Printer wont print. have new ink. trouble help say it ok but its not ok

I HAVE A HPPHOTO SMART C5180 ALL IN ONE PRINTER. IT JUST STOP PRINTING SO I CHECK THE INK REPLACE IT WITH NEW INK AN NOW IT JUST WONT PRINT I TROUBLE SHOOT IT AN IT SAY ITS OK BUT IT STILL DONT PRINT . I ALLSO REPLACE IT WITH NEW PAPER AN IT STILL DONT WORK

If resetting the que fails try deleting the printer and reinstalling (delete and allow your mac to find it again). This has worked for me in the past when I had trouble with the que.
If that fails you can search the HP website for a OS-X compatible driver for this printer model and try using that instead of the pre-installed driver selected by OS-X.
Good luck. Let us know how it turns out.

Similar Messages

I have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out

i have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out

That error shows up when a phone is jailbroken or you are trying to downgrade the iOS version. Neither of which is supported by apple.

I have camera raw installed in my program files but its not an option when i open up photoshop

I have camera raw installed in my program files but its not an option when i open up photoshop it is not an option in filters where can I find it?

What exact version of Photoshop? What exact version of the OS?
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I have 10.6.8 just purchased mountain lion, but its not compatible, what do I do?

I have a 10.6.8 just purchased mountain lion, but its not compatible what can I do?

What year, screen size, CPU speed and amount of RAM installed in your iMac?
If your iMac is not a mid-2007 iMac model or newer, you can't install OS X 10,8 Mountain Lion.
Tthe highest OS X version that can be installed is OS X 10.7 Lion.
You need to call Apple at 1-800-MYAPPLE ask for retail software sales and tell them you want to install OS X 10,7 Lion onto your iMac. They will give you a special download code to access the OS X 10.7 Lion download from the Mac App Store.
Good Luck!

Backup vhd file says "in use" but its not acually being used. or i dont have permission/ backup not happening by schedule

backup of 2012 server says I don't have permission?? im THE administrator.
unchecked archive
on other servers the file says in use.
file resides on a NAS.
I can move the file.(200gb+) but its still useless
does 2012 server just produce worthless backups sometimes???
I cant seam to get it to even follow its own set schedule its supposed to do it weekly, but its decided not to do it.
or only backup a few KB?

Could you please provide a little more information about your environment? What backup program are you using? What sort of VHD file are you trying to backup? VHD files are used for more than just virtual machines, so it is difficult to try
to diagnose a problem when we don't know what is being used. What sort of NAS?
.:|:.:|:. tim
server 2012 datacenter running the Microsoft backup utility.
the vhd is standard MS backup image.
im running a domain network and the nas is a netgear readynas in domain mode, i.e. user account has full folder privilages.
I have several 2012 servers all with subsequent VM's of ALL flavors. and my most recent backup did this anomaly on one of the 3 servers.
the backup is being done from the main domain admin act, and I am logged into that server as my account (cloned from domain admin) but logging in with actual administrator account does nothing for the errors.

In "about this mac" menu it shows that i have 4,6GB on movies on my mac. but its not true. help please

hi everybody.
when i go to the apple symbol on the top left corner , and than on more info and than on storage, itshows me that various things which are ok, but also it shows me that i have 4,6 GB movies on my mac somewhere. i'm 100% sure there is not a single movie on my mac. how can i find out where this movies are , if i have them. could it be that i hide them by accident? or why does he show me that???
please see screenshot so you know what i'm talking about.
please help me.
thanks

hi,
i just done that, but the only movies it showed me are the movies from my iphoto library. small movies i made with my camera. there are not enough movies to ad up to 4.6 GB.
sorry.
any other suggestions please

Where can i see whether employee is active or inactive? while i am running retirement action i have used lis9 operation for 0001,007,0008.but its not delimited.can anyone help me?

my client asked me " how to see emploee is active or inactive" for head count plz help me.

Hi,
Try to use 'COP' operation for the Infotypes. We can check in PA30 main screen the status of the employee provided if we have configured the status to be visible in the screen. We can also check in table PA0000 the status of the employee - STAT2 field will provide the status information.
Thanks,
Sriram

How do i install ios 5. i have updated my itunes and safari on pc but its not directing me to update ios

I am trying to install ios 5 update on my ipad. I am using a pc with vista. From what I understand it should direct me after updating itunes but it is not. Please help

With your iPad connected to selected on the left-hand side of iTunes, on the right-hand side on the Summary tab click the Check For Updates button.

Please help printer wont print a legal document

please help me printer wont print legal documents???

Hi,
which printer do you have is it an Officejet, laserjet or a Photosmart?
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

HT3500 I am using Mac 10.4.11 and I am having a problem when my printer wont print what I tell it too. Please Help

I am using Mac 10.4.11 and I am having a problem when my printer wont print what I tell it too. Please Help!

A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan

HP DeskJet Ink Advantage 1515 printer wont print after replacing black ink cartridge

Hello.
My HP DeskJet Ink Advantage 1515 printer has been working correctly since a year.
I had to replace both ink cartridges and I changed only the black one since I needed that one most.
But, the lights keep flashing and the printer wont print. Please help?

Hi @RRGS,
Welcome to the HP Forums!
I see that your HP DeskJet Ink Advantage 1515 printer will not print after replacing black ink cartridge, and your lights are still flashing. I am happy to help!
What lights are flashing on the printer?
In the meantime, please see this guide, Blinking Lights on the HP Deskjet 1510 and Deskjet Ink Advantage 1510 Printer Series.
Hope this guide helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Canon printer wont print PDF and Word files... sometimes.

I face a very special problem with my iMac and my Canon printer (Pixma MG5350): Since a few weeks, the printer wont print most PDF files correctly, the same with existing Word files. A blank or blurred sheet is coming out of the machine. But: When I create a brand new Word file and fill it with text, the printer prints it clean and neat. The same with the official Canon test prints – no troubles at all. I have also tried to sort out the problem with the help from Apple: http://support.apple.com/kb/TS3147?viewlocale=de_DE, without success. Glad about every help!

My next suggestion would be to try an alternate driver to the Canon.
There is the Gutenprint v5.2.9 suite which is free and lists the MG5300 series as a supported model. You could download and install this driver suite and add the Gutenprint MG5300 driver and see if this gives you the same problem.

HP ENVY 4500 Printer Windows 10 printer wont print

I have a HP ENVY 4500 all in one printer. I did the windows 10 inplace upgrade.Now th printer wont print. I dont think this is a driver issue.I get an error saying the printer is off line. My WIFI is connected and working great.When I look at internet connections in my area My printer shows up on that list,and ask for a security code. I think it asking for a password for the printer.I have never set one up. (FYI) I had been using this printer with Windows 8.1 andIt worked great before the windows 10 upgrade. Do I need to set up a password for this printerTo make it work. By the way This computer is a Dell Insperon about a year and a half old.I need to print Please Help.Thank youEarl

I managed to fix this issue by myself.
After hours of trying everything HP suggested on other forums with no avail I simply turned everything off (including the PC and Printer) and left it for half an hour.
Then I turned the printer on but turned the wireless off. I then tried to print the same document from the PC (which came up with an error saying my printer needed a connection to complete) turned the wireless back on via the printer and it works!
Quite disappointed I seem to be having so many problems with the ENVY after all its recommendations, hopefully the issue will not return.

I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set....

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

Is the HP on the airprint list?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

Printer wont print. have new ink. trouble help say it ok but its not ok

Similar Messages

Maybe you are looking for