Printer wont show up when plugged into timecapsule, and backups in pink wont restore?
i recently purchased a TC and my printer wont show up on the network when plugged into the usb port? i also cannot restore anything from backups in pink? any solutions
When you open Print & Fax to add the HP device, are you then clicking on it to highlight it, then clicking Add at the lower right to install the device?
When you do this, you will have the HP device installed in two "locations"....one at the Mac and the other at the TC. When you try to print, you have to be sure to choose the correct location.
The PCs will need to have Bonjour for Windows installed on each device. Run the program, and select the HP device. Bonjour Print Services for Windows v2.0.2
Keep in mind that only the print function will work on most All-in-One type devices when connected to the USB port on a router. You need to connect to a computer if you need advanced features like copy, scan, maintentenance, etc.
Similar Messages
-
my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help
I'm having the same problem. I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer. I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it. Before I buy one on ebay I hope someone can assist.
-
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates. -
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
As per the forum term of service you can't get help here. Use google.
that's the downfall of jailbreaking your phone. -
My External Hard drive wont show up when plugged in
I have an external 500GB LaCie hard drive connected to my 13inch mac book 09. It is used to house all of my itunes library (11,000 songs+), a bunch of pictures and a few movies and random other things. It was working fine until I came home from work one day and an error message was on my computer saying that I had ejected a disk without properly disconnecting it (meaning my hard drive). My HD was still plugged into my computer and I never touched it. I tried everything from unplugging, rebooting, etc, and it still wont show up when I connect it to my computer. A day earlier I had my itunes playing for 8 hours while I was at work and I had been noticing over the past few days that my power supply was unusually loud but didn't think anything of it until this all happened! I would appreciate any advice as I would like to keep listening to all my music. Please help!
Ok in disk utility it says Format : MS-DOS (FAT32)
Sorry Im not sure what you mean by can it connect via firewire? Sorry I'm a bit useless with technology haha -
please help! my iphone randomly went unresponsive, when plugged into itunes it flashes apple logo and itunes doesnt recognise it and when plugged into the mains its in recovery mode, asks to be connected to itunes, but immediately turns off when unplugged from mains
You could try to do a hard reset, sometimes resetting the phone helps. Hold down the sleep/wake button on the top and the home button until you see the apple logo, this make take a minute or two but this might help.
-
hi, so when my iphone locks, i cant see the screen again unless i plug into charger real quick. Home button works, sleep button has been broken. what do i do? i made it so auto locks never happens.
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support. -
HT3728 Ethernet cable ran to iMac works, but doesn't when plugged into TimeCapsule
Need help!!! Time Capsule will not work. Continue to get the blinking amber light, even after a soft and hard reset. I tried to reset the modem and that did nothing to help the problem. I then plugged the ethernet cable into computer and it works fine (thus how I am online posting this).
Any help or suggestions please let me know.
ThanksI guess you are using cable modem..??
You cannot change over clients without turning off the modem for a length of time that allows the ISP equipment to reset the MAC address of the device that captures the IP.
It can sometimes take, 15min off or even overnight for the modem to reset.
When it turns back on.. you must have only the TC connected to it.. the first device turned on will capture the IP.
So make sure the TC is plugged into modem.. it must be from WAN port.. (next to USB).
Power up the modem after the off time.. then after 2min power up the TC.
If your modem is not cable tell us.
If this doesn't work tell us precisely the modem make and model, and your ISP. -
my iphone 4 stopped working.the screen went hazy a few times then white.tried a reset but now screens black and phone makes the charging noise every ten seconds when plugged in. any fixes. oh battery has 3.7volts constant
i solved this myself.a new digitizer and screen fitted .phone now ok..charging noise was to alert you that the digitizer had a fault
-
Iphone 4s data will not work + does not show up when plugged into macbook.
I need to try to reset my iphone because it is not allowing me to use data on the phone even though my carrier had verified all the settings are correct and that I have unlimited data on my plan. Every time I try to access the internet on the phone without wifi connected I get an error message saying "could not activate cellular data network" or "you are not subscribed to a cellular data network."
However, when I plug my iphone 4s into my macbook pro it is recognized and shown in itunes, however I cannot download photos (iphoto shows an error message saying "no camera found") and the phone does not show up on my desktop or finder. I find alot of people have a problem with the iphone not showing up AT ALL, but mine works in itunes, just nowhere else on my computer.
