Printer Software not Working for Windows 8.1 and Drivers not Working with USB 3.0

We have a HP CM1312 MFP. We recently got two new windows 8.1 machines. We tried downloading and installing the windows 8 64 bit software, but everytime we tried installing the software the software program would exit abruptly. 
We then tried just downloading the printer drivers and installing these. They installed ok, but when we tried to connect the printer via USB it said the printer did not support USB 3.0 which are the only ports we have on the new computers. 
Is there a solution to either of these problems? Without the software we cannot use the fax or scanner. 
Thanks.

Can you connect USB 2.0 data drives?
What make/model are the computers?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

  • Nano not recognised on windows or itunes and will not charge, help!!!!

    i went to update my ipod the other day and it said that the ipod was corrupted, so i took it out and pluged it back in again and it worked fine. then i went to charge my ipod on the computer a couple of days later and its not regognised on windows or itunes and will not charge!
    i have reset, restarted and updated etc and nothing has happened. i have read other thru peoples messeges who have simular problems and they say that reinstalling and reseting to factory conditions doesnt work.
    can someone please help me or has any one had the same problem? thanks

    can i put it into disk mode if the computer doesnt recognise it at all?
    Yes, you can.
    "Putting your iPod into disk mode" is simply a process that involves pressing a few buttons on your iPod, getting it into Disk Mode.
    To put your iPod into Disk Mode, follow the steps in this article -> Putting your iPod into Disk Mode
    As Bryan said, see if the iPod is recognized by your computer when it's in disk mode.
    -Kylene
    If any post helps or solves your problem, please click the "Solved" or "Helpful" buttons on top of that post. Thank you for helping the boards!

  • Ipad.  3g 32 gb will not sync in window 7 environment and is not shown as a device nor is shown in itunes. followed instructions but no joy...

    Ipad Indicates that it in rh top corner that it is not charging, but actually does charge. is not shown in itunes as a device and wi ll not synch. in windows under device manager is not recognized as a device. tried trouble shoot suggestions in the support section of itunes, but no luck...

    Do you have the absolute latest version of iTunes installed on your computer.  iPad 2 requires the latest version and if your version is older, it must be updated.

  • Usb keyboard not working in windows xp pro sp2 , drivers not installing rig

    I just got this mac book pro. Haven't owned a mac sense LC II.
    I got a stand for the notebook at www.raindesigninc.com the mstand and I got the $50 aluminum usb keyboard apple sells.
    I installed windows xp on a 50 gb partition, put the bootcamp in got all the drivers installed.
    Then I got to the office today plugged in my apple keyboard and it was not recognized. I didn't have the bootcamp cds with me at the office.
    Are the drivers for the aluminum apple usb keyboard on the bootcamp cd?
    I've done some searching on google, and the only solution that i've read is downloading a new version of bootcamp then using a program called transmack to pull the driver out of the bootcamp image file. I hope there is a simpler soution that won't take up so much time.
    So do I need to put bootdisk in again to get the drivers for this usb keyboard? Or how can I get this to work as it is now the usb keyboard doesn't work. I had to take the laptop off of the mstand and use its own keypad.

    found out i just needed to put in the cd that came with the mac book pro

  • Windows Media Player for Windows 7 corupted and will not open

    My Windows media player was working until just recently I got this Notice.
    The file wmploc.dll has version number of 12,0,7601.18150  where 12,0,7601,17514 was expected.
    Windows media player is not installed properly and must be reinstalled.
    Do you want to install the player from Microsoft web SIte?  I have gone to web site and it will not download.
    For Windows 7 Home Premium.  the download says that my computer in no combatable.

    Hi，
    Windows Media Player 12 is compatible with Windows 7, other editions will be not compatible, so where did you download this WMP?
    In addition to the solutions provided by Balaji Kundalam, you can also try this,
    If you have any other 3 rd party music player installed, I suggest you uninstall them first, cause some 3 badly code program can cause the corruption of WMP, then go to Control Panel\Programs and features\Turn Windows Feature on or off, scroll down
    to Media Feature, untick it, restart your PC, then go to the same place, re-tick this option, restart PC.
    If for some reason the re-installation of WMP is not clean, once uninstalled, try go to %ProgramFiles% (and %ProgramFiles(x86)% for 64-bit OS) folder, and delete the Windows Media Player folder.
    Yolanda Zhu
    TechNet Community Support

  • Description for Windows events 0 and 16 not available

    In Acrobat Reader DC v7.20033, the descriptions for Windows 8.1 events 0 and 16 are not available.  The application is throwing these events.  I don't know if they are important.  Please update the build so the descriptions are included.

