Printer won't stay connected in Windows 8

I have Windows 8 Compaq laptop. I also have an HP ENVY 4501 e-All-in-One printer. I have had this problem with my last printer too, but now I am finally tired of it. Every time I close the lid to my laptop or the printer powers off/goes to sleep it disconnects from my laptop. So every time I go to print it tells me the printer is offline even though the printer is on, connected, and sitting right next to me. Then I have to go into the control panel, remove the printer, and re-install it. How can I get it to stay connected to my computer all the time?
(By the way, I have already tried leaving the printer on 24/7 and it still disconnects from my computer)
Please help!
Thanks
This question was solved.
View Solution.

Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Step 6 to set Static IP
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Printer won't stay connected via wired router

I have a Deskjet 1512 all-in-one and I'm having some problems getting it to work. I have Windows 8.1 and I'm connecting the printer through a linksys router via USB. The USB Control Center that I downloaded from linksys shows that the printer is connected, but it keeps connecting, then losing connection and I can't figure out how to keep it connected. So far I haven't even been able to print anything.
Any and all help would be appreciated.
Thanks

Hi @Blends412,
Welcome to the HP Forums!
I see that your HP Deskjet 1512 printer will not stay connected via wired router. I am happy to help!
According to your printer's specifications, and user guide, this printer only supports a direct USB cable connection, from the printer to the computer. You will need a USB 2.0 printer cable. The cable looks like this.
Please see this guide, Setting Up the Printer Hardware for HP Deskjet 1510 and 2540 and HP Deskjet Ink Advantage 1510 and 2..., on how to setup the printer.
Hope this resolves your issue, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 7510 AIO printer won't stay connected - Wired workstation, wireless printer

Hi! I spoke (and checked solution button) too soon. The printer still "disappears" from the Wired XP network workstation. The only difference since applying the solution given is that the disconnects are now happening about every 12 hours, vs every couple of hours.
Ink notification is set to "only when I print"
Static IP is set for all machines
HNDU works -- when the printer is visible but will hang the workstation if printer is not visible.
Original comments follow below;
HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-12-2012 03:59 PM
Printer: HP 7510
Network: multi-station wireless, thru DLink DI-632 (one PC hardwired to router)
Address Config:   Printer is using static IP -- outside of DCHP range (192.168.15.240)
Printer Config: Each computer has static IP set into the control panel app, using IP addressing.
Operating System: XP (Service Pack 3)
Other devices: Ipad, Xoom and Kindle Fire (all working using ePrint)
Network Security Protocol: WEP (we're out in the country)
Network Setup: Main router, along with 2 access ports (hardwired); currently using channels 1, 5 and 11 (again, we're in the country and have little competition for channels)
File Sharing: All machines in network have one open "share" drive, accessable with passwork.
Scenario: Wireless computers appear to stay connected for several days to a week at a time. (We reboot weekly, just as a SOP)
Computer that is wired to the network loses communication with the printer a couple of times a day and needs to be rebooted in order to restore connection.
When this happens, other machines continue to print and scan, with no problems, and the wired machine continues to have its name displayed in the SCANNING panel on the printer -- but the printer won't talk to it.   All network functions, including internet and intranet access to the printer's EWS is still available. I have noticed that if I go into check ink levels, though, that the ink check software behaves differently.
Normally in the ink status app, there is a small "working" icon with 6 dots. When this computer is connected properly, it will start jumping around the circle, showing activitiy, get to 41%, and then display the ink status info. When the printer/computer connection is not working, the "working" icon will go to just a couple of percent then jump to the printer information page, showing make, model, serial number, firmware level etc.
In every instance so far, rebooting (with no other action) brings the printer/computer connection back to life -- until next time. I am trying to find any other pattern for this behavior, just can't identify it yet.
I started out with the plain vanilla installation, but then every computer in the network would consistently drop connections, about every 45 minutes. Using the info on this forum, I've eliminated the drop-outs for those printers, and got to the Static IP solutions (we've done that anyway for years with net-ready machines). This is the last machine that "drops off" It appears that some piece of HP-required software is "dropping out" or getting clobbered, but I cannot see a pattern, even checking and noting the various software used locally on the machine, and the various websites visited. So far, no pattern.
I am hoping that an HP guru with access to the source for the "ink supply" status software can take a look at what is happening and why it will always go to 41% and then display ink status (when connected) and then only go a couple of percent and display the ink status (when it isn't connected).
Thanks, in advance,
jim
Solved! Go to Solution.
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 2 of 5 (65 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-13-2012 01:48 PM
More info:
In last paragraph, above, the request for "ink status" is returned with a static display of the printer firmware version, driver version, step level, MAC# etc of the printer, not "ink status" when the printer is disconnected.
Also, when printer is disconnected the HP home networking utility will hang the system -- a hard reboot is required, which restores the printer, until the next time it goes "into the woods". Signal stregth, measured on the printer, is 4 bars (very good).
Add Tag...
Quick Reply Reply
007OHMSS
Master's Graduate
Posts: 1,302
Registered: 08-12-2009
Message 3 of 5 (41 Views)
Report Inappropriate Content
1
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-20-2012 09:30 AM
Not sure if this would help, some of the info could be pertinent:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&tmp_task=solveCategory&cc=us&dlc=en&la...
007OHMSS
I am a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 4 of 5 (25 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-22-2012 09:53 AM
Thanks! That appears to solve the problem. After your suggestion, I remembered that I set the "ink level warning" on this machine ONLY to "Always warn me", as opposed to "tell me only when I am printing". That seemed to be the problem. Only the computer that was set to "always warn on low ink-levels" was disconnecting -- the others worked fine! Now, all are working fine.
Just to be safe, though, I've also turned off the "scan from printer to computer" function on each computer. That was set for each machine, and seemed to work fine. The other machines in the network did not disconnect, and the printer was tracked whether each computer was on or off.   May try to turn it on later; I'll see if the family uses that feature very often!
Thank you for your help.
Jim
Add Tag...
Quick Reply Reply
jimzix
Honor Student
Posts: 4
Registered: 04-03-2012
Message 5 of 5 (17 Views)
Report Inappropriate Content
0
Re: HP 7510 wireless printer disappears -- 4 station XP wireless network, w/ 1 PC hardwired.
Options
04-22-2012 03:56 PM
I spoke too soon! After about 26 hours, the printer connection on the one "hard-wired" CPU dropped, which is better than before, but still not solid. Same exact symptoms as before. Only piece of the puzzle that was different this time is about 50 pages were scanned, some to this computer. Used the "Scan requested from CPU" process, rather than enabling the "Scan TO Cpu" function in the software app. It did not drop the connection immediately after -- about 1 hour to 1.5 hours afterwards. Suspect this is a coincidence, not a cause of the problem with this machine.
I also scanned (same approach) from one other CPU on the network -- that wifi connection is still rock-solid.
Jim
Add Tag...
Quick Reply Reply
This question was solved.
View Solution.

