Printer showing MFG mode - unable to get it out of MFG mode

I have a HP 3545 all in one printer On switching on the power inlet, MFG mode comes up on the display in printer. I cannot get it out of MFG mode by using Home, Back, Double Home . Please let me know what needs to be done to get it out of MFG mode

Welcome to the forums @dtalukdar !
I read about your Deskjet 345 being stuck in MFG mode. I noticed that the reset you were trying did not help get the printer out of the MFG mode as well.
I would suggest calling us directly so we can discuss what your printer options are with HP.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Best wishes!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

I have loaded the software for my new printer but am unable to get eprint to work properly. the prin

I have a new HP deskjet 3070A printer which I have loaded the software as per the disc that came with the printer but I am unable to get the printer to print emails
Presumably something is wrong with the ePrint set up.
I operate Windows Vista

Hi there keb71,
Sorry you are having trouble setting up and using ePrint. This link should be able to help you:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02728147&tmp_task=useCategory&cc=us&dlc=en&jump...=
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HT201263 iPhone stuck in recovery. Can't get it out!! WHY?

Phone stuck in recovery. Cant get it out. Tried holding home and sleep button simutaneously. Restored phone. Still unable to get it out of recovery.

Place the phone in DFU mode (search Google for instructions) and restore as a new device.

Unable to get LaserJet M175nw to print over network

I have just installed a new LaserJet 100 Pro M175nw printer on my network. However I am unable to get it to print via the network.
The printer is connected to a ethernet cable and configured with a static IP address on the network
I am using a Windows 7 computer for printing
All internal functions of the printer work correctly e.g. copy, reports
Printing works when connected via USB to a computer
When using the printer via the network:
Scanning works correctly
The embedded web mangement page for the printer works correctly
The HP Print & Scan Doctor diagnostics give the configuration all green ticks
Print jobs stay in the print queue until they change to an error status.
The printer does not seem to recognise the print job at all - no progress message indicating printing document on the console
If the printer is in sleep mode it does not wake up
Test print pages from the HP Installer, from the Windows Printer Property dialog, from Acrobat Reader and from MS Word all fail.
All symptoms remain the same when I turn off the Windows Firewall
Another HP LaserJet 2605dn printer on the network prints correctly on a different IP address but also using the RAW format on port 9100.
I have removed all drivers for other HP printers in case there was a conflict - no change after re-installing the software.
Can anyone suggest what I might have overlooked? Thanks for your help.
This question was solved.
View Solution.

I am confused by your last statement, a TCP/IP is a network connection, which is why the universal print driver is suggested.
From what you have described, there is an issue with the print queue. Try running the Print and Scan Doctor :
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
Also, I am not sure if you tried the PCL6 driver or not, but I would like you to at least try it so that I know what its behavior is.
Let me know how that goes and I will get right back with you!
-Spencer

Unable to get the print option in network for Services

Hi Experts
I am unable to get the print for services in CN21/CN22 but the print option is in Disable Mode .How should I get it as to Enable Mode to get print .Pl find the attached screenshot for reference
Thanks in Advance
Ambarish

Hi Ambarish,
There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement only . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
Also check whether you have required authorization to print from SAP
I hope so it will help you
Regards,
Aparna

Lion server: Unable to get printer status

I am attempting to connect a shared printer to my Lion server (for the purposes of printing documents from the server). The printer is connected to an iMac running Lion via USB and printer sharing is on. Other computers on the network are able to add and print to it fine.
The printer adds to the printer list without issue, but when I attempt to print a document, it shows "Unable to get printer status" in the queue. I've added/removed and reset printing system many times, but still no luck. I've also re-downloaded printer drivers from Apple and restarted the system.
Any ideas to get this working? Thanks.

Hi Mike,
One think I really dislike about OSX is the Rocket Science needed to just Print!
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

"unable to get printer status" and "server-error-not-accepting-jobs"

I've got an Intel Mac Pro with Tiger. When I accepted the latest update from Apple, I lost all my defined printers! I've re-added a local USB printer and a networked Laserjet - fine. But I also added a Phaser 850 color printer (networked) which used to work fine. It connects ok, and opens the printer queue window, but when it tries to print, it says "Unable to get printer status (server-error-not-accepting-jobs". The queue stays active (not stopped) but the jobs don't move. I've tried deleting the printer and re-making it - same deal. What's going on?
Mike

Hi Mike,
One think I really dislike about OSX is the Rocket Science needed to just Print!
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

HP OfficeJet Pro 8500 A910 - Unable to get it to copy, receive a fax, scan, or print

Dell Studio
Microsoft Vista .. 64
HP OfficeJet Pro 8500 A910
Up until a week ago, this printer was performing just fine. I am unable to get it to copy, receive a fax, scan, or print.
==============================
Unable to print.
Job in queue. printer screen says "now printing", However, nothing prints.
When I tried to reinstall the drivers, I got ... "Error 0X00000643"
Ran "EndError" scan and fixed any/all problems.
Still ... No Joy. Still .... Unable to print.
Tried printing a "Test Page".
Still No Joy !!
Screen on printer says "Now Printing"
However, nothing happens.
Does anyone have a suggestions?
Thanks In Advance,
EarlLJ

Same problem here. Already got it replaced with a refurb machine three times. Was fine for a while, then it started the same problem again. Any idea, before I toss it out of the window?