    Hi，
    Windows Media Player 12 is compatible with Windows 7, other editions will be not compatible, so where did you download this WMP?
    In addition to the solutions provided by Balaji Kundalam, you can also try this,
    If you have any other 3 rd party music player installed, I suggest you uninstall them first, cause some 3 badly code program can cause the corruption of WMP, then go to Control Panel\Programs and features\Turn Windows Feature on or off, scroll down
    to Media Feature, untick it, restart your PC, then go to the same place, re-tick this option, restart PC.
    If for some reason the re-installation of WMP is not clean, once uninstalled, try go to %ProgramFiles% (and %ProgramFiles(x86)% for 64-bit OS) folder, and delete the Windows Media Player folder.
    Yolanda Zhu
    TechNet Community Support

  • TX1120US, Windows 7 RC and drivers that work

    Is HP planning on offering Windows 7 drivers that work with the TX1120US Pavilion Laptop?  I was recently warned that my Windows 7 Beta needed to be upgraded to Windows 7 RC (by Microsoft) and so.... I forged ahead.  However, many of the devices on the TX1120US are not working?  A big for instance, I tried to use my projector with the Windows 7 OS and the projector did not recognize any signal coming fromt the VGA port.  Another is that I can't adjust the display from standard VGA!. Other items don't work either.  I tried using Vista 32 drivers and the install program for the drivers stated that the OS (Windows 7) was not recongized.  Help!
    Thanks

    I installed 7RC on my tx1120, and had similar problems, then today when I ran Windows Update there were two sets of drivers from Nvidia that clear up most of the problems I was having with drivers on the TX -- including the screen resolution problem you mentioned.  There is still one driver missing -- (i.e. one "unknown device") I keep on getting the "dingdong" sound when a USB device is inserted -- I suspect a problem with USB drivers is causing this... however, it doesn't really interfere with my usage of the TX.  The touch screen is working, to the extent that I've tried it, I never use the touch screen for entering text.
    On another thread, I noticed an HP support person chime in that HP would offer an upgrade path when Microsoft releases 7 later this year.
    /p 

  • ITouch not connecting to windows or itunes, and will not charge.

    Okay, so, I was charging my iTouch one day in my computer, and every time I plug it in, iTunes launches and then starts to automatically sync my iTouch, which I DO NOT WANT. Anyways, I quit the sync from itunes as I always do, but this time, when I tried to quit, nothing happened and itunes froze up. 1 Ctrl+Alt+Dlt later, I tried to end the program, it was being pesky so I had to try and end it a few times. My iTouch finished charging and I hane not thought anything of it since then. The day after that, I was trying to charge my iTouch before work, and I went to get ready while it was charging. I came back to an iTouch that was not charged at all. It does not connect to Windows or iTunes, but still for some reason retains enough battery to display the battery symbol. I have used the iTunes helper to try and guide me through the problem, but the steps I took did not fix the problem and I do not feel like taking my iTouch in to get serviced. So, in overview, my iTouch will not charge, connect to windows or iTunes, all after I ended iTunes from the task manager. My iTunes works just fine, my iTouch is the problem. I dont know what operating system it is running on, and I dont know how to update it, but it is at least 4.3.1.
    P.S. I would love to get some speedy help on this. If its any reward, you have many internets up for grabs for answering my question. Over 9000 ^_^

    - Try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try placing the iPOd in recovery mode to see if that will make the iPod visible in iTunes so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • What is the URL for Windows Sound Recorder and is I compatible with podcast

    I have recorded a podcast on Sound Recorder on Windows XP and i want to know how i can find the URL and if it is Podcast compatible. It is a wave audio file. Can you guys please, please help me!!!????
    W4065 Emachines   Windows XP  

    A recording you made in Windows Sound Recorder, until you do something else with it, is NOT on the Internet and has no URL at all.
    .Wav files are not suitable for direct use as podcast episodes as they tend to be uncompressed which makes them shockingly huge to download. You'll want to convert it to mp3 format to make it sensible for sharing.
    You'll then need to either upload it to a managed podcasting service, or post it on your own blog, or any of the other normal ways of doing the "podcasting" step of podcasting. There's plenty of howtos and walkthroughs on various ways of doing this.

