Printer shows paper jamming in output bin but no paper visible in 2605dn

printer shows paper jam in output bin---have reset and cleared everything---still shows same.  What now?

In case you missed something, see this:
http://h20564.www2.hp.com/hpsc/doc/public/display?​docId=emr_na-c00783950
Try a NVRAM reset: (but make sure u save your n/w config 1st)
1. power off the printer
2. holding down the select and cancel buttons and powering on
3. release buttons when display reads "permanent storage init"
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Similar Messages

  • My Ipod wont show up in My Computer. But it is visible in itunes.  HELP!

    OK I have tried everything reseting and exetera.
    It works on my old IBM laptop but on my new Dimension 9150 Dell. I just want to transfer music to my new computer.
    Please Somebody help!

    Check out the instructions/suggestions here.
    Music from iPod to computer.
    There's also another method I've seen posted. I've successfully tested this across several different Windows PCs.
    Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
    Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
    Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
    The music files should transfer to your iTunes.
    However it appears that no playlists or any other info such as ratings/last played etc will transfer.
    If this is important to you, you may want to use other options.
    There's Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer.

  • Laserjet printer p2050 says"output bin is full remove all paper from bin"

    Printer will only print 1 or 2 times then I get the error message.  I have to pull open the paper drawer & slam it closed to get it printing again

    Hi Sharon453,
    When you get this error message, do the flaps in the output bin stay up?  And does the action of slamming the paper tray shut cause these flaps to fall?  It sounds like there may be something sticking that is causing the sensor to think the output bin is full.
    I work for HP

  • Printing to a Specific Output Bin

    I have been asked to setup an output queue in SAP where all output to that printer goes to a specfic (non-default) output bin on the printer. The printer is a HP 8050 multi-function printer with 5 different output bins. I have determined the PJL and PCL codes to direct the output. My problem is that the output will both be ABAP lists and SAPSCRIPT data so I do not want to start changing specific forms or printer formats. How do I modify the printer device so that all output goes to the proper bin?

    Thanks for your reply.  I had previously tried the option in SPAD but had no luck. In my research I turned on logging with the test tool in SPAD and captured the PCL code generated. I am not seeing the code being sent from SAP which specifies the output bin destination. I looked for both the PJL code(set outbin=) and the PCL code (esc&l5G) for bin 5. I am running ECC 6. Are there any known issues with this tray option?

  • Will not print - feeds paper and sounds right but nothing on paper.

    Recently printed resumes and everything was fine.   Replaced ink cartridges and now when we attempt to print something, the paper feeds thru the printer and sounds like its printing but nothing shows up on the paper when it comes out.  When printing from e-mail, it will print  the heading (to, from, subject, etc) but nothing in the body of the emaila prints.  I have aligned print heads and cleaned print heads but still nothing. Any ideas on what the problem could be?
    This question was solved.
    View Solution.

    After I replied that the attempts didnt work, I attempted cleaning and aligning printheads again. This time it worked like a charm. Many thanks for your assistance, you have my neverending heartfelt appreciation.  

  • Printing on photopaper stops in mid-print, says "paper jam"

    Hello!
    I've been trying to print photos on photo papers on the HP Officejet 4355 All-in-One printer.
    I've tried the HP Premium Plus and HP Advanced photo paper in the Paper Type, and Best print quality settings, colored.
    The paper goes in, prints about an inch of the image (in best wuality), but then the printer will stop and the printer would display an error message "Paper Jam."
    I pushed the "Cancel" button, and the printer expelled the paper with no problems (except that i now have a semi-printed photo on my photopaper) and cancelled the print job on the WinXP Printer job dialog box.
    I've only placed one paper in the paper tray, so multiple paper in the rollers is not a problem.
    I've checked all the rollers. I've aligned and cleaned the cartridges. I have no problem printing on normal (substance 20-24GSM) paper.
    I've also tried printing on cards (around 40-80GSM) but the same problem would occur -- paper would go in, will print an inch, stops then printer says paper jam.
    How do get the printer to print completely on the photopaper or on any cards?
    I've checked the user's manual, so far i have not read any troubleshooting solutions for this problem. Apologies for my long post. I hope you can give me some suggestions.
    Thank you very much in advance!
    Warm regards,
    Jade

    Hello there! Welcome to the forums @IdahoElk 
    I read your post about the printer issues you're having with your Officejet 100 Mobile printer. I have a couple of suggestions that may help you.
    First of all, power reset the printer and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 30 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Also, check out this troubleshooting document. Check the issues to see if you can find the description to what you are seeing on your printer.
    Blinking Lights on the HP 100 Officejet Mobile Printers
    If the troubleshooting does not help at all, I would lastly suggest technical support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Happy Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Datamax label print - no paper output - print spool ok

    hi
    we are trying to configure a label printer (Datamax I 4208), we've followed this document http://www.datamaxcorp.com/_assets/library/pdf/sap_91803.pdf and note 894444
    print spool orders are marked as completed but there's no paper output
    printer is configured on a tcp/ip address
    sapsprint is installed and service active
    what else are we missing is there to check?
    thanks in advance

    Hi Maria
    We are trying to print Datamax i4208.
    Here is my Configuration
    The app.server is on AIX
    The Device types we tried:
                   <h5> The LB_DMX LB_DMX as Device Type: LINE PRINTER DRIVER II.
                   The ASCIIPRI </h5>
    1. Printed through LOCL (Front-End Access Method)    -  We do not have SAPPrint/saplpd on our PCs
    2. Printed through a Windows Printer Server (U: Access Method) - The Winddows server has SAPPrint
    3. Printed Locally (L: Access Method): Using the JetDirec setup
    All these 3 methods are not working.... I am a Baiss person.... Would you please give some tips

  • Printer output bin

    Hi,
    we have a printer with multiple output bins. So i want to control the output bin, when i'm printing from any application within the sap system.
    How can i do this? I tried to control this with various default settings on the printserver, but this won't work. Do i have to modify print controls?
    Is there any chance to do this?
    Thanks ahead.