I think it is fixed now.....the problem seems to reside in the module that will notify you immediately if ink is low (vs notify me only when printing). If, when initially installed, the user selects "immediately", then the printer will randomly disappear. (More on "re-finding it" later.)
Also, it is difficult to change the ink notification setting, because it appears not to be "sticky", but will sometimes, flip. (I've not figured this out yet). As long as the setting for "low ink notification" is on "only when printing", life is good.
If the printer does disappear, go over to the Advanced tab when the printer software/firmware page comes up, instead of the current ink levels. Reset the selection about "tell me about ink notification" to "only when printing", and then toggle the "autoshut off" from "NEVER" to "2 hours" and then, finally, back to "NEVER". Then, lastly, press closed on the panel. Printer should be connected again. To test, go to the Photosmart 7510 app again, and select "Show estimated ink levels". The counter will start at 1%, jump to 41% and then bounce around until it displays the ink level.
FOR HP TECH: Please consider making the "ink level notification" persistent in the registry OR provide a de-install tool that will completely clean all traces of the prior installation of the 7510 driver / app in the registry, so that a new install may have this setting saved correctly.
Hope this helps some of you -- it's an excellent printer once its running!
jim

Acer S7 392 won't stay connected to Window VPN

Can anyone give me a suggestion on what to do to get the VPN to stay connected on my Acer S7 392 with Windows 8? It will work for a few minutes and then disconnect.
Thanks,
Michelle

Hi,
With limited infortmation, it's hard to find the cause, What is the VPN client you're using? Built-in VPN program ot third party VPN client?
Have you checked the event viewer? Control Panel\Administrator Tool\Event Viewer, then expand to Windows log
System and Applications and Services\Microsoft\Windows\VPN-Client, see if there're some valuable information recorded.
Troubleshooting Virtual Private Networking
http://technet.microsoft.com/en-us/library/cc302672.aspx#CommonVPNIssues
Yolanda Zhu
TechNet Community Support

My Macbook Pro suddenly won't stay connected to the internet.

My Macbook Pro recently has had problems staying connected to the Internet. Our other Macbook Pro is having the same problems. I have already spoken with with our ISP, AT&T. After trying several things, they said that it may have to do with Safari and that they couldn't suggest any settings changes to our browser because it might disqualify any warranties that we have on our Notebook if another company makes changes to it. I've spent hours and hours trying to resolve this and it's driving me nuts. Also my wireless HP Printer won't stay connected either. Not long ago AT&T sent us a new modem/router (all-in-one), that is why I called AT&T to see if it was the new modem. But come to think of it, I had called AT&T because of this connectivity issue and now I'm thinking that it wasn't them at all. Maybe it has to do with Apple. I'm a Apple lover, so please help!!!