  • My phone keeps flashing up with 'this device is not accessorised for this i phone and its not plugged into anything, can anyone help?

    my iphone 4 keeps flashing up with 'this device is not accessorised for this iphone' and its not plugged into anything, can anyone help?

    The most common reason for this message is, the iPhone dock port needs to be cleaned, use a clean dry tooth brush. See if this helps. If you keep getting the message, then clean the dock port again very carefully with isopropyll alcohol, expecially the pins which are on top of the dock mid rib. If still problems make appointment with Apple Genius.

  • Cannot view or play audio or video coded for windows media player, and do not see javascript

    I designed a website that uses a little bit of JavaScript. It displays fine in IE (9), but not in Firefox. Does anyone know why, and what the fix is?
    Also, and more importantly, I coded audio and video files with Windows media player's class id. They will not show or (obviously) play in Firefox. I downloaded and installed the plug in for Firefox, but no change. I'm sure I'm not the only one to have run across this problem, and I'm surprised that Mozilla hasn't built a fix in the 4.0 version. So, any ideas out there?
    Thanks!

    Firefox won't play the media file if there is a classid specified in the object tag. You either need to use conditional code to hide an object without classid for Firefoz from IE or use an embed for Firefox.
    <pre><nowiki><object id="(ID)" type="application/x-oleobject" classid="CLSID:6BF52A52-394A-11d3-B153-00C04F79FAA6">
    <param name="(NAME)" value="(VALUE)> // enter parameters for IE here
    <!--[if !IE]>-->
    <object data="(SOURCE)" type="application/x-mplayer2" height="xxx" width="xxx">
    <param name="(NAME)" value="(VALUE)"> // enter parameters for Firefox here
    </object>
    <!--<![endif]-->
    </object>
    </nowiki></pre>

  • HT1473 I am a songwriter and new at this.  Can I upload my work for sale on Itune and does Itune interact with the Performing Arts organization?

    I am a songwriter and want to upload my work to itune but I need a few question cleared up.
    1.     Does Itune interact with the Performing Arts organization such as BMI in order for artist to be paid or do i just set up a paypal account and pay artist myself?
    2.     What percentage of sales does itune take or is it a flat rate?
    3.     When i upload does itune give me an option to set price for my work.?

    TownSquareTheMusic wrote:
    I am a songwriter and want to upload my work to itune but I need a few question cleared up.
    1.     Does Itune interact with the Performing Arts organization such as BMI in order for artist to be paid or do i just set up a paypal account and pay artist myself?
    2.     What percentage of sales does itune take or is it a flat rate?
    3.     When i upload does itune give me an option to set price for my work.?
    Town Square,
    In addition to the iTunes Store, you may wish to check out some of the online stores that may be a bit more flexible for artists just starting to sell online:
    NoiseTrade
    BandCamp

  • TS1277 I bought a new computer and itunes request me to authorize the new computer.  Howerver it is using an email address I have not had for over 4 years and will not accept my current authorization information.  How do I get it to accept my new computer

    After purchasing a new computer I downloaded itunes and signed in to my account.  Everything was fine including my current email address.  When I connected my iPod and it started to cink, I go a message that the computer had to be authorized our my music would be removed.  When I clicked on the authorize button I got a sign in that had an email address I have not had in almost 3 years.  When I put my current logon and password in itunes would not accept it.  When I clicked help it offered to send help to my old email address which I have not way of accessing.  How do I get my computer to accept my iPod if I cannot enter the current logon and password information?

    We are having this same issue.  We have over 200 songs that are now missing and only our most recent ones show up in our ITunes library.  Fortunately we have one phone that still has all of our music still in tact. This phone is no longer one I will be using as I upgraded to the Iphone 6, and only the most recent purchased songs remain.  The rest are no where to be found and the iTunes store shows that I would need to re-purchase.  Not sure what to do as when I tried to sync my last phone, all the songs were gone.

  • M1522 nf scanner is not working for windows 8.1

    till windows 7 scanner & printer is working.
    windows 8.1 scanner is not working.
    i tried all the softwares in page http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3442754&spf_p...
    please update your softwares that are not working for windows 8.1

    Hello Nani134,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet M1522nf is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

Maybe you are looking for