Printer skips lines and enlarges font between web based pages.

'''bold text'''HP c7200 printer connected wirelessly to MacBookPro w/Lion. Using Firefox 9.0.1 browser. Printer prints first page just fine and then starts second page by skipping several lines and printing in larger font. PC also connected to same printer, and printer works OK. Safari works OK, too. Solutions would be appreciated.
Problem began prior to upgrading to Mac Lion. Lion has updated printer driver. Same problem. Only occurs when trying to print a web page or something downloaded from a web page, such as a financial spreadsheet. Non-web-based documents print OK. Help. Thanks.

I've seen this happen when the Page Setup on the FireFox browser was set to 80% (or probably anything less than 100%). Check that setting and change to 100% and reprint.

Similar Messages

My pixma printer skips lines/text only in black

My pixma printer skips lines/text. Color prints fine. Anything printed with PGBK (5) does not. I have cleaned the printer head by removing the carriage that holds the cartridges and using a Q-tip. That did not work. It seems that many people have this problem, but nobody can solve it. Note, the problem is in the printer, not the computer, as the test sheet does not print the PGBK correctly (skips some of it). I almost suspect that the printer prints fine when the cartridge is going in one direction, but when it comes back, it doesn't print at all as the pattern is very regular. Like this:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Has anyone solved this?

Hi, ChesterJ!
So that the Community can help you better, we will need to know exactly which printer model you're using. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Trouble printing e-mail and web based pages

I have a Envy 4500 all in one. Can't print body of e-mails and some web based pages from myToshiba laptop. It will print fine from my I-Phone using e-print. Do I need to enable a setting somewhere?

Hi
Printing from websites is sometimes tricky. Have you tried using SmartPrint?
http://h41112.www4.hp.com/smartprint/us/en/smart.html?jumpid=ex_r602_ww/en/hho/ipg/xx-mu-aw_chev/sma...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Load-balancing and fail-over between web containers and EJB containers

When web components and EJB components are run in different OC4J instances, can we achieve load-balancing and fail-over between web containers and EJB containers?
null

It looks like there is clustering, but not loadbalancing available for rmi
from the rmi.xml configuration. The application will treat any ejbs on the
cluster as one-to-one look-ups. Orion will go out and get the first ejb
available on the cluster. See the docs on configuring rmi.xml (and also the
note below).
That is a kind-of failover, because if machine A goes down, and the
myotherAejbs.jar are on machine B too, orion will go out and get the bean
from machine B when it can't find machine A. But it doesn't go machine A
then machine B for each remote instance of the bean. You could also specify
the maximum number of instances of a bean, and as one machine gets "loaded",
orion would go to the next available machine...but that's not really
loadbalancing.
That is, you can set up your web-apps with ejbs, but let all of the ejbs be
remote="true" in the orion-application.xml file:
<?xml version="1.0"?>
<!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application
runtime 1.2//EN" "http://www.orionserver.com/dtds/orion-application.dtd">
<orion-application deployment-version="1.5.2">
<ejb-module remote="true" path="myotherAejbs.jar" />
<ejb-module remote="true" path="myotherBejbs.jar" />
<ejb-module remote="true" path="myotherCejbs.jar" />
&ltweb-module id="mysite" path="mysite.war" />
... other stuff ...
</orion-application>In the rmi.xml you would define your clustering:
<cluster host="230.0.0.1" id="123" password="123abc" port="9127"
username="cluster-user" />
Tag that is defined if the application is to be clustered. Used to set up
a local multicast cluster. A username and password used for the servers to
intercommunicate also needs to be specified.
host - The multicast host/ip to transmit and receive cluster data on. The
default is 230.0.0.1.
id - The id (number) of this cluster node to identify itself with in the
cluster. The default is based on local machine IP.
password - The password configured for cluster access. Needs to match that
of the other nodes in the cluster.
port - The port to transmit and receive cluster data on. The default is
9127.
username - The username configured for cluster access. Needs to match that
of the other nodes in the cluster.

When printing Apple articles on a Mac 10.7, some of the text is lost and the font is larger on pages 2 and on.

When I print Apple support articles, the font size increases from page one to subsequent pages and some of the text is lost. This is true on Canon i960 and MG 8120 printers. It does not happen on other multi page documents. It is only true with Firefox. Safari works fine.

Please provide a public URL or reduced test case that exhibits this issue.
Does it appear correct in Print Preview?

Where can I find bold and enlarge font that was available before I downloaded new firefox version ????

where is the toolbar that let me bold and enlarge font ?????

You can right click the tab and choose "Close Tab" to close a tab.
Some menu entries are hidden by default and only appear if you use the keyboard to open the menu.
You can see the difference if you use Alt+F or Alt+B to open the "File" and "Bookmarks" menu and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by pressing Alt or by pressing F10.
Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.

What problems does one encounter when one attempts to download e-Books which are printed in German and purchased through German web sites onto an iPad purchased in the USA?

What problems does one encounter when one attempts to download e-Books, which are printed in German and purchased through German web sites,
onto an iPad purchased in the USA?

No problem whatsoever so long as you have a German store account which can only be registered using a German credit card which is registered to a German street address

Firefox goes off line and cannot search the web

I use Firefox to run facebook and play Kingdoms of Camelot. i have a number of user scripts downloaded which enable KOC to run when I am at work or sleeping. However most morning when i get up i get the message that Firefox has gone off line and cannot browse the web. I have checked my internet settings and i do not have have power save settings set etc. Also I have left Google chrome running all night as well and I have no problems. It only occurs with Firefox. Any help would be appreciated.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Print A6 pepper and its should stop on next page but it take two a6 pages than stop

I have HP laserjet 1320n printer and i want to print a6 pepper and its should stop on next page but it take two a6 pages than stop

Hi syedraji007,
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP Laserjet 1320n is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printers - LaserJet board. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet 1320 Printer series supportpage helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Cannot Access Routers Web Based Page?

