Printer won't work with elements 9

using elements 9...up until today had no problem connecting to my Epson Stylus Photo 1400. Now printer makes noises and then stops. However printer functions when printing from web-sites..so must be the connection betwenn elements and printer. What to do?

I guess from reading your message that Mavericks just hasn't got the drivers from HP to support this.  You don't specify what model printer you are using but I would suggest that this issue here is that either your PH printer is an old model or that you need to go looking towards the HP website and see what their responses are to providing the appropriate drivers.  You're not alone sadly and this is the problem when you move forward with the times and the ancilliary equipment you have come to rely on is no longer up to speed.  Good luck!

Similar Messages

  • Printer won't work with Mavericks

    Since downloading Mavericks, my HP printer won't work--at the office AND at home.  Please help.
    I've done everything I think was suggested from removing HP software, reseting printing, factory default of printer--everything!
    Please help!

    I guess from reading your message that Mavericks just hasn't got the drivers from HP to support this.  You don't specify what model printer you are using but I would suggest that this issue here is that either your PH printer is an old model or that you need to go looking towards the HP website and see what their responses are to providing the appropriate drivers.  You're not alone sadly and this is the problem when you move forward with the times and the ancilliary equipment you have come to rely on is no longer up to speed.  Good luck!

  • Printer won't work with Yosemite

    kodak printer will not work with Yosemite. It was fine before. Anyone have the same problem with a Kodak printer. Weirdly I can scan a document but not print anything at all. It says printing but nothing comes out!

    Hi PBS,
    This video helped me out.
    Printer help with Yosemite

  • HP Printer Won't Work With Snow Leopard

    Hi, I hope you can help. I have just upgraded to Snow Leopard and my HP printer won't print. It is a Laserjet 1015 and new drivers are meant to be on the list with SN. My iMac recognises the printer is there but cannot make a connection. I am networking it using an Airport which is working fine. I have even reset the printer system and deleted the printer and added it again but after starting to process a document to print it just stops.
    The other thing is that Pages v 1.0.2 also won't work now. I can open the software, but it can't open any existing documents nor will it open a new blank template. This is my work software (I'm a journalist) so this is a real worry. Any suggestions??
    Thanks so much
    Jo

    Hi JoJoh,
    I can't be of much help with the printer but I just checked my "Pages" and my version number is 4.0.2. I'm using iWork 09. Perhaps you need to update? I just checked the "Snow Leopard Compatible" site and found "Apple Pages 4.0.2" is compatible. It didn't mention 1.0.2. I'm so sorry. That's pretty rough when it's how you make your living.
    As for the printer, I have an HP Photosmart C4580 which wouldn't print. I finally just deleted all the printers on my MacBook and used my Snow Leopard install disk and selected the "Optional Install" which allowed me to just reinstall the printers. My HP is now working fine. I do feel like this is just a work-around until HP gets things sorted out. I say that because even though my HP now works, the only place it shows up is in my users folder. It's not in my Applications folder, but as long as it works for now, I don't care.
    Hope I was of some help to you. Best of luck!

  • Canon MF4207 MultiFunction Laser Printer won't work with TCP/IP

    Bought this printer. Very cool. Great quality. Fast...
    But, we can't even get a "ping" via TCP/IP. We're about to take it back. Looking at other threads, do Canon's not work with Mac's on networks (even though their documentation says they do)?
    Anyone with ideas?
    Running both from a ether wired imac and a wireless powerbook. All on 10.4.?.
    Thanks
    Doug

