Printer to take cartridges from OfficeJet 6300 All-in-one

Hi
I have an OfficeJet 6300 All-in-one which I really use just as a printer. I'm also running short of space so am looking to replace it with a standalone printer.
I have built up a stock of cartridges for the 6300 (337,339 and 342,343). Can somebody recommend a printer that will be able to take my cartridges?
Thanks

Hi,
Do you still keep the covers ? Compatible printers should be on the covers.
Regards.
Edit:
Actually the number may vary from country to country, based on the following link, nothing fits your printer even same 337:
http://h10010.www1.hp.com/wwpc/ie/en/sm/WF06c/A1-12771-64199-69422-69422-457378-457380.html
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HP Officejet 6300 All-in-One Printer

I broke the hinge on the printer when I went to lift the door to change the ink cartridge. Is there a way to replace the hinge. It isn't properly aligned now and shows a "close door" message

Hi kkw1,
Welcome to the HP Forums!
I understand that you broke the hinge off your HP Officejet 6300.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps, and have a great day.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

New Cartridge Trouble OfficeJet 4620 All in One

Hello,
I just purchased a black ink cartige for my Office Jet 4630. I purchased a 564 XL black. Once i intalled the cartridge I tried to use my copy function and it shot out a very ugly copy. On to subsequent tries I recieved basically a blank piece of paper. I went to the store and exchanged it for another cartridge with the result being a blank copy. Per the printer the cartridge is installled. Thinking that maybe the other cartridges were low and it was being annoying because despite my wanting a black copy it wanted new cartridges I switched them all out. Blank page again. I went into the printer application on my lap top and printed a Diagnostic page and where the black would be its white. I then tried to clean the print heads becuse I have been using the copy function quite a bit lately and prnted another diagnostic page with no change. How can I correct this issue?
Regards.
This question was solved.
View Solution.

The document here may help resolve black not printing on your Officejet 4620.
If the troubleshooting steps there do not resolve the issue I sould suggest you contact HP, 1-800-HPINVENt if you are in the US or see the document here for elsewhere. They may be able to help resolve the issue even if the printer is not in warranty.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I just bought a new iMAC and cannot print with my old HPO Officejet G85 all in one printer. How do I get the printer working.

I just bought a new iMac and cannot get my old HP Officejet G85 printer to work. What can I do to get it to print from the computer?
JC

The list of supported printers is below. Yours isn't on it.
OS X: Printer and scanner software available for download

Printing Mirror Image on HP Officejet 6600 All In One

Trying to print an Avery (Microsoft) T-Shirt Template. I am running 64bit Windows 8.1. I have tried everything to access Mirror Image on my Printer but I cannot find Mirror Image anywhere. After I click on PROPERTIES I am only shown"Lay Out' & "Paper Quality". When I click on "ADVANCE SETTINGS" in "LAYOUT" there is "PRINTER FEATURES" This only shows "Print in Grayscale"; "Resolution"; Output Quality": HP Realife Technologies"; Borderless Printing" & " Print all Text as Black.. I have been trying for the last 7 hours to try and figure this out. Hopefully someone can come up with a solution. My warranty ran out 2 months ago so HP Support wasn't very supportive.

Hi,
Pleae try the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bpu02032
Other option using Word:
http://www.techrepublic.com/blog/windows-and-office/quick-tip-flip-text-for-a-mirror-image-in-word/#...
My suggestion: flip image before print. You can use a photo editor to flip images.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Tying to re-install my hp officejet 6310 all in one with windows 7 op system

Fomerally had this working great. a tech had some type of patch which allowed this device to work with my Windows operating systerm instead of XP. I didn't make a back up disk and now I can't get it to load. Anyone come across this issue?

Hi, Please download software and driver from the following link and install on your computer: http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-6300-All-in-One-Printer-series/1120059/model/1120060#Z7_3054ICK0KGTE30AQO5O3KA30R1 Regards.

HP Officejet 6310 all-in-one wireless option questions

I have a HP Officejet 6300 All-in-One printer and I was using it with my wire network connection. I just moved to a new home, which I rent, and I do not want to make new wholes to past the cables then this is my question:
"I have a Cisco Linksys AE1000 high performance wireless-N usb adpater (dual band)" and I saw this product Female USB A to Male Ethernet RJ45 Plug Adapter (on Amazon that I think will be great if I can use it). Can I connect them to make my printer wireless?"
Please help.
Thanks.
BAK

Unfortunately that will not work for this printer. Wireless printing is set up through the printers software that you install on your computer. Since this printer is not a wireless printer, there will be no option to set it up wirelessly in the software, the only options will be ethernet or USB.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ? Loooking for any answers ! Thank Yopu ,JS

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

HP OfficeJet 6500A all in one Printer . No European size envelopes apart from C6 on the printer.

We have the OfficeJet 6500A All In One Printer. It is on a network to two computers one using Windows Vista and the other Windows7.
It seems strange that the only size of envelope for the European Market is a C6. There is no facility for customising a DL or C5 which are the other two popular sizes of envelopes. We cannot customize from either computer. We have tried altering the specifications of other envelopes listed for the printer but to no avail. Has anyone got a solution to this problem or are we going to have to wait for HP to upgrade the printer programme. Word Perfect Office X4 is the word procesing programme in use plus a basic Microsft Word that is OEM.

