Printer shows up multiple times in my device list

I have an EA4500 router running firmware version 2.1.39.145204.  A device, which I assume is my HP printer, shows up on my device list multiple times (11).  This is illustrated below with the devices status report from the "Troubleshooting" tab of my Smart Wi-Fi interface.  The device listed as "Photosmart Premium C309g-m" is indeed my printer.  The MAC address listed agrees with the set-up information in my printer and it is correctly listed as connected via wi-fi.  There is no hard wire connection from the printer to the network..  As you can see, there is a bunch of other devices listed all with the same name.  These devices have the same IP address as my printer but different MAC addresses.   My questions are:
1. What causes this situation?
2. How do I fix it?  By this I mean, how do I remove the multiple listings?
Thank you in advance for your help.
Name MAC address IPv4 address Connection
PKs-iPad
FC:25:3F:9B:5B:66
192.168.1.118
Wireless
HP0026550FA2B0
DC:E0:00:00:B8:C5
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:000:20
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:10:9F
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:109
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:38:A5
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:20:74
192.168.1.128
LAN
Owner-PC
00:23:08:CC:F6:00
192.168.1.130
LAN
PETER-LAPTOP-WiFi
00:1D9:68:F2:E0
192.168.1.122
Wireless
David Cohen’s MacBook Pro
00:23:6C:92:CE:22
192.168.1.104
Wireless
Photosmart Premium C309g-m
00:26:55:0F:A2:B0
192.168.1.128
Wireless
HP0026550FA2B0
DC:E0:00:00:20:AA
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:000:B4
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:98:81
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:18:A9
192.168.1.128
LAN
Name MAC address IPv6 address Connection

Hi sgtpepperlhcb2! Duplicate MAC and IP addresses in the DHCP list can be an indication of a possible firmware problem. I suggest you upgrade the router's firmware. Reset and reconfigure the router if the firmware upgrade will not work.
Here's an article that may help.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d2d5c9da8e68439883b85a9cf72bf7e5_How_to_upgrade_th...

Similar Messages

  • Adobe DNGConverter 8.1 is showing multiple time as a device

    Adobe DNGConverter 8.1 is showing multiple time as a device on my iMac running OSX 10.9.  Today it shows 18 times.  I have not launched any Adobe software today. 

    I am Windows, so I have ZERO information on how you tell a Mac not to load software automatically

  • Can't print a photo multiple times on a single page

    I just installed iLife 8 and am trying to print one 3X5 photo multiple times on a single page. When I consulted the help menu in iPhoto, I found what I thought was the answer. When I followed the instructions, I hit a snag because I don't have the Photos Per Page pop-up menu it references. Any ideas on how I can do this to save paper?
    Here's what the help menu said:
    Printing one photo multiple times on a single page
    If you have a favorite photo you want to share with many people, you can print multiple copies of that photo on a single page.
    To print one photo multiple times on a single page
    Select the photo you want to print.
    Click the Print button.
    Select the paper size (such as letter-size or legal-size).
    Select the print size (such as 2 x 3 or 4 x 6).
    If you want to make the photo a custom size, select Custom.
    Click the Customize button.
    Click the Settings button.
    Select “Multiple of the same photo per page” from the Photos Per Page pop-up menu.
    iPhoto will zoom and crop the photo to fit the space available. To make a photo appear full-frame, Control-click the photo and choose “Fit Photo to Frame Size” from the menu that appears.
    Click OK.
    Click Print.

    Well don't I feel stupid! I just installed iLife '08 and assumed that it would tell me right away if I needed any updates. I found and installed the needed updates (7.1.1), I got the right settings drop down menu to print multiples on one page. Thanks for your help

  • To print one photo multiple times on a single page

    The title of my question is the title of the page in iPhoto 8 help.
    "To print one photo multiple times on a single page"
    It says (a bit shortened) 1. Select photo 2. Click print button 3. Select paper size 4. Select print size 5 Click Customize button 6 Click Settings button 7. Select "Multiple of same photo per page from the Photos Per Page pop-up menu. 8 Click OK 9 Click Print.
    I can not find the pop-up menu referred to in Step 7. There are two "settings" buttons - neither produce a Photos Per Page pop-up menu. Settings appears if you click a double arrow to the right in the lower margin but only deals with font issues and "Print Settings" does not offer such a pop-up.
    I am using Leopard on a PowerBook G4 and just bought and installed the newest iLife 8.
    Grateful for help.

    Arthur:
    When you click on the Customize button there will be a Setting button in the next window. Click on it and in the drop down window that comes up will be the option to print multiple photos of the same photo per page.
    Select that option and click OK. You'll get the spinning cursor for a few seconds as iPhoto creates the multiple copies on the page you selected. Be sure that the print size is small enough so that you can have multiple copies of it on the paper size you selected.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • MacBook shows up multiple times under 'Shared' in finder

    My MacBook keeps showing up multiple times under 'Shared' in the Finder sidebar. All sharing services are turned of in System Preferences. The number in the computer name is automatically added. When I change the computer name to another name, all existing 'ghost computers' stay there in the sidebar.  How do I get rid of these?

