Printers working, but getting group policy error (error 513)
Ok great, I'll let you know how it goes.
Hi all,I've got a print server role running on a Server 2012 VM. It was working great until a few days ago until one of the printers went offline. I restarted the print spooler (no effect), then restarted the server (brought the printer back online). Since then, I've been receiving these errors for all three printers we have on this server:Error ID: 513Source: Microsoft-Windows-PrintServiceMessage: Group Policy was unable to add per computer connection \\___\\Copier Konica Minolta C360 PCL. Error code 0x7B. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.The printer names did not change, and since the printers are working, it seems that the spooler is working. I also tried updating the drivers through print management (there is a new version of the driver...
This topic first appeared in the Spiceworks Community
Similar Messages
-
Hello
When i want to get Group policy Results for one Computer in Domain came out this error: (Environment win2k8 and win7)Hi Amir,
>>When i want to get Group policy Results for one Computer in Domain came out this error
Before going further, we can try to run command gpresult/h gpreport.html
with admin privileges on the computer to see if we can successfully collect group policy result.
Best regards,
Frank Shen -
Trying to install Photoshop CC but get following message, download error. press retry to try again or contact customer support.(49)
disable running antivirus/firewall programs.
-
Upgrading my iPad2 to iOS6 seems to have worked but now have a 3014 error message, have tried following the support advice but seem to be going round in circles and can't see what is wrong.
iPod linked to my MacBook which is upto date and running Mountain Lion
Noted that my wi-fi here is very slow, could that be an issue?From 3rd link below.
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
1. Install the latest version of iTunes.
2. Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
3. Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
4. Try to restore from another known-good computer and network.
5. If the errors persist on another computer, the device may need service.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Motherboard went in my g5 desktop so i go my hard drive extracted with all my data..I now have an ibook g4 laptop running off OSX 10.4.11 and am trying to get Garageband working but get this message: The Instrument Library is invalid. GarageBand expects a valid Instrument Library folder?
Contact Apple Support:
http://www.apple.com/support/contact/
Apple - How to Contact Us:
http://www.apple.com/contact/
Be sure to refer to the repair ticket number.
Sounds like a terrible mixup.
Good luck & happy computing! -
Event ID 1058 Group Policy Preprocessing Error Code 3
You will see this in the event logs, the processing of group policy failed. It is trying to process a policy that doesn't exist. After reading http://technet.microsoft.c the
first resolution Error code 3 (The system cannot find the path specified) lead me to this --> http://support.microsoft.c
4. In the right details pane, double-click DisableDFS.
This entry doesn't exist but if I add it, it works. Problem is solved on machine 1.
Machine 2. This is a brand new Windows 7 setup to investigate this problem because it appears on a lot of the workstations and I have no idea why. Applying this fix did NOT solve the problem. I am a bit stuck. I have new GPs to roll out but they
won't apply with this error in place.
I can ping the logon server just fine and I can get to \\FQDN\sysvol as well. gpupdate /force shows the same error in the event log.Hi,
Have you tried all steps in the link:
http://support.microsoft.com/kb/314494?
Verify you can read gpt.ini using the full network path, full network path to the gpt.ini as \\<dcName>\SYSVOL\<domain>\Policies\<guid>\gpt.ini where <dcName> is the name of the domain controller,
<domain> is the name of the domain, and <guid> is the GUID of the policy folder.
Please post the full event message for further analysis. In addition, we need to know that what policy did you set that could not be applied.
Regards,
Yan Li
Regards, Yan Li -
We are running Windows 8.1 Pro x86
I am really curious as to why the drive restriction group policy causes the error message to pop up:
"This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator."
It does not prevent from actual saving so functionality is not lost but it really annoys our end users and we're getting a lot of complaints. We cannot use the workaround of hiding drives instead of restricting as this still presents security issues. This
is happens when saving (or clicking on a button like "Browse" that opens the 'Open' dialogue box) in all Office 2013 applications, Internet Explorer, Paint, Notepad, and probably most others. I've looked at many forums and no suggestions for workarounds
have succeeded for us to get rid of this error message and in fact, I read a post that stated that someone contacted Microsoft and they said this was by design and there is no workaround. I find this very unfortunate that we either have the choice of compromising
security or annoying our end users. It seems to me like the new dialogue box in Windows 8.1 (and maybe 8?) attempts to access the local drive under the logged in user's account before it actually opens up the dialogue box which conflicts with the group policy
that restricts access to the drive.
Has anyone at all had any luck getting this to go away without removing the restrictions? It seems like the answer is either buried in the Windows code or somewhere in the registry.
