Printer won't work with Mavericks

Since downloading Mavericks, my HP printer won't work--at the office AND at home.  Please help.
I've done everything I think was suggested from removing HP software, reseting printing, factory default of printer--everything!
Please help!

I guess from reading your message that Mavericks just hasn't got the drivers from HP to support this.  You don't specify what model printer you are using but I would suggest that this issue here is that either your PH printer is an old model or that you need to go looking towards the HP website and see what their responses are to providing the appropriate drivers.  You're not alone sadly and this is the problem when you move forward with the times and the ancilliary equipment you have come to rely on is no longer up to speed.  Good luck!

Similar Messages

  • Printer won't work with Yosemite

    kodak printer will not work with Yosemite. It was fine before. Anyone have the same problem with a Kodak printer. Weirdly I can scan a document but not print anything at all. It says printing but nothing comes out!

    Hi PBS,
    This video helped me out.
    Printer help with Yosemite

  • Flash won't work with Maverick

    I have tried installing flash several times, downloading updates, managers and still can not get flash to work with Maverick.  Is there an update I'm missing or does it just not work with Maverick?

    Works just fine. In Safari, Firefox, Opera, iCab, OmniWeb, SeaMonkey, and Chrome.
    I assume you're suing Safari:
    If Plug-ins are allowed, then I recommend doing a "clean install" using the latest FULL installer: Flash Player 120.0.047 (Mac OS X) and the illustrated instructions here: http://forums.adobe.com/thread/1343084

  • What apps won't work with maverick?

    i am about to update to Maverick, aere there any apps that won't function with Maverick?

    It is far from a complete list but http://roaringapps.com/apps:table is a good starting point. It should not be considered 100% accurate.
    Uninstall any and all "anti-virus" or "cleaning" apps that should not be installed on any Mac, and back up your system as a precaution against the unexpected. Merely having a backup seems to preclude the need to ever require one.

  • HP Printer Won't Work With Snow Leopard

    Hi, I hope you can help. I have just upgraded to Snow Leopard and my HP printer won't print. It is a Laserjet 1015 and new drivers are meant to be on the list with SN. My iMac recognises the printer is there but cannot make a connection. I am networking it using an Airport which is working fine. I have even reset the printer system and deleted the printer and added it again but after starting to process a document to print it just stops.
    The other thing is that Pages v 1.0.2 also won't work now. I can open the software, but it can't open any existing documents nor will it open a new blank template. This is my work software (I'm a journalist) so this is a real worry. Any suggestions??
    Thanks so much
    Jo

    Hi JoJoh,
    I can't be of much help with the printer but I just checked my "Pages" and my version number is 4.0.2. I'm using iWork 09. Perhaps you need to update? I just checked the "Snow Leopard Compatible" site and found "Apple Pages 4.0.2" is compatible. It didn't mention 1.0.2. I'm so sorry. That's pretty rough when it's how you make your living.
    As for the printer, I have an HP Photosmart C4580 which wouldn't print. I finally just deleted all the printers on my MacBook and used my Snow Leopard install disk and selected the "Optional Install" which allowed me to just reinstall the printers. My HP is now working fine. I do feel like this is just a work-around until HP gets things sorted out. I say that because even though my HP now works, the only place it shows up is in my users folder. It's not in my Applications folder, but as long as it works for now, I don't care.
    Hope I was of some help to you. Best of luck!

  • Canon MF4207 MultiFunction Laser Printer won't work with TCP/IP

    Bought this printer. Very cool. Great quality. Fast...
    But, we can't even get a "ping" via TCP/IP. We're about to take it back. Looking at other threads, do Canon's not work with Mac's on networks (even though their documentation says they do)?
    Anyone with ideas?
    Running both from a ether wired imac and a wireless powerbook. All on 10.4.?.
    Thanks
    Doug

