Printer won't re-install after upgrading from 8.1 to Windows 10

The printer worked fine using Windows 8.1 on my netbook PC (no CD-ROM player).When I upgraded to Windows 10 the printer dialog box said I had to install the printer (again!)I use the printer wirelessly and the installer found the printer on my network. However, it was unable to install it after I had selected it. I tried again, as suggested, but still without success.Do I need to attempt to use a cable to install it, or would that be a waste of time too?

Try this Intel Graphics driver:
http://ftp.hp.com/pub/softpaq/sp65001-65500/sp65232.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

Firefox 12 won't start after upgrade from 3.6 in Windows XP with SP3

When I start up firefox after an upgrade to 12 on my Windows XP with SP3 I see the firefox.exe process in Window's Task Manager but it never starts i.e. I never see a browser page. If I try to start it again I get an error message that it is already running.
I have rebooted and even uninstalled/reinstalled Firefox but no browser appears.
Is it possible for my to download the version I had (3.6) and I can just live with that or is there a work-around to get Firefox 12 to work on my desktop?
Thanks

Well I was able to run the profile creator one time (firefox.exe -p) and I created a profile with it but still not able to start firefox. So I tried to start it again after rebooting. It starts a process which I can see in Task Manager but now I don't get either the Profile Manager dialog box or FF.
I also tried to start the profile manager with this command: "C:\Program Files\Mozilla Firefox\firefox.exe" -p.
I terminated the firefox process and tried again but get the same results.
BTW, this command: %APPDATA%\MOZILLA\FIREFOX\PROFILES shows a profile called m6woxz30.default, which is not the name I choice for my profile the one time I got the Profile Manager to run.
BTW, thanks for your help and ideas.

Won't re-install after recovering from a malware (isecurity.exe) attack

Firefox was disabled by an infestation of isecurity.exe malware. after recovery and cleaup, firefox won't install. "...application configuration is incorrect" message.

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

Delete and Re-install after upgrade from single app to full cloud suite?

Hi, I recenly upgraded to the full creative cloud membership from a single app subscription of Illustrator last month.
I opened an illustrator file today from the single app installation and recieved a warning that I no longer have access to the program. Do I need to delete this version of illusrtrator and re-install from my new creative cloud suite membership? Or is there a way to register the current downloaded version of Illustrator with my new full suite subscription?
Thanks for the help

Hi bella1439402,
You don't need to uninstall illustrator from your computer.
You can simply launch the program ---> it will give you a pop up that your subscription is expired or the trial is expired ---> in the same window there will be a button 'License this software' ---> click on 'License this software'
---> Sign in with your Adobe Id on whihc you have the full creative cloud subscription ---> your subscription will be activated.
You can install rest of the products.
Thanks
Kapil

C6150 won't print after upgrade from Vista to Win 7

Hello.
I have a C6150 AIO that worked fine under Vista. Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print. The HP Solution Center test print works fine.
- Printer is hooked up wirelessly
- I've installed the latest driver from HP that is supposed to be Win 7 ready
- I've also installed the patch they recommend after upgrading from Vista
There is no error. Print job shows up briefly in the print manager window, then disappears as though it printed. I'm at a loss, any help would be appreciated.
Paul
This question was solved.
View Solution.

I hope I have now sorted this problem.....
After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful restore system and start again. Most it took me was three attemps.
Now allI have to do is hope that the windows updates dont mess it all up again!
Hope this helps you......... Good luck

My HP series 3310 won't print wirelessly after upgrading from windows XP to windows 7 32

My HP Photosmart won't print wirelessly since I upgraded from Widows XP to Windows 7 32

Yup, here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76971-1&cc=us&dlc=en&lc=en&...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on "get more search engines" I cannot find Google or Bing or -

Problem with search
After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on “get more search engines” I cannot find Google or Bing or …

I resolved my issue. Renamed search.sqlite and reinstalled Firefox 9.0.1
All default search engines are now available.