Thank you in advance for your time!Thank you for your time and response! Unfortunately, we have the machine locked down pretty tight (they are public use computers that require heavy restriction) and it is set to restrict all drives so access is limited to the local profile. We did try
testing your method, however, by adding the Desktop as an allowed location in the Office policy (which would not solve the issue for the other applications but was good for a test) using the path %userprofile%\desktop. When choosing that location, it does
not throw the error but unfortunately, it does not remember like it did for your with the E: drive so it still always throws the error when first loading the dialogue box no matter what I do. If you're able to confirm that this is simply by design and we're
just expected to inform our users to click through the errors, then I guess that's the accepted answer. Although, do you think that there might be a registry key value that is set after you save to the E: drive for the first time? Maybe we could set that value
to %userprofile%\desktop if it's doing the redirection after the first save through registry. Thanks again! -
We recently switched hardware and server software Win SBS 2008 to 2012R2 for a small network roughly 40 clients (Win7 Pro / Win 8.1 Pro) about 16 running concurrently at a given time and one network printer with the printer queue residing on the DC as well.
I read that a single server environment might not be ideal in particular no fail-over but that is an accepted risk in this particular network here.
Errors:
Error 1043: Timeout during name resolution request
Error 1129: Group policy updates could not be processed due to DC not available
Error 5719: Could not establish secure connection to DC, DC not available
Occasionally but disappears after a while
Error 134: As a result of a DNS resolution timeout could not reach time server
Symptoms
On Win 7 Clients
Network shares added through Group Policy will not show sometimes
Network shares disconnect (red X) and when accessed return access authorization error after one or two clicks on the share finally grant access again
When the issue with accessing network shares occurs, it usually also affects Internet access meaning a 'server not responding' error appears in the browser windows when trying to open just any web page
nslookup during the incident returns cannot resolve error
ipconfig on client shows correct default router (VDSL Router) and DHCP / DNS Domain Controller
Also, the Win system log shows the above errors during these incidents, however, the nuimber of incidents vary from 20-30
On Win 8.1 Clients
Same as above with the slight variation for network shares apparently due to Server 2012 and Win 8.1 clients managing drive shares differently. However, network share refresh does not work with this clients. In most cases only a gpupdate /force returns
drive shares but usually only for the active session. After logoff / logon the shares are gone again.
The issue does appear to be load related since it occurs even if there are only one or two workstations active.
Server Configuration
Dell R320 PowerEdge 16GB / 4TB 7200RPM RAID10 / GBitEthernet
Zyxel 1910-48 Port Switch
VDSL 50Mbps Down / 20Mbps Up
Since the DC is the only local DNS and there are no plans to add another one or move DNS to another server, the DNS server is configured with this own address as preferred DNS with three DNS forwarders 1) VDSL Router 2) ISP DNS1 3) ISP DNS2
Currently only one Network card is active for problem determination reasons.
There appears to be no consensus concerning IPV6 enabled or disabled, I tried both with no apparent effect
I have set all network cards server and client to Full Duplex and the same speed, also disabled Offload functions within the adapter settings. Some but no consistent improvements.
Best Practice Analyzer Results
DNS server scavening not enabled
Root hint server XYZ must respond to NS queries for the root zone
More than one forwarding server should be configured (although 3 are configured)
NIC1 should be configured to use both a preferred and alternate DNS (there is only one DNS in this network)
I have found some instructions to apply changes to the clients through a host file but I would rather like to understand whether this DNS response time issue can be resolved on the server for example timing setting perhaps. Currently the DNS forwarders are
set to 3 second.
Since a few people have reported issues with DNS but most are working with multi DNS, DC environment I could not really apply any suggestions made there. perhaps there is anyone like me who is running a single server who has overcome or experience the same
issues. Any help would be appreciatedHello Milos thx for your reply.. my comments below
1. What does it "switched"? You may mean migration or new installation. We do not know...
>> Switched is probably the incorrect term, replaced would be the appropriate wording. Before, there was a HP Proliant Server with SBS 2008 with distinct domain and now there is a Dell Server with MS 2012 R2 with a distinct domain. Client were
removed from one (SBS) domain and added to the new Server 2012 domain. Other components did not change for example same Network Switch or VDSL Router, Workstations and Printer
2. Two DCs are better alternative. Or backup very frequently. There are two groups of administrators. Those who have lost DC and those who will experience this disaster in near future.
>> Correct, and I am aware of that
3. NIC settings in W 7 and W 8.1, namely DNS points to DC (...and NOTHING else. No public IP or that of router DNS.))
>> Correct, this is how it's currently implemented. Clients point to DC for DHCP and DNS and Default Router, no public IP or DNS. The only references to ISP DNS exist on the VDSL Router itself as provided through ISP when establishing VDSL
Link and the list of Forwarders in the DNS Server configuration. However, I have just recently added the ISPs DNS as forwarders for test purposes and will probably learn tomorrow morning whether this had any effect for better or worse.
4. Do nslookup to RR on clients. RR branch is saying client basic info on LDAP parameters of AD.
>> Will post as soon as available
5. I do not use forwarders and the system works
>> Ok, does this mean it works for you in a similar or the same infrastructure setup or are you saying it is not required at all and I can remove any forwarder in a scenario like mine? If not required can you explain a bit more why it is not
required apart from that it does work for you that way?
