Printers and Disk Utility Repair

Since installing Leopard my Lexmark X5470 Printer does not print or is recognized by the system. And... Disk Repair takes an extremely long time to complete. Are these 2 issues issues of mine normal?
Thank you.
Ron

Hello Ronald,
1. Printer. Try here....
Blue Apple > System Preferences > Printing. ( You may need to locate the latest print driver from the web )
2. Disk repair. Yep. Known problem. Suffered by most / all Leopard users. A fix will, I am sure, be released soon.
Regards
Ian

Similar Messages

Alias Files and Disk Utility Repairs

Hey there,
I recently moved a whole lot of movie files from iTunes on to my harddrive, they are no longer on the computer, however the space that they were previously taking up has not been reduced. I found that there were " alias " files that only appeared under All My Files. These alias files for the movies I removed cannot be opened, as the original file is not there, and cannot be moved or deleted. I ran Disk Utility verification to try and fix the problem and came back with some issues:
Volume bitmap needs minor repair for orphaned blocks.
Invalid free block count.
The volume Macintosh HD was found corrupt and needs to be repaired.
I followed the prompts, restarting my computer and holding down command and R and opening Disk Utility and running disk verification and repair, coming abck with no problems and this restarting the computer again. However once I had done so, I found the alias files still to be stuck, and running the disk verification and repair AGAIN it's still corrupt and repair just comes back with
The disk "Macintosh HD" could not be unmounted.
Any suggestions?
Thanks, Connie
I press Delete Alias and it just reappears.
I followed the repair prompts and these issues still appear.

Some are movie files, some are documents, some are backups of documents, some are music files.
The only options that appear when right click are :
> Open
> Open enclosing folder
[does nothing]
> Get Info
> Quick Look

Disk Utility: "Repairing disk failed with error Could not unmount disk"

Disk Utility: “Repairing disk failed with error Could not unmount disk”
Hi. I’ve been experiencing some mildly squirrelly behaviour with my system (vide infra) so decided to repair the two internal hard drives on my computer. The primary hard drive is a 74.53 GB ST380013AS that came with the system; its S.M.A.R.T. Status is “verified” and Disk Utility repairs permissions just fine. However, the second internal drive (Maxtor 6L250S0, 233.76 GB, lower Bay, Journaled HFS+), despite being verified by S.M.A.R.T. status and apparently running OK, fails to unmount when I ask Disk Utility to repair it- I get the above error message in red. I have repaired this disk with DiskWarrior (v3.03) and all appears to run AOK. Can anyone tell me why I cannot get Disk Utility to run on this secondary (eg, non-startup) disk? I have tried many times and the error is reproducible. Thank you!
G5 1.6GHz PPC, 1 GB RAM, running OS 10.4.6

Thank you for these useful links!
For others who have this issue, I also found very helpful advice given to this question on the MacFixIt forums by MicroMat Tech3 at
http://www.macfixitforums.com/php/showthreaded.php?Cat=&Board=tiger&Number=76265 1
He said: "Use the lsof command to find the open files on a volume that does not unmount or eject. Open Terminal, located in /Applications/Utilities. Type: sudo lsof | grep Leave a space after the p in grep, then drag the icon of the problem volume to the Terminal window. The pathname for the volume is pasted in for you; press Return. Then enter your administrative password at the prompt, and press Return."
At this point, one now has a list of the open files/processes on the volume that will not unmount. You can use Activity Monitor to terminate these processes if you wish, and then the volume will unmount as it should.

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

Repair Permissions differences between Onyx and Disk Utility

If I repair permissions, there are a large number of 'repaired permissions' if I switch between using Onyx (10.6) and Disk Utility. Most of them are in
System / Library / CoreServices
System / Library / Java
System / Library / Frameworks
Why should this be? It makes me think that either Onyx or Disk Utility is doing it wrong. If I had to back which one it is, I'd have to say Onyx is the likeliest suspect. In other words should I avoid using Onyx to repair permissions and just use DU in future?

should I avoid using Onyx to repair permissions and just use DU in future?
Probably, but some permission results are always and repetitively wrong:
As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.

