Printer stuck in spooling after first print

Hello,
I have a new laptop in the office with an HP ColorLaserJet CM2320nf MFP printer connected to our network.
The drivers installed without issue. After every reboot, the first document I choose to print will print fine from any program.
Then any subsequent print from *any* program I try to make will get stuck in 'spooling', and even crash the program I'm in.
I've tried a completely clean install of the drivers and the reinstall produced the exact same results.
Is this a known issue and what are some suggestions to fix?
Running Windows 7 Professional 32 Bit
Many thanks in advance

When in the dock, right-click the printer icon and choose Auto Quit.
Joe

Similar Messages

Battery indicator stuck at 96% after first load

Hey,
I just bought MBP 13" mid 2012 (MD101D/A). I unboxed it, started it without pluggin in and used it for a while. Then, at some point, I plugged it in and let it just load throughout the night. When I started to actually set it up today, I noticed that the battery indicator shows 96% BUT when you click on it, it says that it's fully loaded. Now I checked coconutbattery and this is what I get:
It lost already 3% after the first loadcycle? I'm afraid the battery may be damaged....
Would love any kind of suggesten what to do with this.
Cheers

Your battery is fine.......You probably didn't notice it when it reached 100% - charger will automatically stop charging when you reach 100% to avoid overcharging your battery.
Once your battery goes down to 95% - charging resumes.

Iomega Storcenter ix4-300d stuck at 95% after firmware upgrade

Hi,
I upgraded my device after I got an email that there is a new firmware:
An update to version 3.2.10.30101 of the Iomega StorCenter ix4-200d software is now available
I installed the update but now it is stuck at 95% after rebooting.
Never had any problem before the firmware upgrade.
Any advice?

Hello BelgianTomas
I recommend that you first power down the unit if the unit has not completed the boot process. Then re-seat all disks and try booting the unit again. Please do not try to access the web interface until the power led is solid white.
Next would be to try moving the internal disks to different bays to see if a different drive order wil allow the unit to boot.
If that does not help, LenovoEMC suppor should be contacted for more advanced options.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Mail app freezes after first use on iPad 3 and ios 8.1. How to solve?

Apple mail app freezes after first use after reset. iPad 3 and IOS 8.1. How do resolve?

Hi, sixfinger.
Thank you for visiting Apple Support Communities.
Try forcing all applications to close and restart the device. Once this is done test to see if the Mail app functions correctly.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Cheers,
Jason H.

