Printer Unable to connect on Windows 8.1 64 bit based Lenovo Laptop.

We have HP LaserJet 3030 all in one printer installed on Windows XP Professional. We are using LAN network to connect the printer on network. But our Printer Unable to connect on Windows 8.1 64 bit based Lenovo Laptop. Also check for windows update for this issue. Please fix this quickly.

Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?
If you can't get a working installer via the standard download links, try the following download links instead:
iTunes 11.1.4 for Windows (32-bit) - iTunesSetup.exe
iTunes 11.1.4 for Windows (64-bit) - iTunes64Setup.exe

Similar Messages

HP Officejet Pro 8000 Wireless: HP printer unable to connect to wireless router.

Installing new printer, getting error msg saying HP printer unable to connect to wireless router. MAC address filtering may be enabled on your wireless router which can prevent HP printer from connecting to your wireless network during setup.
SOLUTION says: If MAC address filtering is enabled and you would like to keep it enabled, you must add the MAC addressof your printer to the list of permitted devices for your wireless router before continuing.
My router is WD My Net N900 Router. MAC filtering is diabled. My security mode is WPA/WPA2 Personal.
I have run out of ideas to try and fix the issues, would appreciate some help.
Thanks,

Hi Jamshidk
I am surprised you are getting that message and you checked the router settings and it is showing that the Mac Filtering is disabled.
I would suggest connecting the printer to the router with a ethernet cable to get a valid IP address and then setup the wireless.
Print a configuration report.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01554589&lc=en&product=3760410&tmp...
Type the IP address from the configuration page in the address bar into internet explorer browser. This will open the embedded web server for the printer. Click on the Networking tab, on the left hand side select wireless. After this is setup and applied, disconnect the ethernet cable.
Should be on the wireless network. Takes about 1 minute.
Run the add printer wizard.
Go to start, devices and printers and select add a printer. (Win 7)
Test the printer.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can i install flash player for window 8.1(64 bit) on my laptop

how can i install flash player for window 8.1(64 bit) on my laptop?

For Internet Explorer, you don't. Microsoft has already done it.
For Firefox, Opera or Safari, use the Flash Player Plug-in (All other browsers)
For Chrome, you don't need to wither because Google puts it in the browser.

Unable to connect to Windows Printer

I have an HP Photosmart C3180 attached to my wife's Vista machine that I am unable to connect to. She had an XP machine until a few days ago that I had connected to via CUPS with smb://username@machine/share.
I've tried the same now that it's set up on the Vista machine with absolutely no luck, what I'm getting is the NTSTATUS_ACCESSDENIED messages when trying to print.

I suggest that the Vista system is refusing you permission to the resource.
You will have to look at the Vista end to fix this.
Is the printer shared in windows?
Is the firewall enabled?

Unable to connect to windows

I am having issues trying to connect to my desktop Windows machine. The macbook finds it for sharing a drive or a printer but then it asks me for a username and password and when I enter my windows one it tells me it is unable to connect. I have tried using other users on my computer but has be unhelpful. Help Please

Have a look at the guides on my website which may help.
http://www.ifelix.co.uk/tech/windowsxp.html
Also are you running any kind of internet security software?
iFelix

HP LaserJet Pro CM1415fn Color Multifunction Printer unable to connect to webapps, webforms

Hello,
I'm able to print to my printer - HP LaserJet Pro CM1415fnw Color Multifunction Printer - over my local network and the printer is connected to the router via wireless connection. No connectivity issues as far as the local network goes..
The problem I'm having is that for the past week (perhaps longer but I only noticed it a week ago) I'm unable to download the web forms or web apps from the printer's screen menu. I keep getting the message: Unable to connect to the network, please check your network connection etc etc etc.
I successfully printed to my hpeprint email address, so at least the printer is connected to the eprint network, but still can't access/download any of the web forms or web apps.
Has anyone experiencd this? I'm really stuck, can't figure out what the issue could be seeing as how the printer seems to be working over the local network and am able to print documents that I send to me hp e-print email address. Any suggestions or assistance would be greatly appreciated. thanks in advance... Robert

You're lucky to have SOME ePrint functionality left! I got a new m177fw from HP and the printer simply won't enable ePrint. I get a constant connecting screen or connection error screen. There aren't any problems with my network and I spoke with a HP customer service representative over the phone and it seems they are clueless that ePrint is currently broken on HP's end.

