Printer windows; how to close upon completion of printed job?

Whenever I print a job to one of the 4 printers I have set up in Leopard, a window appears on the dock for that printer. In OSX 10.4.11 this also occurs, but closes automatically on completion of the job; Leopard leave it on the dock. I have a full dock, so this creates an ever shrinking dock, and I would like it to close when finished. How can I set up Leopard to do this?

When you next do a print job CTRL- or RIGHT-click on the Dock icon and select the option to close the printer upon completion from the contextual menu.

Similar Messages

  • Download Window Does Not Close Upon Completion of Download

    I download a file, the Download Window opens, and asks where I want the file (I set that Tool-Option), but when it is done, the window does not close, even though the Option is set telling it to close when the download is complete
    == This happened ==
    Every time Firefox opened
    == prior to last update

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can try to reset the preferences to see if that helps.
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Terminal window: how to close it ?

    Hello, everytime i switch on my macbook the Terminal window appears on the dock, it opens and it stays open. It all started 2 months since then it happens everytime. It is automatic. So i do switch it off ? how do i make sure that it doesnt open anymore when i switch on my macbook ? thanks for the help folks

    thanks Niel but it didnt work out. Control-click did nothing and same goes with preferences account which had marked just ituneshelper. Below what Terminal write at login
    macbook-di-andrea-zaccardi:~ andreazaccardi$ /System/Library/Frameworks/JavaVM.framework/Versions/A/Commands/java ; exit;
    Usage: java [-options] class [args...]
    (to execute a class)
    or java [-options] -jar jarfile [args...]
    (to execute a jar file)
    where options include:
    -d32 use a 32-bit data model if available
    -d64 use a 64-bit data model if available (implies -server, only for x86_64)
    -client to select the "client" VM
    -server to select the "server" VM
    -jvm is a synonym for the "client" VM [deprecated]
    -hotspot is a synonym for the "client" VM [deprecated]
    The default VM is client.
    -cp <class search path of directories and zip/jar files>
    -classpath <class search path of directories and zip/jar files>
    A : separated list of directories, JAR archives,
    and ZIP archives to search for class files.
    -D<name>=<value>
    set a system property
    -verbose[:class|gc|jni]
    enable verbose output
    -version print product version and exit
    -version:<value>
    require the specified version to run
    -showversion print product version and continue
    -jre-restrict-search | -jre-no-restrict-search
    include/exclude user private JREs in the version search
    -? -help print this help message
    -X print help on non-standard options
    -ea[:<packagename>...|:<classname>]
    -enableassertions[:<packagename>...|:<classname>]
    enable assertions
    -da[:<packagename>...|:<classname>]
    -disableassertions[:<packagename>...|:<classname>]
    disable assertions
    -esa | -enablesystemassertions
    enable system assertions
    -dsa | -disablesystemassertions
    disable system assertions
    -agentlib:<libname>[=<options>]
    load native agent library <libname>, e.g. -agentlib:hprof
    see also, -agentlib:jdwp=help and -agentlib:hprof=help
    -agentpath:<pathname>[=<options>]
    load native agent library by full pathname
    -javaagent:<jarpath>[=<options>]
    load Java programming language agent, see java.lang.instrument
    logout
    [Processo completato]

  • PSC 1350 all-in-one not completing print jobs wirelessly with windows 7 64 bit

    I have a acer 5542 running windows 7 (64bit), connected wirelessly to an Orange Livebox hub, to which my HP PSC 1350 printer is connected (via USB cable) therefore using the Livebox as a USB printer server. This configuration has worked very well for my 2 XP laptops for the past year or two. I set up the printer on the windows 7 laptop by connecting it directly, via the USB cable, letting windows install it, and download the latest drivers, (although HP say they have no specific 64bit drivers for this printer, but the drivers they have, and that windows downloaded, work fine!) then i changed the port to the livebox ip address.
    All this worked fine (as on the xp machines), I printed out a spreadsheet, which worked fine untill it approached the end of the page, then just stopped. I troubleshot the printer which didnt return any sprcifics, Just that the print job had failed, and that it had rectified the problem, then the printer starts reprinting the same document, to the same point, (about 95% complete) and again stalls, and so the cycle continues. I have tried it with various different documents and photos, to the same ends. But if i connect the laptop directly to the printer, via USB, it completes the jobs fine
    I have posted on microsoft answers forums, but the one answer i have recieved (re installing everything) did not solve the problem. Although i am not too savvy on computers, i kind of get the feeling it is a spooling issue. (not processing or holding onto the last part of a print file! But its only a feeling!)
    any help would be very much appreciated

    Hi there,
    I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
    At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • How to close programaticaly  IE window which FileDownload opens ?

    Hi there
    I have popup with FileDownload control on it. Clicking the link(FileDownload) system opens IE window with small "Download" window (open,save,cancel).
    The question is how to close programmatically this IE window after download (or open) is complete ?
    I don't want the user to have to do that manually ?
    Thanks

    Stefan,
    Have you set "attachment" type for your binary resource?
    If you are using NW04s (7.00) then make sure you specified:
    final IWDResource resource = <...>;
    resource.setAttachement( false );
    If you are using NW04 (6.40) then:
    final ISimpleTypeModifiable mtype = attr.getModifiableSimpleType();
    final IWDModifiableBinaryType btype = (IWDModifiableBinaryType)mtype;
    btype.setMimeType(
      new WDWebResourceType("xls", "application/vnd.ms-excel", true/* is Attachemnt */)
    Valery Silaev
    SaM Solutions
    http://www.sam-solutions.net

  • How to close the window openned by System Exec VI automatica​lly?

