Printer start-up problem. HP Deskjet 2050 All-in-One J510 series. Part# CH350A

Whenever I first turn on printer it immediately prints a page and says I need to scan the page and realign it.  Also, the colors are somewhat faded looking.
This question was solved.
View Solution.

Hey RedDave,
If the unit is printing an alignment page on each start up, then the unit is failing to align.  If the unit fails to align, then it will attempt to do so on the next start up.  Do you get an alignment failed message on the computer screen?
I would advise following the steps in the document linked below to troubleshoot this condition in your Deskjet 2050 J510 series All-in-One.  
'Alignment Failed' Error Message Displays on the Computer
Let me know how it goes,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

  • I have a hp deskjet 2050 all-in-one j510 series printer wired it and ran cd still not printing what

    i have rechecked wires not sure what i did printer will not print please help

    Hi, Yesterday I bought the above printer and installed it on my Windows XP but when I click for the printer to print there is an error messsage that comed up bizsupport2.austinhp.. I have no idea what this means all I know is my printer is not printing
    Can someone please give me any help
    Thanks

  • HP Deskjet 2050 All in One J510 Series

    Had to install my printer again onto W7 (x64).
    The installation disk is a few years old now and whilst it still works,
    when l get the menu up, all it shows is "see what's printing", "set preferences",
    and "customize your printer".
    There is no mention of checking ink levels or to even do a scan.
    I know sometime ago l had to rebuild the system and someone posted a link to install
    an updated version of the menu.
    Any ideas?
    Regards
    This question was solved.
    View Solution.

    Hey,
    you may have to uninstall and reinstall the printer software and then add the printer.
    I recomend you to use the latest full feature which is available online Click Here
    Then follow the document below to set up the printer
    USB Setup > Follow method Two.
    Kevin_US_CA
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the left side of my post to say thanks!***

  • Printing problem with HP deskjet 3050 all in one J610 series

    I have a HP deskjet 3050 all in one J610 series which I am using with Windows Vista Version 6.0 (Build 6006: Service pack 2).  Connecting is by USB port.  I have not used the printer for some time, but have done all the maintence checks & it is good to go.  When I want to print a letter the only thing that gets printed is the email address which is coloured blue.  I think the problem is in the settings of the printer features.  I can print the letter in gray scale but this is not easy to read and not suitable for business dealings.
    I would appreciate help with this problem.  A definition of the terms used in the printer features might help me resolve it by my self.
    Thanks
    This question was solved.
    View Solution.

    Hello @Tellen,
    Thank  you for visiting the HP Support Forums! I understand you are running into some print quality problems with your HP Deskjet 3050. I see when you attempt to print a letter you will only see the email address and its in blue ink.
    First I would like you to click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    What does the PSDR find? If you are still not getting black text, please continue here: Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series
    If after the troubleshooting has been done and you are still seeing the issue leave me with the following information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. How is the printer connected, USB or Wireless?
    3. If you print a test page from the front panel do you see the same issue?
    I hope to hear from you soon.
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP DeskJet 1050 ALL-IN-ONE J410 series Printer Scanner stopped working suddenly

    About a month back Scanner in my printer-scanner (DeskJet 1050 All-In-One J410 series) stopped working with a message on screen " HP Deskjet 1050 J410 series was not found". But the Printer was working fine. I have so far taken following steps with results against each -
    a) HP Print & Scan doctor (HPPSdr.exe) showed HP Twain Scan faulty.
    b) On advice from HP helpline, tried HP Deskjet Full Feature Software & Drivers (DJ1050_J410_1313.exe). It required uninstalling before installing. But uninstalling failed to happen.
    c) Finally, with HP Printer Install Wizard (hppiw.exe) help it showed that Full Feature HP Software & Drivers is now installed. For its functionality, it called for its testing on 'print test page' and 'test scan'. After this, printer shows printing jobs in queue but will not print. At present it is limited to photocopying only without printing & scanning.
    d) I am caught in a loop, because at the end of hppiw.exe message is '...if tests are not successful, HP recommends using HPPSdr.exe to diagnose and fix any problem' i.e. back to point (a) above.
    Any solution to the above problem?