I have a wireless Linksys router Model WRT54G and it will not let me access my routers web based page. When I enter the default IP address into the Address Bar nothing happens (I've checked to make sure my router is on the default IP), i just get a blank screen, no pop-up or anything. Help?

Note that the router's "web pages" are built into the router. You do not need to be connected to the Internet to see them.
To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

How can the DFF created for a PO form be used in PO web based page.

Hello,
I have created a DFF on the PO form using the attribute2 of the PO_HEADERS table. How can I create a DFF on the web page based 'buyer work center' page. My final goal is to use DFF for both the web based pages and forms.
Thanks for your help
Raj

hello Pradeep,
Whats the difference b/w DFF and custom DFF ?
I'll tell the steps what I did.
1. Application Developer > Flex Field > Descriptive > Register
Registered a DFF for PO_HEADERS_ALL table and used Attribute2.
2. Application Developer > Flex Field > Descriptive > Segments
So I used the DFF in the PO form. I want to see a DFF in the PO page also when the below navigation is used.
Purchasing: >Buyer Work Center>Orders. Opens a PO page.
Thanks for the help.
Raj

Adding new line and sapaces in between the text in AI Script

areaText.contents = "This is an Area Text in a rectangle. See how it flows to the next line.";
i want to break the sentance from 'Text' ie i want to add new line in between and also some more spaces can any one plz help
for example
I want to write the above text like this way
this is an Area
Text in a rectangle.   See
    how it       flows to the
next line

that's a much better explanation, you didn't have to create another thread, you could have replied to my reply in the original thread.
we use the "\r" character to insert a new line and we can use "\t" to insert a "tab" for the spaces, or the actual spaces in a variable
var sixSpaces = "      ";
areaText.contents = "This is an Area\rText in a rectangle." + sixSpaces + "See\r" + sixSpaces + "how it" + sixSpaces + "flows to the\rnext line.";

Wingdings and OCRB fonts in Web Intelligence 4.1 : not possible in pdf

Dear all,
I have a Web Intelligence document containing Wingdings and ORCB fonts.
This is possible in Web Intelligence 4.1 HTML viewer and editor.
However, when you export the Web Intelligence document to pdf, these fonts are changed to Arial :
Does anyone has a solution to display the Wingdings and OCRB fonts in pdf ?
According to SAP KB http://service.sap.com/sap/support/notes/1825538, it should be possible from 4.0 SP8. I'm on BI 4.1 SP02 Patch 2
Thanks
Hans

I fixed it as follows:
1. Modify the fontalias.xml
Location :
Solaris : /(install_dir)/sap_bobj/enterprise_xi40/solaris_sparcv9/fonts
Windows :
(instal_dir)/SAP BusinessObjects Enterprise XI 4.0/win32_x86/fonts
(instal_dir)/SAP BusinessObjects Enterprise XI 4.0/win64_x64/fonts
To be added : see attachment : fontalias.txt
This is sufficient for a deployment on Windows
2. In case of Solaris
To be more precise : when the Web Intelligence Processing Server runs on a Solaris box, copy the ttf-files in the directory (see attachment) :
/(install_dir)/sap_bobj/enterprise_xi40/solaris_sparcv9/crpe/fonts

HP 6940 suddenly printing with lines and red hue

Hello,
I was printing photos tonight with my 6940 and suddenly the photos started coming out with the first half (left sides) printed correctly, and the right half has a red hue and striated lines. I thought the black cartridge might be out, so I replaced it and the photos are coming out the same. I've just replaced the color cartridge a few weeks ago, so it is not empty. Any suggestions?
I tried printing 5 photos, and all came out the same way - left side is printed correctly, right side is ruined.
Right-click here and choose "Save As" to download a high res photo of the photos as they are coming out of the printer.
-Gina

Hi CrazySaguaro,
It appears as if your colour cartridge is out of ink. If this is the case you should be able to see this in your ink gauge through the driver tool box.
Here is steps how to check this
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00575972&lc=en&cc=us&dlc=&product=467980
it is located approx half way down the page
Please let me know what you find out.
Although I am an HP employee, I am speaking for myself and not for HP

Vertical faded pink lines and pixelated fonts in the Menu, how to fix?

Hi there,
I bought my iMac in Jan 2010, and just after my Apple Care expired three years later I started to have some problems I have no idea how to fix, hope someone can help.
When starting the computer, I get either a grey screen (I cannot go further or see anything else), or after starting the computer, seems like only the screensaver works, and if you try to open any menu, you'll get a black screen.
All this happened right after the last update.
I followed all the steps advised by Apple to fix the grey screen, but none of them worked.
I also formatted the hard drive (I was using 10.8) and installed other OS (10.6).
It worked well, except that I got now time vertical faded pink lines right after starting the computer, and the fonts in the menu looks like pixelated, they're not clear. but it only happens with the menu, Safari and other programs look fine.
Any idea what's going on?

This looks as though you may have a failing GPU.
You can try these resets that may help, but it looks like a hardware failure.
You may want to take it in to an Apple store genius bay, they will diagnose it for free and give you your options.
Reset SMC:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

Printer skips lines and enlarges font between web based pages.

Similar Messages

Maybe you are looking for