Alv show in report but when see in spool (after run background job) there i

my program have some error when i run result alv show in report but when see in spool (after run background job) there is no data, (other program can see result in spool)
Please help
here is some example of my program
********************************declare internal table*****************************
internal table output for BDC
data : begin of t_output occurs 0,
bukrs type anla-bukrs,
anln1 type anla-anln1,
anln2 type anla-anln2,
zugdt type anla-zugdt,
result(70) type c,
end of t_output.
*****get data from loop********************************
loop at t_anla.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_anla-anln1
         IMPORTING
              OUTPUT = t_anla-anln1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_anla-anln2
         IMPORTING
              OUTPUT = t_anla-anln2.
check record is correct or not
    select single bukrs anln1 anln2 zugdt
    into w_output
    from anla
    where bukrs = t_anla-bukrs and
    anln1 = t_anla-anln1 and
    anln2 = t_anla-anln2
   zugdt = '00000000'
if record is correct
    if sy-subrc = 0 and w_output-zugdt = '00000000'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Yes : this asset can delete'.
      append w_output to t_output.
if record is not correct
    elseif sy-subrc = 0 and w_output-zugdt <> '00000000'.
there is error record this asset have value already
      v_have_error = 'X'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Error : this asset have value already'.
      append w_output to t_output.
    else.
there is error record this asset donot exist in table anla
      v_have_error = 'X'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Error : this asset doest not exist'.
      append w_output to t_output.
    endif.
*end of check record is correct or not
    clear w_output.
endloop.
******************************show data in ALV***************************************************
show data from file in ALV
perform display_report_ALV.
*&      Form display_report_ALV
form display_report_ALV.
DATA: LT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
      LT_EVENTS TYPE SLIS_T_EVENT,
      LV_REPID LIKE SY-REPID.
PERFORM ALV_DEFINE_FIELD_CAT USING LT_FIELD_CAT.
PERFORM ALV_HEADER_BUILD USING T_LIST_TOP_OF_PAGE[].
PERFORM ALV_EVENTTAB_BUILD USING LT_EVENTS[].
LV_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM = LV_REPID
            IT_FIELDCAT        = LT_FIELD_CAT
            I_SAVE             = 'A'
            IT_EVENTS          = LT_EVENTS[]
       TABLES
            T_OUTTAB           = t_output
       EXCEPTIONS
            PROGRAM_ERROR      = 1
            OTHERS             = 2.
IF SY-SUBRC NE 0.
    WRITE: / 'Return Code : ', SY-SUBRC,
      'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
endform.
*&      Form alv_define_field_cat
      text
     -->P_LT_FIELD_CAT text
FORM ALV_DEFINE_FIELD_CAT USING TB_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: WA_FIELDCAT LIKE LINE OF TB_FCAT,
    LV_COL_POS TYPE I.
DEFINE FIELD_CAT.
    CLEAR WA_FIELDCAT.
    ADD 1 TO LV_COL_POS.
    WA_FIELDCAT-FIELDNAME = &1.
    WA_FIELDCAT-REF_TABNAME = &2.
    WA_FIELDCAT-COL_POS = LV_COL_POS.
    WA_FIELDCAT-KEY = &3.
    WA_FIELDCAT-NO_OUT = &4.
    WA_FIELDCAT-REF_FIELDNAME = &5.
    WA_FIELDCAT-DDICTXT = 'M'.
    IF NOT &6 IS INITIAL.
      WA_FIELDCAT-SELTEXT_L = &6.
      WA_FIELDCAT-SELTEXT_M = &6.
      WA_FIELDCAT-SELTEXT_S = &6.
    ENDIF.
    WA_FIELDCAT-DO_SUM = &7.
    WA_FIELDCAT-OUTPUTLEN = &8.
    APPEND WA_FIELDCAT TO TB_FCAT.
END-OF-DEFINITION.
FIELD_CAT 'BUKRS' 'ANLA'     'X' '' 'BUKRS' 'Company Code' '' ''.
FIELD_CAT 'ANLN1' 'ANLA'     'X' '' 'ANLN1' 'Asset Number' '' ''.
FIELD_CAT 'ANLN2' 'ANLA'     'X' '' 'ANLN2' 'Asset Sub Number' '' ''.
FIELD_CAT 'ATEXT'   'T5EAE'     'X' '' 'ATEXT' 'Result' '' ''.
FIELD_CAT 'RESULT' ''     'X' '' 'RESULT' 'RESULT' '' ''.
ENDFORM.                    " alv_define_field_cat

Hi,
Check this code..
FORM display_report_alv.
DATA: lt_field_cat TYPE slis_t_fieldcat_alv,
lt_events TYPE slis_t_event,
lv_repid LIKE sy-repid.
PERFORM alv_define_field_cat USING lt_field_cat.
PERFORM alv_header_build USING t_list_top_of_page[].
PERFORM alv_eventtab_build USING lt_events[].
lv_repid = sy-repid.
IF sy-batch EQ 'X'. ----> " System Field for Backgroud..if Background use list display
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program = lv_repid
        it_fieldcat        = lt_field_cat
        i_save             = 'A'
        it_events          = lt_events[]
      TABLES
        t_outtab           = t_output
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
ELSE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program = lv_repid
        it_fieldcat        = lt_field_cat
        i_save             = 'A'
        it_events          = lt_events[]
      TABLES
        t_outtab           = t_output
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
ENDIF.
IF sy-subrc NE 0.
    WRITE: / 'Return Code : ', sy-subrc,
    'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
ENDFORM.                    "display_report_ALV

I have change e-mail address after first registration and when I logged in it send new password to my old e-mail address. now I can't use my old profile

I have change e-mail address after first registration and when I logged in it send new password to my old e-mail address. now I can't use my old profile.
and I can't install my old adobe X anymore
what to do?
Mika

Change Account https://forums.adobe.com/thread/1465499 may help
-wrong email https://forums.adobe.com/thread/1446019

IMac OS 10.9.4 software updates apparent cause of Corel Painter X3 crash: I have run Disk Utility - no probs there, reinstalled Painter X3 (after first uninstalling X3). What now?

iMac 10.9.4 software updates last week is apparent cause of my Corel Painter X3 now crashing. I ran Disk Utility check - no probs there. I reinstalled Painter X3 (after first uninstalling X3), still no success. Online Mac support suggest I use MacCleaner - tried at online Mac store & was referred to 0800 tech support for guidance - still waiting for reply.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Messages stuck in updating after Yosemite install

Messages stuck in updating after Yosemite install. Tried re-install of Yosemite and quit messages, still unable to access.

