Printer won't accept print job

i'M HAVING THE SAME ISSUE i SAW POSTED BY mOONRACKER. i HAD TO USE THE DISK TO INSTALL AND followed the instruction. Everyting worked fine and I printed a document. Today, I am trying to print a document and it doesn't show up in the print queue. The help menu prints off just fine.

Hi @KF2 ,
I see that you are experiencing issues printing from Windows 8. I would really like to be able to help you resolve this issue.
If the printer is networked, try the steps in this document to see if it will help. Wireless Printer Prints a Partial Page or Fails to Print All Pages in Windows 8. Start on Step 3 to run the Window updates for KB3000850 and and you might need to continue through the document to setup a static IP address. Select the link for Workaround, to check the drivers installed, you might need to update them in Step 4, #8. Step 3 provides the information for setting up a Static IP address for the printer.
If you are still having issues, download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Feel free to click the Thumbs up button below if this helps.
Thank You. I look forward to hearing from you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

HP 1522nf printing job won't start

Hi:
I have the HP 1522nf. I always leave the printer power on. Sometimes like once a month, the printer job will not start. I can still go into the printer setting website. (192.168.1.x) But whenever I print, the transfer will stuck at about 68.2kb, and just won't print anything. I have a restart the printer, and then everything is back to normal. I also tried to unplug the printer's network, it will print out eventually just right after I unplug it. And then print out a error message saying "syntax error" offending command: --nostringval--. What's the problem here?
I have the newest firmware.
Thanks.
Message Edited by cpthk on 01-15-2009 05:39 AM
Message Edited by cpthk on 01-15-2009 05:49 AM

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter.
Browse down to the print spooler service, right click it and select Properties then click on the Stop button.
Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the job has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I need help. Can LiveCycle PDF Generator accept network print jobs from a PCL only source?

I need help. Can LiveCycle PDF Generator accept network print jobs from a PCL only source?

More information about this game:
The game should generate a random obstacle course for the player. The first column of the grid, however, should consist of all empty pieces, with the exception of the upper left-hand corner, which is the grid location where the player initially resides.
Enter a loop in which the following things happen (not necessarily in this order):
Print the current board configuration. Additionally, a key should be printed describing what each piece is.
Get an action from the user. The player can move up, down, left, or right. Use the following controls: up = 'i', down = 'm', left = 'j', right = 'k'. The player can move at most one block at a time. Of course, if the player tries to move into a spot occupied by an immovable block, the player will not move.
Inform the player whether they have won, or if they have lost (a player loses if they step on a bomb piece).
If the player types 'q', the game should terminate.
I am still stuck on this maze generator stuff.... Please help me....

Officejet 6700 Premium - Pauses print job and won't resume

I recently bought this printer and set it up. It was working perfectly. I unplugged it for a few days when I went out of town. And now, after powering it back on, it won't print anything. It immediately pauses the print job and won't resume.
I checked to make sure it was still set up to my wireless and it says that it's connected. I'm printing from my MacBook.
I have no idea what the problem could be. Not really a techie so please describe solutions in "laymen's terms".
Thanks!

Hi DeniseT,
Welcome to the HP forums!
You have an Officejet 6700 that is paused and won't allow you to resume on your Mac? This techie would be happy to help you get this working again
What I'd like you to try DeniseT is to reset your printing system and then re-add the printer. This Mac OS X: How to reset the printing system document from Apple will explain step by step how to reset the printing system. Once you've added the printer back you should be able to print without issue.
Hope to hear back from you soon with a success story
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

I cannot cancel a print job, cannot print or restart print so other jobs won't print. any help?

I cannot cancel print job or restart, so I cannot print new job. How do I clear this off?

Hi,
From the Control Panel, open Administrative Tools and select Sevices. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document(s) have been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Will there be an update to the HP LaserJet P1102w enabling it to accept HP TouchPad print jobs?

I have 4 HP TouchPads and they cannot print to the P1102w because of the character protocol being used.

Hi CyberCDR,
The Laserjet P1102w has a firmware update that will enable ePrint. you could use this method and simply email your print jobs to your printer. I am unaware of any further support for the Touchpad specifically.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Since installing Mavericks, my HP Printer adds an extra page to every print job, and iCal won't synch via iTunes with the Calendar on my iPhone 4s. Can Mavericks be uninstalled?

