Printer Wirelessly to an HP6110 via Airport Extreme

I have tired to print via the USB port on the Airport Extreme to an HP6110.
Distrubute IP addresses is turned off and I've tired the LAN and WAN ports.
Other than completely reconfiguring via the Airport Setup Assistant, what could I be missing?
Thanks in advance for your help!

Check out the tips here:
http://www.ifelix.co.uk/tech/1013.html

Similar Messages

  • Can't print from iPad to HP via Airport Extreme (5th gen)

    I have an HP Deskjet 5900 connected to an Airport Extreme (5th gen), via the USB port. I'm currently running 10.6.8 and have succesfully setup the printer such that I can print wirelessly from my MacBooks, as well as directly from my MacPro desktop (which is connected to the AEB through the network).
    What I can't do is AirPrint from my iPad or iPhone.
    I've skimmed through quite a few questions on here, but haven't come across this specific scenerio. The closest one refers to printers that are AirPrint compatible, but I believe that only applies to wireless printers that are being connected on their own (without an AEB).
    I really hope I don't have to download an app for this... it's built right into the iOS!
    Thanks for the help.
    Stephen

    To use AirPrint directly from your iPad, you will need a printer that is AirPrint-compatible. Currently, the HP Deskjet 9500 is not one of them. There a few workarounds, but they will require obtaining an App.

  • Printing wirelessly to MacBook Pro with Airport Extreme Base Station

    I have an Airport Extreme Base Station that I used to use wirelessly until I got Verizon Fios. The Fios technicians said the base station couldn't be used and so it's been sitting unused for a few months. However, I really, really miss printing wirelessly, and was wondering if it was possible to use the Airport Extreme Base Station ONLY to print wirelessly, and not connect it any way to my internet (I don't want to mess with any of the fios stuff at all).
    If it's not possible, is there any other way to print wirelessly without purchasing another product or special printer. I have a HP c4480 printer.
    Thanks!

    If your printer has a USB cable the easy way to go about this in my opinion is to plug that USB cable into your Extreme base station. I have the Extreme ABS that looks like a flying saucer. I plug the usb cable into the port that has the symbol that doe NOT look like this <--> rather it looks like a Saguaro cactus.
    My computer then sends print documents to the Extreme via WiFi and then Extreme sends them to the printer via the USB cable.
    If your Airport status is not showing in the Mac's menubar go to system Prefs/Network/Airport and check a little box so it will show up in the menu bar.
    Now if your Extreme is plugged in the wall and powered up your Mac should be able to find it. Click on that menubar item for Airport and scroll down and select your Airport Extreme. I don't know for sure what its name will be. It should still be the same as it used to be when you used it last.
    Now try printing a simple document. In the print dialog window you should be able to select what printer you want to use. If your new Extreme printer is listed select it. You may need to click on Print & Fax and figure out how to select it from there, and choose it to be the new default printer.
    I think this info will do the job. Whenever you want to print you have to go to the Airport icon in the menubar and change your airport connection from your Verizon stuff to your Extreme. Then of course you have to change back when you are done. That is why it would be great to toss the Verizon WiFi radio out the window and just plug your Verizon modem into your Extreme WiFi radio transceiver (router). But I understand you cannot deal with that at this time.
    If this does not do the job, if I have missed something, I will bet you 5 bucks that you can still figure it out if you just look at any error messages and/or look at the Print&Fax prefs and the Print dialog windows etc. and see what I may have missed. Maybe you have to go to SystemPrefs/Sharing and allow your printer to be shared. I don't think so. The way I figure any of this stuff out is to just look at stuff and think and try things and see what happens.
    Your Verizon setup should be something like this.... a cable comes into your house and goes to a 'modem'. From there and ethernet cable (CAT-5 cable) goes from that modem to your Verizon router (WiFi radio transceiver).
    As for getting rid of the Verizon router, when you are ready to give it a go, simply unplug the ethernet cable (it has a plug on the end that looks like the kind of plug that telephones use to plug into the wall, except it is a bit wider, but still has that same kind of snap-lock tab) that comes from the Verizon modem (the modem has the heavy round cable and probably many blinking lights) and plug it into the Extreme. Mine has an icon on the Extreme that is many dots in a circular pattern.
    At this point you may have to unplug the Verizon modem form the wall AC power and the Extreme also. Then plug them back in, wait a minute, go to your Airport icon on your Mac menubar, Select Extreme and start surfing the web.
    It really is that simple with a Mac. Maybe Verizon has found a way to make things difficult but my guess is no. Any password should be taken care of in your Airport Setup Utility program. It should be the same password(s) as you used before when you used your Extreme.