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

HP OfficeJet 6310 All-In-One printer on a iMAC OSX version 10.9.5 system
Hello,
As I don't print in color much but had need to I discovered my printer not printing in color. I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled). The printer still won't print color but it advances the paper as if it was printing - just no ink on paper. I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities. The test page print does not show color either. I have no error messages. Don't know what else to do.
thanks
DH

Hi there @dhengr!
Thanks for contacting the HP Forums!
I can see your having a print quality issue with your HP OfficeJet 6310. I should be able to provide documentation that will help locate a resolution. You mentioned you have already tried another HP95 tri-color cartridge with no resolution. I also noticed you said that the quality report from the printer also has no color ink.
If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer. I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer. If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone. They deal with hardware warranty and replacement options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great weekend and thank you again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Hp officejet j4580 all-in-one won't print from the internet.

My officejet j4580 all-in-one printer won't print anything I try to print off the internet, nor from microsoft word. I tried reinstalling, but it gets stuck at 94%, and it took almost 3 hours to get to that point. What can I do? My operating system is microsoft vista.
This question was solved.
View Solution.

Hi,
Here are a couple of things to try. I would first start with downloading and running the Print Diagnostic Utility. IF this doesn't clear it up, then try the document on Problems printing from the internet.
Print Diagnostic Utility
Problems Printing from the Internet
See if either of these help.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Can i use my android to print from HP Officejet J6450 all-in one

i have downloaded the application from android to print using my android phone...is the ...HP Officejet J6450 all in one printer capable of doing this ....or am i a dreamer?

Hi,
Unforunately your printer model is not supported the HP ePrint Home & Biz app.
You may find any of the supported products listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01619067&lc=en&dlc=en&cc=us&product=3857218#N34
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printing from 10.6.6 to an HP Officejet 6210xi All-in-One printer

I have a brand new iMac - 27-inch, 3.2Ghz running 10.6.6 - connected to an older printer, an HP Officejet 6210xi All-in-One printer, and I am unable to print.
Running the Printer System Preferences sees the printer via USB, and I install the print-drivers that come with Snow Leopard, but absolutely nothing prints. Trying to print just produces a useless "Error" error-message in the print-queue window, with no detailed explanation as to why.
I have tried downloading and installing the latest MacOS print-driver from HP, but this doesn't help. I can't print a single page.
I assume I should be using the print-drivers that come with Snow Leopard, but I have no idea why printing does not work. I can disconnect the USB cable from the new iMac, and connect it to my older iMac, running 10.4 and printing works fine. So I know that the USB cable and printer are OK. But if I move the USB cable to the new iMac, printing does not work at all.
I have tried different USB ports on the new iMac, I have disconnected all USB cables and restarted the iMac, then re-connected only the USB cable to the printer, but no luck.
Any ideas as to what else I can try?
Thanks,
--- Christer

When you say you have installed the latest print driver from HP do you mean from the HP site or do you mean using Software Update/from Apple site?
If you mean the All-in-one package that sits in your app folder try uninstalling that, (there is an uninstaller in it), and then try again with OSX.
I think when you plug in your machine the Mac should recognise your printer and ask if you want to download the appropriate SW.
So, my steps would be.....
1). Uninstall the HP All in one.
2).Restart.
3). Plug in to Mac, (and power), and switch on 6210.
4). Wait a few seconds for the Mac to recognise and prompt, or run Software Update.
......if still no joy;
5). Re-apply combo updater.
6). Plug in to Mac, (and power), and switch on 6210.
7). Wait a few seconds for the Mac to recognise and prompt, or run Software Update.
8). Come back and curse/thank me, then go back to the HP site and see if a more up to date package exists

How do I print from my Samsung Galaxy Tab 4 to my HP Officejet J468 All-in-One printer?

I just got a Samsung Galaxy 4 Tablet and I'm trying to figure out how to print to my HP OfficeJet J4680 All-in-One. Is there an app that I need to download?

Hi,
Unfortunately your printer spec indicates that the printer is not wireless compatabile so you won't be able to use any mobile apps with this printer.
I've included the list of web connected printers here.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

My PC can't stand the connection to HP Officejet 4630 all-in-one printer

Hi everybody,
I got a HP Officejet 4630 all-in-one printer, i manadge to connect it to the network. I select a static IP and i can reach the printer through the browser.
I can add the printer to the PC, the system can find it after few second od scannig, and than i can print a test page.
The problem is that if I reboot the PC or the printer, or both, i can' print no more.
The icon of the printer in the "device and printer panel" is blurred with the green thick, but i can still reach the print through the browser and i can print with the ePrint.
If I use the "problem solving" service of Windows, it can't find any problem. But i can't still print.
I don't know what to do, it seems a problem of the computer (i even tryed to turn off the firewall but it doesn't change anything)
Is there someone that could help me?
Thank you so much

Hi @poporni,
Welcome to the HP Forums!
I noticed that your HP Officejet 4630 keeps losing the wireless connection on Windows 7. I am happy to look into this connection issue for you!
Please, take a look through this guide, Printer Does Not Maintain Wireless Connection.
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend, our HP Wireless Printing Center - Troubleshooting Issues website.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printer to take cartridges from OfficeJet 6300 All-in-one

Similar Messages

Maybe you are looking for