Can Mavericks be uninstalled? Don't know if the discussion title pulled in all of my problem, so here it is again. Since installing Mavericks, my HP Printer adds an extra page to every print job, and iCal won't synch via iTunes with the Calendar on my iPhone 4s.
And no, I was a bad boy and had not been Time Machining. Guess I will now.
So, can Mavericks be uninstalled?

Uninstall CleanMyMac2 > How To Uninstall CleanMyMac
Uninstall Cocktail > Uninstall Cocktail for Mac OS X
Third party cleaning utilities are not necessary on a Mac and can only cause problems.
Your Mac runs maintenance in the background for you > Mac OS X: About background maintenance tasks
Growl is un necessary and can slow the system down > Growl - Removing Growl
If you want to monitor the system, use the pre installed Activity Monitor app located in HD > Applications > Utilities
Then restart your Mac.

Can't get email address for printer won't accept password

Went to eprint center to register printer, worked fine,but when we tried to give printer email address so we can email to printer from remote locations won't accept password no matter what itry
This question was solved.
View Solution.

MasterBinker, have you tried using the Forgot Password link in the sign in page for ePrintCenter? This should send a new password to the email address.
You may also want to try using a different web browser.
Regards,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My hp laptop won't accept my hp 6500a printer's ip address

my hp laptop won't accept my hp 6500a printer's ip address

Are you trying to install the HP software and the IP address entry page still does not find the printer?
If the printer still has the same IP, it should work, but there may be things that block it. What router are you using? What operating system? What antivirus?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Print jobs won't automatically drop from the print queue after printing

I just bought an Envy 7640. When printing multiple documents, the first print job hangs in the queue after it prints, which prevents subsequent jobs from printing. The first job continues to show a status of Printing after it prints the job. I have to manually go into the queue and cancel the finished job before the next job in the queue will print. Having to clear the queue manually each time a print job finishes is not an acceptable fix to the problem. How can I get the printer to automatically delete the print job after it prints like it's supposed to do?

Thank you for your reply. The steps that you sent are for print jobs that you cannot delete from the queue. I also found those instructions earlier, however, it doesn't apply to the problem I'm having with my printer. I don't have a problem deleting print jobs from the queue. As my previous post stated, when I print multiple documents, the first document prints but it stays in the queue with a status of Printing. Because it stays in the queue with the Printing status, it prevents the second and subsequent documents from printing. My problem is that I have to go to the queue after every single job prints and delete it from the queue to allow the next document to print. It's ridiculous to have to delete every job from the queue after it prints. The printer should automatically delete the job after it prints it, and then print the next job in the queue. How can I make the printer delete a job automatically after it prints it?? Can you please give me a resolution to this problem? Thank you.

Psc 950 won't complete print job

Printer intermittently produces partial print jobs, sometimes 3 lines, sometimes more or all. After clearing the error and cancelling the job, the behavior is still the same. Sometimes restarts and prints the complete job while ('m checking my email. I reinstalled the driver, get the same goofiness. (Windows 8 and Toshiba laptop.)

Hi @Bob-H,
Since there is not full feature software and driver, and you are using the Windows built in solution, we can't uninstall ad reinstall. We can however try an alternate print driver to see if you can print more constantly with a different driver.
To assign an alternate print driver in Windows 8:
Hold your mouse arrow in the lower right, or upper right, corner of the screen to bring up the Charms Bar. If you are using a touch screen, you can swipe your finger from the right side to the left.
Select the Search Charm.
Under the search box, click on Settings.
In the search box, type Devices.
Click on Devices and Printers.
Right-click on your printer.
Select Printer Properties.
Click on the Advanced tab.
Click on New Driver.
Click Next.
Select HP from the first list.
Select HP Deskjet PCL3 Class Driver from the second list. You can also use either the Photosmart PCL3 class Driver, Officejet PCL3 Class Driver, Deskjet 990c or Deskjet 450 driver.
Click Next.
Click Finish.
Click Apply to save the changes.
Click OK to close the window.
- Source
You can also try the Windows troubleshooter. A troubleshooter is an automated tool that can find and automatically fix some problems with your PC. The printing troubleshooter can fix problems with installing and connecting to a printer. (Fix printer problems)
Please use the thumbs up below if you happy with my efforts to help.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

It keeps on saying print job was not accepted

I kept on trying to print out my project from school on pages but it kept saying print job was not accepted. What do I do?

