Printer Sharing with OS X 10.4.11 not Working
I have an older iMac running 10.4.11. Connected to it via USB is an HP Officejet 6100. I have a second iMac running 10.4.11 and a MacBook running 10.6.2.
Printer Sharing is set up on the first iMac and functioning. The second iMac has no trouble printing to the OfficeJet.
The MacBook running Snow Leopard cannot even see the shared printer when I attempt to add a printer.
Other folks have described similar problems, but I have yet to see an answer. The CUPS fix for 10.5 here: http://support.apple.com/kb/HT2275 does not seem to work at all. I unwisely tried it and was unable to open my print and fax preferences pane until I figured out to undo that modification.
I'd be grateful for any suggestions.
I don't believe I am using Appletalk. I can connect from the MacBook 10.6.2 to both of the iMacs running 10.4.11 via remote login and file sharing. There is, of course, no way to turn on Appletalk in 10.6.2, so no use of Appletalk there. I may have Appletalk active on the iMacs; I will turn it off and see if that helps.
Thanks for the suggestion.
Greg
Similar Messages
-
Iphoto 9.6 is not sharing with Facebook,iMessage,iCloud and is not working for print orders
iphoto 9.6 on yosemite is deleting all of the pics from the former library, iphoto 9.6 can't share with Facebook despite that it is oke with the account. no sharing with iMessage and no sharing with iCloud possible the choices stay grey. also print orders are not possible it's stay also grey.
gombaig wrote:
I had the same issue too, email, facebook, Twitter ect, all greyed out.
What ist the solution?
Did you read the thread?
here is one
I had the same issue, email, iMessage, Facebook,etc.. plus print all greyed out. I went up to the File menu, clicked on the Switch to Library drop down. Since I only have one library it was already selected, hit choose and all of the functions work again. Seems the system wasn't acknowledging my original library once I updated to Yosemite or 9.6. Either way, it works now.
If that does not work here is another suggestion
Try repair permissions with Disk Utility.
LN -
File & folder sharing with privileges on my network does not work. What is wrong?
My Timecapsule is creating a network between my iMac with OS 10.7.5 and my Macbook Pro Retina OS 10.9.2. I am trying to setup a folder on my iMac with controlled access privileges to work as a server for others using the Macbook as a client. I followed different tutorials to the letter, but it did not work, I could not get the connection. Then I called the Apple help line. It turns out that just setting it up with a 'sharing only' account etc. in 'sharing ' in the 'system preferences' is not enough. One also has to set up the same priviliges in the 'get info' window of the folder directly at the same time...so a double setup. They could not explain properly why and there is no mention of this whatsoever in any tutorial I found on the internet. Anyway, I tried that and it still did not work. When I add the user in the 'get info' window and press enter, suddenly the user does not show up in the privilege box with the user name but instead a line saying something like "searching for user" and something small dudeling next to it......I called Apple again. After two agonizing hours on the phone where I was treated like an imbecile it turns out one has to somehow go through the address book ??? Why, I have no clue and how, I do not remember, but suddenly it worked.
Anyway, now two month later I had to add a new user account to my Macbook and I need to give it access to my server folder on my iMac. Well same problem again. I cannot remeber what we did 2 month ago an cannot call Apple, because my service period has expired. I tried myself and got the dudle in the folders 'get info' window again. Then by mistake I deleted myself as the only administrator account on the Imac from the access privileges to that shaered server folder. When I tried to put my account back into the folders privilege settings I got the same message and the dudeling thingy there too. Frustrated I thought it is best to just re-start the computer.......that was the end of it all: Now the startup window does not show my account name and icon anymore, just two lines to fill in the account name and password. The upper line has an arrow pointing left, the lower for the password an arrow pointing right. I filled in the account name and the password....the dudle circle comes and nothing happens, it seems to crash. When I click on the arrows the sign-in lines disappear, only the three buttons for going to sleep, re-start and turn off at the bottom are the only items left on the screen. I tried 10 times to no avail. This is turning into a nightmare!! My account is the only user account on this iMac.......
What am I doing wrong? Or what is wrong with my iMac?
Why is there nothing mentioned about these issues in the tutorials or anywhere else? Why do the tutorials say it is so easy, when even the staff on Apple's helpline cannot figure it out without having lengthy side conferences with their co-workers and managers???