    Hi there @sukuma ,
    I can see that you have a thread open with @Futoji in regards to the issue however, no response. I would suggest completing his troubleshooting recommendations and reply back to continue the troubleshooting efforts. I hope that helps you!
    Here is the link to your other thread: Troubleshooting Thread
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • The HP Deskjet 3050A All-In-One J611 series printer I just bought is not compatible with my Mac Book Pro.  What do I need to do?

    I recently purchased an HP Deskjet 3050A All-In-One J611 series printer and it is not compatible with the version of the operating system on my mac book pro.  I am currently running on OS X 10.4.11 and the printer is compatible with v10.5 or higher.  What can I do to update the operating system on my Mac Book Pro? 

    10.5 will be harder to find & more expensive, I think I'd go for 10.6
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Apple no longer has it for sale.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

  • Deskjet 3050A all-in-one J611 series will not allow printing from desktop with windows 8

    Hello, I am trying to set up my fiances desktop to my HP DESKJET 3050A ALL-IN-ONE J611 series. It says it only supports other windows, windows 8 not being one of them. Both are wireless and I figured there has to be a way to download some software that I could install in order to hookup this computer. Please any help I could get would be appreciated.
    This question was solved.
    View Solution.

    Thank you very much, I really appreciate it. I will definitely do that. Thank you again for taking the time to help me. Take care and have a great day.
    Sincerely, Tabatha

  • HP DeskJet 3055A All-In-One Jobs Series margin

    Hi,
    I recently reinstalled Windows 7 on my laptop and ever since the top margin is too big and bottom margin too small.
    I haven't found a setting to correct this.
    The drivers are installed from the HP site and are the drivers for the HP DeskJet 3050A All-In-One J611 Series as suggested by the HP site. I ran all the HP Print and Scan doctor and the HP  Hardware Diagnose Progranm 4.1.
    Does anyone know who I can fix this problem coz this is very annoying:
    Everything I print a art of the bottom falls of th page and isn't printed?
    Thanks,
    Bas

    Hi @basf ,
    I understand that you are having issues with the top and bottom margins not printing properly. I will do my best to assist you with this issue.
    What application are you using?
    Check the page setup in the application you are printing from?
    Try another application to see if you have the same results.
    Here is a document for checking the paper size and paper type settings from the print driver.
    Changing Print Settings in Windows 8.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP DESKJET 3050A ALL-IN-ONE J611 series

    My friends.
    My problem is very simple.
    I have a printer "HP DESKJET 3050A ALL-IN-ONE J611 series" and she can not work properly on my laptop.
    I have windowns 8.1 as soy experienced all your drivers and the printer can not work well.
    Sometimes I can install it but the next day the computer can no longer print anything.
    And so before bedtime to trash this printer and choose another brand'm here to request v.ajuda.
    I would appreciate someone answer me for email
    [Personal Information Removed]
    greetings
    jose melo

    Hi @josedemelo , and welcome to the HP Forums!
    I understand you're experiencing print issues. I would like to help.
    Are you able to make a copy without issue?
    Are you connected via a USB cable or a wireless connection?
    I would recommend performing a power reset on your printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then suggest downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • How do i connect HP Deskjet 3050 All-in-One J610 Series to my Laptop

    I need help to connect my HP Deskjet 3050 All-in-One J610 Series to my Samsung Laptop, can any1 help pls

    Hi,
    What is the operating system on your Samsung ? How do you want to connect it ? The following link is for Windows drivers:
        http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4066452
    For Android, please use the following app:
       https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Which external fax modem is compatible with deskjet 3050 All-In-One j611 series

    I would like to use my HP DESKJET 3050 All-In-One j611 series printer to send and receive faxes. Which external fax modem do you recommend?

