Printer suddenly started printing blurry and double vision like

Printer suddenly started printing blurry and double vision like. I have cleaned all i can and aligned the printer heads muliple times, but no difference

I did a quick search and came across this. Although it is for a 432, hopefully this imformation helps as canon printers are assembled relatively simular.
http://forums.usa.canon.com/t5/Printer-Multifunction-Support/I-had-a-paper-jam-on-my-MX432-and-since...
MY EQUIPMENT:
EOS Rebel T4i
EF-S 18-55mm f/3.5-5.6 IS II
EF-S 55-250mm f/4-5.6 IS II
(2) B+W 5.8 010 UV - Haze 1x MRC (F - PRO Series filter)
HOYA 58mm HMC Multi-Coated ND8 Filter

Similar Messages

HP Officejet 4355 Printer suddenly start printing very slow! HP technician advice needed!

Hi,
My HP Officejet 4355 All-in-One Printer suddenly start printing very very slow! I've had it for 4+ years and by God it never ever gave me any problems (maybe minor once, but never actually drove me crazy), considering that i used it very often at home and in the office. I always buy original HP ink cartridge (except that once, when i wanted to see how the refill works - it doesn't), and now latest cartridge has been in the printer for a month or two, nothing unusual, and suddenly my printer starts to print very very slow, if normally it took 10-15 sec for a black and white page, now it take 10-15 minutes! Could anybody suggest help?
Please do not talk about computer/Windows/USB settings, they all work fine. I disconnected printer from PC and did "Align Print Cartridge". First step, the printed part, took 10 minutes, second step, scanning part, did not go through. It said printer can't allocate aligning page...
By the way, i did look around for the answers and found that some people say it's a ink cartridge fault. But i used this cartridge for a few months now, it's almost, but not yet finished, it was printing perfectly so far. Printouts during this issue come out OK, 7 out of 10.
Anybody have any ideas? If I could attract professional help of HP technicians, it would be perfect.
Thank you.
© RedStarLimitless ©
This question was solved.
View Solution.

Even though they still have ink a cartridge may fail and give the results you are seeing, where the printer makes a swath and then waits 10-15 seconds for the next swath. This is caused by the failure of one of your cartridges. Removing each cartridge and cleaning the contacts on the cartridge and printer may resolve the issue.
I do not recall if the Officejet 4355 supports reserve mode, but try the following: Remove the black cartridge and print a test page. Does the printer print at normal speed? Is so the black cartridge was the issue and should be replaced. If not then put the black cartridge back in and remove the color cartridge and print test page. If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My machine has suddenly started printing just a few odd parts of documents

my psc 1215 has suddenly started printing only a few selected parts of a documents , both from pc and internet. can you help?
I have already re-installed it but that has made no difference.

I have resolved my own problem.
It was, View," Headers", that had been set to, "All".
I have set to, Normal", and the problem has disappeared.
Regards,
Robin Pearn,

My iMac all of the sudden started going in and out of the dashboard, then started changing all files on the desktop to 2's. It also did this when having another window open. Do I have a virus?

My iMac all of the sudden started going in and out of the dashboard, then started changing all files on the desktop to 2's. It also did this when having another window open. Do I have a virus?

There are no viruses that can affect Apple OS X.
What files do you keep on the Desktop? How many?
Performance tip: Keep the Desktop clutter-free (empty, if possible)
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks' for Leopard.
Here is Apple's take on the subject:
http://www.apple.com/pro/tips/immaculate_desktop.html

I can browse the web but when I go to play video or you tube it will start stop over and over almost like it is buffering could this be the router all other non iPad devices work

I can browse the web but when I go to play video or you tube it will start stop over and over almost like it is buffering could this be the router all other non iPad devices work

How are you trying to play them, in the iTunes store or the Music and Videos apps ? Downloaded and synced music and videos should be in the Music and Videos apps, and you can stop content that is only in the cloud from showing in them via Settings > iTunes & App Store > Music and Videos 'off' (under the 'show all' heading).
If you don't have your music and films/TV shows in those two apps then you should be able to download them into those apps via the Purchased tab in the iTunes store app.

The first 7 or 8 letters of a sentence are jumbled as I type. This happens only after a period of inactivity. Short or long. I start to type and a word like 'anybody', looks like this: 'ybodyan' I have done all the normal fixes. No luck. Ideas? Thx

The first 7 or 8 letters of a sentence are jumbled as I type. This happens only after a period of inactivity. Short or long. I start to type and a word like 'anybody', looks like this: 'ybodyan' I have done all the normal fixes. No luck. Ideas? Thx

It's in every text-input app I use in my normal day.....most frustrating as you have to do a doublecheck especially in documents which do not have any special spellcheck system. I've done the cleanmymac, maintenance, cocktail, PRAM reset, Font Cache Smash fixes.....and still I'm dogged by this. Its almost as though the motherboard or some interface system is 'sleeping' longer than it should (if there are any input areas of the MBP which rest during short periods of inactivity) and then the initial keystrokes on the keyboard are somehow not registered and only 'kick in' once half of a new word's characters are already on the screen........grrrrr.

MG7120 suddenly started printing light

Printer MG 7120 started printing light. I've tried everything but shaking the computer and printer. Any suggestions?