Unable to Connect to the database in RCU, Oracle11g XE on Laptop/Windows

Software downloaded unzipped and installed from OTN
OBIEE foundation 11.1.1.5
Repository Creation Utility 11.1.1.5
Oracle Database Express Edition 11.2
Issues
1. I installed Oracle 11g express edition. I am able to start/stop and run sql against the database however the homepage ("get started " accessed from Start > Programs > Oracle Database 11g XE > Get Started) does not work. This i will post in a separate thread but I am writing this anyway just in case it has some relevance.
2, This is the one I need help with. Can you confirm that these are the parameters when I hit the "create" option in RCU because I get the error message saying I cannot connect.
Hostname:This is the same as the hostname, when I go to cmd prompt like below
C:>hostname<enter> That is what I am using.
Port and Service :Can you confirm, Port = "1521" and Service = "XE". 1521 is the Database listener port when I installed Oracle 11g Database Express Edition. I am not putting the quotes in the boxes in the RCU.
Should the service be OracleServiceXE - i have tried it but does not work.
Anyway I get this message:
Unable to connect to the database using the provided details.
Please enter a valid hostname and port or check if the listener is up and running.
Any ideas appreciated.
By the way My lsnrctl status returns the following: (meaning the listeners are up!0
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\dir>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 13-MAR-2012 13:44
:03
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date 13-MAR-2012 10:55:11
Uptime 0 days 2 hr. 48 min. 51 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\myspecifichostname\listene
r\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=myspecifichostname)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=myspecifichostname)(PORT=8080)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Edited by: ideakat on Mar 13, 2012 1:57 PM

Hi,
Like Abhi said, check your tnsnames.ora file to check the port number and service name is correct or not for the Express Edition database you have installed.
and when you are running RCU installer, Please give system adminstrator account of OracleXE like 'sys' or 'system' account with confirmed port number and service name.
Hope this helps.
Regards,
Bose
Edited by: Bose on Mar 16, 2012 11:42 AM
Edited by: Bose on Mar 16, 2012 5:35 PM

HP officejet 6500A printer - unable to connect

unable to connect macbook pro to officejet 6500A plus
tried downloading software, updates, new drivers from apple and HP
device not found when setting up printer
any ideas (that don't involve buying a DELL laptop)

1. set up wireless connection on printer - all working fine
2. load software cd onto macbook
3. software cd loaded successfully
4. next step is to setup the connection to printeron macbook wirelessly
5. using software cd to complete this set up
6. but device not listed or found using os.10.6.6. nearby by printer function
7. uninstalled and reinstalled - same issue
8. have downloaded all the latest drivers for MAC & HP printers for MACs from respective sites, but 6 recurs

Printing unable to connect or printer switched off

Hi, just noticed something the other day when printing. I have an imac connected via ethernet to a AEBS connected to internet via modem. I also have a konica and oki connected for printing, via ethernet cable. Started to get message " unable to connect to printer, it may be switched off or IP address wrong." after latest update from apple.
konica connected via bonjour,
oki connected via oki tcp/ip.
Now if I start my konica and then oki I get a certain IP address for each model. As I'm printing via tcp/ip for the oki this is important. But if I start my oki and don't switch on my konica the Ip address for the oki changes! and it won't print but sits in the queue with the afor mentioned message. I then have to get the IP address again and change it in the system preferences. This is getting to be a pain. Even if system prefrences is locked, every time I start my machine it becomes unlocked.
Has anyone else had this specificate problem, could other people be getting this problem but not the IP message part.
Has anyone got any ideas. Also the new update is causing no end of problems with quark 7.3 but am working with a quark techician via email so hopefully this will be sorted. Any thoughts anyone
russell

Going to mark as answered as I have a work around

Unable to connect to Windows share

I had this problem before, I have no idea how I fixed it. I cannot connect to my Windows machine via Finder any more. I hooked a printer up to that machine, shared it, decided to add a guest account for others to access it. And bam, can't connect to the Windows machines via OS X.
I've ran the network setup wiz on the machine and made sure file sharing was on. I disabled the firewall. I can connect to the machine perfectly fine via a Linux box and another Windows machine.
Finder sees the server in the server list. Clicking on it just has Finder connecting indefinitely.
Finder->Connect to Server hangs for a bit and then returns:
There was an error connecting to the server “192.168.1.156”. Check the server name or IP address, and then try again.
Mounting via the command line fails:
mount -t smbfs //[email protected]/shows shows
mount_smbfs: mount error: /Users/Giblet/Movies/shows: Broken pipe
But smbclient works and lists information just fine.
smbclient -U giblet -W workgroup -L 192.168.1.156

Yup! Thanks. But ya know what.. I'm so used to not rebooting my Macs.. Reboot fixed it. Now to figure out how to get the printer work.

Cannot print to or connect to Windows-driven imagesetter

Our print shop uses an ABDick DPM34 HSC imagesetter that is run from a Windows 2000 RIP for making plates for offset printing. I usually send the files to the platemaker using a Mid 2012 Mac Pro 12 core running 10.8.2. On Tuesday (3-19-13) I sent a bunch of print jobs to the RIP – everything working fine as usual. The next day, Wednesday the 20th, I needed to resend a redo job and the print job would stop on a "Hold for Authorization." The job would not authorize using the regular account/password or the Guest account. I can no longer mount the shares for the Windows computer, as well. It shoes up in Finder window sidebar but the login window will only shake when given the correct account/password or the Guest account. Any other computer in our shop (running 10.7.5 or below) can print and connect to it. I can not fathom what has changed from Tuesday to Wednesday that would cause this. The only software that was installed between this period according to the About This Mac System Report were virus definitions. I have tried various remedies from various threads including checking that the clocks on the two machines were in sync, trying to connect through Connect to Server and the Terminal, resetting the printers (but now I can't readd the printers since it won't authorize my connection to the computer), reinstalling ML (I had since upgraded to 10.8.3 – no help – and the reinstall installed the same version when I was hoping it would start over at 10.8), and trying to connect through ethernet, WiFi and directly into the Windows machine. I'm at a loss and any leads would be greatly appreciated.
Thanks!

