Printer System Reset Question...

Does resetting the printer system remove the printer and the drivers? or the printer drivers remain?
Thank You!

It removes the printers from the list, removes and preferences for the printers. It does not remove the drivers from the operating system.
Complete Description

Similar Messages

  • Printer System Reset Asking for Password...

    Evening,
    Today I tried a Printing System Reset by doing a option click in the printer queue on the Print and Fax section of the System Preference menu. However for some reason when I hit the reset button, OSX asked for my user account password, is this normal, I am the only user account on my computer.
    Thank You!

    Matt Broughton wrote:
    I don't think that it normally does ask for authentication, but I would not consider it wrong.  It could be that padlock at the bottom of the Print & Fax pane showed that it was "locked".  In such a case, the system should definitely ask for an administrator's user name and password.
    Matt,
    The printer reset menu does not have the keylock in the locked position when it happened. However, today I reseted the system today and it did not asked for a password today which makes me think that it was a permissions problem, since I did a repair permissions after seeing that. Don't know if the permission repair had to do with this but the problem is fixed.
    Thank You!

  • How do I reset print system from terminal

    I was having trouble seeing my desktop's shared printer from my laptop, so I ran the following in the terminal:
    cupsctl BrowseProtocols='"cups dnssd"'
    Now any app that so much as thinks about printing crashes, including the system preferences. I am totally hosed here. How can I undo this? I can't get to any printer dialog to "reset the print system"

    AFAIK, there is no Terminal command to reset the printing system. This question was asked a while ago for Leopard and this was the answer then - don't know if this has changed for SL. The CUPS man pages would suggest it hasn't...
    But there is now the ability to reset the cups daemon configuration file via the CUPS web page. Using your browser, open the CUPS Admin page
    http://127.0.0.1:631/admin
    Here you will see the button 'Edit Configuration File'. Click this and you will see the cupsd.conf entries. Looking through this file shows that network shared printers are browsed using "BrowseLocalProtocols CUPS dnssd", the same as you tried to enter with the other command which could be only for 10.5?
    Anyway, here you will also see the button 'Use Default Configuration File'. Click this and then click Save Changes. This will prompt for your admin username and password. Enter these and OK. Hopefully this gets you back the ability to access Print & Fax and to print again.
    Pahu
    Message was edited by: PAHU

  • TS3147 Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. H

    Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. Help?

    Hello,
    It isn't the fw in Network you want o use or look at, that's for something completely different.
    My first suspect is the Power Adapter on the LaCie has gone.
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

  • Reset Printing System does not exist on my computer!!!

    I have been trying to get my HP PSC 2175 to print and working with HP support to do this. It just prints out blank pages. The last thing they sent me was to Reset the printing system using the Printer Setup Utility. And they sent me to the below link:
    http://docs.info.apple.com/article.html?artnum=301185
    For whatever reason, the "Reset Printing System" DOES NOT EXIST on my computer. I actually sent screen captures to show them. The first showed my
    version of the Printer Setup Utility (3.0) and the second showed the
    Printer Setup Utility menu - with no such option. I am running OS 10.4.4 and have all of the updates. I even opened the Printer Setup Utility holding down the "option" key.
    Does anyone know how to reclaim this feature???
    thanks
    eric

    After all of the emails back and forth with HP, I have really only done two things: A complete manual uninstall - which is a royal pain in the butt. That is worse than any uninstall with windows, and way worse than Class MacOS. Then they kept trying to get me to Reset the Printing system - which is what I can't do.
    I upgraded to Tiger via a DVD - straight from the box. I had 10.3.x, bought Tiger and upgraded. I have since updated it via the website. I think what I just installed was the combo updater - but I don't think it really did anything as I had already done that.
    If there is a better way to go, please let me know. I searched all over Apple's site for just that piece of the printing system, but unlike the old OS, there doesn't seem to be a way to download those components.

  • I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! It seems to see the scanner, but never the printer. HELP!

    I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! I see no printers available in the Print & Scan area. If I click "+" it seems to see the scanner, but never the printer. HELP!