    Hi 1937, 
    The Deskjet 3050 j611 printer doesn't support faxing. If you need a printer with fax capabilities check out the following link below. 
    http://shopping2.hp.com/en_US/home-office/-/products/Printers/Printers?SearchParameter=%26%40QueryTe...
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Deskjet 3050A All-in-One J611 Series - getting exact driver to download

    I need to download a driver for my (per printer label) "HP Deskjet 3050A All-in-One J611 Series" -- but at hp.com, see listed only J611-Series models with postfixed abc letters "a" to "k" ... and one w/o a postfixed abc letter, but that lacks "J611" in its model name.
    Also, my printer label does not prefix "e-" to the printer name.
    Would the driver for  "J611-a" work with my printer?
    Or the driver for "HP Deskjet 3050A All-in-One" that lacks "J611"?
    Thank you.

    I need to get the printer going

  • How do I change my HP Deskjet 3050A All-In-One J611 Series to draft mode

    How do I change my HP Deskjet 3050A All-In-One J611 Series to draft mode?  I have read some of the "solutions," but they don't make any sense to me.  I need simple instructions.  Thanks!

    Hi there!
    Try these steps that I have posted below. This will change the settings for all print jobs, so you will need to go back in to these settings if you wish to change the quality back to normal, best, etc.
    Source
    Once you are in the Printing Preferences window, you will see a Paper/Quality tab, click on it and you can change the Quality to Draft here.
    That should work for you! Let me know if this helps
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Why can't I sign up to eprint? HP Deskjet 3050 All in one J611 series

    Website will not let me register my HP Deskjet 3050 All in one J611 series for e-print

    http://support.apple.com/kb/DL907

  • HP Deskjet 3050A ALL-IN-ONE J611 series ---- mac filtering problem

    i have a HP Deskjet 3050A ALL-IN-ONE J611 and i cannot get my printer to connect wireless. Everytime I try to connect it it always tells me an error. The error says:
    Issue: MAC address filtering may be enabled on your wireless router.
    Solution: If MAC address filtering is enabled on your router you should disable it.
    The thing is i checked my router to make sure the MAC filtering was not enabled and it wasn't. So why does my printer keep telling me this? if i can get passed this problem i think it would connect. The MAC address is already stored in the router.
    [edited image by Moderator]

    Hi skhjr,
    Welcome to the HP Forums.
    I see that you are having an issue getting the printer to connect over the wireless network.
    So I can better assist you, please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Please write me back when you have time and I will be happy to help.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for

  • Warning/Error Message for Tax Code Mismatch between PO and Invoice

    Hi Experts Is there any SAP standard warning/ error message thrown when the User changes the tax code in the invoice which does not match the default tax code of the PO? The client would like to identify a 'tax code variance'. If no, is there anyway

  • Configuring WLDF to recieve email Alerts in Case of Out of Memory Errors

    Hi All, I need help regarding configuring WLDF to receive email notifications in case there us an outofmemory or any other critical failure in the logs. I followed the documentation but i am not able to get it right. Do i need to write a seperate mai

  • PULL IN FULL ITEM TEXT WHEN CREATING A ME51N TRANSACTION

    Hi ALL: We want to create non-stock items from a catalog system into SAP using "JAVA". The moment we pull in the items detail from the catalog, it only imports the items "short text" but do not populate the ITEMS LONG TEXT (MM-DETAILED TEXT) as well.

  • Using bullets in forms central

    How do you insert a bullet or bullets on the online forms?  I am not seeing how to insert it on an online registration form I am trying to create.  Thanks for any help!

  • Issue with PDFMaker Acorbat 10.1.8

    I'm trying to right click convert to PDF .docx documents. I conintue to get an error. An unexpected error occurred. PDFmaker is unable to produce the Adobe PDF. I'm using Office 2010 x32 SP2. It is running Windows 7 x64 SP1. If I can get help It woul