Printer won't print a OS 10.3 document--why?

I have an HP 940c printer that I have been using with my G4 mac. I ran into some trouble with the cartridges but that is now ok.
Because the printer wouldn't print with the usual software, I downloaded the HP software for OS10.3 and installed it. It actually installs on the OS 9 classic mac. The utility came up and I was able to print a test page ok in black and white and color. But when I tried to print an Appleworks 6 document, on the 10.3 mac, the printer would not funtion. The printer is ok but the software or setup is wrong.
Would appreciate help or comments on what to do. Thanks.

georgex5,
"But the Repair Disk function was never enabled, so I could not run it."
Although I don't think it will help solve the printer issue, for future use,
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
8.When finished, select Quit Disk Utility from the Installer menu.
9.Select Quit Installer from the Installer menu.
10.In the resulting pop-up window, choose restart.
11.After the computer has restarted, you can eject the CD.
ali b

Similar Messages

HP LaserJet P2055dn Printer won't print the last page of documents & envelope problem

My HP LaserJet P2055dn Printer won't print the last page of documents until i send another document, then it will print the last page of the previous document, but omit the last page of the current document. I need to keep printing a blank page or any other page to get my previous documents completely printed. Also, the envelopes print with large rectangular boxes on them and no address (I don't know if this is a result of the previous stated problem or not - it started happening at the same time) I use the envelope feature in Microsoft Word 2010. I never used to have either of these problems - didn't make any changes to the system or add any software to the computer, so I know it's not that. Any help would be greatly appreciated!!

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My Deskjet D1660 won't print part of my Word document

Please help me!
Yesterday I struggled for three hours to print black until I found out the cartridge ink was clogged, I cleaned it and that solved it. I've got a HP Deskjet D1660 and my laptop is Windows 7.
But today I was printing part of a Word document (page 24 onwards) and it just printed a couple of pages. It won't print page 26 onwards! printer says there is nothing in the queue and that the printer is ready. I've tried everything I could think of...... please help me; I think the problem is not the printer as it would printer anything else, including other Word documents. It must be something else, I just don't know what! :'(

Hello Moyo1,
Welcome to the HP Support Forums!
First off, I am glad to hear you have been able to clear the clogged ink jet that was preventing the Photosmart D1660 from printing black. Regarding the current issue, not printing past a set page number, let's try and fix this for you.
Since you have a Windows Operating System, run the HP Print and Scan Doctor. This will look into driver, software and communication problems that could be causing this.
Let me know the results, what passes, fails, etc and I will be looking forward to hearing back from you.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Why can't I print a 3 page pdf document?

I have an HP Laserjet P1102W. I am trying to print a 3 page pdf document. The print preview looks correct but when I go to print it prints a blank first page. The second page prints correctly but the 3rd page won't print at all and I get a error light on the printer. I think it might have something to do with the spooler settings but I don't knowthat much about it. Does anyone have any ideas?

Hey hoganhead!
I'd recommend taking a look at this article:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02726548&cc=us&dlc=en&lang=en&lc=en&product=411...
This links to a diagnostic utility supplied by HP to test the printer for issues.
Pending the results, I'd love to get more info regarding the issue such as the error lights and what they look like.
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

How to set print option for a Billing document using T-code VF02

Hi All,
Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
regards
Anand.

Enter the billing documents detail
Goto Goto> Header>Output.
Check the status for your output type in this screen.
If it is green then come back to the VF03 screen.Enter the billing document number.
Click on Billing document-->Issue output to.
Press (CtrlShiftF1) or click on the icon beside "Print options".
Here you can see the print preview.
If the status is red then click on the processing log.Here you will get the error messages.
If the status is in yellow colour,then click on the "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
Enter the billing document no
Go to Menu option -> Go to -> Header -> Output
In that screen you have to add relevant output type. (Standard output type is RD00)
Add that & press enter key
Highlight that line & press "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Press "Back" Button
again select that line & go to "Communication method" button
Set "Logical destination" as LOCAL"
Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
Press "Back" Button
Save
Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
You can see that output type line appear.
select that line & press "Print Preview" button or (CTRLSHIFTF1)
You can see the print preview.
Alternatively you can use VF31 to print multiple print outs at same time.
If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
Then normal way, print the billing from SAP.
It'll automatically send to your PDF writer. You can save it to the path you want,

Message- Print No pages from the document were selected to be printed

I have had this application for some time, simply never used it. Last night I tried converting a PDF file to word, unsuccessfully, I might add.
Today, whilst printing a page, my printing settings appear to have been reset because when I selected Print selected page, the following message appeared:
Print
No pages from the document were selected to be printed message
How do I reconfigure my settings to preview rather than defaulting to PDF? Kindly advise. Cheers.

I have only been able to print by exporting from iphoto. I have a new HP printer and there is software that supports photo printing ("HP photo smart") and I have been able to do it this way. On some occasions I have been able to use the iphoto>print>then preview before actually printing. There is a print option on the preview pane and that has worked on occasion...unsure why it doesn't work always. Please pass on any other hints, or let me know if this works for you!!
G4 Power book 867Mhz Mac OS X (10.3.9)

Taking print of more than one document at a time???