  • How can I print from ipad2 via airport extreme to hp printer on USB.

    Is there a way to get iPad2 to print via airport extreme to a non wireless hp printer?

    Apple - iPad - Print right from your iPad with AirPrint.
    Unfortunately, AirPrint will only work with AirPrint enabled HP printers.
    Check the HP site. They may have an app available you can use for your USB / Airport printer.

  • Weird lost access to iMac's desktop via Airport Extreme wireless LAN

    This is weird and complicated. I'll try to keep it simple.
    1. Two computers on a wireless LAN via Airport Extreme: G4 Powerbook and 20" G5 iMac. The LAN has worked flawlessly and seamlessly for several years, and except for this ONE anomaly, still does.
    2. When logged-in to the iMac from the Powerbook, all its files and contents show up normally in it's networked-drive window in Finder,
    3. EXCEPT the desktop. And I mean the real desktop which is under my ID under USERS.
    4. Searching the Powerbook from the iMac, however, works just fine and shows all of the Powerbook's contents.
    Repairs of Permissions on both computers have accomplished nothing.
    There is one other peculiar symptom: there was a .wmv movie file sent me by a friend, and I had a copy of it on the desktops of both computers. It sat there, showed up and ran just fine, until one day something curious happened:
    The file would show up in the column-view Finder window of the iMac's desktop when I opened it from the Finder Window, but would, after about a second, disappear!
    If I try to import, on the Powerbook, some random file into the iMac's Desktop folder, it appears for a brief second and then the folder once again displays as empty.
    I have trashed that wmv file, and yet sometimes its name blinks up on the iMac's desktop list (that is, again, the column view display in the Finder window).
    This is profoundly weird.
    Oh, and there's nothing changed or weird about the SHARING settings. Personal File Sharing is enabled on both computers, as is Printer Sharing, and itunes music sharing is also enabled. All of these continue to work just fine. Firewall is enabled, but always has been.
    Owen

    Well, when in doubt try all the obvious things FIRST!
    I rank Disk Utility from the install disk, did a disk repair, and, well, Bob's your uncle, and all is fine again. Apparently that ghost file screwed up the count of files (I'm not sure what that means, but it seems consistent with a file that would materialize and then disappear, and screw up display of a folder's contents - the folder it was lurking-in invisibly.
    Very peculiar, none the less.
    Owen
    I'll leave this open for another day, if only to see if someone has an explanation for what may have happened, since that might be useful to others, besides satisfying my own curiosity.

  • For 3 years my iMac and miniMac both communicated with a Canon printer and the internet using an Airport Extreme.  Last winter, the miniMac lost printing via the Airpor and now can't communicate with the network at all.

    For three years my iMac and Mac mini were networked via Airport Extreme with a printer and the internet.  More recently, I added an iMac and iPhone.   PROBLEMS:  A few months ago the Mac mini lost its connection to  the printer, and now it cannot locate the network at all. 

    If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
    Use the same SSID and password for both machines. Computers will connect to the strongest signal.

  • Can't print from Win2000 to USB printer via Airport Extreme

    Background: I have an Epson Stylus Photo 820 printer connected by USB to an Airport Extreme base station. My iMac is connected to the base station via an ethernet cable.
    Using Bonjour for Windows 1.0.3, I've set up the Epson printer to print from Win2000 in a virtual machine in VirtualPC 6 which is running in the iMac. The setup process for the printer completed OK, without a hitch. (By the way, I loaded the printer driver from the printer's disk, because the driver for the Epson Stylus Photo 820 isn't one of the drivers selectable from the Bonjour window.)
    Problem: When I try to print via the route that I set up using Bonjour, an error message appears, stating:
    - There was an error found when printing the document "mhtml.mid://00000047/" to IP-extreme986254.local.9100"\
    (Note: extreme986254 is the name of the network I configured in the base station. Otherwise, the network is working OK. Also, my Win2000 in VPC is connected to the internet OK.)
    When I re-try printing, I get the same error message.
    When I hook the printer directly to the iMac by USB and then set it up as a printer for Win2000 in that configuration, I have no trouble printing to the printer.