Try opening Keychain Access and removing the entry that you had saved for this connection to the Windows box. Then try adding the printer again or connecting to the shared folder.
FYI - If you enable LPR/LPD (could be called Unix Print Services in Win2k), then you can use LPD on the Mac instead of SMB. With the print service enabled on the Win2k server, on the Mac you add the printer by selecting the LPD protocol, entering the Win2k name or IP address in the Address field and the shared printer name in the Queue field. The last step is to select the appropriate printer model in the Use menu.

Unable to Connect to Windows File Shares

Steps I take to attempt to connect to a Windows File Share within the office. Being relatively new to the Mac, I am curious on why I am not able to connect to Windows File Shares.
1. Command-K
2. Server Address: smb://[server-hostname]/[sharename]
3. Click Connect
4. Connecting To Server..... (takes a short amount of time)
5. SMB/CIFS File System Authentication
- I then enter the domain, username and password
6. Click OK
7. Error: Could not connect to the server because the name or password is not correct.
What gives? I have confirmed and validated server hostname, sharename, appropriate persmissions for windows account, etc. I have tried IP Address instead of hostname, same outcome.
Any Ideas?
MacBook Pro 17" Mac OS X (10.4.8)

Hi Arus, not really a Windows® expert, but I think I've seen were putting the Domain name in there fixed it, but I can't find the exact way to do it, this is the closest I could find...
"If I try to connect to smb://domain, that's when I can authenticate. If I try smb://machine/share, I still get the error -43."
http://discussions.apple.com/thread.jspa?messageID=4727809&#4727809

Designjet 600 Plotter connected to Windows 7 Pro 64-bit. Will it work? HP sales says won't work.

I have an old Designjet 600 Plotter (model C2848A). I have connected it to several new PCs over the years with great success (using different OS, Win 95, 98, etc.. It still works great using windows XP. Now I have three new stations using Windows 7 Professional 64-bit. HP sales tells me this plotter will no longer work with Windows 7 (and want to sell me a new plotter). I find that hard to believe. Does anyone have any experience with this? I was going to try buying a 36 pin parrallel to USB connector and just plug it into my new PCs. But HP said it won't work so I have not tried. I assume I would need a driver for that to work correctly. Any suggestions???
This question was solved.
View Solution.

For 64 bit systems you can download the XP x64 drivers from here, then unzip the files into a new folder. Next go to the Devices and Printers folder, Add a Printer, select the proper port, then select "Have a Disk" and point to the folder where you unzipped the files.
USB to Parallel converters can be problematic. If you get one make sure it is supported on Windows 7 x64. The models in the posts here have been indicated to work with W7 x64.
I do not know if the Designjet 600 has a slot for an optional jetdirect card, if so this may be a better option. I picked up a suitable jetdirect card for my Designjet 650c on eBay for under $15 (shipping included) and have it running on the network here.
This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here, the real Designjet experts hang out there.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Unable to install Windows 7 Ultimate 64 bit on Lenovo 3000 J115 7387-26U

Hi Everyone,
I am unable to install Windows 7 Ultimate 64 bit on my Lenovo desktop. Model : 3000 J115 7387-26U.
When I try to boot my DVD, the systems makes a loud whirring noise.. as if trying to read from DVD, the screen goes blank couple of times and then Windows XP starts up (from my HDD).
I have a Windows 7 32 bit DVD and it successfully started up and I could see the install screen (though I didn't install it. I want to install 64 bit version of the software).
Anyone else seen this problem? Is there some workaround available?
Thanks for your help.
Swam

Hi:
The Intel link you posted doesn't work, so I don't know what you have tried.
See if this works...
Download the drivers from this link below (first file listed -- 64 bit).
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&keyword=Intel+Rap...
Extract (copy) the files onto a usb flash drive without any folders.
With the flash drive and W7 installation media plugged into the machine, boot from the W7 installation media.
After you select the install now option, select the Drive Options - Advanced menu, then select the Load Driver option.
You should now see the storage driver files listed.
If you check the box, it will only include the compatible driver.
Follow the prompts and hopefully, W7 will install.

How to create Rescue and Recovery disc for Windows Vista Home Basic with G530 Lenovo Laptop?

Hi All,
I have purchased G530 Lenovo laptop 2 weeks back.
I coudn't find installation/recovery discs in my laptop box.
I went across the forums and came to know that it is not available now-a-days as it was coming previously.
So, anybody can help me, how to create a recovery disc?
This is needed when I format my laptop.
Thanks in advance.
Regards,
Umesh.

Click on what used to be the "Start" button and search for "create" or "recovery". It took me a while to find it but it is there.
Use a cd for the first disc and 2 DVD's for the other discs.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Printer Unable to connect on Windows 8.1 64 bit based Lenovo Laptop.

Similar Messages

Maybe you are looking for