    Known bug. Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer
    Some people have managed to stop this behavior by going to System Preferences/Sharing and stopping all sharing except screen sharing.

  • Servers showing up multiple times in Sites and Services

    I happened to catch something odd this morning while looking into another issue.  When i open our domains Sites and Services and click on one of our 4 corporate DC's (3vm's one physical one of them being tested in production with server 2012 R2). 
    I'm seeing that a few of our servers in remote locations are showing up multiple times.  However when I go to this server and click on who it's replicating with it's only showing one server and sometimes not even the same one as the corporate server. 
    Here is a screen shot I took.
    The red's are all the same server (sorry boss has mandated we aren't allowed to put out the names for some reason).  I'm a little confused as to what could be causing this.  Anyone have any ideas?

    Without better/more screenshots, it a bit hard to tell what you are seeing. However, in your statement
    "...I'm seeing that a few of our servers in remote locations are showing up multiple
    times.  However when I go to this server and click on who it's replicating with it's only showing one server and sometimes not even the same one as the corporate server."
    Replication is one-way connections and are always a PULL scenario. So for instance if
    COR-DC-03 is replicating from COR-DC-01, the replication link will only be on COR-DC-03. COR-DC-01 may or may not replicate from 03. It may actually be replicating from another DC. Also, the AD ISTG (intersite topology generator) will always try to find the
    most efficient replication and ensure that each DC has at least 2 replication partners, and there is no more than 4 hops to another DC. You have a number of sites and I assume there are DCs in there as well. All of those DCs need to replicate with one another.
    Perhaps if you can draw or otherwise illustrate the issue you are seeing that would help.
    Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

  • The same podcast shows up multiple times

    In iTunes, the same podcast shows up multiple times. There is only one copy of the file on my computer, and the file it located in the right location, but in iTunes, the same podcast is repeated two or more times. When I delete a single podcast and try to play its copies, iTunes notifies me that it can't find the file. I believe this happens when I use the import folder utility and add music in the iTunes music default location (which includes the podcasts as well as the music I want to import). Does anyone know how to keep this from happening?
    Thanks

    Well, the easiest way would be to stop using the import folder utility. Sounds like you're adding the podcast multiple times. You're probably doing it to other files as well...

  • Artists show up multiple times in Artist listing

    When I get a listing of songs by artist on my iPhone, some artists show up multiple times in the list. It's not that way on my computer. For instance, Death Cab for Cutie shows up twice, with different albums listed with each. However, some albums show up in both listings, but each with only partial selections of the songs on that album. So the first instance of DCC has album 1 with tracks 1-4 of the album and the second instance of DCC has album 1 with tracks 5-11.
    I went so far as to highlight all my DCC songs on iTunes on my computer and pasted DCC into the Artist line of each song and then re-syncing. No change.
    Any clues?

    Just wanted to add to this problem. I'm having the problem with Death Cab for Cutie and Kings of Leon. They show up twice on the artist list on my iPhone, but only once on my computer.
    My biggest concern is that it's taking up twice the space on my phone.
    If anyone has a solution to this it would be great!
    Thanks.

  • Printing One Address Multiple Times

    Hi All,
    I am using the label format portion of Oracle Reports and I am trying to display/print one address multiple times based on the user's input. Is this possible? Any coding example would be greatly appreciated. Thank you for your help in advance.
    Michael James

    You could pass this value as a parameter to the report and add a where clause to the report that limited the numbers returned based on this parameter. This is essentially what Kevin's doing in his example (the reference to :copies_required).
    Incidentally, there's another way to do this without creating a new table of integers. You can get the same result by using the rownum pseudo column (as long as you have a table with at least as many rows as the number of times you want the address to repeat). You can then create one driving query:
    select rownum from table
    where rownum <= :number_of_copies
    and a detail query:
    select address from address_table
    Link these queries with a group link and generate a default layout. Delete any columns in the 'rownum' repeating frame and run - you should get the address repeated the number of times specified in :number_of_copies.
    Hope this helps,
    Danny

  • IPhone 4 on ios 5 - recurring events show up multiple times

    I updated my iPhone 4 to ios 5, and ever since, recurring events are showing up multiple times on the same day.  When I sync, it seems that another copy is added to my iPhone's calendar (only one event is in iCal).  I originally had a custom event that repeated every Tuesday and Wednesday.  I tried to change this into two events - one for each day - and it still has the issue of multiple events on the same day.
    Notes I add to these events do not sync back to my computer, either.
    I have tried wiping the calendars from the phone and syncing with what is on my computer, but I continue to have the same problems.
    Any help/advice out there?  It's more of an annoyance than anything!

    At least one of them is only using the cellular data or wi-fi at the moment.  His computer is on the fritz and he has not been able to sync with itunes for a while because of it.  I am not sure about the other colleague as she is out fo the office at the moment.

  • All of a sudden my home sharing computer is showing up multiple times on my apple TV.