Hi,
Go to the ~/Library/Attachments folder. (well it should be a folder).
If it is not a Folder then rename it and create a New folder with the same name.
restart Messages.
Or if you have a Time Machine backup replace the Non folder item with an Original from just before the update.
9:22 pm Saturday; January 17, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to stop after first loop operation over?

Hi friends.
How to stop after first loop operation over?
I have a loop operation in module pool program.
After first loop over I want to stop.
I used the STOP keyword, but it is going to dump.
Thanking you.
Regards,
Subash

Hey,
The statement STOP is forbidden in methods and, since release 6.10, leads to an uncatchable expection during the processing of screens called with CALL SCREEN...
As they said above, use a EXIT statement to fix this DUMP...
Regards,
Diogo Carvalho

User change password after first logging in Oracle 11g

Hi
Can you help someone in connection with this problem:
user can not change password after first logging in Oracle 11g
All the best
Ragip Avdijaj

Sounds like they are not getting logged in at all, so they are never getting to the point where they can change the password, but we need to see more detail to give a better answer (an example or copy-paste of a sqlplus session might help)

After first installation iweb will not start

After first installation iweb will not start Problem message pops up:
Die Datei „/Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery“ kann nicht geöffnet werden.(can not open file butterfly.mailstationary)
any tips?
Thanks

If you are trying to launch iWeb '09 with a domain file made in iWeb '08, drag the domain file out of Home Folder/Library/Application Support/iWeb into a new folder and then try launching.

HT1766 my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?

my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?

Hello, fschris.
Thank you for visiting Apple Support Communities.
When experiencing issues updating or restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

All browser run can access javascript objects in iframe but in firfox you can not do that after first refresh

1- I have a DIV tag in html page
2- Load dynamically an IFrame into that DIV
3- suppose that I have a JS function in that IFrame with name "func".
4- after first loading IFrame in DIV I can access "func"
5- but after reloading another IFrame into DIV I can access "func" in all browser IE,Chrome,Opera but I can not do this in FireFox

Hello,
Thank you for using the Troubleshooter extension. It seems you use Kasperskey - first see if this post helps you fix the problem:
* https://support.mozilla.org/en-US/questions/1026631#answer-650916
You can also check the article [["This Connection is Untrusted" error message appears - What to do]] as it provides common troubleshooting steps.
Let us know if that solves your problem!

Hi, coding to display popup window after first alv grid display

hi
can anybody please send coding to display popup window after first alv grid display i.e. first the prog shows grid display and from grid display the user select the field and on the basis of field value i need to show pop up window in the first secondary window and then third popup window.
thanx
rocky

