Printer won't print - HP Officejet Pro 8600 Plus All in 1

Hi,
Please can anyone help me ?
I have Windows 7, 64 bit HP computer with  a HP Officejet Pro 8600 Plus All in 1 Printer.
It printed over the network/wireless yesterday. I then had a problem scanning to the computer so I followed advice on the HP community and uninstalled and re-installed the latest software/driver for the printer.
Today it WON'T PRINT!! The printer has a connection to my router (Plus Net Technicolor N router) and shows the little symbol on the printer screen. I tried printing my work today and it says the printer is offline - it can't be as the printer is ON and has a signal connection. 
I have uninstalled, reinstalled, turned it on and off on the printer, I've restarted the computer, I've unplugged and plugged in all of it - the router, computer and printer. The computer has the green tick to say the printer is the default and it is ready. It then says to check the network connection or it maybe to do with the firewall settings, but these I haven't changed for over 1 month and I've printed loads of stuff between then and yesterday.
I desperately need my printer and short of going to have to buy a brand new one - I don't know how to fix it!!!
Please can anyone out there help me??!!!
Help!!!!!!!!!!
Thanks for any helpful advice
Victoria

Just to say as well that on the top of the 'X there is a problem printing' At the top where it says the printer - it has on it 'Fax - HP Officejet Pro 8600'
So it is trying to print from the 'Fax' part of the printer and yet when I change the printer device to the actual 'printer' part to default it always changes back to the 'fax' Officejet Pro 8600 Plus rather than the Officejet Pro 8600 Plus.
I will uninstall all the elements to the printer and then find the latest driver to the printer and start again to see if that helps.
Please help me!!!
Thank you for any helpful advice
Victoria

Similar Messages

  • Printing custom sizes on HP Officejet Pro 8600 Plus from Macbook Pro

    I am having trouble setting up a Word Document (Word for Mac 2011) to print in a custom size on my HP Officejet Pro 8600 Plus.  I'm using a Macbook Pro running Yosemite.  
    I would like to print on a card stock that is 4.5 in x 13.5 in.  I have tried under Page Setup to create a custom size under Manage Custom sizes, however, I'm hitting a brick wall.  The printer gets the job but can not feed the paper.  I've also tried to set my default paper size under my System Preferences/Printers and Scanners to be this size...still not working.
    Please help!

    Hi @klinecard 
    It is important to ensure the paper size you are selecting is a supported size, and make sure the weight is supported too.
    Printer Specifications for the HP Officejet Pro 8600 e-All-in-One Series Printer Series
    Please look under paper handling.
    If your desired size and weight is supported, you might find the following helpful; Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X
    Truthfully, since you are not getting an error message, I suspect you have correctly setup the custom size, this issue is most likely the printers inability to feed the paper you are using.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP Officejet Pro 8600 Plus (All-in-One) - Incoming Fax but mistakenly answer phone

    I have landline phone service.  On this line, I have multiple phones, an answering machine, internet service via wireless Uverse setup, and the HP Officejet Pro 8600 Plus as a fax.  It's also a printer/scanner - but that uses the wireless Uverse service.
    The unit works as a phone, if I answer in fewer than 4 rings.  The answer machine picks up after 4 rings.  If a fax, the fax connects after 6 rings.  (Auto answer function is turned on.)  This works.
    If I mistakenly answer a fax call with the phone that the HP 8600 is connected through, I can press: 1,2,3 and the fax will answer.  This works.
    Problem: If I mistakenly answer a fax call from one of the other phones in the house (same phone line is ringing as before - but the phone is NOT the one through which the HP 8600 is connected) - 1,2,3, does NOT work.  If I rush to the HP 8600: pressing the "fax" button on the unit does not connect the fax call; nor does the HP 8600 give me the option to "Accept" the call, when the phone as been answered. 
    Does anyone know what buttons to push to get the fax to connect when the phone line is answered at a phone?  Either at the answered phone OR if I can get to the HP 8600 when I hear the fax tone - buttons I can push on the HP 8600 to get it to respond to the fax tones coming in on the line?
    Thanks to anyone who can help.

    Hello Vandy73,
    I see that this is your first visit with us here on the HP Forums.  Let me please take a moment to say "Welcome". 
    I hope you enjoy your experience!
    To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you have some concerns when it comes to answering a fax call by accident from another phone.  Pressing the 1.2.3 on the fax is the proper way to remedy the issue when you answer from the fax, however this feature will not work from another phone.
    I do realize that this is an inconvenience.  The only resolution would be to contact the sender of the fax and have them resend.
    Thank you for your time.
    Cheers,
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My HP Officejet Pro 8600 Plus all-in-one doesn't scan over my wife network anymore

    I have a wi-fi network in my home which works fine for internet on my laptop, and I used to be able to both print and scan over this network just fine.  I can still print using the network, but can no longer put stuff into the document feeder and go back to the laptop and use the scan function.  The scan function actually no longer even appears on the icon I used to have for it, only the print function.  
    The scan function does not appear in my device manager (control panel), in either the image devices or the printer devices area.
    I have tried to uninstall and reinstall this device several times in many different ways and even tried to obtain the updated driver from the internet.  I was successful a few months ago in reinstalling the device and retrieving the ability to control the scanner from the laptop.  Now I can only reinstall the printer function, periood.
    How can I get back the scanner function on my laptop to use over my wi-fi network?  Of course my warranty for service expired earlier this year.  