Also my wireless HP Printer won't stay connected either.
Does that mean it won't stay connected to the network, or it's not reachable from your Mac? There's a difference.

I have Dreamweaver CS5 with Windows 8 and it won't stay connected to the server and it says I need flash plug in, please help

I have a Gateway computer with Windows 8 installed. I have installed Dreamweaver CS5 to manage my website and it won't stay connected to the server. It also won't play flash and says I need a flash plug in. Please help

#1 Try toggling Passive FTP on/off in your remote server's site definition.
#2 Except for a handful of gaming sites, Flash is a dead web technology. It's not supported by iPhone, iPad, iTouch, Android, etc... I don't recommend using Flash for anything these days. Better to use HTML5, CSS level 3 and JavaScript.
Nancy O.

Won't stay connected to network

Not sure if this is a Safari problem or internal with my Mac somehow. I have a G5 and I connect to a router for wireless internet. I also connect to my printer through the same router.
I've noticed sometimes when I exit safari and then come back to the computer later and click the Safari Icon it sometimes doesn't connect to the internet without me having to go through a "Network Diagnostic" test. Then usually what happens is about half way through the diagnostics my internet home page will load, or I'll get to the end of the diagnostic and it says "your connection is working" and then the home page will appear.
The problem I have now is that my computer won't stay connected to my printer. If I try to print a document or photo it does not send it to the printer, however if I turn Safari on so I know I'm connected to the network then all of a sudden the printer will work.
I guess somehow my computer is automatically disconnecting from my network and I'm not sure why or how to fix it. I've gone into the network preferences an it always shows "airport" is on and I always show all "solid" in the little icon at the top that looks like a "fan".
Any thoughts here on why my comp doesn't seem to stay connected to the network?
Thank you.

HI,
Try updating your system software to 10.5.8 with the combo update available here.
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
After the installation, repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

My iMac won't stay connected to the internet, even though all other computers in my house stay connected

My iMac won't stay connected to the internet, even though all other computers in my house stay connected, and its connection is set up the same way my fiance's macbook is (his macbook is about three years older than my iMac). Every time my computer goes into sleep mode and I come back (even if it's mere seconds after giving the black screen) I have no internet connection. I discovered a workaround for it some time ago, but now that is working less and less, and now my computer randomly disconnects WHILE I'm actively using the internet. Just a few minutes ago, the connection refused to come back until I restarted my computer, even though once again all other computers in the house were connected. The workaround I discovered before and which doesn't work as reliably now, is to click opne Airport at the top right of the screen, click "Open Network Preferences," then click "Assist me," then click "Diagnostics," and wait for everything to turn green again, signalling a connection.

Let's check the quality of your connection since signal strength alone does not insure a good connection. The "bars" that you see at the top of the iMac screen are there pretty much for show.
Hold down the option key on the iMac while you click on the Apple icon at the upper left corner of your screen and select System Profiler
Look down the list of items at the left of the window until you find the setting for Network, then click on AirPort.
In the window to the right, look for any listings of your wireless network name. You may possibly see two listings for the wireless network name.
We need for you to list the information that you see for Signal / Noise. These will be negative numbers. Post back with your findings and we will continue.
In the meantime, please move any cordless phones that you have or any other electronic devices that are near the iMac as far away as possible from the iMac.
If the iMac is located in a corner or an enclosed area, give it as much room as possible since the wireless antenna is on the back of the iMac and it needs to be able to "see" the room.
Anything that you can do to minimize the number of obstructions like walls or furniture etc between the iMac and the wireless router will help the cause as well.

Imac won't stay connected to wireless network

I recently moved and now my imac won't stay connected to my wireless network. Every other device connects just fine, so it's not the service, or the location, because devices are all in the same room.
Every time my computer goes to sleep it seems to completely forget how to connect to the internet. There is only one Network (mine) listed in preferred networks. The computer will connect only if I go to System Preferences and run through the Network Diagnostics to tell it exactly what to connect to. Each time it says my connection and internet are fine, which I know.
Please someone tell me how to get it to remember my network so I can stop going through the Diagnostics every time I want to use my internet.

Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
If that doesn't work try changing channels on your Router.