I'm unable to get my iPhone out of recovery mode?

My iPhone was on charge earlier this evening, and when disconnecting it to use it again I noticed it had entered recovery mode randomly (I'm still not sure why this happened in the first place) I know usually this isnt a very big problem and you can simply connect it to iTunes and restore it, which I attempted to do, however when doing this my iPhone displayed a black screen with a blinking apple sign and iTunes wouldn't recognise my iPhone. I held the home button down, and iTunes then recognised my iPhone, however when I hit restore, an error sign comes up saying my iPhone cannot be restored - so I am unable to restore my iPhone through iTunes.
I cannot restore my iPhone by holding down the home and power button as my power button jammed just over a month ago randomly (literally woke up one morning and was unable to use it at all) so my iPhone is now stuck in recovery mode and I can't get it out.
I'm going to visit apple tomorrow to see if they can help. I'm still covered by warranty as I've only had my phone just over 11 months. Do you think it's likely they'd be able to restore is via iTunes in store? and if not do you think I'd be able to get a replacement because of this issue and because of my broken power button? Incredibly worried, as I don't know why my phone has even randomly entered recovery mode or why my power button jammed in the first place and I really don't want to end up paying £120 for a new handset when I don't feel any of this was really my fault.

I am having the exact issue as yours, but, I fixed this issue myself and I would like to help many of those suffering from this issue to not be treated by Apple -- when I woke up in the morning I found my iPhone 4 was in "Upgrade to iOS6" mode on the moring that I planed to travel -- my alarm is still alarming me to wake up but the phone could not be used anymore, so fortunately I have backup phone to switch the sim-card to. When I am back home I went to a local "Short Hills" apple store Genius Bar and the staff told me that it could not be fixed, the only way to resolve this was to pay $150 for "Replacement" for a refurbished iPhone - I didn't believe him! My home PC/iTunes can detecte my phone, but the Genius Bar staff said it can't be deteted. I tried many different ways and finally I came up the followings which fixed by iPHone: 1) if you need to backup your stuff within the iPHone, you can use iTools from your PC; 2) Install the latest iTunes; 3) Try to recovery your iphone with iTunes several times and to see if it could be fortunately restored, Pay attention to the error messages, I got (-1) and (3194) which are ok, if they all are not working, then perform the last: 4) download the latest firmware for your version of your phone, such as iphone 4,5, GSM, CDMA, etc and save it into your PC; 5) perform a recovery mode from iTunes, but this time, you are pressing down the "Shift" key while you are clicking the "Recovery iPhone" from your iTunes, it will pop up a window to ask you to upload the firmware, you then select that downloaded firmware and it should fixed you problem and your iPhone will be just like brand new from Apple manufacture! Good luck! -- I have several negative experience with Genius Bar -- they are using refurbished phone with much older screen life LCD to replace my warrenty new phone -- this is apple the policy which are being complaied worldwide!!!! If I had choice, I would not have been using iPhone!

My printer shows it is offline. How do i get this to go online? It is connected to a wired network

my printer shows it is offline. How do i get this to go online? It is connected to a wired network I have run all of the diagnostics from hp's website and everything passes. It will print the test pages from the tests but nothing else. when i do a windows trouble shoot it says turn printer on but its already is on. It can see it on the network but cant connect for some reason.

i run test on printer it tells me it is offline so wont print anything from cmputer

I have been unable to get Photoshop Elements 11 to show in my Open With Programs

I have been unable to get Photoshop Elements 11 to show in my Open With Programs list. The program is installed but will not show in Open With programs.

Hi,
You don't say which operating system you are using so I'll assume Windows 7 for now - try this.
1) select the file that you want to open
2) right click on it and go to the Open With option but select Choose default program at the bottom of the list - the following should open
3) At the bottom of the list, there is Other Programs, you may need to scroll down. If PSE not in the list, continue with the following.
4) Use the Browse button to browse to the following (omit x86 if on 32bit system)
"C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
I'm assuming that you want to open the image in the editor.
5) Uncheck the Always use... option, otherwise double clicking on the file would cause the editor to open by default.
6) Click on OK
PSE should now appear on your open with list.
Good luck
Brian

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Unable to get into config mode in ASA5540

hi,
after issueing the command "aaa authorization command LOCAL" , iam unable to get into the config mode. is there any way to recover without doing password recovery?

Hi,
This link may help you resolve the lockout situation because of AAA settings.
http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/trouble.html#wp1049302

Unable to print PDF files since update. Get "prop res DLL not loaded" message

Unable to print PDF files since update. Get "prop res DLL not loaded" message

This problem has been reported to occur with certain Lexmark and Dell printers. These printers include the following:
Lexmark Z700-P700
Lexmark X1180
Lexmark X1170
Lexmark X1150
Lexmark P706
Lexmark Z25
Dell A940 (Personal All-in-One)
Microsoft has several possible solutions here
http://support.microsoft.com/kb/918730

Printer showing MFG mode - unable to get it out of MFG mode

Similar Messages

Maybe you are looking for