I have tried to use icloud to back it up, but when I log onto icloud with my macbook to see what data is there and try to access my photos, only my contacts and a few other apps I dont need show up. No photos at all.If there's an Apple store nearby make an appointment with the genius bar to have it checked. Be sure to sync it and back it up, as well as import your photos and videos to your computer and back up your contacts separately (such as by sync them with iCloud) in case it needs to be replaced.
-
for some reason I can't see "devices" when I plug them into my home computer (running snow leapard). I recently upgraded my laptop to lion and now the devices are looking for my mac book. How do I get the devices to sync with home computer and not the mac book?
Try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
tt2 -
Zen V not recognised when plugged into laptop and it won't turn
Hi,
I just recently discovered this issue after not using my Zen V for a good month or so. Basically when I plugged it into my USB port it isn't recognised - all the software is installed yet it comes up saying new hardware was found with the name "STMP3600" and asks to to insert a disc and install the software. I remember seeing the software CD recently, but I'm experiencing that horrid feeling when you can see it at the front of your mind but you can't seem to quite grasp where it is :smileyvery-happy: I looked on this site but the only downloads are the Recovery programme (says I've not got anything plugged in) and the firmware (can't update if PC says nothing is connected).
I also can't turn it on; normally when its flat it turns on to the 'Creative' screen then flashes up with a battery warning sign and the words 'Low Battery' but this time its not the case. I tried slotting in a thin piece of metal and reseting & turning it on at the same as it recommends to get the internal recovery mode but no joy.
I can't send an email as I can't find the documents with the purchase date (it was from Amazon) and the serial code; I know it was some time in mid 2007 as I purchased it in my final year of University. Can you guess where that paper-work would be?
If anyone can give me some ideas of what to do, I would be very grateful! (And I will continue looking for my CD).
Message Edited by Anyerfillag on 0-09-2008 03:2 PMReset the SMC: http://support.apple.com/kb/HT3964
-
HT4367 Apple TV 2nd gen factory restore (blinking lights when plugged into TV)
I have a 2nd gen apple TV, and when doing the above steps my unit does not show up in iTunes...
I get rapid blinking lights when plugged into tv, and when plugged into itunes as per the steps here, itunes showing nothing.After trying to update the Apple TV 2nd generation it had the plug into iTunes message. When I plug into iTunes 11 and hit restore a message comes up "The device cannot be found" rendering the device useless. Please help!
-
My iphone wont show up in itunes when plugged into my laptop, help anyone?
when i plug my pihone into my laptop ( windows running on windows 8) it wont show up or connect into itunes, i can do the exaxt same thing with my ipod and it will connect and sync with my itunes library so i am confused to what the problem is. can anyonw help?
Hello Katie_5SOS
Check out the article below to go through some troubleshooting steps to get your iPhone to show back up in iTunes. It could be related to the Apple Mobile Device driver or could be a third party software conflict.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall.
There is no water damage or anything. I got that checked at the Apple store. I also have Apple Care + but didnt let them give me a new one yet because I have photos on this that I have no yet backed up that are very important. They are the last photos I have with my grandfather. Can anyone help me. Please!If the phone shows the "connect to iTunes" screen, the data on the phone is most likely lost.
Connecting in recovery mode is your only chance to use the phone again, besides getting it serviced by Apple.
iOS: Unable to update or restore
Maybe you are looking for
-
CS4-How do I remove a split screen in the Program monitor window?
I have Pro CS4 on a vista 64 OS. I am using the Mainstream encoders and my Program monitor window switches to a split screen every time I play the timeline. When I stop the playback, the screen returns to normal full screen with the last frame showin
-
Hi. Is there a USB flashdrive (or Firewire, Thunderbolt flashdrive or external drive) or SD card that the Windows 7 or Windows 8 64-bit so you could boot into windows without having to partition your Mac's drive? Thank you in advance. Have a great up
-
Help I have just purchased a i mac desktop computer , and i am trying to get it connected by my wi fi router to my panasonic smart tv, to watch pictures or music on the large screen tv , but the tv cannot find the mac on the network system . This was
-
Trying to convert as1 code to as3
Hi, I have to convert a as1 site to as3. The only part of the whole thing that i'm not sure of is this: on(release){ loadvariables ("save.aspx?cmd=addemail&adresse=" add string(adresse.text),this)
-
Why that my credited points were decresing
Hi Team, why my credited points are reducing after the rewarded by the solution seeker. it is happening to me for the 3 to 4 questions. i have suggested the solutions or the method to the following thread.. [setting up OM number ranges; [Rounding Ru