Native VPN PPTP client won't stay connected

Folks,
I have setup my VPN using the Mac OSX native PPTP VPN client to connect to my client's work network. However, it appears that it won't stay connected. I have been searching the net for answers. I can't find a definitely one. Does anyone have the same issue where you can share your solution with me please?
To be more specific, I have a Windows XP laptop and a Mac. I connect to the same VPN on both machines. The Windows XP laptop will stay connected while the mac will drop the connection randomly. This is particularly true when my Mac went to sleep and then wake up.
In my PPTP VPN setup, I have already uncheck the option "Disconnect when user logs out" option in the Advance setting.
Also, this appears to be Mac OSX issue because I have another client where I can use the Cisco AnyWhere VPN client to connect and the connection stays connected all the time including the time when my Mac went into sleep mode.
My mac is the new MacBook Pro with Retina display running Mountain Lion (The original OS is Lion and then upgraded to Mountain Lion) and I am using the Thunderbolt to Ethernet adapter to connect to my wire network. It doesn't make much difference even if I switch over to a Wireless connection. In both cases, the VPN just won't stay connected.
Can someone point me to the right direction as to where I can trouble shoot this please? Thanks.

Thanks sberman. In the article, it mentions something about VPN on Demand, where in the setup do you see this setup? I am in the Network setup area and I am not finding this. Also, if I turn on the "Use verbose loggin", where is the log file? Is it still the /var/log/ppp.log file
Also, one more thing, my main ethernet connection setting does not include a proxy setting. But my VPN setup includes a proxy setting. Do you think that I may need to update the main ethernet setting to add the proxy setup to it as well? But I don't want to keep updating the main ethernet connection network setting to switch between proxy or not. Any suggestion will be welcome.
Thanks.

I updated my iPhone 5 software and now it won't stay connected to wi-fi

I updated my iPhone 5 software and now it won't stay connected to wi-fi

Icloud uses you Apple ID. It one of the Key feature on the new ATV. Restart the ATV, if that doesn't work unplug it and restart it. It should resolve the issue

Apple Time Capsule Won't Stay Connected

After Verizon upgraded my router to the 9100EM my Apple Time Capsule Connects to the router but won't stay connected all the time. I have to go into router management console a couple of times a day and reboot it the restore connection. Time Capsule is connected to router by lan cable into port 1 of router. Time capsule set in bridge mode I believe. Just from time to time when I run Air Port Utility Time Capsule has green light but internet goes orange once i reboot I'm good for several hours then loses connection and have to reboot again. Tried looking for other settings to adjust but haven't found anything to help. If any body has any suggestions please help, it just gets old having to reset all the time

If you are using a Mac, which OS is installed?
Use Software Update to make sure you have all the latest updates.
Repair permissions.
Change your router (Airport) channel. Most times this all you have to do!

Safari5.1.8 drops off line, but airport stays connected, but window says you are not connected to internet?

safari5.1.8 drops off line, but airport stays connected, but window says you are not connected to internet? then a couple minutes later it reconnects. I am on an AT&T wireless.

my mac G4 does not have any problem with this. suspect it is safari, airport never drop off or turn off, just safari

Won't stay connected since upgrade

Hey gang,
Got a brand new iTouch last weekend and upgraded the SW to v3.1.2(7D11). Ever since then, it won't stay connected to my wireless at home once it's turned off. Turn it back on and enter in the passphrase and all is good. At work it seems to be fine. Not sure what to look for.
Thanks in advance
Toy4rick

Well, it looks like it's being caused by SSID not being broadcast. As long as I have it broadcasting, all is well, as soon as I disable this, it won't connect after a restart.
This is my second iTouch, the first one had a bunch of dust appear under the glass and the Apple store replaced it no qualms, couldn't be happier My first iTouch didn't act this way and was running the previous version of software. It wasn't until i got a new unit and updated to this version that the issue started.
I have 2 other iTouch's in the home with the older software and they don't have any issues with SSID not being broadcasted.
Any additional thoughts?
Toy4Rick

AirPort WiFi on 2010 MBA won't stay connected to 5Ghz band since latest 10.6.7 update.

I updated my 2010 MBA 11" to the latest/greatest of everything in prep for Lion. So, I now have 10.6.7 of course. But ever since the updates, I noticed that my wifi on the MBA won't stay connected to the 5 Ghz band of my router. It'll connect fine to the 2.4 Ghz channel, so its not a big deal, but this is my first weird issue with the Mac (I converted in January), so of course it bugs me.
Anybody else having the same issue? Since Lion is around the corner, I can get by using the 2.4 band and hope its not an issue in Lion. But part of me wants to try to use my TIme Machine backup right before I updated to see if it is truly related to the updates.
Thanks!
John

Forgot to mention, I have a Netgear WNDR3400 N600 Dual Band Wireless Router. But like I mentioned, it has worked perfectly for 5 months previously.

Printer won't stay connected in Windows 8

Similar Messages

Maybe you are looking for