Printer stopped working from mac

my 6515 stopped responding to printing from my mac. print job seems to run but only blank pages come out. copy and scan seem to work. Reinstalled print driver to no avail.

The document here may help resolve the issue. Be sure to check the vents as shown in solution two.
Is your printer still in warranty? You can check with HP's warranty tool here. What country are you located in?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

HP Photosmart D5360 Printer stopped working with MAC once upgrade to SL?

We have a networked (not wireless printer) HP Photosmart D5360 Printer, and it connected to a Windows PC, Under Leopard we were able to print via Network sharing the printer, however since we have updated to Snow Leopard we can no longer see or print to the printer... Even though all the Windows computers (PC's) can see it and print. Nothing has changed on the network, it just simply isn't being seen by SL on our Mac's anymore...
We can see the workgroup and the computer, but it says it can't connect to the computer (a windows PC) anymore for some reason when while using Leopard we had no issues...
Suggestions? Obviously an easy fix would be to get an Airport Express adapter and plug the printer in that way thus making it a wireless printer, however we would like to get it work without spending the $100 for the Airport Express if possible.

NASCAR3D,
I don't know if this will help, but if it doesn't we'll work through the issues.
Step 1: Make sure the printer drivers on your Windows box are up to date. This step is important, since a driver mismatch could be the cause of your problem.
Step 2: Open the Print & Fax System Preference, right click on your printer, and select "Reset printing system..."
Step 3: Click the + button an the bottom of the now empty list, when the add printer window opens up, press the Windows button in the toolbar. Select your printer, and make sure the Print Using is NOT set to Generic PostScript. It should auto select your printer from the list. If not, make sure you pick it manually.
If it still doesn't work let me know and we'll see what we can do.
Just trying to help.
Andrew

After connecting google cloud my printer stopped working from any location

I.hear the aforementioned issue is not new. What do I have to do to my other Pc,Windows XP, Firefox and Google chrome Cloud to get it to work.
It even stopped printing from the PC alone. Windows xp Firefox,Google, Google Chrome.
I even reinserted the operating disc it came with and still nothing
It was working fine right out of the box a month ago, then I wanted to try the remtoe feature throgh my router using google Chrome.
Bad decision!
[Personal Information Removed]

Running lsusb gives me this:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 03f0:2b17 Hewlett-Packard LaserJet 1020
Bus 001 Device 004: ID 13d3:5119 IMC Networks
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

My Mac desktop went offline and printer stopped working

My Mac desktop went offline and printer stopped working. I have attempted everything I can do, without luck. When I attempt to reset my belkin router, the mac will not accept my password. My PC, set up 3" away, is online. HELP

It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Printer Stopped Working

We are running OS X Server 10.3.9. We connect VPNs to our office and have a mix of Mac & WinXP Computers. We setup an HP Bus Inkjet 2800 off of the USB port of the Server. We then started Print Services on the OS X Server. For the Queue we used all of the protocols to share (AT/LPR/SMB). All went well to start, winXP over the VPN and in the office printed ok. Out of the blue we can no longer print from WinXP machines. Coincidentally perhaps, the first time a Mac printed over the VPN, with success, we could no longer print from WinXP. Have not been able to get it going again. Restarted print services and the server itself w/no luck. Deleted and re-added printer...still no luck.
The Log reflects a couple of "Issues". The errors shown are:
"No Printcap File Name configured!"
"registermessage_flags:tdbfetch failed"
I'm hoping someone can provide some insight, I'm dying here! :o)
Acktom

Acktom -
A few questions... Our printer stopped working out of the blue. We completely reloaded the server tonight and they still do not work.
My question to you: Did they stop working after you applied a system update. Ours did.
Lastly, do you get a message like lpr: clientconnectionfailure in the Windows service log, Print Services ( I think I have it right)? We get this error. then we check /etc/cups/printers.conf and find the name of the printer is spelled differently. HP LaserJet 5Si vs HPLaserjet5Si
I think our problem stems from spacing. But our server worked for about 2 years without any real changes. We have traced it back to that system update. For this reason, we completely reloaded the server to try to resolve it. We applied updates after the server was reloaded thinking this was a positive thing. But really, we have the same problem -- no printing from Windows XP clients.
Our next step is to rename the Appletalk name of the HP Laserjet so there are no spaces in the name.
I also have found that when we add a printer with an address of 192.168.0.51, that is now the queue name for the printer. Where we have a queue specified as HPLaserJet5Si. I think apple has created some problems here. But we have no support contact and cannot afford their support arrangments. So we are trying and not having much luck.

File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
Thanks

I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

Acrobat printer stops working

I am seeing a problem where the Acrobat virtual printer stops working after my system has been running for a while. The symptom is that when printing to the virtual printer, the file appears in the queue, then disappears as if it was successfully printed, but Acrobat never starts up and no PDF is produced. I've tried killing the Acrobat background processes and restarting them but this does not solve the problem. The only solution I've found to work is a system reboot, after which the virtual printer functions correctly for a while but eventually stops working again.
System: Win7Pro 64; core i7 930; 12GB memory; lots of free disk space

I did the following
Ctrl-P to print a page in Firefox
Click Properties...
Select the "Adobe PDF Settings" tab
Change the output from "Prompt for Adobe PDF Filename..." to a specific output folder
At which point the file is printed correctly to the designated folder.
I didn't have to invoke distiller separately
Does this still indicate a problem with Acrotray?

Epson printer stopped working after yosemite

All of a sudden, after Apple autoupdate installed yosemite update and new epson drivers, my printer will only print first line of a document.
I've tried deleting and reinstalling printer, repairing and verifying drive, deleting printer library files, unplugging, rebooting... nothing is working. Does anyone have a solution for me? Help!