After upgrading from FM 9 to 11, FM crashes when the Print Book command is used. Suggestions?

After upgrading from FrameMaker 9 to 11, the program crashes when the Print Book command is selected to print files that were converted from FM 9 to FM11. (Resulting .pdf files are problematic, w/ broken links and non-functioning bookmarks.) Has anyone encountered this issue, and can you suggest a workaround? Thank you!

Known bug - already fixed - get the latest FM11 patch

PDF files won't open after upgrade from 9 to 10 or 11

After upgrading from Reader 9 to Reader 10, I lost the ability to open PDF files on my Win 7 laptop. Even the icons became blank white blocks. I reinstalled Reader 9 and it all worked as usual. In trying Reader 11, it happened again. Any thoughts?

Thank you for your reply. Allow me to clarify.
After installing Reader 10 or 11, the icons for PDFs on my desktop changed from the typical PDF icon to a blank white icon like when the extension of a file has been changed or omitted. Double clicking the icon no longer opens the PDF file. Yes, Reader opens but I no longer was able to open any preexisting PDF files using the new version of Reader. I did try changing away from protected mode to no avail.
I do not have a screen shot as I have downgraded to Reader 9. I have scanned thoroughly for malware and viruses and none have been found.
Thank you again. I look forward to your further comments.
Sent from my iPhone.
Please pardon brevity, misspellings, and autocorrect hijinks.

How do I get print n share to work after upgrade to iOS 5. I can print from this app thru wifi. But it can,t print mail, web pages, etc..

How do I get print n share to work after upgrade to iOS 5. I can print from the app thru wifi and PC. However am unable to print mail, web pages, etc..
In mail when I try to print it just says can,t find air printers. It used to say print with print n share.

I sent e-mail to developer regarding this and they said that basically Apple has denied them access to the Airprint dialog in the new source code for iOS 5. So, the only way to print to pdf is to capture the e-mail or webpage in the internal apps within Print n Share. INHO, this really *****. Apple should make printing to pdf files just a standard feature of all their apps. If they don't do this, they are going to lose alot of business to the Adroid world as pdf file format is the business standard for all documents.

13" MBP Mid 2010 won't wake up after upgrade to Mavericks from Lion

Hi
I read numerous threads regarding this problem from Mac Minis to Mac Pros and also MBA and MBP. After upgrade from Lion to Mavericks, my MBP cannot wake up. I have to hold the power button down to force it to turn off then power it back up from hibernation. SMC reset, Mavericks reinstalled, Repaired Disk Permission, ram refresh, all done and did not help.
It helps whenever the computer goes to sleep, whether forcefully by choosing Sleep from the Apple Menu or by closing the lid.
Anyone please help, if not, APPLE PLEASE FIX THIS BUG.
Thanks
J

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Scanner of HP 8500 A909g does not work after upgrading from Windows 7 to Windows 10

After upgrading from Windows 7 to Windows 10 and subsequent upgrade of printer software, the scanner functionality did not work. When I tried to uninstall the printer software I got the message "HP uninstaller has stopped working". After another upgrade of printer software the scanner was still not working. How can I get around this problem? Update:
I followed the instructions for a similar problem with Windows 8 on http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Scan-doesn-t-work-on-Solution-Center-after-migrating-to-Win/td-p/2228367.After this, the scanning seems to work. Not sure whether it is possible to uninstall, though (don't want to try since it is working).

I had the same problem with my Officejet Pro 8600 All-in-One scanner, sfter upgrading from Windows 8.1 to Windows 10. After uninstalling and then reinstalling the printer driver, the problem is solved. You can look up the model of your printer on HP's support site and download it from there. Apparently, not all printers are compatible with Windows 10. In that case, they recommend you buy a new printer. ;-)

Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
machine 10.6.1. with RDC 2.0.1 (non-working)
9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
Any help would be appreciated

Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

Printer won't re-install after upgrading from 8.1 to Windows 10

Similar Messages

Maybe you are looking for