    Using Bonjour for Windows 1.0.3, I've set up the
    Epson printer to print from Win2000 in a virtual
    machine in VirtualPC 6 which is running in the iMac.
    The setup process for the printer completed OK,
    without a hitch. (By the way, I loaded the printer
    driver from the printer's disk, because the driver
    for the Epson Stylus Photo 820 isn't one of the
    drivers selectable from the Bonjour window.)
    Though for XP should also work for Windows 2000.
    Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
    http://www.ifelix.co.uk/tech/1012.html
    Problem: When I try to print via the route that I set
    up using Bonjour, an error message appears, stating:
    - There was an error found when printing the
    document "mhtml.mid://00000047/" to
    IP-extreme986254.local.9100"\
    Printing from an Windows 2000 PC to a printer attached to an Airport Extreme Base Station
    http://www.ifelix.co.uk/tech/1006.html
    iFelix

  • Printing problems with HP 1012 connected via Airport Extreme - resolved?

    I originally posted on this issue in a long-running discussion on HP printer issues.
    http://discussions.apple.com/message.jspa?messageID=10109788#10109788
    Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
    Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
    Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
    a. I turned off AP on the iMac.
    b. I unplugged the AE base station for one minute+, then re-powered it.
    c. I opened my MBP with 10.5.7. Started up Airport Utility.
    d. I renamed the base station. Left all other settings alone.
    e. I installed the 7.4.2 firmware upgrade.
    f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
    g. I turned on AP on the iMac.
    Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
    Too early to tell if I will have any further problems if if it permanently fixed.
    Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
    Stan

    I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
    I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
    So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
    How to:
    Turn printer on.
    open System pref/ printer-fax/ add printer
    Select hp desktop 5100
    (name: -- Change name if you want - I kept " hp deskjet 5100"
    Location: Your computer
    Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
    Select OK

  • Unable to print or use external hard drives via Airport Extreme

    Hi.
    I installed Airport Extreme with no problems. Airport utility program shows everything is ok, and shows my printer (Canon LBP5100) and my two external hard drives which are connected to Airport via USB-hub.
    My airport extreme is connected to ADSL-router and is providing another WLAN in my house. The internet connection works fine, but I couldn't print nor use my hard drives. I installed the printer using the bonjour guided printer installation tool.
    I haven't heard that my printer would not be compatible with airport extreme so was my airport purchase totally unnecessary or what tricks should I use to make the printer and the external hard drives be available?
    Sincerely,
    Jarkko
    Finland

    Hi.
    Thank you for your reply. No help though.
    Printer gives me this warning:
    The network cable is not connected, or the printer is not turned on. Check these items.
    And still the hard drives are not visible anywhere.

  • Access Hdd/printer via Airport extreme via connecting thru existing network....help plz

    hi...!!!!
    i have got a belkin wifi router and i have been using this for ever but now since i have the Airport extreme i wanted it to connect it to my existing network and access my seagate HDD  wirelessly and obviously printing as well without hooking up any ethernet or any kind of cable to my Airport extreme router....
    is there any possible chance for this????????
    help plzzz
    the reason i cant use cables is beacuse all my printer, hdd and airport extreme, n airport express is in one separate room and the internet modem and the router is in different location.....
    My Airport Express worked perfectly fine printing wirelessly and using air tunes wirelessly through connecting it to my existing Belkin wifi.....but somehow my Airport extreme doesnt seem to be happy with me doing the same process....
    i would appreciate any kind of help i may get.....
    here are some of my screen shots for AIR PORT EXPRESS and AIRPORT EXTREME
    that last bottom pic is that  on airport extreme disk tab i can see my seagate HDD but on a finder i dont see anything..
    help plzz...!!!!!!!!

    sachraj wrote:
    i will try it definitely..but is it even possible to access ma hdd an print wirelessly thru AE without hooking up into any sort of cables???
    I gather you mean hooking up cables to your computer?  If so the answer is yes.  My printer is hooked up to my Airport Extreme through its usb port.  I can print wireless flawlessly.

