Printer won't work with new router

When I installed my new E3200 router, my printer would no longer work from my remote lap top. It works from my desktop where it is installed, but not from the lap top.

Turn off file and print sharing on all computers, reboot. Now enable file and print sharing and reinstall the printer from the laptop. Turn off all firewalls for now.

Similar Messages

My Apple TV (2) won't work with new Router.

Okay,
So I have a new router and everything works but streaming my movies to my AppleTV. I can access Netflix and other apps but not my own iTunes. I have no clue as to why. This is what I have done so far:
I have rebooted my computer, AppleTV, and my new router. No luck
I have reset my appleTV. No luck.
I have reset my router. No luck
I have tried using other apps (netflix) to see if it works. No luck
I have pulled power cords out on appleTV, Router, and my computer...silly I know. No luck
Both the PC and the AppleTV are on the same 2.5Ghz No luck
I have turned off my iTunes, wich my appleTV then tells me to turn it on, and turned homesharing back on. No luck
itunes and appleTV are up to date. No luck
I have made sure that my region, time zone, etc are all the same for my PC and my AppleTV No luck
Toss throught window. Thinking about it
Any ideas?

Hey Huinatnaaq,
Thanks for using Apple Support Communities.
The following settings are recommended for all Macs and iOS devices.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Have a nice day,
Mario

Elements 13 won't work with new camera, it won't update to raw 8.7.1

Elements 13 won't work with new camera, it won't update to raw 8.7.1. I have downloaded the patch, it is installed but the old version is this there in elements. Thanks, esther

OK I think the problem is probably related to the platform swap and you may need your account re-set. Only Adobe staff can do that. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number and previous case number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

Printer won't work with Mavericks

Since downloading Mavericks, my HP printer won't work--at the office AND at home. Please help.
I've done everything I think was suggested from removing HP software, reseting printing, factory default of printer--everything!
Please help!

I guess from reading your message that Mavericks just hasn't got the drivers from HP to support this. You don't specify what model printer you are using but I would suggest that this issue here is that either your PH printer is an old model or that you need to go looking towards the HP website and see what their responses are to providing the appropriate drivers. You're not alone sadly and this is the problem when you move forward with the times and the ancilliary equipment you have come to rely on is no longer up to speed. Good luck!

Printer won't work with Yosemite

kodak printer will not work with Yosemite. It was fine before. Anyone have the same problem with a Kodak printer. Weirdly I can scan a document but not print anything at all. It says printing but nothing comes out!

Hi PBS,
This video helped me out.
Printer help with Yosemite

Panasonic KX-p7105 printer won't work on new mac - has disk for Mac OS 9.2

I finally switched to a Mac and am so disappointed that my great laser printer won't work. It prints pages of gibberish. My driver disk is for an older version of mac and won't open. I get a message saying "You can't open the network setup tool because the classic environment is no longer supported." I've since searched the net for drivers and can only find windows versions. Is this hopeless? Should I return my Mac (I'm still within the 14 days and don't want to buy another laser printer).
Any options?

Here's what John was talking about:
http://openprinting.org/show_printer.cgi?recnum=Panasonic-KX-P7105
You need the 3-part hpijs driver:
http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs
(these are standard Mac installers - .dmg disk image files)

Printer not working with new router

I have a new router and my laptop with Windows XP is working Ok
My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
What can I do

Hi @Jobrig,
Welcome to the HP Forums!
I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
In the meantime, please see the following:
This printing guide, Print Jobs are Stuck in the Print Queue.
This website, HP Wireless Printing Center, may also help.
Hope these guides will help you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true. . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . . STACK: / [ -mark- /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

HP Printer Won't Work With Snow Leopard

Hi, I hope you can help. I have just upgraded to Snow Leopard and my HP printer won't print. It is a Laserjet 1015 and new drivers are meant to be on the list with SN. My iMac recognises the printer is there but cannot make a connection. I am networking it using an Airport which is working fine. I have even reset the printer system and deleted the printer and added it again but after starting to process a document to print it just stops.
The other thing is that Pages v 1.0.2 also won't work now. I can open the software, but it can't open any existing documents nor will it open a new blank template. This is my work software (I'm a journalist) so this is a real worry. Any suggestions??
Thanks so much
Jo

Hi JoJoh,
I can't be of much help with the printer but I just checked my "Pages" and my version number is 4.0.2. I'm using iWork 09. Perhaps you need to update? I just checked the "Snow Leopard Compatible" site and found "Apple Pages 4.0.2" is compatible. It didn't mention 1.0.2. I'm so sorry. That's pretty rough when it's how you make your living.
As for the printer, I have an HP Photosmart C4580 which wouldn't print. I finally just deleted all the printers on my MacBook and used my Snow Leopard install disk and selected the "Optional Install" which allowed me to just reinstall the printers. My HP is now working fine. I do feel like this is just a work-around until HP gets things sorted out. I say that because even though my HP now works, the only place it shows up is in my users folder. It's not in my Applications folder, but as long as it works for now, I don't care.
Hope I was of some help to you. Best of luck!