Ibook G4 - won't start up, spins, and shuts down... disk utility repair...

ibook G4 - won't start up, spins, and shuts down... disk utility repair quits. says "invalid sibling link" "volume check failed" "1 volume could not be repaired because of an error" "the underlying task reported failure on exit"
any ideas about how to start and/or recover data ??
thanks

Hi chesterday, and a warm welcome to the forums!
You must repair the HD, your best bet is DiskWarrior from Alsoft...
http://www.alsoft.com/DiskWarrior/
You'll need the CD though.
Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD.

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

Software Update and Disk Utility no longer work (Leopard)

Hello. After upgrading yesterday from 10.4.11 to 10.5.0 then updating to 10.5.1 I find that repair / verify permissions no longer works (it just hangs after starting).
And the same with Software Update, it starts the check then just hangs. Grateful for any ideas!
Overall I am finding Leopard much slower in operation than Tiger. Peter

Create a new admin account with Apple menu -> System Preferences -> Accounts and see if the issue duplicates itself logging into that account. That will say if the issue systemwide, or just localized to the a bad user cache file. If the issue persists in the new user, you can try looking in the System -> Library and Library -> Cache, Applications Support, and ByHost folders for cache files relating to Software Update and Disk Utility. Once you find them, carefully extract them to comparable folders on your desktop you create (i.e. name one systemlibrarycache) so you know where you go them from, and restart your Mac. If the issues go away after two restarts then it is just one set of bad cache files. If the issues return after two restarts, you have something generating bad cache files which needs a more system wide repair tool.

Problems running Software Update and Disk Utility

I had automatic updating turned on in the Software Updates control panel, so I believe the system tried to apply the 10.4.6 automatically and somehow failed.
Ever since, when I try to run Software Update it hangs while trying to connect to the internet to get the list of available updates. I tried downloading the installer directly from Apple, but when I try to select a volume on which to install the update, it doesn't list my hard drive.
Finally, when trying to run the Disk Utility, I get an error about how the Disk Utility cannot be started because a background process is not running. I have to Force Quit to exit out of the Utility.
I was able to boot off the Mac OS X 10.4 installation DVD at which point I repaired the permissions and repaired the disk. However, upon restart the same problems remain.
I've seen several other people post about this issue; has anyone found a resolution OTHER than doing an Archive and Install (which I don't want to do if I don't have to?)
Thanks so much for help that anyone can provide!
iBook G4 Mac OS X (10.4.5)

Create a new admin account with Apple menu -> System Preferences -> Accounts and see if the issue duplicates itself logging into that account. That will say if the issue systemwide, or just localized to the a bad user cache file. If the issue persists in the new user, you can try looking in the System -> Library and Library -> Cache, Applications Support, and ByHost folders for cache files relating to Software Update and Disk Utility. Once you find them, carefully extract them to comparable folders on your desktop you create (i.e. name one systemlibrarycache) so you know where you go them from, and restart your Mac. If the issues go away after two restarts then it is just one set of bad cache files. If the issues return after two restarts, you have something generating bad cache files which needs a more system wide repair tool.

Disk Utility/Repair Help Please...

Hi
I have been having some issues with a Kernel Panic on my MBP. I am trying to solve them with the help of the X-Lab, but when I do the disk utility>repair permissions I get the following messages:
Repairing permissions for “Macintosh HD”
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Permissions repair complete
Does anyone think this may be a contributory factor. If it is unlikely that these are not to do with the Kernel Panic, any ideas as to what they are and what I should do.
many thanks in advance
Rob

Those messages are normal and may be ignored.
This article is for Leopard, but still holds true for Snow Leopard:
http://support.apple.com/kb/TS1448

Safari, Mail and Disk Utility won't run unless Font Book is Open

Recently Safari, Mail and Disk Utility would crash and spin and the "Application Not Responding" line would appear when I checked the program in the dock. After following a variety of tips from other Apple users, I finally got the programs to run. However, I started them while Font Book was open and now they only work when it remains open. I've been using Apple/Mac products since the beginning of time and have never seen anything like this. I've repaired permissions, throught out preferences, etc., etc. and can't resolve this problem. Please, someone, help me.