    The printer component uses a different protocol to advertise itself on the network compared to the scanner component and it can take several seconds longer to appear after the scanner has.
    That said, with the introduction of AirPrint, the MG should be seen as Bonjour Multifunction in the Add Printer window, as shown below.
    Selecting this Bonjour Multifunction entry will create a printer using AirPrint and a scanner using the iCA driver.
    So do you see the MG5220 as Bonjour Multifunction or just Bonjour?

  • Ahhhhh... change the description for "Reset printing system"!!!!!!!!!!

    It reads exactly like this:
    "Are you sure you want to reset the printing system?
    This will delete all of your existing printer queues and all pending print jobs."
    Who would expect this will delete all the installed printers??
    Apple should really change this warning in the dialog box to
    "Are you sure you want to reset the printing system?
    This will delete all of your existing printer queues and all pending print jobs *and all the printers installed in your system*."

    "Installed printer" means exactly the same thing as "print queue," although I agree this might not be obvious.

  • Erreonously did 'Reset Printing System..."

    Hello Mac Friends
    I did a 'Reset Printing System..." and thus lost all the Presets in the printing dialogue (like Canon papers, my customized settings etc.). There's only "Standard" anymore
    I think there is a pref file which I could restore from my daily backup, but which one?
    I tried a few and also was searching in the forum with no success so far.
    Thank you very much for help!
    Donat
    G4 1.25 Dual, 2 GB   Mac OS X (10.4.5)  

    Hello
    I istalled new Canon drivers and made the settings anew; so this is solved

  • Reset printing system, now I can't connect to the wireless printer

    I have an HP wireless printer that worked perfectly on the wireless network from this computer half an hour ago. the second print job could not connect to the printer, so I reset the printing system (stupidly). Now when I go to "add a printer" in the print and scan menu, nothing pops up. My computer and printer are both connected to the same wireless network.

    The protocol that advertises the printer on the network is called Bonjour. There are currently users who have upgraded to Yosemite that can no longer see the printer, but I've not read about Mavericks users having the same issue.
    One test is to enable the Bonjour browser in Safari. This will then let you test if the Mac can see the HP. To do so, open Safari > Preferences and select the Advanced tab. You will see an entry called Bonjour. Select to show Bonjour in your Bookmarks menu. Then close the Preferences pane and select the Bonjour entry in the Bookmarks menu. Do you see the HP? If no, then using the control panel on the HP, print a network configuration list to determine what IP address the printer is using. Once you have this address, enter this as the URL in Safari. This should result in you connecting to the internal web page of the HP. Does this work?

  • I am unable to reset printing systems on my mac

    I am unable to reset ' printing systems' on my iMac - can you help? The printer will not print and tells me it's 'offline' when I am connected.

    Hi gordon167,
    Thank you for visiting Apple Support Communities.
    So you've tried to reset the print system like in this article?
    Mac OS X: How to reset the printing system
    http://support.apple.com/kb/HT1341
    If so, or if it didn't help, please check out this article to insure the setup is correct, with all updates, and note there are links to further troubleshooting at the bottom if needed.
    Mac Basics: Printing in OS X
    http://support.apple.com/kb/HT4670
    Best Regards,
    Nubz

  • "no printer selected" unless i reset printing system

    My printer is never recognized unless i go into the printer setup utility and click on "reset printing system" Then i wait for the utilty to find my printer and i can print. Everytime i shut off my computer, i have to reset the printing system in order to use the printer.
    Does anyone know the solution to this problem?

    1 back up your stuff to an external drive if at all possible. Use something like Carbon Copy Cloner or SuperDuper!.
    2 get out the system CD or DVD which came with your system, or the retail copy of OS X which you bought separately if you upgraded your system software with a newer version of the OS.
    3 boot from the CD or DVD noted above by inserting it into the optical drive and restarting holding down the 'C' key.
    4 select 'Install' from the options at startup. The system will tell you that you need to change some options to do an install. Tell it yes. You will be presented with a list of options, one of which will be to do an erase install (which will erase your drive and you'll have to move over all your stuff from your backup, you did make a backup, didn't you?) and one of which will be an archival install, which will move your current system files into a folder named Previous Systems and which will install a brand new system. Select archival install.
    5 once the install is complete, restart your Mac on the internal drive, and verify that all is well. You can move items you want to keep from the old system, such as fonts, over to the new system and then toss the Previous System folder into the Trash.

