, unplugging and plugging printer back in and still the same problem. I can still print to it from my old Apple G5 tower using 10.5.8 and was even able to print with no problems on my Intel iMac using the 10.8. I installed the updated driver for 10.9 on Canon's website and still get the same problem.

Why wont my HP All In One C5280 printer print from photo tray after upgrade- vista to windows 7?

I recently downloaded an upgrade for windows home premium. Used to have Vista. Now my HP C5280 All In One printer will not print from the photo tray when settings are correctly set. This is after I ran HP Update. What do I do next.

I would try running the HP Print Diagnostic Utility. Go to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&...= and see what part fails.
The PDU checks the connectivity, spooler condition, online status, device manager, print queue, ports, driver, conflicts, and default printer.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Lost "Shared" in Finder after upgrade of 10.5.2

I have 2 Window computers that are networked as well as my MacBook Pro.
Prior to my 10.5.2 upgrade I could see and access those other machines and their files.
Since the upgrade the "shared" folder does not display in the Finder sidebar.
I have checked Finder preferences and all the appropriate boxes are checked.
Any suggestions out there?
Also, after doing a Archive and Install, is it OK to delete the "Previous System" folders that are created?
Thanks in Advance

Hi, I found Terminal commands within this section of the forum, on page 3 or 4. I don't give them out because I am not familiar, nor comfortable working this deep in the system. You can reset Finder, New Finder window, and try commands.
Ray

Cannot print from ANY application after upgrade to 10.4.8 !!!

Hi all,
as it is written in the subject.
Up to yesterday, I had OS 10.3.9, everything ok, could print from any application.
Then I moved to Tiger and to the last version (10.4.8).
And today the "nice" surprise: either from Preview, Texshop, Word, any web browser... I cannot print anymore!! As soon as I go to file/print, the application crashes, any suggestions??
Thanks a lot

Hmmm. It sounds like a possible problem with the system prior to updating. If you've done this already don't be upset by the suggestion. I'm just trying to cover the bases.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.5.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
Download the standalone 10.4.8 Combo Updater (be sure to get the correct version - Intel or PPC - for your Macs. Reinstall the update using the Combo Updater.
As an added precaution I would recommend you first boot into safe mode before doing the above.
There is a shareware utility called Printer Setup Repair (www.macupdate.com) that you can also try. It is sometimes very useful for fixing problems with the printing system.

HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
I have tried all the solutions provided on the HP website but none of them worked.
I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
If some genius can help me I will pray for him/her that all his/her wishes come true.
Thanks you in advance.
Imroz Baig

I just got my HP Deskjet F2120 working in Windows 7. Here's how:
Insert the setup disk in your CD/DVD drive. Choose to view the files in Explorer. Scroll down to the file "Setup," which is identified as an application.
Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
ALSO check "Run this program as administrator" at the bottom of the window.
Press "Apply," then "OK."
Now you can double-click the "Setup" file and run the software installer.
It will 100% work inshallah...

Printer no longer works after upgrading to Maverick

I have an Epson TX810FW, multifunction printer/scanner. It wwas working fine until I updated to Mavericks. I now get a message that the scanner function is not supported and I cannot get the printer to work. I need both working, and I have loaded all the latest updates from Epson up to 2.15.1.
Can someone provide an answer that will restore the mrinter to fully operational? Otherwise, how can I reomve Mavericks, as the loss of functionality is more of a downside than any enhancements that Mavericks might claim.

Hi,
I've been experiencing a similar issue with my old, yet working until Mavericks update, OKIPage 14ex. No problem at all with both Lion and Mountain Lion but after Mavericks update the printer cannot print any longer. The printer is connected via a regular USB port, the system recognizes it, I can send a print to its queue but as soon as the print is enqueued the printer goes into hold status and nothing can be done to resume the print.
Since the printer model is quiet old, no driver is avaliable from OKI support, however I'm wondering what Apple did with this update thus being able to produce such a mess.
Of course I tested the printer conncted to another PC and it perfectly works!
I would really appreciate some advice in order to restore the previous situation.
Many thanks.
Marco

Printer sharing doesn'w after upgrading to OS 10.5.8

Similar Messages

Maybe you are looking for