Hello buhrow:
That makes two of us that go back to the beginning of time and have never seen anything like that. Have you run the fontbook applications to eliminate duplicates and check for corrupt fonts? Offhand, I cannot understand why just having a program open would prevent other programs from crashing.
If nothing else works, you might want to consider an archive and install (after backing up, of course):
http://docs.info.apple.com/article.html?artnum=107120
Barry
Message was edited by: Barry Hemphill (spelling, no checker)

Disk Utility repairs permissions; 1 hour later they're un-repaired again.

(March 2009 24" iMac. Lion 10.7.3)
I repair permissions on Macitosh HD (boot volume) every-other week. I've noticed that the same permissions seem to need repair each time. Here are the last seven lines from the Disk Utility window from the May 19 run:
One hour later, I repeated the operation. Here are the last seven lines:
I might be overly sensitive, but I detect certain similarities between these results. In fact, it looks like Disk Utility repairs exactly the same permissions every time and those permissions are corrupted shortly after they are repaired.
What's going on here? Should I be alarmed? Or should I panic?

I'd like to delete this post (if I knew how). There are several other threads on this topic, and other contributors report exactly what I observe. It turns out it's a harmless artifact of upgrading from 10.5 to 10.6 to 10.7, rather than doing a clean install of Lion. This article is reassuring: http://support.apple.com/kb/TS1448
I shoulda searched more thoroughly before posting.

Can Disk Utility repair FAT32?

hi, folks:
I'm jammed up. I need to repair the drive in my PS3. It's FAT32-formatted. Im a Mac user, obviously. Can Disk Utility repair it, or does it only do Mac discs?
Please say "yes" (and mean it!). (Barring, of course, hardware problems, I mean. I understand that if the platter is scratched or the controller's no good, I've had the radish.)
BInky

Grf. This wasn't the answer I wanted, but it's what I needed. Thanks, Kurt. I'm now off on a quest to find a Windows laptop. I appreciate the quick response.
BInky

Disk utility repair permissions stops altogether

I tried running Disk Utility Repair permissions and received a grey message box saying it stopped repairing permissions because of the following error:
Error: The underlying task reported failure on exit.
This same error message was repeated in the usual information box that disk utility uses to provide detail about what it is doing.
I believe the problem occurred because I selected Macintosh HD and added another user (myself) to read/write in the disk permission section of the information window, and I also applied that to all enclosed items. I did this in the first place because of repeated attempts and failuire to install the latest version of skype into my applications folder (being told that I didn't have enough permissions to complete the overwrite task). When I tried verifying the disk I received the error message "ERROR: could not freeze volume permissions denied"
I switched users to a specific administrator account that I reserve for troubleshooting, but got the same result when I tried running disk utility.
As a not unrelated issue when I attach my ipod touch, itunes says that it cannot recognize this ipod, then after about the third time simply doesn't acknowledge my itouch exists.
everything was working well until i did this large change permissions operation.
So does anyone have any idea what I have done (wrong) and how I can fix it?
thanks
John

John Fountain wrote:
I believe the problem occurred because I selected Macintosh HD and added another user (myself) to read/write in the disk permission section of the information window, and I also applied that to all enclosed items.
Uh-oh. You completely trashed your whole system by doing that. Boot up from your Leopard DVD and restore that last Time Machine backup that was made before you made that mistake. If you don't have any backups you will have to reinstall Leopard.
I did this in the first place because of repeated attempts and failuire to install the latest version of skype into my applications folder (being told that I didn't have enough permissions to complete the overwrite task).
When that happens, just trash the old application first, then drag in the new one.
When I tried verifying the disk I received the error message "ERROR: could not freeze volume permissions denied"
I switched users to a specific administrator account that I reserve for troubleshooting, but got the same result when I tried running disk utility.
Changing permissions on the HD and applying to enclosed items hosed your whole system. That's what's causing all your problems. It's doubtful that you will be able to repair it. Restore your system from backup, or reinstall.

My MacBook Pro started running very slow. I did disk utility/repair

My MacBook Pro started running very slow. I did disk utility/repair and it helped but still very slow. Repair gave me this message, "SUID file 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent has been modified and will not be repaired." Any suggestions on this message and/or what else I can do to get my computer back to the way it used to run? Thank you!

It says 199.15 GB free of 499.25 GB. Can I remove the Remote Management program to solve the other unrepairable problem?

Printers and Disk Utility Repair

Similar Messages

Maybe you are looking for