Printerdriver for HP Laserjet 1500L

Hi, I'm looking for a Printerdriver for Snow Lepard.
The printer is an HP Laserjet 1500L.
I tried the available driver for Lepard but this doesn't work.
Any Suggestions?
Thanks in advance.
Mathy Paesen

Hi,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
The HP Toolbox FX ( as part of a Full Feature Software) is not compatible with Windows 7 but only a UPD solution, full functionality is only available uisng compatibility mode with the Windows Vista software but for a 32-bit OS only, not for a 64-bit OS:
http://h20566.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02096212
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

How to find the toner level for HP LaserJet 1500L Drum and Toner set

You may have lost the original 1500L CD that came with the printer, or bought it second hand.
So how do you find out how much toner or drum fixer remains!
Actually this is a dumb question. The legacy 1500 and 1500L use dumb toner and drum cartages. They have a chip which simply counts the number of pages printed, and when a preset number (as per cartridge size) have been printed, it sends a signal to the printer to replace it. This is ok if you print the average amount of ink per page, but if you print a lot of photos, the cartage will be exhausted before the indicator flashes, and if like the rest of us you print the usual selection of documents etc, then probably about 50 to 25 percent of the toner remains - what a waste!.
Ok - but its kind of nice to know how many pages have been printed.
Do exactly the following:
1) Press the (green) GO and (orange) CANCEL button simultaneously.
This will then print a status and configuration page. The top left hand column will give the number of pages printed. However if you reset the NVRAM to allow you to use up the supplies, then this will be the count of pages printed since this was reset!.

Hello tmsmatt,
Please try the below step...
On the product control panel, press and hold the Resume button ( ) for 2 to 3 seconds.
The printer would print a configuration page and you'd find the info you required in it.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Color LaserJet 1500L add windows 8.1

I can't find the driver for my printer (HP Color LaserJet 1500L) for windows 8.1.

Hi,
I afraid a such is not available, the printer is not compatible with Windows 8.1:
http://h71016.www7.hp.com/dstore/MiddleFrame.asp?page=config&ProductLineId=565&FamilyId=3294&BaseID=...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Color LaserJet 1500L - drops off the 802.11n network

My HP Color LaserJet 1500L drops off the network (it just stops printing). This happens when it is plugged into the usb bus of my new 802.11n base station or directly into the usb bus of a computer. The only way to fix it seems to be to plug it directly into a computer and unplug the usb plug and replug it, or to add the printer again. This problem has occurred in the past, but over time, and after various upgrades to the operating systems and hardware, etc, the situation tends to change. Before I installed the 802.11n base station the printer was staying in contact with my computers, but now it is misbehaving again. I doubt there is a real solution out there now, because it happened before and I never did discover a direct fix, but I thought the problem to be worth posting. This problem does not happen with my Canon PhotoPrinter iP6000S, which sticks to my network like glue whereever I plug it in (airport express, airport extreme, direct to computer, etc.) The HP loses contact with either of my computers in exactly the same way.
Mac Pro Intel Core 2 Duo, and iMac Intel Core Duo Mac OS X (10.4.8) airport express, airport extreme 802.11n, cable modem
iMac Intel Core Duo Mac OS X (10.4.8)

To use the OS X standard network protocols (Windows/IP printing), you must have either a postscript printer (the driver in that case is just a ppd for the OS X postscript output) OR, a driver designed to work with CUPS (CUPS driver). HP doesn't provide CUPS drivers for OS X (who knows why, since they do for linux).
You need to install foomatic and ESP ghostscript:
http://www.linuxprinting.org/macosx/foomatic/
then, install the foo2oak driver:
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-Color_LaserJet1500

Printing to Windows HP Color Laserjet 1500L

I have just set up my macbook to print to my Lexmark E232 over my widows network. It works great.
So I followed a similar approach for my HP Color Lasejet 1500L. However when I get to the final step where you choose the actual printer Model (after slecting HP) I find the HP Color Laserjet 1500L isnt listed. I have tried some of the other ones but nothing prints.All the steps windows printing-network neiborhood-etc are fine.
Note I have insalled the driver etc for the HP Color Laserjet 1500L to work via USB and this works no probs.
I tried other in the drop down menu but couldnt find out where the driver for the Hp 1500 was located.
Any help would be appreciated.
Thanks

To use the OS X standard network protocols (Windows/IP printing), you must have either a postscript printer (the driver in that case is just a ppd for the OS X postscript output) OR, a driver designed to work with CUPS (CUPS driver). HP doesn't provide CUPS drivers for OS X (who knows why, since they do for linux).
You need to install foomatic and ESP ghostscript:
http://www.linuxprinting.org/macosx/foomatic/
then, install the foo2oak driver:
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-Color_LaserJet1500

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Win XP 64 driver for hp laserjet pro 200 color mfp m276nw

Hi, any workaround for using this printer under XP-64?
Maybe driver rename or compatible generic?
Just bought it, unpacked, connected - and found out that XP 64 is not supported.
Now what? Return in disgust and buy Cannon or Minolta again, as they support all OS?