    All of a sudden my home sharing computer is showing up multiple times on my apple TV.  When I go into the home sharing selection my computer shows up 2-3 times.  It is now happening on both my 2nd and 3rd gen Apple TV.  Does anyone else have this?  How do I fix this?  Thanks!

    Weird.  Restart everything including your router.

  • ?, How do I get Apple tv to show on my imac in the devices list?

    How do I get Apple tv to show on my imac in the devices list on itunes?

    This is only possible with the first generation Apple TV, as you can sync items to it. The second generation Apple TV does not do this.

  • Albums in music showing up multiple times

    I just upgraded to 3.1 and now albums in my music show multiple times, but when I click on any one of them, the whole album lists to play. How do I eliminate all the duplicate listings in the album section of my music?

    To fix this I had to go into iTunes and check a few things. First go to the album that is giving you trouble. Start with the first song and "Get Info" (right click on PC not sure on Mac). Select the "Info" tab at the top and go through each song on the album. Make sure each song has the EXACT same album title. Other things to check are album year and album artist. Different capitalized letters may also cause your problem (The is not the same as THE). If all else fails try also selecting the "Part of a compilation" radio button for all songs part of the same album.
    Message was edited by: Freakwithissues

  • Viewer shows data multiple times

    Hello everybody,
    after the answer i got from the thread  , i edited my code.
    But i got the problem, that i received the data multiple times.
    The information are still the same like written in the other thread.
    I work on three tables: Adressen, Auftragseingang and Arbeitspläne.
    In the detail section of the Report i want to show the data of the table Arbeitspläne and in the header section i want to show data of the tables Adressen and Auftragseingang.
    This is the code i wrote:
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Windows.Forms;
    using CrystalDecisions.Shared;
    using System.Data.SqlClient;
    using CrystalDecisions.CrystalReports.Engine;
    using CrystalDecisions.Windows.Forms;
    namespace CrystalReportsApplication1
        public partial class Form1 : Form
            public Form1()
                InitializeComponent();
            private void button1_Click(object sender, EventArgs e)
                SqlConnection connection = new SqlConnection("Data Source=SRVVMSQL001.de.eurodok.org;Initial Catalog=PROPLANOrg;Integrated Security=True");
                SqlCommand command;
                DataSet ds;
                try
                    command = new SqlCommand();
                    command.Connection = connection;
                    command.CommandType = CommandType.Text;
                    command.CommandText = "SELECT * FROM Auftragseingang, Arbeitspläne, Adressen WHERE Auftragseingang.[Auftrag-Nr] = 113 AND Auftragseingang.Kundennummer = Adressen.Kundennummer AND Auftragseingang.[Zeichnung-Nr] = Arbeitspläne.[Zeichnung-Nr]";
                    connection.Open();
                    SqlDataAdapter dataAdapter = new SqlDataAdapter(command);
                    ds = new DataSet("ABC");
                    dataAdapter.Fill(ds, "Auftragseingang");
                    dataAdapter.Fill(ds, "Adressen");
                    dataAdapter.Fill(ds, "Arbeitspläne");
                    CrystalReport1 cryRpt = new CrystalReport1();
                    cryRpt.SetDataSource(ds);
                    crystalReportViewer1.ReportSource = cryRpt;
                    crystalReportViewer1.Refresh();
                    SqlDataReader dataReader;
                    int i = 0;
                    dataReader = command.ExecuteReader();
                    while (dataReader.Read())
                        i++;//hier werden die ausgelesenen Datensätze gezählt
                    MessageBox.Show("Message: Anzahl Datensätze: " + i);//hier kommt der richtige wert raus, was die Anzahl der Datensätze angeht||jedoch wird im Report ein vielfaches angezeigt
                catch (Exception ex)
                    MessageBox.Show("Message:
    " + ex.Message + "
    " +
                                     "Data:
    " + ex.Data + "
    " +
                                     "InnerException:
    " + ex.InnerException + "
    " +
                                     "StackTrace:
    " + ex.StackTrace + "
    " +
                                     "TargetSites:
    " + ex.TargetSite,
                                     "[" + ex.Source + "] FEHLER - Programm wird beendet.", MessageBoxButtons.OK, MessageBoxIcon.Error);
                finally
                    connection.Close();

    More than likely that is a table linking or report design issue. In either case, the best thing to do will be to post the query to the [SAP Crystal Reports Design|SAP Crystal Reports, version for Visual Studio; forum. When you post to that forum, a link to a screenshot will also be helpful.
    Umm, also you mention that the answer on the other tread (Report shows no data in the Viewer )  was correct and helped you to resolve the issue of displaying the report in the viewer. Yet all you appear to have done is closed the thread without awarding any points(?).
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • I keep getting a server error and my emails are not deleting and showing up multiple times

    I am getting emails multiple times and they aren't deleting.  They keep coming back.  I then get a server errer that mail.me may be a false server pretending to be mail.me.  Don't know how to fix this.

    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

Maybe you are looking for