Hp Photosmart not working with new router

My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

@Ann99, welcome to the forums
I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
I have some questions and some things for you to try.
1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
2. What did tech support determine the issue was when you called them?
3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
The Printer Is Not Found During a Wireless Network Installation
4. What Operating System are you running on your computer?
5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
Please let me know all of the information and results from your troubleshooting above!
Have a terrific day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer won't work with Snow Leopard

Hello,
I have been using a Lexmark colour printer with my iMac. I upgraded to Snow Leopard and since then my printer does not work. Does anyone have a solution to this as I don't really want to buy another printer, especially as I have bought a new stock or print cartridges for the printer.
Many thanks to anyone who can help.
Kind regard, Maggi

Hello Maggi:
This is a list of OS X supported printer drivers:
http://support.apple.com/kb/HT3669#lexmark
Since you did not indicate your specific printer model, I cannot make further suggestions.
If your printer is not listed, some people have had success with generic Gutenberg drivers.
Barry

Canon MF4207 MultiFunction Laser Printer won't work with TCP/IP

Bought this printer. Very cool. Great quality. Fast...
But, we can't even get a "ping" via TCP/IP. We're about to take it back. Looking at other threads, do Canon's not work with Mac's on networks (even though their documentation says they do)?
Anyone with ideas?
Running both from a ether wired imac and a wireless powerbook. All on 10.4.?.
Thanks
Doug

First of all, Canon's designed for network printing do work. Most of the posts you have probably seen are for printers that haven't been designed for network printing, yet the users are still trying to configure them this way???
Looking at the manual, there a couple of things you need to do to print across a network.
As Kappy suggested, the first thing you need to do is configure the IP address of the MF4270. By default, the machine is set to DHCP, but if you don't have something on your network allocating addresses, then it will be set to all zero's.
Now you mention it won't ping, so we could make the assumption that you have set an appropriate IP address for your network and the machine is not responding. To be sure that you do have this set to the same subnet as your Mac network, print a User Data List.
Additional Functions > 11. Report Settings > OK > 2. List Print > 9. User Data List > OK
This will show you the IP address and subnet mask. It will also show you if LPD and RAW (Port 9100) print services have been enabled.
If you do not have an appropriate IP address set, then you need to press Additional Functions and scroll to 12. System Settings.
Press OK and scroll to 2. Network Settings then press OK.
This will show TCP/IP Settings. Press OK.
Scroll to 1. IP Address Auto and press OK. It will show ON. Scroll so it shows OFF and then press OK.
Now scroll to 2. IP Address and press OK. This will show the current address. Using the numeric keypad enter the desired IP address for the printer. Press OK to complete.
Now scroll to 3. Subnet Mask and input the appropriate subnet mask and press OK.
Now you can press the Stop/Reset key to exit and maybe print another User Data list to ensure the settings you entered are correct.
Now that you have the IP address set, you need to install the Canon UFR2 v1.60 driver for Mac OS X. If this version didn't come with the machine you can download it from the Canon web site.
Once you have run this driver installer you are ready to add the printer. Open the Printer Setup Utility and select Add. Select More Printers. Now select 'Canon IP (UFR II)'. This will show a pane allowing you to enter the IP address of the printer. It also wants a queue name. Enter LP for the queue name. Click Add and wait as the driver software will now query the printer and auto select the appropriate ppd. Once this is complete the MF4270 will appear in the Printer List.

1st Gen iPod Mini won't work with new version iTrip

Hello all,
I cannot get my new iTrip (which connects to the bottom of the iPod) to work with my girlfriends iPod mini 1st generation. The new iTrip works fine on my video iPod but not on her mini.
We had the original iTrip and that worked fine but nothing is happening at all when the music is playing and the iTrip is connected. Anything i need to do or install to get this working? I have tried to search the discussions but failed to find a similar problem.
Any help or info will be much appreciated.
Many thanks.

Ah, i seemed to have fixed it! Well i've been trying for a few weeks now to sort this out and as soon as i put up a post it works. Oh well at least its working now. It seems like that the iPod needs to be playing BEFORE the iTrip is plugged in the turn it on.
I'll get me coat...

My HP Photosmart 385 printer won't work with my operating system - Windows Vista Ultimate. Why not?

Is there a driver that I can dowload so my HP Photosmart 385 printer will work with my Windows Vista Ultimate operating system?

Hey Alyssa426,
Welcome to the HP Forums!
Since the installation disk does not support Windows 8.1, I would suggest trying to download, and install the drivers directly from the HP Support website. I have included a link to the 'HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driver'. Once the software is downloaded, open the software, and follow through the on screen instructions for installation.
Please let me know the outcome of installing the software.
Thank you.
I worked on behalf of HP

Ipod Touch won't work with talktalk router :(

There are a lot of posts on here about people's itouch not working with certain wifi areas, I think this is one of those but am praying someone out there has an answer and I do not have to wait for an apple update.
I have used my itouch in a few different public wifi zones but cannot connect to my home secured network, it just says unable to join the network 'TalkTalk***'. I know the itouch works online and know the wifi works at home because a laptop, psp & Wii all work off it. Anyone else had this problem and managed to solve it???
Thanks in advance
LlanelliP

Hey there,
Glad to hear we're getting closer. Looks like you're connected to the network, just not able to utilize it's internet connection.
Let's check your iPod's IP addres. Tap Settings > Wi Fi and look for your network. To the right, there's a blue circle with a white arrow in it. Tap that circle. If the IP address starts out with 169.x.x.x, it is a self-assigned IP address. Since it came from the iPod, and not the router, it can't be used.
I would recommend resetting your iPod's network settings:
Settings > General > Reset > Reset Network Settings
When the iPod restarts, reconnect it to your network and try Safari again.
If it still isn't working, try powercycling your router and resetting those settings at the same time.
1. Turn off the router
2. Reset the network settings again, as indicated above
3. Turn the router back on
4. Reconnect the iPod to the network
If it still isn't working, let's check your iPod's software version.
Settings > General > About
If you've upgraded to 2.0, the latest version is 2.0.2. If you haven't upgraded, the latest version is 1.1.5. If you're not at either of those numbers, connect the iPod to your computer and use iTunes to check for software updates for the iPod.
Regarding the router settings, I'm not familiar with your router manufacturer. I'd check their website for instructions on that. I think at this point you wouldn't really need to change any settings, but just check for firmware updates.
CG

Printer won't work with new router

Similar Messages

Maybe you are looking for