Hi rocky,
here is the sample code .hope this helps you.
TYPE-POOLS : SLIS.
DATA : GT_OUTTAB TYPE VBAK OCCURS 0,
       GS_PRIVATE TYPE SLIS_DATA_CALLER_EXIT,
       GS_SELFIELD TYPE SLIS_SELFIELD.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA : ITAB TYPE TABLE OF SLIS_SELFIELD,
       WA_ITAB LIKE LINE OF ITAB.
START-OF-SELECTION.
PERFORM POPULATE_GT_OUTTAB.
PERFORM GET_POPUP.
PERFORM POPULATE_ITAB.
PERFORM FIELDCAT.
PERFORM DISPLAY_DETAILS.
*&      Form FIELDCAT
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
LOOP AT ITAB INTO WA_ITAB.
WA_FIELDCAT-FIELDNAME = 'TABINDEX'.
WA_FIELDCAT-TABNAME = 'WA_ITAB'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-SELTEXT_L = 'TABLE INDEX'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'SEL_TAB_FIELD'.
WA_FIELDCAT-TABNAME = 'WA_ITAB'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 20.
WA_FIELDCAT-SELTEXT_L = 'FIELD NAME'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'VALUE'.
WA_FIELDCAT-TABNAME = 'WA_ITAB'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-SELTEXT_L = 'FIELD VALUE'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
ENDLOOP.
ENDFORM.                    " FIELDCAT
*&      Form POPULATE_GT_OUTTAB
      text
--> p1        text
<-- p2        text
FORM POPULATE_GT_OUTTAB .
SELECT * FROM VBAK
       UP TO 10 ROWS
       INTO TABLE GT_OUTTAB.
ENDFORM.                    " POPULATE_GT_OUTTAB
*&      Form GET_POPUP
      text
--> p1        text
<-- p2        text
FORM GET_POPUP .
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
   I_TITLE                       = 'SALES ORDER'
I_SELECTION                   = 'X'
I_ALLOW_NO_SELECTION          =
   I_ZEBRA                       = 'X'
I_SCREEN_START_COLUMN         = 0
I_SCREEN_START_LINE           = 0
I_SCREEN_END_COLUMN           = 0
I_SCREEN_END_LINE             = 0
I_CHECKBOX_FIELDNAME          =
I_LINEMARK_FIELDNAME          =
I_SCROLL_TO_SEL_LINE          = 'X'
    I_TABNAME                     = 'SALES ORDER'
    I_STRUCTURE_NAME              = 'VBAK'
IT_FIELDCAT                   =
IT_EXCLUDING                  =
I_CALLBACK_PROGRAM            =
I_CALLBACK_USER_COMMAND       =
   IS_PRIVATE                    = GS_PRIVATE
IMPORTING
   ES_SELFIELD                   = GS_SELFIELD
E_EXIT                        = G_EXIT
TABLES
    T_OUTTAB                      = GT_OUTTAB
EXCEPTIONS
   PROGRAM_ERROR                 = 1
   OTHERS                        = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " GET_POPUP
*&      Form POPULATE_ITAB
      text
--> p1        text
<-- p2        text
FORM POPULATE_ITAB .
WA_ITAB-TABNAME = GS_SELFIELD-TABNAME.
WA_ITAB-TABINDEX = GS_SELFIELD-TABINDEX.
WA_ITAB-SEL_TAB_FIELD = GS_SELFIELD-SEL_TAB_FIELD.
WA_ITAB-VALUE = GS_SELFIELD-VALUE.
APPEND WA_ITAB TO ITAB.
ENDFORM.                    " POPULATE_ITAB
*&      Form DISPLAY_DETAILS
      text
--> p1        text
<-- p2        text
FORM DISPLAY_DETAILS .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = ' '
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
   IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    T_OUTTAB                       = ITAB
EXCEPTIONS
   PROGRAM_ERROR                  = 1
   OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_DETAILS
award points if helpful.
regards,
deepthi reddy

Adobe Reader IE plugin (11.0.04 - .06) is automatically deleted after first restart

Hi all
I have discovered a strange bug (as I like to call it). Since Adobe Reader version 11.0.04 (now we have 11.0.06) there is problem with IE plugin.
When I install it - everything is working and from IE I can succesfully open pdf files. But when I restart computer after Adobe Reader installation, all plugin files are missing (like they are automatically deleted) from C:\Program Files (x86)\Common Files\Adobe\Acrobat\ActiveX folder. And ofcourse IE plugin is not working any more.
Workaround is when AFTER first computer restart I manually copy all plugin files to that folder or repair Adobe Reader installation - then files are not being deleted any more. As I said, it is very strange problem.
However this workaround is not acceptable to me because I have lots of computers where I need this software to be installed.
Have anybody seen this problem and know how to fix this? Other browser (firefox, chrome) plugins are working correctly after fist restart. This problem is with Windows 8.1 / IE11 and Windows 7 / IE9
In Adobe Reader version 11.0.03 everything is working and after first restart plugin is not being automatically deleted.

Hi
No, it's not an antivirus software, because same thing happens in clean windows 7 system (without any antivirus or other specific software). And like I said, it started with version 11.0.04 - earlier versions are OK.
Also not only IE plugin files are gone after first restart but also Adobe Reader shortcut in Start Menu. Adobe Reader itself is working.
After first restart and repairing Adobe Reader installation - these files are not being deleted any more. It is not helping if I do repair after installation and before first restart. The thing is, only first restart after installation always deletes these files.
I looked everywhere in Windows (registry, startup, scheduled tasks) where might be some clue what is deleteing these files - didn't find anything.

Printer stuck in spooling after first print

Similar Messages

Maybe you are looking for