Printer update required
Have just purchased a New HP touchsmart 3d desktop on windows 7 have a printer Hp Photosmart wireless printer which runs ok with it, however I have an older Hp Photosmart D6100 series UBS cable that wont run with it. Does it require an update ?
Hi,
Please go to the following site to select the right "bit", download the Utility then run on your machine. Hope it will work thiis out for you.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1156668&lang=en&cc=us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed (and am given no option for updating my OS). How can I upgrade my OS to 10.6 or newer?
You have to understand the difference between an Update and an Upgrade.
An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to OSX 10.5 or the .11 added to OSX 10.4..
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 Leopard was written for Power PC Macs with code added to force it to run on Intel processors.
10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
10.7 Lion ($19.99) used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
10.8 Mountain Lion ($19.99) is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
10.9 Mavericks is pure 64 bit and is a free download from the App store.
The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, Mountain Lion or Mavericks which are downloads only.
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply. -
HP4501e "print spooler off" error after installing printer update
Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?
Loralee,
?? I am sorry the computer is not working. I don't work for HP and cannot comment on lawsuits or other calamities.
If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
If you are using a Notebook:
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
This does not fix severe Operating System errors -- it is just a device reset. It can fix minor problems that updates sometimes cause.
============================================================================
I am sorry you are having so much trouble.
Other help:
HP Mobile Printing
You can call HP for help --
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
Happy New Year, Loralee! I know it seems to be getting off to a rocky start!
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur -
Errors Regarding Printer Updates - Windows 10 Updates
Received notification from Windows 10 regarding new printer updates for my HP printer. I download them and they try to install but continuously fail with the following errors.***********************************************************************************************Hewlett-Packard - Enterprise WSD Multi-Function Printer, Multi-Function Printer, Other hardware - ull Print - HP ENVY 7640 series - Error 0x8024200b HP drive update for Fax - HP ENVY 7640 series - Error 0x80070490 Other Windows 10 updates install without issue. Any ideas?
Hi, fcullision.I have gone about performing the same tasks as you BUT I am only facing one small problem with the Password Utility; it is missing the ,dll file. However, UNLIKE you, I have performed all the updates AFTER installation of Windoww 10. Microsoft ran a compatibility check which indicated that everything about my system was 100% compatibile and I was ready for the update. Even so, the Toshiba Service Station NEVER has indicated there was a task that needed to be performed before (and now after the Windows 10 installation) or since installation. Therefore, I conclude that you CAN perform the necessary installations provided you have updated all required files so the conversion is smooth and flawless.Good luck!Bi-Ill
-
i have the version of itunes the ios 7 update requires but every time i try to update my phone it says i need the itunes version 11.0.5 but i already have it?
You need iTunes 11.1 which is not available for download in google chrome or other browsers. The only browser it has worked for with me is Safari. Hope this helps!
-
Microsoft Visual Basic 2010 Express.
I am new to Visual Basic programing and i am trying to understand the relationships between Datasets, database, table Adaptors. I have to following code that is is giving me the following error" Unable to load, Update requires a valid DeleteCommand
when passed DataRow collection with deleted rows".
I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
It seems that i can delete the data on the DataGridView Table and it only displays the correct data. but my database is not updating, even though the data grid displays differently.I can determine this because, when i save the offset database, i have all
the previous uploads and all the rows that i wanted to delete are still there.
My final goal is to be able to import offset data from a CSV file, save this data on the pc, send a copy of this data to a NuermicUpDown so the customer can modify certain numbers. From here they download all the date to a controller. IF the customer
needs to modify the imported data, they can go to a tab with a data grid view and modify the table. They will also have to option to save the modified data into a csv file.
Im not sure if i am making this overcomplicated or if there is a easier way to program this.