    Good day and welcome to the forums, @MSRantal
    I read about how you can no longer scan over the network from your Officejet 8600 Plus, to your laptop, and I will do my best to help you out. I have some questions to get started.
    I would like to know:
    Which operating system you are running on your laptop?
    Are you able to scan to another computer over the network?
    Have you tried plugging in a USB to the laptop and scanning?
    If yes, did a USB connected scan work?
    Have you tried scanning after disabling your firewall and/or anti-virus?
    When you install the printer, do you see any error messages (or does the install completed successfully)?
    If you do not have your printer plugged in directly to a wall outlet, try that.
    Hoping to hear from you!
    Happy Tuesday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet Pro 8600 Plus "unspecified printer problem"

    I just set up my HP Officejet Pro 8600 Plus e-All-in-One.  The set-up seemed to go okay, but when I go to the "devices" tab for "HP Connected" it has a yellow yield sign and says that I have a problem with my printer.  When I click on the yield sign symbol, the box says that "An unspecified problem was reported. Please check your printer."   When I check the printer pannel, there are no problems reported.  The machine seems to print okay, but I'd like to clear up this error that is shown.  Any ideas?
    Also, I've already done the restart and sign-off/sign-in stuff, so we can move on to second-order trouble shooting.  Thanks.
    This question was solved.
    View Solution.

    HELP!
    I am having exactly the same problem. I am simply swapping out an existing Deskjet 3512 that worked perfectly at all levels, so i KNOW i dont have router/port/network issues. eprint was and is flawless. I just plugged it back in to check and it still works just fine with eprint.
    Using my new Pro8600, I send emails to my eprint address and they seem to go...and then nothing. they just don't print.
    I get the"Officejet Pro 8600 Plus "unspecified printer problem"" message but my front panel reports no issues.
    I'm a step away from taking this back and buying an Epson.
    My experience with their support has bee stellar at a commercial printer level.
    This seems to be a very common problem and I just dont have hours to monkey around with something that should work out of the box.
    any help will be appreciated.

  • HP OfficeJet Pro 8600 Plus will print wirelessly but not scan

    I have a HP OfficeJet Pro 8600 Plus all in one printer/copier/scanner. It's worked fine for the several months I have had it. But now suddently the computer does not recognize the scanner. I am connected to the device wirelessly and can print but not scan. I haven't been able to figure out why the comptuer recognizes the printer but not the scanner. I uninstalled and reinstalled the device but still no success.
    Any ideas how I can get the computer to recognize the scanner? I am running Windows 8. Have not updated to 8.1.

    Hello Sarah1234, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing scanning issues.  I would like to help.
    I would recommend powering off your printer and computer.  Once they are both down, I would recommend unplugging the power from your wireless router for 60 seconds, and then plugging it back in.  Once it has begun broadcasting again, power on your printer and computer.
    I would also recommend downloading and running the HP Print and Scan Doctor. Once you have launched the tool, select the 'fix scanning' option.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Officejet Pro 8600 Plus Where is the print preview???

    I just purchased HP Officejet Pro 8600 Plus all in one printer.  Where is the print preview option.  It's no longer on "preference" or anywhere else. 

    Since HP isn't answering me on the 'Print Preview' being available soon or which HP printers software actally HAVE the 'print preview' function enabled... I did some searching and I found a partial answer to the 'print preview' delema.  The web site http://www.obviousidea.com/windows-software/greencloud-printer/
    has a free program called GreenCloudPrinter which, in a nut shell, will install a printer called GreenCloud which set itself up as the default printer and any file that is sent to the printer gets directed to the GreenCloud device which will then bring up a 'print preview' screen with options to remove blank pages and or print or not print the preview!  And a lot of other functions too.  Works great and it's free.  You do have to register it and a registration code is emailed to you to unlock the program. I hope that helps you out... worked for me.

  • How or where do I find the printer year? HP OfficeJet Pro 8600 Plus

    How can I get the printer year for the HP OfficeJet Pro 8600 Plus? I have looked in printer staus report and the various labels I can find on the printer itself. I'm sure I'm just missing it.I bought it new, so I do not have any reason to think the information was removed prior to purchase. Thanks

    The printer status report has in line 47 the date (rounded to the week) the printhead was installed.  Except in the rare case the printhead has been replaced this would correspond to the date the printer was installed.