Does anybody know what I have to do again with the address book to add this external 'sharing only' user account to the folder's privilege settings?
I assumme I have to re-boot my computer tomorrow and restore it from the Time Capsule. How do I do that? I cannot log in????
With the setup I had working for the last two month there were still issues with acces conflict to new subfolders and files inside the shared folder between me and the Macbook account user. I have read that the solution is to create a group and give the group access privileges to the folder. However, I could not find any details on the exact steps to follow. I need the exact steps, otherwise this will turn into the next nightmare. Where can I find this info.
I would really appreciate your help with answers and solutions to these complex issues
Thank youcheck out managed datasources in the manuals
-
Can't connect to websites with any browser. Bookmarks do not work but bookmarks through bookmarks edit works just fine.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Archive file with errors in sender file adapter not working! please help!
Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopaland go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k -
When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanksAre you attempting to sync music from your iTunes Music Library on your PC?
What options do you have set on the Music Tab for your iPad in iTunes?
What happens when you sync?
Any error messages? -
After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6
Additional testing i perform to make wifi work but nothing works out:
i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
wifi was working with older software versions. i think there should be a problem with 8.1.1.
is anyone has fix for this issue? -
The message function on my Ipad just quit working. I was using it while in Mexico and it just quit. I have come home and synced my Ipad with Itunes and function still does not work. How do I get this function to work again?
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
LoïcAccordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit -
I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd like to know how to get the serial number for me to reinstall Adobe creative suite 5 design premium when I am no longer study because I would still like the used? It is not fair if I do anymore because I really need.
You can download Creative Suite 5 here:
Other downloads
To deal with the issue of the serial number and using it again, you'll have to use Web Chat. Here's a link:
Adobe ID, sign in, and account help
See the bottom of the page for a link -
Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.asHi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ -
There is a problem with my apple watch.it is not working well .There is a problem in its charging .The repairers says that contact to your company and ask them to provide you its software.
Please help me.Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
As to your issue, Apple does not and never has made a wristwatch as such. The only thing close to a watch that they have made was the 6th-generation iPod nano:
http://support.apple.com/kb/ht1353#iPod_Nano_6G
which has a clock feature and which some people have worn as a wristwatch. Is that what you mean?
Message was edited by: varjak paw -
I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.
Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.
-
Drawing with a custom profile stroke is not working for me. Does it work for you?
Drawing with a custom profile stroke is not working for me. Does it work for you?
I can only apply it on an existing stroke but can't draw a new one with the selected profile. In fact if I change the profile to other than the default Uniform I also can't draw a new stroke with any other width than the default 1 point. This doesn't seem normal.
Using SC5 on a PC.Another question on the same topic.
Once I add a new profile to the list is it possible to put it on top of the list. I need this because the Adobe people decided to put the list in a tiny scrollable window with only a few of the first profiles showing. If there is noting in the interface may be I have to modify some program files settings?
Maybe you are looking for
-
cant seem to access that library from my second computer- logged in to iclouds.. how do i access my cloud in Itunes from anotehr computer? I also cn plug my device- iphone- into my computer.. but cant hear play back? What in the world am i doing wron
-
Adobe Acrobat Standard v 8 works, but print-to-PDF does not
I've been trying to migrate my main computer usage from an XP desktop to a Windows 7 laptop. I've had Acrobat Standard v 8 on both computers for years but have rarely used the laptop. (I mostly used the laptop as a dumb terminal to reach through the
-
Purchase Requestion for Third Party Sales Order
Hello Team I want the system to create Purchase Requisition automatically and some times Manually (Possible if both Option are available) for the Sales Order which belongs to Third Party. How to achieve this? Thanks Nick
-
I used to be able to open, view and save all PDF files. Now when I receive a PDF as an attachment in email or on a website, it will not open. When I try to save I receive the error message " failed to execute. I use Windows Vista and IE 8. When I
-
WMIC with Arguments/ Parameter while use PROCESS CREATE CALL exe
Hi Team, I want to call exe from remote system using WMIC direct command. for that I prepare one command here WMIC /NODE:"RemoteSys" /USER:"domain\username" /PASSWORD:"XXXXXXXXX" PROCESS CREATE CALL "C:\Program Files (x86)\Company\Product\productapp