My Epson WF-4360 "lost it's mind" after being accidentally unplugged for most of a day.
The printer DID work from Yosemite both before and after the "loss of power"
The printer DID work from iOS before the loss of power ... but stopped working after that
ALL the printer status reported to be fine -- showed the wi-fi network address and connection ... but was NOT discoverable from iOS
This fix resolved the issue:
Find the wi-fi IP address of the printer -- either from the printer or the network (mine was a local IP ... 10.0.1.n)
Go to Safari on the iOS device -- enter the IP address of the printer
Scroll down to the BASIC SETTINGS on the left side menu
Scroll down to the AirPrint Setup button ... click to start
Click OK -- to advance through the menus ... two separate browser pages for me
You will see AirPrint "Setup Complete"
From iOS ... the printer is now discoverable.

Adobe Pdf Printer stopped working after update to Acrobat DC

Hello, I have installed Acrobat DC yesterday. Since then, Adobe Pdf Printer stopped working. It always gets stuck at Checking Fonts and any software the print originated from just hangs and I have to force it closed.
I tried uninstalling the printer and installing it manually, repairing Acrobat installation but nothing changed.
So, can somebody help me? Thanks.

A method which is written here not working - because if you start to remove the fonts one by other you will see that the list does not end there.
I did so
1. i copied the folder with the fonts from the other clean system and replace with fonts in my system
2. then i restore the registry tree HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts
3. i check system with sfc /scannow
after these procedures Distiller DC continue to crash...
In this time distiller crashed when it cheking their fonts in C:\Program Files(x86)\Adobe\Acrobat DC\Resources\Font
after i rename the folder from Font to Font_ in order to he did not check this folder
at next run Distiller crashed at the font wingding.ttf after remowing that font he crash at Vrinda.ttf (this is a oficial font of Win7 and come with him) after removing that font distiller crash at the next font name of Vani.ttf (this is a Win7 font too) - when i saw it goes on forever i back my system to normal status and uninstal Acrobat DC and back to Acrobat XI...this version work with out any problems.
We are waiting a hotfix to resolving this problem with Acrobat DC

HT201412 Iphone 4S screen stops working from time to time

Iphone 4S screen stops working from time to time.
sometimes for a few seconds, or sometimes many hours.
I've resetted it when this happens, with no luck.
I've restored it from back up, and the problem still persists.
What can i do?

Hello,
I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
THAT was not an option!
BUT it seems to solve my problem in the following way after trying a lot of possibilties:
In the menue properties/help (don't know the exact english word, because I run my phone in german)
I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
Today the flash feature was responding to different push notes very slowly.
By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
the problem appeared. Switching the LED-flash off: problem disappeared!
It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
treated my phone very hard today to double check, but its still ok.
@Apple:
Please fix that issue in the next update.
Hope, this helps you guys as well.

Hp smart web printing stopped working in ie 8...is there a fix?

using Hp G71 lap top...window 7 64-bit HP smart web printing stopped working
I use IE 8 ...I tried IE9 and the Updated HPSWP and it failed as well
why is your software no longer functional.

same problem here. worked for a while on two of my computers, and then stopped working. windows 7 64 bit ie 9.0.12

Printing only works from one computer

I have an Epson Stylus C60 connected to the USB port on my Airport Extreme. There are two computers on the network, a PowerBook G4 and a MacBook Pro. Both computers connect to the network very reliably and have internet access. The problem is that the MBP cannot print to the connected printer. The G4 has always printed fine.
The MBP sees the printer as a Bonjour printer, and I can add it to the printer list without problem. When I try to print, I get a message in the print queue that there is a communications error with the printer.
In the airport configuration window, the printer is recognized and remote printing is enabled. Any idea why printing only works from the G4?

Thanks for your help. Yes, the driver is a universal binary and the printer works great when plugged directly into the computer. I just can't figure out why it won't work over the airport.
Any other ideas?

Grab stopped working on mac 10.6.8 - cant find library/preferences, it is no longer in utilities - only the icon remains unuseable in the dock.

Grab stopped working on mac 10.6.8 - cant find library/preferences, it is no longer in utilities - only the icon remains unuseable in the dock. Can anyone help?

Folks- I got After Effects to launch by installing OS X 10.8. I did not figure out the problem and am not certain it won't pop up again.

Printer Stopped Working - Driver Won't Install

My printer stopped working, and I have been trying to reinstall the printer driver, but the computer keeps saying that I need "Administrator privileges" to install it, though I AM the administrator for this computer.
Any suggestions?

Go to Disk Utility and repair the permissions for the computer. Takes a while though, so go get a cup of coffee or something.

PSE 13 solves "Error: Licensing has stopped working" on MAC OS X 10.10.2?

After some years using my reliable PS8 I've got this nasty message and I am unable to work since then.
I've been working on solving the "Error: Licensing has stopped working" on MAC OS X 10.10.2 for a while without success.
Does PSE 13 solves the problem? I just want to be sure that if I buy the new version it is going to work or if I am going to lose another US$ 99 on a piece of software that requires more "MAC OS X" expertise than I have.
Any help, clue or piece of advice is welcome.

Thank you, but it is exactly the paper I've been trying to follow.... I can't go through solution 2 because I got an error when using “sudo python “.
After trying for some days I am thinking about buying the newest version (PSE 13), I just want to be sure I am not going to have the same error.... ;-)

Printer stopped working from mac

Similar Messages

Maybe you are looking for