Hi sap experts,
Presently my client is taking print of one document at a time. Is there any process/system through which he can take print of more than one document at a time in a specified format by putting the document number range.
Regards,
Sumeya offrin

Hi melanie1621
Yes You can upload more than one document ...
Please do the following :
1. Click on upload files button under Acrobat.com
2. A pop will open .
3. Select more than one file by keeping the CTRL button pressed.
4. Once, you select all the files , Click on Open ...
It Will Start uploading all your files ...!

Printing a selection from a document using HP E Print

Hello all,
Is it possible to print a selection from a document using e-Print? I currently can emailt he entire document to my printer however that is it.

Hi dayanks101,
Thank you for being a member of the HP Support Community. I see that you would like to learn how to choose which pages print from a multi-page document.
Since you have the document in an email already it’s fairly easy to choose which pages you would like to print if you are using the HP ePrint app. I’m presuming that you have already download the HP ePrint mobile app to your iPad and added your email account to the app.
Please follow these steps after you have opened the HP ePrint app
Choose the email with the document you need to print.
Please choose the document you want to print (for my screen shot the file is titled “scan 2014_05_29 08-55-01.pdf). This will load the document with the available print options.
Please tap on “Page Range”. It will give you the options of ‘Single’ or ‘Multiple’.
If you are choosing to print just one page please choose ‘Single’ and then choose the page you would like to print.
If you are choosing to print a range of pages please choose ‘Multiple’ and then choose the page range you would like to print.
I hope this helps you print just want you need.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

My hp office jet printer will not scan a document wirelessly print works fine on wireless any thoughts on this problem

my hp printer will not scan a document wirelessly the wireless print funtion works fine i have to plug the usb cable into the laptop to scan a document any thoughts on how to do this wirelessly thanks

i have to plug the usb cable into the laptop to scan a document
This is because HP has not provided network USB drivers to allow scanning when the all-in-one is connected to the USB port on the AirPort Extreme.
HP has only provided drivers to allow printing when the all-in-one is connected to the USB port on the AirPort Extreme. To be fair, other manufacturers who offer all-in-one products do the same thing.
If you need to scan documents, you will need to connect the all-in-one to the USB port on your computer....until HP offers full featured network USB drivers. Check with HP Support for possible progress in this regard.
If your all-in-one happens to offer wireless connection options or wired Ethernet options to connect to your network, you should have full functionality that way.

I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.

I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.

Hello, SoonerAnesthetist.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Cheers,
Jason H.

How to duplex print from a MS Word document in HP 1020 Plus printer

Two days before I have acquired a HP 1020 Plus Laserjet printer . How to duplex print from a MS Word document and Corel Draw document in HP 1020 Plus printer? I tried manual duplex printing by printing the odd pages first and then even pages ....it came out correct ,...but whenit comes to Page numbers continuity it is not properly printed ....why?? Can anyone highlight on this and give me a step by step instructuion to print Duplex and thereby help me to create 20-----------page or 30 page booklets.....from MS word typed document or corel draw document......Expecting a speedy solution
thanks & regards,
K Narayanan
This question was solved.
View Solution.

@immo22269
The laserjet 1020 only has manual duplexing capabilities. Please refer to this document for a complete set of instructions.
Print on both sides of the paper (manual duplexing)
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Creating a print button to print a page from another document - is this possible?

Hello,
My company is designing an interactive pdf with indesign with some great navigation on a side-bar. We've made the dimensions of the navigation pages larger than 8.5 x 11. We are constructing a pdf portfolio that contains a printable version of this document and this interactive version. Would it be possible to have a print button in the interactive document that calls up the corresponding page in the printable document and send it to the printer?

Flash Catalyst does not directly support printing. You are going to have to add that functionality via Flash Builder and writing ActionScripting. I have not worked with the printing capabilities in Flex, so there is not a lot I can offer past this in terms of advice.I would suggest browsing the Flex forums for some guidance on how to assemble your state for the printer.
Good luck!
Chris

Disable print function for a pdf document

Is there a way to make an Adobe pdf read-only? Can I disable the print function for an isolated document before making it available to others? I am working on MAC laptop.

hi
i got the answer
we have to give issue output to -->screen

I have protected pdf files. You can not copy things, but it is allowed to print. In the menu of the pdf it says you are allowed to print. I already printed lots of times the document. But today there is an error "The printer is not admittet to print these

I have protected pdf files. You can not copy things, but it is allowed to print. In the menu of the pdf it says you are allowed to print. I already printed lots of times the document. But today there is an error "The printer is not admittet to print these pdf". Its new. Theres no problem with the printer. I can print word documents, internet pages etc. But today I can not print anymore my pdf document, although printing is allowed and only copying is forbidden.
How to solve the problem with the pdf?
Thank you.

Hi Hans,
There seems to be other restrictions in the document that's not allowing it to print.
Would it be possible to share the document with me so that I can have a look?
Regards,
Rave

When I try to click on print in Mapquest and PDF documents I cannot get the popup to print the page

When I try to click on print in Mapquest and PDF documents I cannot get the popup to print the page when I click on "print."
I have to type the URL in Google Chrome browser and the print button works fine.
How can I get the print popup to work in Firefox 6.0?

My sister's 5s is having the same issue since yesterday.
Neither resetting via holding home+power buttons helped, nor the "reset all settings" in the settings. The only option left is erasing the iPhone and setting it up as a new phone ( or restoring from a backup?)

Printer won't print a OS 10.3 document--why?

Similar Messages

Maybe you are looking for