Hey mellyk99,
Thanks for the question. After reviewing your post, it sounds like you are having trouble printing. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Troubleshooting printer issues in OS X
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Printer connected to AE suddenly won't print jobs submitted by Mac clients

I have an HP 2015 Laserjet connected to an ethernet port on my AE. It has been running fine for almost a year. Suddenly (today) it no longer prints jobs submitted from 2 different Macs (10.5.7 and 10.5.8) on the wireless net. There are 2 Windoze machines on the wireless domain which have no trouble printing.
I can see the utility page from the Macs, so the connectivity is there. When I submit a print job, it shows up in the print queue, the green data light on the printer blinks, the job now is displayed in the queue as "completed." But no printing occurs.
Yes, there is paper in the printer. I can print a test page but only from the printer's control panel. The 2 Windows machines can print.
I have tried everything I can think of: removing the printer and reinstalling it, rebooting the machine, cycling power on the AE, cycling power on the printer. Nothing helps.
I run network diagnostics and get the following error message:
+Network Diagnostics was able to connect to the Internet,+
+but not to the server "HP Laserjet P2015 Series+
+(20D501).pdl-datastream.tcp.local." This could be+
+caused by problems with the server, or an Internet+
+problem between this computer and the server.+
Does anyone have a suggestion?
Message was edited by: Micheal LeVine. Network diagnostics info added

Problem has gone away.
Removed printer from printer list
Shut down everything -- iMac, AE, printer, wait 5 minutes, power back on,
added printer to list
Everything works.
An Apple mystery.

Pinter won't print; can't cancel failed print job; cannot print anything

If I try to cancel a print job, the printer dialog box claims the print job is being deleted, but it never is. The only nway I can get rid of the message and clean up the print queue is to reinstall the printer. This is absurd. HP's help is anything but. What is the problem. I have a Deklsjet 1660.

Debra,
Look at my solution just above your post. Go here:
http://support.microsoft.com/kb/290301/en-us
Scroll to the bottom of the page for the download link, and download it to your desktop. The link looks like this:
Download the Windows Installer Cleanup Utility package now.
Double click the icon that is on your desktop to install it. Startt eh program through "start", then "Programs".
Find Adobe reader in the list, highlight it and click the "Remove" button.
Got to www.adobe.com and download Adobe Reader to your desktop, and install it. You should be good to go.

Print Jobs won't start

After several years of trouble-free printing from my Blue Dalmation iMac to a HP Deskjet 630 printer, it's all suddenly gone wrong.
Recently I zapped my PRAM and ever since I've been unable to get the Print Jobs to start. Every time I click 'Start Jobs' it immediately goes back to 'Print Jobs Stopped' and nothing will print.
I went into the Printer Setup Utility, hit Reset Printing System and tried to add the HP printer again. But when I do that I get "Error:-9672".
Someone please help! I can't print anything at the moment and I'm in a right old stew without a printer!

Hi again!
Right - I've sorted out the repairing permissions problem (I had indeed accidentally trashed the BaseSystem.pkg - I replaced it from my laptop and all is fine).
Having done that I repaired permissions, rebooted both my Mac and the printer...
But I still get exactly the same error message when trying to add the printer.
Could this be something to do with HP Printers and the latest OSX Security Update? I've noticed a couple of HP printer users further down this part of the forum seem to have had the same problem.

Print jobs won't stop printing...ever.

Since upgrading to Leopard, I've got a problem with an old HP PSC 750 where the print queue seems to generate unlimited copies of one print job. I printed a three page document and went and made coffee and came back to what seemed to be +War and Peace+ in the output tray.
I'm not sure I want to download a driver that's not been updated in a couple years, but I don't want to abandon this printer, which, although problematic over the years, is a cheap workhorse. I've not seen a lot of discussion of this problem on the web, is anybody familiar with this? Thanks in advance...

I found the solution on this site : http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing
You just have to uncheck the chekbox "Enable two-way communication" on the "Ports" tab of the printer properties and it works normally again !!!!

Printer won't accept print job

Similar Messages

Maybe you are looking for