Printer will only print 2 pages then say error - windows 8

Hi,
we have purchased a new laptop to make life simpler, only things never end up being that way. Currently we are having trouble printing more than 1 page, the computer on the second page half way through will bleep and an error message will be displayed in the top right corner but there is no error code.
Please help as this is increasingly annoying,
i have seen other posts where they are being asked to disable some start up programs but i have tried some and this hasnt work i will show a screen shot below to show what s still enable and maybe you can advise which must remain and what others can be disabled.
Please please help
Thanks in advance

mzgjrule
Welcome to the HP Community Forum.
You are right -- this is supposed to be better.
The problem may not be the computer -- it may just be a buggy-bit.
HotFix:
A wireless, high-quality print job to a WSD port is automatically canceled on a Windows 8.1 computer
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Similar Messages

My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

my hp 100 mobile printer will only print one page then quits. will not print all of the pages. i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

Hello colt1,
Are you using Bluetooth or USB cable to connect to the printer? Did you install from the disc, or from the online program? When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Printing Problem Pages- When printing, once I have confirmed the printing settings, the Proccessing Page Hangs, and then Pages begins to freeze, and then says Error While Printing.

Hi there, I wonder if you can help me,
When printing, on Pages 09, once I have confirmed the printing settings, the Proccessing Page Hangs, and then Pages begins to freeze, and then says Error While Printing. ScreenShots are below.
Thanks for your help, in advance.
Then......(after it has frozen, for about 2mins).....
Cheers!

IS
Do you have the same problem with printing from other apps, such as TextEdit? Have you looked at your printer's control panel to see if an error condition is displayed there, and if so, what is it?
Jerry

I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

Hello Lcw2610,
I would recommend deleting the affected movie from your iPad, and redownloading the movie.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Download past purchases
http://support.apple.com/kb/HT2519
If the issue persists, please do report the issue to the folks in our iTunes Store.
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

I have a MacBook Retina, and it won't upgrade to the new software (OSX Maverics). It will begin to download, but then say it can't finish the download. What should i do to fix this problem?

I have a MacBook Retina, and it won't upgrade to the new software (OSX Maverics). It will begin to download, but then say it can't finish the download. What should i do to fix this problem?

Your problem is really with "Time Machine", backup software included with OS X since version 10.5, not with your Time Capsule router. For more information on Time Machine, check these Web pages:
Time Machine FAQs
Time Machine Troubleshooting

My itunes wont download the newest ipod software and when i try it will download for maybe an hour then say "error has occured, internet connection timed out" now what do i do?

My itunes wont download the newest ipod software and when i try it will download for maybe an hour then say "error has occured, internet connection timed out" now what do i do?

Disable your firewall/security software, then try again.

My ipod touch will not restore backup files, it gets to 4 mins then say error occurred (-1),I have restarted my pc but no joy.

My ipod touch will not restore backup files, it gets to 4 mins then say error occurred (-1),I have restarted my pc but no joy.

I would next try restoring from backup.

My FCPX boots up and then says restoring windows and stays there and never completely boots. I've tried everything. Any thoughts?

My FCPX boots up and then says restoring windows and stays there and never completely boots. I've tried everything. Any thoughts?

Please state what you have tried - there's no point in people here wasting their valuable (own) time trying to help you, only to find you've already tried what they are suggesting.
Have you tried trashing your preferences?
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
With Preference Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
If you trash them and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then if they get corrupted you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
Can't guarantee it, but it's worth a try.
If that doesn't work, move your projects and events (if you have any) to new folders so that FCP X doesn't find them, then relaunch the application. If it launches OK, there's a very good chance one of your projects or events is corrupt or one of the files in an event is corrupt.
Quit the app, then move one event or project at a time back to the original folder and launch FCP X agian - keep going until you find the cause.
Andy

I have been trying to rent movies on my atv they try to load and then says error try again later

I have been trying to rent movies on my atv they try to load and then says error try again

What is your actual internet speed? www.speedtest.net

HT4571 I have been trying to add data to my I pad and when I add it it goes to a page that says error. Is there another way to add data?

I have been trying to add data to my I pad and when I add it it goes to a page that says error. Is there another way to add data?

The installer is over 5Gb's and could take many hours to download.
Check the download status in the App Store application.

