Printer will not print but will scan and photocopy HP Photosmart B109n-z

Hi
When I go to print a document I keep on getting the message error - printing, we are using the printer on a wireless network
Don't know if this has anything to do with it but installed the new BT Home Hub 3 yesterday had previously the BT Home Hub 2 and put in 2 new cartridges otherwise nothing else has changed
I will be very grateful if anyone can help me out here
Regards
Iain
This question was solved.
View Solution.

You will have to re-connect your printer to your new BT Homehub. In the HP folder in your Programs, run the Printer Setup and Software program to re-connect it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Printer will not copy but will print from the computer

Hp Photosmart D110 all in one printer--I am totally disgusted with this printer...have had it a few months. It will only get about 160 economy pages per ink cartridge which is ridiculous. So we bought an ink refill kit and just refilled and reinstalled the black ink cartridge. it is printing from the computer just fine but the printer WILL NOT COPY. When I use the tool box and check ink levels it just shows question marks on both ink cartridges.
I spent 45 minutes on HP Chat Support and got no answers except that I need to use genuine HP Cartridges. They could not explain to me why the printer would print but not copy with refilled cartridge.
Any help from any of you regarding the NOT copying and the ink cartridges.....thanks so much

Did you ever get it to copy? I have the same problem

My recorded footage without sound will not play, but will when recorded with sound, any ideas?

Hi there community!
I have recorded alot of footage on a digital Harinezumi 3 camera and have run into a problem in post production.
Some of the footage is recorded with sound, and plays fine. However, with most of the footage, i chose to turn the recording of sound off. These files without sound will not play in any player, even when Perian is installed.
These are the specs of the video I have been able to find out.
File type: .AVI
Video Stream: JPEG
This is all I can find out, so I am thinking it is an M-JPEG file rendered as an AVI file. VLC player says it can not play the video or audio format 'undf', whatever that means. Another player says it needs a .moov encoder, but I do not see how this is possible. I have also tried attaching audio to it via Logic 9 with no success.
I am at a loss, and I really need this footage for a project. Any ideas?
Thanks for any help!!

It won't let me post the video in the forum, so here is a link to it in dropbox.
https://www.dropbox.com/s/k4nz8mg18p4thzd/Mountain%203.AVI?n=145237283
Accessed the file at dropbox. Played the DropBox "display" file in scripted player, played the same resource file using the Safari plug-in, and then downloaded the resource file using the QT 7 Pro "Open URL" option only to learn that this file was an H.264 transcode and not your original file. Used the DropBox download option to download the original Motion JPEG file in AVI file container. File plays as is in both QT X v10.2 and QT 7 v7.6.6 players under Mountain Lion v10.8.4 on my system.
Motion JPEG is one of the "lagacy" codec components turned off under Lion and which remains turned off under Mountain Lion. However, as I understand it, Motion JPEG files are supposed to be passively supported (playback supported) under these systems but requires the codec to be turned back on if you wish to export files using this codec. I turned both Motion JPEG and Motion PNG codecs back on quite a while back and have Perian installed which, as you can see, supplied the OpenDML version of the Motion JPEG codec component to actually play your file on my system. Unfortunately, since QT uses a LIFO codec component list generation strategy, I would have to remove Perian to test whether or not the system configured Motion JPEG component would then become the active decoder. (Did this a year or two ago but not willing to do so again at this time.)
Suffice it to say, the file should play in QT on your Mountain Lion system assuming the correct version of Perian is installed, it is actually active, and you have no conflicting software or hardware installed on your system. Have posted an MOV file containing your Motion JPEG video data in case you want to see if it will play correctly on your system.
http://downloads.walker4.me/downloads/Temporary_files/Mountain%203.mov

