Printers Go To Sleep and will not wake up by a print job on the wireless or wired network

I have an OfficeJet 4620, and a PhotoSmart3210. The 4620 is wireless, the 3210 is plugged into the router and both are shared on the network. We are running Win 7 Home Premium 64 bit SP1, the Router is a Linksys EA6500. The problem only occurs AFTER the printers go to sleep, their "Energy Saving Mode". I use That term with tongue in cheek as the energy required to get them back up and running, as well as lost productivity "fixing" a printer is a royal pain. Once they go to sleep I have to, at least, go to them and hit the "OK" button to wake them up. About 50% of the time this works, another 25% I have to re-boot the printer, and the final 25% I have to re-share it on the network. My question is: How do I turn off this "feature" (powersaving mode) on both? Nothing in either manual suggests that a way even exists. You can change the time (up to 1/2 hr awake) but that is it.
Any suggestions, up to and including buying an Epson will be gratefully accepted.

Hello SeaDragon47.
The easiest solution to the "not waking from sleep" issue is to simply plug the printers directly into the wall outlet. Something about the manner in which surge protectors/power strips handle electricity doesn't sit quite right when electronics want to wake up.
Another possibility is to upgrade the firmware on the printers. Here is the latest firmware for the Officejet 4620. The Photosmart does not appear to have upgradable firmware.
Yet another suggestion is to set static IP addresses for the printer(s). I am not sure why but having a static IP set seems to keep the printer from going into sleep mode in the first place.
Let me know if this helps. Have a lovely day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Similar Messages

My iMac (10.6.8) goes to sleep and will not wake up without a hard reboot.

My iMac (10.6.8) goes to sleep after 2 or 3 hours (even if im working at the time) and will not wake up without a hard reboot.
Any suggestions would be very much appreciated.

What all USB or Firewire devices do you have connected?
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if sleep/wake works OK in Safe Mode.
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
next...
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Monitor goes into sleep mode and will not wake up

My monitor goes to sleep and will not wake up. I try powering off and that will not respond. I have to unplug the workstation and start back up. I have turn off sleep to never sleep and now it just goes to sleep when Im working.

Hello @rosendahl14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter
reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Since I upgraded to Maverick when computer sleeps it will not wake up but must be restarted? Also password to icloud is never saved?

Since I upgraded to Maverick when computer sleeps it will not wake up but must be restarted? Also password to icloud is never saved?

I read someone said you can tap on "other" when selecting which wifi you connect to and then entering the exact wifi name of the network you wish to join and the password and then joining that network allowed the password to be saved. Also with iOS 6 the minimum length of the password needs to be 8 characters. Maybe you password on your router is less than 8 characters long

Mac gets hot then screen go to sleep and will not restart until cools down

Ever since I downloaded Lion on my mac I have noticed when I leave my mac while not using it it gets really warm.Next it goes into sleep mode and will not wake up with a tap of any button so I have to wait for it to cool down to restart.I have read other peoples problems with Lion could this be another glitch with the new operating system download?

I have been getting the black screen after waking. My screen is not set to sleep, so I don't know if it's related. Some discussion of the problem here:
http://discussions.apple.com/thread.jspa?threadID=1227085
http://discussions.apple.com/thread.jspa?threadID=1243743

My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
Try resetting it:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

After update to O/S 7.1.2 my iPad2 is stuck on Vertical Orientation and will not shift to horizontal as it has in the past. How can I get the flexible orientation back??

After update to O/S 7.1.2 my iPad2 is stuck on Vertical Orientation and will not shift to horizontal as it has in the past. How can I get the flexible orientation back??

I agree with what FoxFifth has said, but I want to add a little to the discussion and put my own twist on the explanation.
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen.
If you are running iOS 7, swipe up from the bottom of the screen to get to the control center and the lock icon is in the row of icons at the top all the way to the right.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

My IPhone 5S turned itself off and will not turn back on even when I hold the home button and the on button. What do I need to do?

My IPhone 5s turned itself off and will not turn back on even when I hold the home button and the sleep button. What do I need to do?

Me, I would call apple Help..it's a new iPhone..

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

TS3899 My ipad does not communicate with iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting should be changed?

My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?

It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved.

Going on holidays and will not have wifi how to I get all the music I want off the cloud and on to my iphone?

Going on holidays and will not have wifi how to I get all the music I want off the cloud and on to my iphone?

Without going through my 21,000 songs and manually selecting.

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

HT1222 I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing

I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing

Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.

The WiFi button is gray and will not turn on WiFi. When I push the Bluetooth on button, all I get is the spinning gear. It does not go on. What is the problem? Is there a fix?

The WiFi button is gray and will not turn on WiFi. When I push the Bluetooth on button, all I get is the spinning gear. It does not go on. What is the problem? Is there a fix?

After trying resets and a full restore, I went to Apple Store. Genius kept me waiting 1/2 hour beyond app'tment time, then had to go through all sorts of tests before concluding the problem was what you said. They replaced the phone. Thanks.

Printers Go To Sleep and will not wake up by a print job on the wireless or wired network

Similar Messages

Maybe you are looking for