  • Officejet Pro 8600 Plus scanner failure

    I have an Officejet Pro 8600 Plus all-in-one. When I first got it, all of the features worked fine: print, scan, and copy. A few weeks ago, it started to not scan or copy, and printer was hit or miss. I have managed to resolve the printing issue, but it still wont scan or copy. I have tried uninstalling the printer both from the hp folder and control panel and then reinstalling the driver (I have the full feature one). I have tried the scan and print doctor, and it doesnt make it past the second step. The error message the printer displays is, "scanner failure: unable to scan, copy, or send a fax." I have also followed the steps to go into services, and both of the necessary dependencies are listed for the WIA, and the RPC and shell hardware are both started. Please help.

    Hello ld2hx,
    Welcome to the HP Forums.
    I see that you are having an issue with scanning, copying and faxing. 
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Please click on the following link for A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Officejet Pro 8600 Plus - Banners

    Can I print banners with my HP Officejet Pro 8600 plus - on Windows 8.  I saw a post that had such a headline but no info on banners...help?!

    Hello HalfWhit,
    Welcome to the HP Forums! I understand your concerns with your Officejet 8600 plus. I am going to provide the Officejet Pro 8600 Plus Product Specifications. This document provides the supported paper sizes this printer can handle.
    This printer doesn't support printing banners. If you take a look at the specifications it states the supported media sizes:
    Plain paper; Thick plain paper; HP Bright White Paper; HP Premium Presentation Paper, Matte; HP Premium Plus Photo Papers; Other inkjet papers; HP Advanced Photo Papers; HP Everyday Photo Paper, Matte; HP Everyday Photo Paper, Glossy; Other photo papers; Other specialty papers; Other Greeting Cards; HP Brochure Paper 180g, Glossy; HP Brochure and Flyer Paper, Matte; HP Tri-fold Brochure Paper, Matte; HP Tri-fold Brochure Paper, Glossy; Other brochure papers; Plain hagaki; Inkjet hagaki; Photo Hagaki; Card Stock.
    If you have any further question, please let me know.
    I worked on behalf of HP.

  • [win7 64bit ultimate]: HP Officejet Pro 8600 Plus prints won't scan

    Guys I have spent 2 days on reading and trying all of the suggestions in previous posts. My HP Officejet Pro 8600 Plus JUST won't scan. When I click to scan a Document or Photo the HP Scan pops up saying: The HP Officejet Pro 8600 was not found.
    When I do unistall the HP basic software and then install again it works fine. However when pc restarts problem is still there.
    I have completely uninstalled my avast Antivirus and also configured the windows firewall. No luck till now.
    Tried the HP Print and Scan Doctor: It appears that the problem is in the device manager. Edited: Just looked at the device manager and spotted this >  
    If I reinstall it will work only till my next restart.
    Any suggestions?

    @N3CR4, welcome to the forums
    I read about how you cannot scan and have been troubleshooting quite a bit lately, to no avail.
    I have some questions and some ideas for you. If you've tried the steps, just let me know the results. Here are my ideas for you.
    Have you uninstalled the printer by right clicking on them in the Device Manager, as shown in your screen shot, then restarted your PC and reinstalled?
    Have you tried creating another User Account with Admin privileges and tried installing?
    Try a clean boot, and restart the PC and ensure your Firewalls and Anti-Virus scanners are disabled and try running the installation.
    Will the printer install successfully on another PC?
    Remove the printer by using the Microsoft Fix it tool, restart the PC and try installing again.
    Try unregistering and re-registering the Microsoft Windows Installer service:
    1. Click the Start menu and type " cmd " in the search field and press enter.
    2. Type in " msiexec /unregister " and then press enter.
    3. Type in " msiexec /regserver " and then press enter.
    4. Restart your PC and try the installation.
    Run the SFC scan to repair any corupt files. (Run the scan 3 times if there is an issue in the results) then try installing the printer again.
    Using System File Checker to Restore System Files
    I really hope the steps help, let me know the outcome
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Officejet Pro 8600 Plus won't print or scan wirelessly using Mac OS 10.

    Mac OS 10.9
    Wireless
    My printer was working fine until today.  Then when I used the control panel to scan a page I went through the steps and got to scanning and got the message I needed to enable "Scan to Computer" in the HP Utility.  I went there and it was unchecked.  Seems I had this problem every time I did a new scan job in the past.  It wouldn't retain than check.  So I checked it and after awhile I got the message "Communication Error" and to check my connections and if that didn't work restart my computer and printer.  I did that and also restarted the router but it didn't help.
    Then I tried printing from Word, which has always worked but it didn't this time.  The printer icon on the right of the dock came up, bounced a few times then disappeared with nothing happening on the printer.
    So I deleted and reinstalled the printer.  No help.  I downloaded and installed HP software and firmware updates.  No help.  I went through wireless setup.  No help
    BTW, all along I got good "Wireless Network Test" results.  I says it's connected but nothing happens when I try any functions of the printer.
    If I can find a USB cable I will try to see if wired works.
    Any suggestions would be appreciated. 