Ipod internet will not work. but my computer and other devices work

It shows that i am connected to the internet, yet it wont load any sites. It will load google. But when i go to click on a site, it'll either pop up as safari cannot open because your ipod touch isnt connected to the internet, or a server issue. Every now and then it will work, but then after a minute it will just go back to its old ways.
I've tried reconnecting and connecting the wifi on the ipod
I tried to reset network settings.
I've turned my modem on and off.
Again, it may only work for a couple minutes or so, but then itll just go back to its old ways.
My laptop, phone, and other stuff works on the wifi, I am only having the problem with the ipod.
Facebook and instagram app works also. but safari isnt

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Firefox installs, verifies extensions then becomes stuck, no will not open but will show on processes

Installed firefox 4, it installs fully then when I go to launch it, says that it is verifying extensions. Application times out and forces close, now when i try to open it, it won't load however it is showing in processes taking up a good bit of memory.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>

Outlook13 with 8.1 will not send but will receive email

I can receive messages but get an error when trying to send email... I have a private domain email (not gmail, yahoo, etc.).. server is network solutions....
they wanted me to pay for tech support , so did microsoft... there has to be an easy fix... My old xp computer with outlook works fine with the same settings...

Hi,
In order to resolve the issue more efficiently, I'd like to collecting the following information:
What error message did you get when sending email?
Do you have a webpage interface? Can you send email from there?
When did this issue happen? Does your email account ever work when configured in Outlook 2013?
How did you set your email account in Outlook? Via POP3, IMAP or others? You should contact your provider and make sure you have enter correctly in the "Outgoing server (SMTP)" field.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Iphone 4s will not charge, but will say its charging

when i plug in my phone the lighting blot comes on by the battery symbol, and it vibrates saying it is charging but it doesnt charge. ive tried plugging my phone in my dock and with my USB cord and computer. any ideas?

Hello there, PookieMay.
The following Knowledge Base article provides some great steps to review for troubleshooting charging issues with your iPhone's battery:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Time machine will not backup but does restore

My Time machine will not backup, but will restore from prior backups - the last made three months ago (end of January). Can anyone help? When trying to run a backup the screen shows:
Select Disc (which I have already done)
704 GB of 1 TB available
Oldest backup: none
A continuosly revolving progress bar
"Preparing Backup"
Note that when I run Time Machine in order to restore, all backups prior to Jan 30th are there.
I am running OSX Mountain LIon Version 10.8.3

Mickmannock wrote:
I followed the proceedure described to delete /Library/Preferences/com.apple.TimeMachine.plist. However I note that there are very many versions of this file in other locations.
There shouldn't be. Delete any others.
Make sure the one you deleted was in your top-level /Library folder (not the Library folder inside your home folder). If you got the right one, when you went back to the Time Machine Preferences window, it should not have shown your TM drive or anything else.
I am running Parallels 8 and windows 7 in a Virtual machine, but these do not appear to have created problems in the past - over two years now.
You probably should exclude the VM files from Time Machine backups. That shouldn't be the cause of much of this problem, but may be a problem in the future. The reason is, to OSX, a VM file is one huge file -- if anything at all is changed, TM considers the whole thing changed, and will back it up again, taking time and lots of space on your backup disk.
Have you Verified your internal HD, and Repaired any other disks being backed-up, and your backups, per #A5 in Time Machine - Troubleshooting?
What are you backing-up to (external HD, Time Capsule, etc.)?

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture.
Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?

As far as I know, you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows 8.1 and officejet 6110xi - Will not print but scans okay?

Today Jan 5th, 2014 installed Windows 8.1 on my dell desktop.
Now the HP officejet 6110xi will not print.
The scan mode seems to work.
I have tried all of the HP work-a-rounds but no luck!