    First of all, Canon's designed for network printing do work. Most of the posts you have probably seen are for printers that haven't been designed for network printing, yet the users are still trying to configure them this way???
    Looking at the manual, there a couple of things you need to do to print across a network.
    As Kappy suggested, the first thing you need to do is configure the IP address of the MF4270. By default, the machine is set to DHCP, but if you don't have something on your network allocating addresses, then it will be set to all zero's.
    Now you mention it won't ping, so we could make the assumption that you have set an appropriate IP address for your network and the machine is not responding. To be sure that you do have this set to the same subnet as your Mac network, print a User Data List.
    Additional Functions > 11. Report Settings > OK > 2. List Print > 9. User Data List > OK
    This will show you the IP address and subnet mask. It will also show you if LPD and RAW (Port 9100) print services have been enabled.
    If you do not have an appropriate IP address set, then you need to press Additional Functions and scroll to 12. System Settings.
    Press OK and scroll to 2. Network Settings then press OK.
    This will show TCP/IP Settings. Press OK.
    Scroll to 1. IP Address Auto and press OK. It will show ON. Scroll so it shows OFF and then press OK.
    Now scroll to 2. IP Address and press OK. This will show the current address. Using the numeric keypad enter the desired IP address for the printer. Press OK to complete.
    Now scroll to 3. Subnet Mask and input the appropriate subnet mask and press OK.
    Now you can press the Stop/Reset key to exit and maybe print another User Data list to ensure the settings you entered are correct.
    Now that you have the IP address set, you need to install the Canon UFR2 v1.60 driver for Mac OS X. If this version didn't come with the machine you can download it from the Canon web site.
    Once you have run this driver installer you are ready to add the printer. Open the Printer Setup Utility and select Add. Select More Printers. Now select 'Canon IP (UFR II)'. This will show a pane allowing you to enter the IP address of the printer. It also wants a queue name. Enter LP for the queue name. Click Add and wait as the driver software will now query the printer and auto select the appropriate ppd. Once this is complete the MF4270 will appear in the Printer List.

  • My HP Photosmart 385 printer won't work with my operating system - Windows Vista Ultimate. Why not?

    Is there a driver that I can dowload so my HP Photosmart 385 printer will work with my Windows Vista Ultimate operating system?

    Hey Alyssa426,
    Welcome to the HP Forums!
    Since the installation disk does not support Windows 8.1, I would suggest trying to download, and install the drivers directly from the HP Support website. I have included a link to the 'HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driver'. Once the software is downloaded, open the software, and follow through the on screen instructions for installation.
    Please let me know the outcome of installing the software.
    Thank you.
    I worked on behalf of HP

  • Printer won't work with Snow Leopard

    Hello,
    I have been using a Lexmark colour printer with my iMac. I upgraded to Snow Leopard and since then my printer does not work. Does anyone have a solution to this as I don't really want to buy another printer, especially as I have bought a new stock or print cartridges for the printer.
    Many thanks to anyone who can help.
    Kind regard, Maggi

    Hello Maggi:
    This is a list of OS X supported printer drivers:
    http://support.apple.com/kb/HT3669#lexmark
    Since you did not indicate your specific printer model, I cannot make further suggestions.
    If your printer is not listed, some people have had success with generic Gutenberg drivers.
    Barry

  • I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

    I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true.  . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . .     STACK: / [    -mark-   /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

    Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
    Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
    Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

  • My Printer won't work with windows vista

    I just got a new computer that runs windows vista and I can not get my printer to work it is a photosmart 1115. How can I get this to work it is my favorite printer

    If this is the Photosmart 1115 that uses the #45 and #78 cartrdiges then use the "Add Printer" command in the Printers folder to add the Deskjet 970 printer.  The Deskjet 970 driver is compatible with the Photosmart 1115 for printing although the functionality of reading the card slots back to the computer will not be available.
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Printer won't work with Ethernet cable connected to AEBS

    I've been using my AEBS with built-in modem for a year with no problems. Today I got a DSL modem (finally available in my area) and when I connected the ethernet cable from the DSL modem to my AEBS, my printer stopped working. It now gives the following error message: "Printing Problem - the process "mdns" stopped unexpectedly with status 1". The printer is still available from the printer setup utility and I tried deleting and reinstalling the printer
    I have tried several different variations of restarting the modem and AE in various orders, but no joy. However, when I disconnect the ethernet cable from the AE and restart it, I can print fine.
    I have three computers on the network (G4 MDD PowerMac, G5 iMac, and C2D MPB) and I get the same error message from all three.
    Any suggestions (perhaps an interpretive dance to the network gods?) on how to get both the DSL and printer to play nice at the same time??
    Thanks, Eric

    see if anything in the Printer Troubleshooting Guide helps.