Hi Gawest,
When inks do not print correclty, we recommend performing at least one cleaning and two deep cleanings on the printer to see if this will resolve the issue. If you have already done this, please reply with the following information so we can further troubleshoot the issue:
1. What operating system is on your computer (Windows XP, Vista, 7, 8 or a version of Mac OS X)?
2. If you take a known good image and make a photocopy of it directly from the printer, do you experience the same issue?
3. Has a print head alignment (manual or automatic) been performed on the printer?
We look forward to hearing from you!
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can't get printer to start printing

There seems to be a lot of printing issues here. Mine is this: I have a Tally Genicom 8008 which Leopard seems to be able to see as it appears in my printer list. Plus, when I click Print in an application the document appears in the print queue. The problem i am having is that the Status in the Print Queue always says Stopped and nothing prints.
The printer is on and ready, and the print queue says 'Printer Ready' and I've tried clicking Resume but nothing... nothing seems to go to the printer. Any ideas?

According to Tally's website, there is a 10.4 driver for this printer, but there doesn't seem to be one for 10.5. Have you contacted them? Is there anything in Console that might be helpful?

Playback in audition suddenly starting to skip and stutter?

I'm using a us 122l and have had no issues with it all, even after somebody accidentally dropped a glass of water onto it a few months back. But last night when I was recording a song, just like I have been for the past year and a half, the program started to skip and stutter while I was moving along the multi track view. Then after about twenty minutes, audition would play one second of the song before crackling out into silence. I changed the US122's latency to it's worst quality and it helped a little, and the same when I use ASIO4ALL, but the program is still unusable.
I haven't made any changes to my computer, no new audio cards or anything, it's exactly the same as it has been since I started recording with it. It wasn't even an stressful track for the computer, it was only three tracks running simultaneously.
P.S, I'm using Vista, I have 1 gig of ram and all the audio on the rest of my computer runs perfectly fine through my default audio card, ASIO4ALL and the US122, (itunes etc). So something is up with audition. This is the first time it hasn't worked properly, so I don't know what it could be.

Yeah.. I really should get more ram.
I'm definitely going to try your suggestions and I really appreciate you answering so quickly,
and no, I'm not recording a lot of tracks really.. I mean. I'm only doing one at a time, I'm not recording a drum set or anything, I was just doing vocals.
I have done tracks in the past with a huge number of tracks dedicated to clapping, and ambient noise things, and I've never had any trouble.
Just suddenly last night during a routine recording session it started to mess up.
I'm doing a virus scan now as a last resort, but I have no idea what changed that caused the computer to suddenly have so much trouble with latency, it's really weird.
Even looking online at forums and things I haven't found anything.

Why does it take so long for my wireless printer to start printing from my MacBook?

Why does it take so long for my wireless printer (HP Photosmart C4700) to start printing from my MacBook?
It seems to take about 3 minutes to spool up printing from any program on my MacBook, but it will start instantly with my iPhone.

Anyone have any insight on this?

Printer suddenly stops printing

I have CS 5 on a Mac Mavericks version OSX 10.9 and suddenly CS5 will not print, I get an error message which reads" There was an error opening your printer, printing functions will not be available until you have selected a printer and reopened any documents", I can print from Microsoft applications and from iPhoto and Aperture. Epson suggest it must be an Adobe problem as the R2880 will print from other applications. It has been suggested that I reset CS5 to original but I cannot where to do that, any help please

This was partly helpful thank you, I have updated manually and all updates have gone in and I can now get my RAW files to open,
BUT
Despite removing printer , downloading drivers again and then resetting printers still CS5 does not give me the option to print, I also have an Epson SX 200 which does not appear as an optional printer when I give the print command,
I seem to be between a rock and a hard place here, Adobe seem to think it is an Epson fault and Epson say it is definitely Adobe fault,
I have over £1000 value of CS5 and an Epson R2880 printer and cannot get a print from it.
I am loathed to take up Adobe offer of paying for CS6 and Lightroom on a monthly basis then find I cannot print on that either,
Perhaps I will have to go back to Aperture, which I do not want to, I can print ok from that, which again points to an Adobe problem,

HT3669 I have a HP Deskjet 2540 that now will not print. How can I get this printer to start printing again?

I just got a Mac Mini. There was the OS 10.9.2 update and now my printer will not work. I have tried to re-download the driver. I have done and re-done the printer and scanner cue. I have now deleted the printer and the installation but I don't see my printer on this list. It is a brand new printer. Please help!

Try Resetting the printing system:
http://support.apple.com/kb/PH14141

Siri suddenly started working today and i cant control my iphone anymore, siri suddenly started working today and i cant control my iphone anymore

For the first time siri started working, completely out of the blue. If i had turned it on it was a long time ago, and has never worked before. I cannot scroll down the page in settings, for example, to change anything. The phone is very unresponsive to touch, I cannot flip across screens either.

That isn't Siri, you have VoiceOver turned on (which uses the same voice as Siri to speak things you touch on the screen). To turn this off do the following:
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

Printer Suddenly Stopped Printing in Color

To isolate the problem to the printer, I printed a supplies status and printer test page from the printer touchscreen. They both printed in b/w. Any help much appreciated.

Hi @EMSFL,
Welcome to the HP Forums!
I see that your HP Envy 110 will not print in color and that the black is streaky. I am sorry to hear that but I am happy to help!
For further assistance, I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If you are using genuine HP ink cartridges or refills.
In the meantime, please see this print quality guide. Troubleshooting Print Quality Issues.
Hope this guide helps, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My i phone 4 screen suddenly starts showing funny and distorted images then goes blank. how do i get the screen back to normal.?

my i phone screen starts blinking and showing funny and distorted images before going blank. now it's blank,how do i get it back to normal.?

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data, but a reset can cure some glitches.
If this does not work, try to set it up as new device, explained in this article:
How to back up your data and set up as a new device
Don't use the backup afterwards, to rule out a software problem. If the camera is working again, restore from the backup.

Printer suddenly started printing blurry and double vision like

Similar Messages

Maybe you are looking for