    Hi ,
    Can u try with this .,
    1.     Log on to any client in the appropriate SAP system.
    2.     Go to transaction SPAD.
    3.     On the Spool Administration: Initial Screen screen, under the Devices\servers tab click the Output devices button.  On the Spool Administration: List of Output Devices screen, click on the printer where you need to check the output requests.  Then click on the printer and page picture-icon.
    4.     A list of all pending output requests for the selected printer will be displayed.
    PS :reward point if it is useful
    regards,
    S.rajeshkumar

  • Canon ir 2420 ufrii LT network printer show only processing but print not receive

    My Canon ir 2420 ufrii LT network printer show only processing but print not receive,i have check its ip and network all is fine i also relode this software but result is same , show only processing print not recieve ,please if you have any trick please share ,  Thaks for you support  

    I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
    However there are 2 aur packages that provide the UFRII driver :
    - cndrvcups-lb (built from source)
    - cndrvcups-lb-bin (uses the binaries)

  • HP 5530 wireless printer shows offline but it is turned on, I use a router

    My printer shows to be offline, sometimes it prints pages at random, which I have no idea why or what they are about, kinda scary, It is turned on and the wirelss light is not blinking, but shows offline when i try to prine from my laptop.Its a HP 5530 all in one,windows 8

    Hello @tiogalady,
    Welcome to the HP Support Forums! 
    I would like to assist you today with resolving the 'offline' issues that you're experiencing when trying to print from your Windows 8 computer to your wirelessly connected HP ENVY 5530 e-All-in-One Printer. Now, recently Microsoft has released a Hotfix for the Windows 8 and Windows 8.1 Operating Systems to 'fix' offline printing issues as Microsoft recognizes this as an issue with their latest Operating System. Therefore, to start, I am going to have you run the Hotfix to see if this resolves the printing issues.
    Can I please have you click here to access the Hotfix page. Once the website opens select the 'Hotfix Download Available' button. Allow the Hotfix to run. Please follow any onscreen steps to install the Hotfix.
    Once the fix has completed, please test printing again. Should the Offline issue persist there is an additional driver fix that I may need to walk you through. Please respond to this post with the result of your troubleshooting. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    +For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
    This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
    *Settings I have Enabled*
    5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
    Use Wide Channels is recommended for 5 GHz operation.
    Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

  • Printer has paper, but computer says it is out of paper and won't print from web

    I am having trouble getting the computer to recognize that the printer has paper. The printer will print copies that I put in it, but when I want to print from the web, it won't let me do it; it just tells me that the printer is out of paper. I printed a number of pages from the web yesterday with no problem at all. I have an HP Deskjet F2430.
    This question was solved.
    View Solution.

    I was trying to print off some material I had looked up on the web. When I saw what I was trying to print was going to be 40 pages, I did not want to continue printing it, and I did not know how to stop the printing, so I just pulled out my paper from the loader thing. I have since put paper back in the loader, but now my printer will not print anything, and says I am out of paper. I have tried and tried to fix this problem, and I really need to be able to print stuff, so I am pretty frustrated with this. I am a senior citizen and will admit that I am not all that astute with tech stuff. I would certainly appreciate some guidance with my problem. Thank you very much.

  • Trying to use headphones to watch a show online...  sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

    trying to use headphones to watch a show online...  sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

    trying to do this on a macbook pro...please help

  • I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.

    I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.

    Thank you everyone. I figured it out. I thought that you can use regular paper to print pictures from photos on Ipad. This is not possible. I was able to use regular print paper to print from my mail. My problem is solved!! 

  • Am using PS Elements 8 with Vista.The print menu shows: "Paper Type:Unknown"

    Am using PS Elements 8 with Vista.The print menu shows: "Paper Type:Unknown".I want to use glossy photo paper.How do I do this ?
    Veblen

    Make sure the Printer is installed on your machine. If the printer is not installed on your machine the paper type will come as unknown.
    After installing the printer :-
    1. select the printer in the "Select Printer" setting.
    2. In the Printer setting option click on "Change Settings" button.
    3. Select the paper in the "Paper type" dropdown list.

Maybe you are looking for

  • Software Update 6.1.1 - Not worked!

    Since the latest software update to the iphone 4s my 3G signal is abysmal. I'm talking about the latest 6.1.1. which was meant to solve issues. My imessages take ages to be sent & tend to turn into text messages & also the internet can take over 5 mi

  • I am a newbie plz help me out

    Hello, I am writinf g the very first program and got stuck, the program is : class Tirtha public static void main(String args []) System.out.println("Hello World !!"); I saved the program as Tirtha.java in the Bin folder in j2sdk, but when I compile

  • Podcast Picture... how to change it

    I'm confused. I updated my podcast this evening, and went to submit it to iTunes (which I've never done before) but the picture the "submit" box is giving me is for an old podcast which isn't there anymore, and it's ignoring the graphic I have dragge

  • Wrt54g runs slow

    my wrt54g has been having a problem with running very slow linksys sent me a new one but it is doing the same after a short time. If i connect right to my modem to my pc that is a very fast connection  can any one help me thanks jim

  • Garageband won't run, TRacks failure?

    When we try to run Garageband, we get a succession of error messages like "T-Racks 3 TRacks3 Classic EQ has not been properly installed.  Please run the installer again to fix the problem"  These all refer to TRacks products from IK Multimedia. Also,