    Hey @neoflyer,
    I would like to assist you today with resolving the wireless printing and scanning issues you're experiencing on your HP Officejet Pro 8600 Plus e-All-in-One Printer on your Mac OS X 10.9 Operating System. You mentioned that you have powercycled the devices, reran the wireless setup, and uninstalled and reinstalled the software and drivers to no avail. I'm going to suggest a few additional troubleshooting steps to verify if this is a computer issue or a network issue.
    Step 1: Gather the IP and Open the EWS:
    1. On the screen of your printer select the wireless button:
    2. Under the Wireless information you should see your IP address
    3. Open up your internet browser on your Mac computer and in the website address bar just type in your IP address. Please do not include www.
    4. After you enter your IP address in the website bar go to that website
    5. If the website for your printer opens than that proves with 100% certainty that your printer and computer are 'talking' to each other on your wireless network. If the website fails to open than you have a network communication issue with your router.
    If the website fails to open please powercycle your network again:
    How to Properly Powercycle a Network:
    First, unplug the power cable to your Router
    Once your Router is unplugged, turn off your printer
    Next, shut down your computer
    After 30 seconds to 1 minutes, plug your Router back in
    Next, turn on your printer
    Turn on the computer
    After a few moments check on your computer and ensure that the internet is working. Once it is, hit the wireless button again on the printer to see if your printer got a new IP address. Using the IP address enter it in the address bar of your internet browser and now see if the website for the printer opens.
    If the website for the printer opens successfully please follow the steps below:
    Step 1: Uninstall Drivers and Software:
    From the computer desktop, double-click the Macintosh HD, and then click Applications.
    Click the Hewlett-Packard folder.
    Double-click the HP Uninstaller, and then click Continue.
    Select the product to uninstall, and then click Uninstall.
    When prompted, type the Administrator name and Password, and then click OK.
    From the Macintosh HD menu, click Users.
    Click the correct user name.
    Click Library.
    Click Preferences.
    Click and hold the cursor on the first file that starts with "HP," and then drag the file to the Trash icon on the taskbar. Complete this step for each file that starts with "HP."
    Close out of Preferences.
    Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash.
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    1. Please click the following link to download the appropriate Mac OS X 10.9 drivers for your printer: Mac: HP Officejet Pro 8600 series Full Feature Software and Drivers
    2. Once downloaded, run through the step by step screens to reinstall your network printer
    3. Once the printer is reinstalled, attempt a print and a scan!
    Please let me know if these steps resolved your issue. Thanks for reaching out to the HP Support Forums. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Officejet Pro 8600 plus Printer

    I have just purchased the Officejet Pro 8600 plus Printer & installed it with no problems but it won't connect to the internet/web services? It is connected to my home network & will print etc. but when I try to activate the internet as directed, it searches for a while with 'Enabling Web Services (ePrint & Apps)' on the screen & then reads 'Web Services (ePrint & Apps) could not be enabled'. 
    When I tried to activate the web service during instalation, the page read that if it did not activate I would be directed to a page to download necessary drivers but this never happened & the only thing I could do was to select the 'Next' button which completed the installion without the internet/web service working.
    Does anyone know of this issue & if so, can you please tell me how to connect my printer to the internet. 
    This question was solved.
    View Solution.

    That is great to hear Roses66. If you could mark my previous post with the 'Accept As Solution" it will help others in this community to find our conversation easier.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

    Hello:  I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software.  I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
    I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.  
    I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it.  Any help is appreciated.
    Thanks,
    John

    Hi,
    It's an option during the installtion process. Please try the following Utility:
       http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Officejet Pro 8600 Plus will not print from my MacAir

    I have used my MacAir to print on my HP Officejet Pro 8600 Plus for about 5 months without any problems.  All of a sudden my printer will not print.  The wireless icon says it's connected to the network.  But when I click print it says "looking for air printer" and then "printer not connected".  I've repeated the Wizard Set Up for the wireless connection.  I've turned the printer and computer on and off.  I've even tried printing from my iPhone but it will not find the printer anymore.  Please help!

    Hello @ladybonds ,
    Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
    You are saying that you have been printing fine from your computer for 5 months and now your printer says it is connected to the network and your computer says that it isn't.
    Have you recently upgraded to Yosemite the new Apple OS? If not what OS X are you using?
    Are you sure that the printer and your devices are on the same network?
    Does the router give your printer an I.P address?
    Let me know these answers and we can go from there.
    I worked for HP.

Maybe you are looking for