  • Printer won't work with either computer on the wireless network

    Yesterday I went to the HP website and downloaded the rcommended drivers associated with my Win 7 computer and Officejet 7310 printer.  Ever since I can't print at all.  My other laptop connected to the network (Win Vista) won't print either.  My computer indicates that my printer is offline.  How do I get these devices talking to one another again
    This question was solved.
    View Solution.

    Download and run this diagnostic, it should tell us what is going on.
    The IP address looks right for the printer.  The DNS server and gateway (router IP address) are often the same at x.x.x.1
    I suspect a firewall issue, but let's see what the diagnostic tells us.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP 7400 printer won't work with Snow Leopard.

    I recently updated my iMac to Snow Leopard and now I can't print to my HP OfficeJet 7400.  I know the printer works, as I can print from my laptop which is on Windows 7.  Any recommendations to get my iMac with Snow Leopard to print to my 7400?

    Have you downloaded the HP 10.6 printer drivers?  http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76195-1 &cc=us&dlc=en&lc=en&os=219&product=391194&sw_lang=

  • Printer won't work with lion os x

    I just upgraded to Lion X and now my Canon MX860 printer wont work. 

    The Canon website has drivers for Lion
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_s eries/pixma_mx860#DriversAndSoftware

  • Printer won't work with new router

    When I installed my new E3200 router, my printer would no longer work from my remote lap top. It works from my desktop where it is installed, but not from the lap top.

    Turn off file and print sharing on all computers, reboot.  Now enable file and print sharing and reinstall the printer from the laptop.  Turn off all firewalls for now.

  • My HP Deskjet F4280 printer won't work with my new HP 2000 laptop w/ windows 8.1

    I have a HP Deskjet F4280 printer. I recently bought a HP 2000 laptop. I put the printers install disk in the laptop to set up my printer but it says windows 8 doesn't support that printer! It also does say that windows 2000, XP, Vista are supported on the disk for the printer...help! Is there a work around?

    Hey Alyssa426,
    Welcome to the HP Forums!
    Since the installation disk does not support Windows 8.1, I would suggest trying to download, and install the drivers directly from the HP Support website. I have included a link to the 'HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driver'. Once the software is downloaded, open the software, and follow through the on screen instructions for installation.
    Please let me know the outcome of installing the software.
    Thank you.
    I worked on behalf of HP

Maybe you are looking for

  • IMac super slow and now will NOT boot up

    My iMac G5 (non-intel, non-isight) has been slow for a few days. I've tried to isolate it to an application but couldn't really find anything. We didn't install any new applications before it started slowing down. So I ran software update, installed

  • Can't launch iTunes on iPad WiFi

    I've had the 16GB WiFi model since launch, and suddenly today when I try to launch iTunes, it comes up blank (I see the navigation icons at the bottom) for about a second then immediately launches the App Store instead. Some details: - The account th

  • Any fm that replaces hr_read_t588m

    Hi all   Can anybody please tell me if there is any function module that replaces hr_read_t588m.As this fm is not there in r/3 i want a fm that does the similar job.. Thanks in advance vijaya

  • Issue with gotoAndPlay

    Hi all, Hoping someone will know the answer / solution for this issue I am having. I have a three MC I want to play randomly every time the flash file is executed. Along with the MC I have three buttons so the user can switch between each. On the ini

  • TS3297 keep receiving this error message -42408

    keep receiving this error message: "We could not complete your iTunes Store request. An unknown error occurred (-42408). I am sure I am using my correct Apple ID and password as I can log in without a problem but my iTunes keeps sending me this messa