    Hello,
    I am using System Exec VI to lauch an exe file built from a LabVIEW program. When running System Exec VI, the window of exe file pop out and stays there even after all tasks are completed. I have to close it every time manually. Anyone here know how to close the exe file window automatically when it's done?
    Thanks,
    Jean
    Message Edited by Jean_CLD on 03-25-2010 11:25 AM
    Message Edited by Jean_CLD on 03-25-2010 11:29 AM
    Solved!
    Go to Solution.

    If I understand the question correctly you need to add an invoke node at the end of your application to exit. Depending on the whether it is running as a stand alone application or within LabVIEW it will either exit or stop execution. I've attached the VI I use in my applications.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot
    Attachments:
    Exit application.vi ‏13 KB

  • How to close safari window in iPad?

    I upgraded iPad2 to ios5 and Safari is configured differently.  I can't see how to close an open URL.  Previously, you could touch the little open book that had the number of open windows, and a screen with all the open windows opened.  You could just click on the x in the corner and the URL would close.  Now the open URLs are listed across the screen, and little open book shows no numbers and when you hit it you get History.  So, how to close a URL? 

    You can't close it as such, but you should be able to get it to re-open with a blank tab by first clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
    And then close Safari completely : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    When you re-open Safari you should, hopefully, just have a blank tab.

  • I get a message that says ff is already running but is not responding ,to open a new window, you must close the existing ff process or restart your system, how do i close the existing ff process?

    I have windows 7 on dell laptop. I am working on a Word Document and want to go to a diff window for some information. I click on the FF icon on my desktop and get a message that says...FF is already running but is not responding. To open a new window, you must close the existing ff process or restart your system..how do you close the existing ff process?
    == This happened ==
    Every time Firefox opened
    == I got my new dell laptop four weeks ago with window 7 installed

    See https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding

  • How to clear completed print jobs in Leopard?

    It is possible to clear completed print jobs in Tiger but I couldn't find it in Leopard now. I have a DELL 5100.

    Andre Marion wrote:
    I have the same problem here. Sure you can use the "hide completed jobs" but that's not the point. The Delete job menu selection should do what it says it will but it doesn't.
    Everyone has this problem. The workarounds given above are exactly that, workarounds.
    This is a bug. If you say delete something and nothing happens (not even a warning telling you that you can't delete this item) then it's a bug.
    OK, it's a bug. No one disputes that the Delete button not working is a bug.
    As for going into the CUPS admin interface, that is way over what a general user should have to do. I know how to do that, but the point of using a Mac is that I shouldn't have to do such things.
    This is debatable, but what's wrong with learning something new and having another workaround until Apple gets around to fixing this?
    This needs to be fixed.
    Submit feedback to Apple about this issue, but they are probably already aware of it since it has come up before.

  • HT1349 I have icloud on my pc with windows vista.  Recently, upon startup I receive an error that says applephotostream.exe has stopped working.  Windows will close this problem . . . any suggestions.  I tried to download the control panel again. no luck

    I have icloud on my pc with windows vista.  recently, upon startup I get a message that says applephotostream.exe has stopped working.  Windows will close this program  . . . I tried re-installing the icloud control panel, etc.  to no avail.  any leads?

    Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

  • How can I get my trash to empty?  Window opens but closes immediately.

    How can I get my trash to empty?  Window opens but closes immediately and there are nearly 9000 items there.

    Hold your click a little longer on the Trash in dock and a popup will appear. Choose Empty Trash.

  • How to close a popup window for system events?

    Hi,
    I have a screen 110 which shows several input field in popup mode.
    The Cancel button can close the screen.
    But my question is how to close the popup window for the following system events?
    1, Customer clicks the cross button in top-right corner
    2, Customer clicks the system icon in top-left corner and then select either: "Close" or "Stop Session"
    The PAI subroutine of the screen has not been triggered for the above system events.
    Thanks for the coming help.
    Best Regards,
    David

    Hi Siddharth,
    I did check with another very experienced ABAP developer.
    The solution was the same as what Arunima Rudra provided.
    And I got a sample program which did work properly.
    The headache is that the system events in my program still cannot be triggered even after I have all the same changes.
    Anyway, I suggest you to try the solution as provided by Arunima Rudra.
    It should work for 2 system events:
    1, Customer clicks the cross button in top-right corner
    2, Customer clicks the system icon in top-left corner and then select either: "Close"
    For "Stop Session", it should not be handled by popup.
    You can observe the same behavior in ALV sorting configuration popup.
    Good luck!
    Regards,
    David

  • New firefoxis great. i keep many windows open. in ur earlier ver. I used to close it, it would ask for save and shut down as one of the three option,but in this new version it close all my window, how do i save my window tab?

    new firefox is great. I usually have many windows open. in your earlier version, when ever I used to close it, it would ask for save and shut down as one of the three option,but in this new version it close all my window, how do i save my window tab?

    See [[Firefox does not ask to save tabs and windows on exit]].
    Does this work for you?

  • How to close the main window  from Popup

    hello all,
    i need to close the main window from a popup, so i create a popup and after clicking on close button of this popup, should also the main window be closed.
    how can do this please?
    BR

    Hi
    Please go through this.. check thomas reply
    Re: Close Main Window directly on action on Pop up window
    also check this..
    how to close main window on click of a button on popup window
    cheers,
    Kris.
    Edited by: kissnas on May 12, 2011 5:06 PM

  • How to close a window in a jsp page ??

    Hi........I 've created an application in JSPDynpage.
    In my JSP Page i've a close button .On click of the "close" button , the window has to close.
    How can i achieve this .
    Please provide me some solutions.
    Thanks
    Smita

    Hi Paul,
      Check this thread.
    close main application window in WD for Java
    Regards,
    Harini S

Maybe you are looking for