    First of all, Canon's designed for network printing do work. Most of the posts you have probably seen are for printers that haven't been designed for network printing, yet the users are still trying to configure them this way???
    Looking at the manual, there a couple of things you need to do to print across a network.
    As Kappy suggested, the first thing you need to do is configure the IP address of the MF4270. By default, the machine is set to DHCP, but if you don't have something on your network allocating addresses, then it will be set to all zero's.
    Now you mention it won't ping, so we could make the assumption that you have set an appropriate IP address for your network and the machine is not responding. To be sure that you do have this set to the same subnet as your Mac network, print a User Data List.
    Additional Functions > 11. Report Settings > OK > 2. List Print > 9. User Data List > OK
    This will show you the IP address and subnet mask. It will also show you if LPD and RAW (Port 9100) print services have been enabled.
    If you do not have an appropriate IP address set, then you need to press Additional Functions and scroll to 12. System Settings.
    Press OK and scroll to 2. Network Settings then press OK.
    This will show TCP/IP Settings. Press OK.
    Scroll to 1. IP Address Auto and press OK. It will show ON. Scroll so it shows OFF and then press OK.
    Now scroll to 2. IP Address and press OK. This will show the current address. Using the numeric keypad enter the desired IP address for the printer. Press OK to complete.
    Now scroll to 3. Subnet Mask and input the appropriate subnet mask and press OK.
    Now you can press the Stop/Reset key to exit and maybe print another User Data list to ensure the settings you entered are correct.
    Now that you have the IP address set, you need to install the Canon UFR2 v1.60 driver for Mac OS X. If this version didn't come with the machine you can download it from the Canon web site.
    Once you have run this driver installer you are ready to add the printer. Open the Printer Setup Utility and select Add. Select More Printers. Now select 'Canon IP (UFR II)'. This will show a pane allowing you to enter the IP address of the printer. It also wants a queue name. Enter LP for the queue name. Click Add and wait as the driver software will now query the printer and auto select the appropriate ppd. Once this is complete the MF4270 will appear in the Printer List.

  • My epson Perfection V330 scanner won't work with mavericks

    I updated to Mavericks and now my Esson scanner won't work.  I found a download for a driver on the Epson site but it doesn't seem to want to download - either that or it's taking hours to download.

    Hi,
    As listed on Epson's site the drivers are available via Apple Software Update.
    Ensure the scanner is powered on and directly connected to your Mac, then try following the steps below:
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14551&BV_UseBVCooki e=yes&infoType=Downloads&platform=OSF_M_X7
    Now try opening the Image Capture application within the Applications folder and check if your scanner appears.
    If the scanner cannot be located yet try restarting your Ma and check for any difference.
    If the same still persists try resetting the printing system, then try adding the scanner again as listed on Epson's site.
    You may reset the printing system as following:
    http://support.apple.com/kb/PH11143
    Finally, if you still having issue getting the drivers from ASU try installing the package below and try scanning from Image Capture again:
    http://support.apple.com/kb/DL899
    Shlomi

  • My HP Photosmart 385 printer won't work with my operating system - Windows Vista Ultimate. Why not?

    Is there a driver that I can dowload so my HP Photosmart 385 printer will work with my Windows Vista Ultimate operating system?

    Hey Alyssa426,
    Welcome to the HP Forums!
    Since the installation disk does not support Windows 8.1, I would suggest trying to download, and install the drivers directly from the HP Support website. I have included a link to the 'HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driver'. Once the software is downloaded, open the software, and follow through the on screen instructions for installation.
    Please let me know the outcome of installing the software.
    Thank you.
    I worked on behalf of HP

  • Printer won't work with Snow Leopard

    Hello,
    I have been using a Lexmark colour printer with my iMac. I upgraded to Snow Leopard and since then my printer does not work. Does anyone have a solution to this as I don't really want to buy another printer, especially as I have bought a new stock or print cartridges for the printer.
    Many thanks to anyone who can help.
    Kind regard, Maggi

    Hello Maggi:
    This is a list of OS X supported printer drivers:
    http://support.apple.com/kb/HT3669#lexmark
    Since you did not indicate your specific printer model, I cannot make further suggestions.
    If your printer is not listed, some people have had success with generic Gutenberg drivers.
    Barry

  • I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

    I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true.  . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . .     STACK: / [    -mark-   /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

    Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
    Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
    Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

  • My Canon Pixma iP8500 printer has stopped working with Mavericks

    Hi, my Canon Pixma iP8500 printer has stopped working in the past few days and I made no alterations that could explain why this might happen. I am using OS X 10.9.5 Mavericks on a Mac Pro desktop computer. I can print a test page when selecting it on my Canon Printer Utility from my desktop so it seems that there is contact between the computer and the printer but it will not print from iPhoto, Preview or Mail. When I select Print from any of these nothing happens and there is nothing on the Print List. I have checked the Printers & Scanners in my System Preferences and my Canon iP8500 is listed and highlighted as  Idle Default and Share this printer is ticked. I have tried deleting this printer then adding it but it still will not print. I would appreciate any helpful suggestions bearing in mind that I am fairly elderly and have a limited knowledge of IT and some of the terminology.
    Thank you,
    Colin.