CODE:
Private Function LoadOffSetData()
Dim LoadOffsetDialog As New OpenFileDialog 'create a new open file dialog and setup its parameters
LoadOffsetDialog.DefaultExt = "csv"
LoadOffsetDialog.Filter = "csv|*.csv"
LoadOffsetDialog.Title = "Load Offset Data"
LoadOffsetDialog.FileName = "RollCoaterOffset.csv"
If LoadOffsetDialog.ShowDialog() = Windows.Forms.DialogResult.OK Then 'show the dialog and if the result is ok then
Try
Dim myStream As New System.IO.StreamReader(LoadOffsetDialog.OpenFile) 'try to open the file with a stream reader
If (myStream IsNot Nothing) Then 'if the file is valid
For Each oldRow As MaterionOffsetDataSet.OffsetTableRow In MaterionOffsetDataSet.OffsetTable.Rows
oldRow.Delete()
'delete all of the existing rows
Next
'OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
Dim rowvalue As String
Dim cellvalue(25) As String
'Reading CSV file content
While myStream.Peek() <> -1
Dim NRow As MaterionOffsetDataSet.OffsetTableRow
rowvalue = myStream.ReadLine()
cellvalue = rowvalue.Split(","c) 'check what is ur separator
NRow = MaterionOffsetDataSet.OffsetTable.Rows.Add(cellvalue)
Me.OffsetTableTableAdapter.Update(NRow)
End While
Me.OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
MainOffset.Value = OffsetTableTableAdapter.MainOffsetValue 'saves all the table offsets
to the offset numericUpDown registers in the main window
StationOffset01.Value = OffsetTableTableAdapter.Station01Value
StationOffset02.Value = OffsetTableTableAdapter.Station02Value
myStream.Close() 'close the stream
Return True
Else 'if we were not able to open the file then
MsgBox("Unable to load, check file name and location") 'let the operator know that the file wasn't able to open
Return False
End If
Catch ex As Exception
MsgBox("Unable to load, " + ex.Message)
Return False
End Try
Else
Return False
End If
End FunctionHello SaulMTZ,
>>I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
This error usually shows that you do not initialize the
DeleteCommand object, you could check this
article to see if you get a workaround.
>> Im not sure if i am making this overcomplicated or if there is a easier way to program this.
If you are working CSV file, you could use OleDB to read it which would treat the CSV file as a Table:
http://www.codeproject.com/Articles/27802/Using-OleDb-to-Import-Text-Files-tab-CSV-custom
which seems to be easier (in my opinion).
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have just purchased a 5S iphone, when I tried to sync with my Imac it comes up with "...requires iTunes version 11.1 or later.." my iTunes version is 10.6.3, I rechecked software updates but says there is no updates required??? I checked when last auto update was done which was 01/07/12 I also tried downloading from web iTunes version 11.1.5 but it wont load because I don't have min version 10.6.8. What can I do to sort this out? Note: I am a not computer savy so be easy on me.
If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing! -
Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please. Wasting ink and paper at the moment!!!!!!
I have tried the printer with my laptop (not updated) and everything is fine. It's just the beautiful 27" Imac that can no longer print.Might be a corrupted printer preference file ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Preferences
Click Go
Move the com.apple.PrinterPrefs.plist file from the Preferences folder to the Trash.
Restart your Mac, restart the printer... -
after last HP printer update, my hp business 2800 won't print but instead crashes all programs. OS 10.6.8.
Use this driver:
http://support.apple.com/kb/DL907 -
Officejet Pro 6830 all in one - screen stuck on "checking for printer updates"
Windows 7 X64 install
I ran through the entire installation process and while the printer will print and will scan - the printer is hung on the message "checking for printer updates" with a red x below that message. I let it set all night and no change. The printer is setup as a wired network connection and can be seen with any of the tools. I have not errors on my system. I have uninstalled the software and reinstalled twice without success. I tried running a firmware update, but the firmware update states that I have the latest firmware rev. I even unplugged the printer and plugged it directly into the wall - n o change. Evertime I startup the printer screen, just hangs on that screen.
Please help.I have the exact same problem with my new HP Officejet Pro 6830 printer. Please could you provide a solution else I guess it will have to go back to the shop as I only picked it up this afternoon.
Setup went ok and it even managed to print a couple of pages. But next time it started up (with wired ethernet connection) this problem occurred and happens every time ever since. (It is possible to use the printer for printing and scanning via PC, but the whole time its display is showing the "checking for printer updates" message.)
This even happens if the ethernet cable is not connected on startup (meaning the printer cannot be used as a standalone printer / copier either at the moment).
If I press the red cross (which I guess cancels the update searching) then I get a blue screen saying "B871634E" for a second or so, afterwhich I get a black screen with the message "There is a problem with the printer. Turn the printer Off, then On." and cannot do anything else. (The problem is the same after doing a printer off then on - even when following the "hard reset" procedure already mentioned.)
On checking the firmware version via the PC utility (while the printer sits there "checking for printer updates"), the PC utility app reported that the firmware was the latest version. -
My mac keeps saying "Update required" at boot time
Hi,
This is really beginning to drive me nuts. Every time I boot my Mac (ok, its not every day I do that, but still) it prompts with two options:
1) Update Required
2) Log on as Guest.
When I click option 1 and enter my password, the system boots and I get the normal grey login screen and can log on using my password.
No updates are available.
I then shut down the mac, and everything repeats itself. I cannot get rid of this "Update required" thing and its a bit annoying that I need to logon twice every time.