  • Finder freezes when attempting to access a "shared" external hard drive (wireless via Airport Extreme)

    Finder freezes.   As soon as I click onto my "shared" external hard drive (3TB WD - wireless via Airport Extreme), finder immediately freezes / eternally spinning beach ball (until I restart finder).  Can still access wirelessly on another Mac (not on Yosemite).
    Please help!

    Ok - for a while there, the hard drive would not come up on the desktop - but now on a re-boot of the compter, or if I disconnect the hard drive and re-connect it, a message comes up with three buttons which say:
    Initialize
    Ignore
    Eject
    Sound like the hard drive has died?

  • Cannot print from IMac or Dell Latitude Laptop on Canon MX330 printer via Airport Extreme.

    Trying to connect a Canon MX330 printer to an IMac and Dell Latitude laptop via Airport extreme and having no luck.
    All devices recognize the printer, but when I try to print from the IMac it says that the printer is offline, even though it is not. The printer status on the IMac says offline until I clear the printer queue and then the status goes online.
    When I try to print from the Dell laptop the printer reacts, but nothing prints.
    I have run through all of the troubleshooting in the support section online. Any advice?

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • Win XP does not print via Canon MP970 via Airport Extreme

    OK, I bought a Canon MP970 printer and hooked it up to the airport extreme, changed all of the ports to 10.0.1.1 on my XP, shared the printer, ran Bonjour, ran airport utility, and everything I know how to do. I can print from my Powerbook G4 and from a new black macbook that I just bought on my network. Problem is I cannot print from my windows XP PC. Very frustrating. It did work fine with my HP printer; that is print from my laptops AND my PC desktop via airport extreme. Any help would be greatly appreciated!

    OK, I kept working at it and seemed to have fixed the problem. I finally just redirected the port to a local one "9101"and not the 10.0.1.1 and began working. I am not sure what I did definitively to make it work. And I just installed the latest printer drivers into my PB G4 and new blackbook and worked. I really just need to trash the PC and go with Apple but you know.......wife.....$$$$$, etc....

  • Internet connection via Airport Extreme/router thats not working, why?

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

  • Migrate from minimac (G4) to new iMac via airport extreme

    I have a brand new iMac and I have the latest airport extreme.
    I have my old miniMac and all are linked up through the Airport Extreme.
    I want to transfer all of my old files from my G4 miniMac to my new iMac but the Migration Assistant says I have to use (buy) a firewire cable.
    How do I transfer my files from my old computer (miniMac) to the new iMac via airport extreme?

    sorry to say but its the firewire technique which Migration Asst. uses. It does not migrate over Ethernet.. its actually very simple...
    you put your G4 into target disk mode. You put the iMac into migration asst., attach the cable and the migration (file copying) begins after you chose to proceed.
    The reality is firewire is faster than most standard ethernet anyway... and wireless? it would take an extraordinary amount of time.
    Will
    Message was edited by: Willard Kramer

Maybe you are looking for

  • How do I sync two iPhones with my iTunes and still have different apps on each phone? Do I use home sharing?

    Does home sharing let me have the same iTunes library on mine and my girlfriends phones?

  • VGA display "out of range"

    I searched through the postings, and didn't see anything quite like this. I have a new Mini Core 2 duo and an old Kogi VGA 1280x1024 @60htz monitor. The monitor works fine with my iBook G4, and worked fine with my son's Quicksilver dual 867. When I b

  • How to move all clips over

    Is it possible to move all audio/video clips over to insert a new clip for example.  Right now, I'm highlighting all the clips and dragging them. For the above, is there a way to get more precise by using the keyboard?

  • Can't set up

    I am trying to set up my ipod mini and my ipod has been charging for at least an hour and a half. I installed the cd and on my screen on the computer it has been on a screen that says ipod has been connected please wait while the system recognizes th

  • Finding a DataSource

    In our production BW system, we have datasource 1_CO_PA202PPC1_02 that exist.  This of course is also in out R/3 system.    In our development BW box, this datasource doesn't exist.  I then went into our Development R/3 system in both RSA5 and RSA6,