Hello sangamon,
Welcome to the HP Forums!
I understand you're looking for a Laserjet 200 color MFP m276nw driver for Windows XP 64 bit. I will do my best to assist you! Have you tried downloading the full feature from the HP website here? This will support your operating system. Please let me know if you have any further questions.
Have a great night!
I worked on behalf of HP.

Windows 7 driver for hp laserjet 1100

windows 7 driver for hp laserjet 1100

Hello Stoiko,
Thanks for the post. Depending on which model of HP LJ 1100 that you have, the drivers for Win7/64 can be located here: Good Luck!
HP LJ 1100
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=14925
HP LJ 1100 All-in-One
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=12006&spf_p.t...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Drivers for HP laserjet 1020 printer for Macbook Pro OS 10.10.1?

Like to install drivers in OS 10.10.1 for HP laserjet 1020 printer. When checking on App Store updates I cannot find anything. Where do I find the driver? Thank you

Hi @LGolf ,
I see by your post that you are looking for drivers for the Laserjet 1020, for 10.10.1. I would like to help you.
Unfortunately the Laserjet 1020 is not supported on a Mac operating system.
Printer Specifications for HP LaserJet 1020 Printer Series.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

DRIVERS FOR HP LASERJET 1005 SERIES FOR WINDOWS 8.1 64 BIT

Hello!
When I can get drivers for hp laserjet 1005 series for windows 8.1 64 BIT?
My printer work perfect and i would not chance it!
Is anny solution there?
Thank you for your answer.

Hi, the 1005 Laserjet is not supported in Windows 8/8.1, see this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Drivers for HP Laserjet P1007 Printer

I have not been able to get the Drivers for Hp Laserjet P1007 Printer loading into my iMac Desktop.
HP sites dpo not open up for my required queries
thanks
s.s.kulkarni

Hi.
Follow these steps to install the printer:
http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435678/model/3435679/document/...
Basiclly you would need to turn the printer on and connect it to your Mac.
From the Apple Menu click on Software Update and install the HP Printer Drivers v3.0.
Next the printer should appear under Print & Scan, if it isn't click the plus sign and add it.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Drivers for HP Laserjet 4000t in Windows 7

I need Drivers for HP Laserjet 4000t in Windows 7. Do they exist? Where do I get them? I hate to lose my reliable old printer

Hi:
Try the W7 32 bit drivers and software from the HP Probook 450 G2.
Your model uses the Intel HD graphics driver.
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4053

Scan driver for HP LaserJet 1536dnf MFP

Hi! Could anybody provide a driver for HP LaserJet 1536dnf MFP for scanning that it really work?

Hi! Unfortunately Your advice does not work. I have downloaded the full feature software Your dirrected, however I can not install it. I run the full feature software hp_M1530_MFP_full_Solution_usb_n_w.exe (find enclosed picture 1.jpg, please). It reaches 99 % of installation (2.jpg) after 14 minutes. Further after 3 min. I get an error message (3.jpg) “An install operation took too long to execute. This a fatal error preventing product use. Please restart your computer, and run this installer again”. After restart of computer, I get a message “Installing device driver software” (4.jpg) and “Your device is ready to use” (5.jpg). Despite that, the scanner does not work, and there are some dysfunction’s with the printing. We have two such printers, and both encountering with this problem. Could you help, please?

Drivers For HP Laserjet 4 Plus

I'm looking for the driver for a Laserjet 4 plus is there a driver. I wanted to share the Laserjet with my windows 7, but mac have removed the printer setup utility off Yosemite 10,10,4 so i'm now trying to use the Laserjet with the Mac

The laserjet 4 plus is not compatible with the MAC unless you have the postscript option installed. That said there are some aftermarket programs that will allow you to use a non postscript printer on a MAC. Best to do a search or post this question on the MAC support site.

HP Toolbox FX Software and Driver for HP LaserJet 3052

Dear Sir,
I have lost my software driver for HP LaserJet 3052, currently I am using the printer (HP LaserJet 3052) with driver downloded from HP website. However, many features have dissappered. I can no longer able to print both side.
Where can I download the HP LaserJet 3052 driver software with fully features?
Where can I have HP LaserJet 3052 Toolbox software?
Thank you verry much.

Hi,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
The HP Toolbox FX ( as part of a Full Feature Software) is not compatible with Windows 7 but only a UPD solution, full functionality is only available uisng compatibility mode with the Windows Vista software but for a 32-bit OS only, not for a 64-bit OS:
http://h20566.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02096212
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printerdriver for HP Laserjet 1500L

Similar Messages

Maybe you are looking for