  • I have an iMac OSLion.  After accidently deleting the printer, I have reset the printer system.  Then plug printer in and hoped it would recognize it, but no. Now what do I do to get the printer back?

    I have an IMac OS Lion.  After accidently deleting the printer I have reset the printing system, and plugged the printer in again, and hoped the computer would recognize it, but no it didn't.  Now what do I do to get the printer back again?

    Hello.
    You'll probably have to add the printer again. You can do it like this:
    System Preferences > Print & Scan. Click on the '+' icon and choose your printer.
    Morgan

  • Error Print system failed. HP OJ 6500A

    Hi,
    The moement I switch the printer on it goes through it motions an end get stuck on the printing system has failed. Error code  0x.....0022. Going through the forum and lot of googling I do not get a definite solution to this problem. I do not want to chuck the printer away as I have a whole set of new cartridges and I believe it is a small problem to the printer. I will appreciate any help from real HP technicians. Can somebody please help? And btw.... this is not my first printer that I am fixing so please, you might get technical and skip the replace, reset part of any advice.

    Hi there @Teebos, welcome back!
    I read your post about the Ink System Failure message you are faced with on your Officejet 6500A. I am going to post you all of my suggestions to try for the issue that could be "possible" solutions.
    'Ink Cartridge Problem' Message Displays on the Product Control Panel
    'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
    Bob Headrick's "Soaking the Printhead" (please read his instructions if you chose to try this step)
    If the troubleshooting does not help at all, I would lastly suggest technical support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Good luck!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • CS Print system and ML 10.8.2

    My university is using CS Print (formerly sold by http://universities.cbord.com/solutions/) which I run in my 27" iMac/Mountain Lion labs on WindowsServer 2003 Dells to provide the means for students to swipe their ID cards and pay for printing. We use HP printers.
    We've been using this system for a few years now, and originally getting it set up in the first of four labs nearly required a team of NASA and Cal Tech engineers an entire semester to make it work (I only exaggerate slightly). I was not involved in choosing this particular workflow, but have to somehow keep it running with the help of several people.
    The early problems with this system involved students needing to authenticate multiple times on the Mac (running Snow Leopard) before the job would show up on the Dell's screen. If I changed toner in the printer or had to reboot it or the Dell, that somehow reset the system and the next person to print would need my admin password entered to unpause the printer. That would usually fix the problem for the entire lab.
    We've also had students' cards give a bogus "no funds" error (or say they were many thousands of dollars in the negative), or (even to this day) the print system charges a single 10 cents regardless of number of pages printed.
    My current biggest problem running Mountain Lion 10.8.1 and now 10.8.2 involves each workstation saying the printer is paused and a print operator needs to enter a password. Doing so every time someone prints is obviously impractical, but once done, it's like an enema for the print cue and a long list of jobs builds on the Dell's screen. At that point sometimes people can print the jobs, sometimes not.
    The authentication problem returns repeatedly, even on the same workstations where the admin password was entered, and is causing everyone exasperation.
    As a Mac person I have no patience with obsolete POS Windows software, but as I said, this is what our campus uses.
    I would like to hear anyone else's experience with CS Print and how one deals with the authentication errors, especially. I understand Pharos.com makes what looks like a viable alternative (UniPrint) and would like to hear from those using it so I can pass on the info.
    PS: Lion seemed to have issues with network logins which I solved by going to Mountain Lion. But even ML 10.8.2 still "Addresses an issue that may prevent Active Directory accounts from being locked out". I wonder if this is part of my problem?

    Similar pause issue here, running on 10.8.2, authenticated against a Windows 2008 server, with mostly HP's on campus, and only HP's having this issue. We use PaperCut to monitor and charge for printing, however.
    We're still testing, but an upgrade of the firmware on our printers has helped thus far (two days). Worth a shot.
    Please keep updating - I feel better knowing we're not the only ones!

  • Print Settings Reset

    Each time I startup from shut-down, I have to go to settings, delete one duplicate of my local USB printer and reset my network printer to be the default (local printer is selected as default). Locking the settings seems to do no good. Help!

    Go to the Print & Fax system preference pane and hold control, then right-click in the white box at the left and click "Reset Printing System..." That deletes all of the printers and their caches. Then re-add your printer and reboot. Any luck?

Maybe you are looking for