    Hi, might try this...
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Printer does not work with maverick

    canon mf 6595 no longer works with Marverick

    Jacques Levesque wrote:
    I went to the Canon Site and download the good driver. I delete it, install again but nothing work!
    The new UFR2 has two requirements.
    1. You must use the "Line Printer Daemon-LPD" protocol. This driver does not support IPP, which is set as the default.
    2. When you add the ADV6065 and ADV8085, you must select the entry that shows "Canon iR-ADV 6055/6065" and "Canon iR-ADV 8085/8095". Do not select the entry that shows UFR II in the name. This is the PPD for the older UFR v2.43 driver which does not work on 10.9.

  • My Printer won't work with windows vista

    I just got a new computer that runs windows vista and I can not get my printer to work it is a photosmart 1115. How can I get this to work it is my favorite printer

    If this is the Photosmart 1115 that uses the #45 and #78 cartrdiges then use the "Add Printer" command in the Printers folder to add the Deskjet 970 printer.  The Deskjet 970 driver is compatible with the Photosmart 1115 for printing although the functionality of reading the card slots back to the computer will not be available.
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Printer won't work with Ethernet cable connected to AEBS

    I've been using my AEBS with built-in modem for a year with no problems. Today I got a DSL modem (finally available in my area) and when I connected the ethernet cable from the DSL modem to my AEBS, my printer stopped working. It now gives the following error message: "Printing Problem - the process "mdns" stopped unexpectedly with status 1". The printer is still available from the printer setup utility and I tried deleting and reinstalling the printer
    I have tried several different variations of restarting the modem and AE in various orders, but no joy. However, when I disconnect the ethernet cable from the AE and restart it, I can print fine.
    I have three computers on the network (G4 MDD PowerMac, G5 iMac, and C2D MPB) and I get the same error message from all three.
    Any suggestions (perhaps an interpretive dance to the network gods?) on how to get both the DSL and printer to play nice at the same time??
    Thanks, Eric

    see if anything in the Printer Troubleshooting Guide helps.

  • Printer won't work with elements 9

    using elements 9...up until today had no problem connecting to my Epson Stylus Photo 1400. Now printer makes noises and then stops. However printer functions when printing from web-sites..so must be the connection betwenn elements and printer. What to do?

    I guess from reading your message that Mavericks just hasn't got the drivers from HP to support this.  You don't specify what model printer you are using but I would suggest that this issue here is that either your PH printer is an old model or that you need to go looking towards the HP website and see what their responses are to providing the appropriate drivers.  You're not alone sadly and this is the problem when you move forward with the times and the ancilliary equipment you have come to rely on is no longer up to speed.  Good luck!

Maybe you are looking for

  • Premiere crashing. Using Blackmagic Intensity Pro HDV sequence

    Hi. I'm editing with Premiere. I'm using an intensity pro card(blackmagic design) with Q4000 Nvidia Graphics card. It keeps crashing on me. More so with the HDV footage I'm editing. I have included my computer specs as well as media info of my source

  • When converting from docx to pdf, some text boxes are missing. Why?

    I have a large docx file with many text boxes.  The boxes have fill and borders.  When I convert to pdf several text boxes are missing.  The text is there but the box is missing.  How can I prevent this from happening?

  • Report - Used by user

    Hello all, Is there any table from i can check 1. Report is executed by how many users 2. Report not used for how long etc. Thanks

  • Query Result with pagination problem

    I have a region that has a search field with a "Go" button which runs a report based on a SQL Query(PL/SQL function body returning SQL query). Works great and displays the default of 15 rows with a pagination scheme of "Row Ranges X to Y of Z(with pa

  • FM for pulsing of status bar

    Hi I am looking for function module to make sap session bar in windows pulsing. the reason is that when user has few sap sessions open, and in one of them sth happens (my event), this session should be pulsing in order the user to see it. I found FM