Any ideas anyone?
Thanks a million in advance.
Details:
MacBook Air mid-2011, Corei7/4Gb RAM/256Gb SSD
OS X Mountain LionHold on a second while I try this out:
https://discussions.apple.com/thread/3321886?start=0&tstart=0 -
I have problems in the Safari browser , and I have deleted the program using the "Clean My Mac" App and now I can not install it , he say " This update requires mac ox 10.6 "
I would like to install the Safari browser on my system Lion os x 10.7.1 …..Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Actually, you cannot download Snow Leopard. You downloaded a Snow Leopard updater. -
....desperating trying to install itunes 10.7, but it asked me to install Mac OS X 10.6.8. I did, but then it said that I needed to install Java for Mac OS x 10.6. I did that and now it keeps saying 'this update requires Mac OS X version 10.6??
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Actually, you cannot download Snow Leopard. You downloaded a Snow Leopard updater. -
I need to download this: (http://support.apple.com/kb/DL788) because my macbook wont turn on unless its charged. I did all the resets like VPRAM, SMC, and I forgot the other one.
My pack thingy is 0002 and it says that if its 0003 then you dont need the update but I do need the update.
I get this error:
This update requires Mac OS X Tiger 10.4.11 or newer or Mac OS X Leopard version 10.5.6 or newer.
I purchased the battery in December. It worked fine but now its happening again! Please help! Its annoying and the nearest Apple store is 2 hours away!Please help me!
-
Printer Update 2.16 Killed Wireless Printing on my Epson SX600FW
I have been using an Epson SX600FW for several years and I don't remember having a problem with it until I recently allowed Software Update to install Printer Update 2.16 and since then I have been unable to print via wireless. I can still print via USB but I won't bore you with how much of a nuisance it is for me to have to do this but it is a major pain.
When I try to print via wireless, everything looks normal until after the document has spooled and then the printer window simply says 'looking for printer'.
In Preferences, the printer looks OK with a small green circle next to it but in the printer's utility, it states that the printer is not responding even though it gives ink levels.
I have tried installing the drivers from Epson's site - they are dated 2008 so I doubt they are the latest but they didn't work anyway. Even after that, Software Update doesn't seem to think that the old drivers need updating.
I have read on here of other people's problems with this update not just with Epson printers. Is there any way to revert to how my Mac was a week ago without doing a full Time Machine restore?
I'm pretty annoyed that an update has broken something which has worked for years.I have a solution
I have a workforce 850 but encountered the same problem. Here's the steps I took to fix:
Went to the printer. and printed a network connection report. (the printer should of course be connected to your wireles network). Obtain the IP address
Turn off the printer.
Go to Apple menu (upper left on desktop) > System Preferences > Printers & Scanners. Delete the print queue and remove the printer by clicking on the button under the list of printers. Click OK to confirm the removal.
Press the CTRL button on the keyboard and click on the white box on the left (where the printers should be listed) and click on Reset Printing System. (Note: This step deletes all installed printers on the list. You will need to re-add all printers installed on this computer)
Turn on the printer. Click the button. The system should automatically detect the printer. Click the Add button and try to print.
If the printer doesn't show after the Reset, click the IP tab and enter the IP address obtained in step one
Your printer should now show on the USE pulldown menu. Click Add and try to print
Maybe you are looking for
-
How do you add an application event to the Applications Panel
How do you add an application event to the Applications Panel. My previous post referred to .ashx files, and the problem seems that Firefox, by default, does not recognize a .ashx format being read by Adobe Acrobat. Therefore there needs to be a way
-
How can I download or buy recovery disk for my hp pavilion dv2500s/n 2CE727216L
product name and number : hp pavilion dv2500s/n 2CE727216L operating system windows vista my wife try to repare a small problem she format all the hard disk including recovery partition
-
HP Digital Stereo Headset Not Detected
Recently my HP Digital Stereo Headset (Model) VT501AA stopped being detected by my HP ENVY m6 Notebook PC after upgrading from Windows 8 to Windows 8.1. I have tried plugging the headset into all four USB ports on the notebook with negative results.
-
Will SPFILE='+DATA/mydb/spfilemydb.ora' be overwritten?
Hi there Env: Oracle 10gR2 + ASM - RHEL 5.8 64bit The database is on ASM, I created pfile using "create pfile='pfile_name' from spfile". I modified the pfile and then started the instance using "startup pfile='pfile_name'. Now if I issue "create spf
-
Deploying Oracle Forms on mobile device
Hello folks, I would like to know how we can deploy Oracle Forms on a mobile device using ORacle 9iAS ? Thanks