PLW NTR prints one page, then a blank, and stops

I have a dependable 18 year old Personal Laserwriter NTR printer which has been running with a Dell running Windows XP for a couple of years. The printer is connected via a parallel cable to the computer. The printer has suddenly started printing only the first page of a multi-page document, then prints a blank and stops printing while the top light on the printer keeps flashing. However, if I open and close the feeder door, the next page and a blank will print, and the cycle repeats. Thinking that the printer driver "broke," I deleted the printer control program from the control panel and installed a new copy of Apple Personal LaserWriter NTR v2010.129 from the XP program. No change in the status. I have used Word, Excel and Wordpad with the same results. Any ideas as to the problem and how to correct? Thanks

This should help you out...
http://www.fixyourownprinter.com/kits/Apple/K53
Sometimes sticking solenoids will cause this issue too, but if it were mine, I'd install the kit I mention above first, and see if that fixes it.
Let us know how you fare.
Cheers,
Jason

Printer prints one page, then stops

I've had my printer for several years. Now, when I try to print a multiple page file, it prints one page and stops. I have to print each page individually. It never used to do this.

Hey , Thank you for posting in the HP Support Forum. I understand you're encountering a partial print job issue when using your HP LaserJet Pro CP1025 Color Printer. I would like to help. Firstly, I recommend you run the HP Print and Scan Doctor for Windows. You can click here to install. This utility might find and fix whatever's ailing your setup. Additionally, if this approach doesn't help, I suggest working your way through the steps listed in this article from HP. It should help rule out potential print queue issues. Lastly, it won't hurt to clear out your temp files as directed below: Clear Temp Folder: Open your Start menu and in the 'search programs and files' box type %temp% and hit enter.When the Temp folder opens select Ctrl + A at the same time on your keyboardOnce everything is highlighted in the Temp folder select 'Delete' on your keyboard to delete the files within the Temp folder. No files and folders on your actual computer will be removed. This will only delete Temporary files. If a file is still be used by a program on your computer you will get the pop up to 'skip' the item.Once the Temp files are deleted close the windowOn your Desktop, right click on the Recycling Bin and select Empty Recycling BinPlease let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thanks again for your post and have a great day!

MF8580 prints two pages, then gives paper size and settings mismatch error. Help!

Hello, I have been dealing with this problem for weeks now. When i called support, they told me it was my computer, that it was "running slow" and that i need to pay for their service - that fixing errors in my registry would fix the problem. However, i have my own registry cleaner and that isnt the problem. Every time i print something, the printer will print the first two pages, and then beep, giving me the error "paper size and settings mismatch Drawer 1" - I have everything set to letter - in the driver, on the printer, etc. I do nto understand why it prints two pages and then tells me there is a mismatch. If i open and close the drawer, it will print the second page again and then the third page, and give me the same error again. rinse and repeat. This also happens when multiple documents are spooled. I send three - one page documents, it will print the first and second, give me the error, i open and close the paper drawer 1, then it prints document two and three - then gives me the same error - i open and reclose and it prints the thrid document... I am just baffeled.

Hi!
To ensure the most accurate information is provided, we will need to know the version of Windows or Mac in use. Also, we wanted to mention that it sounds like the number you reached was not an official Canon support number, as we do not charge for support. If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Problem with printing the pages due to main window

hi experts ,
in my requirement i have 4 pages in smart form.It takes quotation number as input and dispaly all the contracts.
1 potrait
2 potrait
3 landscape
4 landscape
i have used a main window in the second page contains 2 windows for printing address then
one main window for printing contracts, and systems info in two tables .
i have used a main window in the 4 th page too for printing some item details equipment list.
both main windows having same width.
i am getting 1 st & 2nd pages only as o/p if i mention 2nd page in the next page field of first page .
i am getting 1 st 3 rd , 4th , 5th ........pages if i mention 3 rd page in the next page fileld of first page .
i didn't use any extra page to populate if 2nd page is filled completely .
please guide me .
Thanks & regards.
Srikanth

Hi Srikanth,
In the second page you can insert a command to set it to goto page 3,and an additional event in the command (only after the end of main window).
As soon as the main window ends in the second page...u will get the third and rest of the pages.
Keep the goto next page in PAge 1 as Page2
and in Page 2 as Page 2.

I recently bought and downloaded an album and most of the songs will only play half way then stop can i do anything about this?

i bought the album Attack! Attack! by Attack Attack and most of the songs will only play halfway then they will just go silent i have tried contacting apple about this but have found no real topic on their site to do with this problem and there seems to be no email address for support that i can find can an of you help me?

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to close and restart iTunes.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Printer will only print 2 pages then say error - windows 8

Similar Messages

Maybe you are looking for