Hi kmwenman,
Is this issue happening on all 4 machine that you have installed the Officejet 8620 on?
Please download and install the HP Print and Scan Doctor and let me know the outcome of each test performed. Please run this on all of the computers the printer is installed on if the issue is occurring.
You will see a wrench, a yellow exclamation mark, a red X, or a check mark next each tested item.
Click here to download and run the utility > HP Print and Scan Doctor
Is the printer connected directly to a wall outlet or a surge protector? (It is best to connect directly to the wall)
Do you have any other HP Printers installed on these computers? If so, do you still have the printer(s)?
Is this an HP laptop or a different brand?
Are all the computers running 8.1?
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet 4360 e-All-in-One Series - Will scan but will not print

So I have installed my new wireless printer and it will scan, both on USB and wireless, but it will not print. During the install process, at the very end of step 3, it says that it can't find an internet connection then prompts to copy a URL for completion of install online. The link takes me through the same install process.
When trying to print there is an error that says that it will not print due to a problem with the current printing setup. HP Print and Scan doctor lists all ok. The internal print test page works but the test page doesn't. It then prompts reinstall. So far I have tried:
Reinstalling
Reinstalling after running disk cleanup
Reinstalling after with firewall turned off
Changing to a standard TCP/IP port
The problem is the same whether on USB connect or wireless.
I am about to throw this thing out the window. Any ideas to save its life?

Hi @gesus,
Welcome to the HP Forums!
I understand that you can scan but not print with your HP Officejet 4630, on Windows Vista. I am happy to look into this printing issue for you!
Are you able to make copies? Copy Text or Mixed Documents.
In the meantime, I would recommend to go through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows Vista.
Let's start with that guide, and we will go from there!
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

LaserJet Pro Scans, prints test page but will not print from a file

I installed a LaserJet Pro200 MFP M276nw on my wife's Toshiba Satellite (Windows 7 64Bit OS) laptop yesterday (Printer is brand new out of the box). I installed with a wireless connection. It will print a test page and also scan wirelessly but will not print from a file i.e. a PDF. I installed it on my HP Probook this morning and it works fine. Any suggestions would be appreciated. The thought of paying Geek Squad 75 bucks rubs me the wrong way, especially since i just paid them 100 for an extended warranty. Thanks!

Welcome to the HP Forums JBottensek,
I see by your post that the printer won't print a PDF document from the one computer.
I can help you with this issue.
I have provided a document to go through the steps which should resolve this issue for not being able to print PDF documents. Cannot Print PDFs from Adobe Reader.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP 7280 all-in-one says ink cartridges are empty and will not print from PC, but it copies fine.

Replaced 2 ink cartridges in hp 7280 but still says both cartridges are empty and will not print from PC, but it will copy fine. When I try to print I get a error box that says "Ink cartridges empty - replace black and yellow ink cartridges to continue." They are brand new - just bought them - expiration date Sep 2015. Have tried rebooting and disconnecting and reconnecting everything. Same error, but it still will do color copies fine - all cartridges are working. Help?!

Hi tfmartin,
I understand you have a Photosmart C7280 that you are unable to print to from your computer. I'm sorry to hear about this, but I will certainly do my best to assist you in resolving this issue.
Before I can offer any suggestions I do need to know which version of Windows or Mac that you're using and how the printer is connected (wireless or USB). Once I have that information I should be able to help you better. In the meantime, if you're using Windows, please download and run the HP Print and Scan Doctor to see if it can assist with the issue at hand
Hope to hear back from you soon! Have a great day
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

My payslip gets emailed to me and opens with fire fox , i can not print it out have tried saving to doc but still opens will not print

my payslip gets emailed to me and opens with firefox , i can not print it out have tried saving to doc, but still opens with firefox and will not print.
The server i have to use for my pay is Explorer( i told them that this would have conflicting things on my computer, they said no i wont.( i can get it just can not print it?)

Hi there morinallen,
Try downloading and running the print and scan doctor located here to ensure there are no software conflicts:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?

Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?

A few suggestions for you:
Try:
uninstall all HP utilities or other HP apps on your Mac
see if there is updated software on the HP website
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
Do a factory reset on your printer
go back to printers & scanners and it should see your printer and download a driver for it from Apple

Printer will not print but will scan and photocopy HP Photosmart B109n-z

Similar Messages

Maybe you are looking for