6. DHCP should sit on DC (DHCP on router is disabled)
>> Correct, no other device is configured to provide DHCP service other than DC and DHCP is currently running on DC
7. NIC settings in DC points to itself (loopback address 127.0.0.1)
>> Are you sure this is still correct and does apply to Server 2012? I am reading articles stating that it should be the servers own IP but local loop or should this be added as alternate DNS in addition to the servers own IP?
8. Use IPCONFIG /FLUSHDNS whenever you change DNS settings.
>> OK, that was not done every time I changed some settings but I can do that next week. Reboot alone would not suffice, correct?
9. Test your system with dcdiag.
>> See result below
10. Share your findings.
Regards
Milos
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = GSERVER2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\GSERVER2
Starting test: Connectivity
......................... GSERVER2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\GSERVER2
Starting test: Advertising
......................... GSERVER2 passed test Advertising
Starting test: FrsEvent
......................... GSERVER2 passed test FrsEvent
Starting test: DFSREvent
......................... GSERVER2 passed test DFSREvent
Starting test: SysVolCheck
......................... GSERVER2 passed test SysVolCheck
Starting test: KccEvent
......................... GSERVER2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... GSERVER2 passed test
KnowsOfRoleHolders
Starting test: MachineAccount
......................... GSERVER2 passed test MachineAccount
Starting test: NCSecDesc
......................... GSERVER2 passed test NCSecDesc
Starting test: NetLogons
......................... GSERVER2 passed test NetLogons
Starting test: ObjectsReplicated
......................... GSERVER2 passed test
ObjectsReplicated
Starting test: Replications
......................... GSERVER2 passed test Replications
Starting test: RidManager
......................... GSERVER2 passed test RidManager
Starting test: Services
......................... GSERVER2 passed test Services
Starting test: SystemLog
......................... GSERVER2 passed test SystemLog
Starting test: VerifyReferences
......................... GSERVER2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : GS2
Starting test: CheckSDRefDom
......................... GS2 passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... GS2 passed test CrossRefValidation
Running enterprise tests on : GS2.intra
Starting test: LocatorCheck
......................... GS2.intra passed test LocatorCheck
Starting test: Intersite
......................... GS2.intra passed test Intersite
Server: gserver2.g2.intra
Address: 192.168.240.6
*** gserver2.g2.intra can't find g2: Non-existent domain
> gserver2
Server: gserver2.g2.intra
Address: 192.168.240.6
g2.intra
primary name server = gserver2.g2.intra
responsible mail addr = hostmaster.g2.intra
serial = 443
refresh = 900 (15 mins)
retry = 600 (10 mins)
expire = 86400 (1 day)
default TTL = 3600 (1 hour)
> wikipedia.org
Server: gserver2.g2.intra
Address: 192.168.240.6
Non-authoritative answer:
wikipedia.org MX preference = 10, mail exchanger = polonium.wikimedia.org
wikipedia.org MX preference = 50, mail exchanger = lead.wikimedia.org
polonium.wikimedia.org internet address = 208.80.154.90
polonium.wikimedia.org AAAA IPv6 address = 2620:0:861:3:208:80:154:90
lead.wikimedia.org internet address = 208.80.154.89
lead.wikimedia.org AAAA IPv6 address = 2620:0:861:3:208:80:154:89
Final benchmark results, sorted by nameserver performance:
(average cached name retrieval speed, fastest to slowest)
192.168.240. 6 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
+ Cached Name | 0,001 | 0,002 | 0,003 | 0,001 | 100,0 |
+ Uncached Name | 0,027 | 0,076 | 0,298 | 0,069 | 100,0 |
+ DotCom Lookup | 0,041 | 0,048 | 0,079 | 0,009 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
gserver2.g2.intra
Local Network Nameserver
195.186. 4.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,023 | 0,025 | 0,000 | 100,0 |
- Uncached Name | 0,025 | 0,071 | 0,274 | 0,065 | 100,0 |
- DotCom Lookup | 0,039 | 0,040 | 0,043 | 0,001 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns8.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
195.186. 1.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,023 | 0,026 | 0,001 | 100,0 |
- Uncached Name | 0,025 | 0,072 | 0,299 | 0,066 | 100,0 |
- DotCom Lookup | 0,039 | 0,042 | 0,049 | 0,003 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns7.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
8. 8. 8. 8 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,033 | 0,040 | 0,079 | 0,011 | 100,0 |
- Uncached Name | 0,042 | 0,113 | 0,482 | 0,097 | 100,0 |
- DotCom Lookup | 0,049 | 0,079 | 0,192 | 0,039 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
google-public-dns-a.google.com
GOOGLE - Google Inc.,US
UTC: 2014-11-03, from 14:33:12 to 14:33:29, for 00:17,648
15: 40
192.168.240. 6 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
+ Cached Name | 0,001 | 0,002 | 0,004 | 0,000 | 100,0 |
+ Uncached Name | 0,025 | 0,074 | 0,266 | 0,063 | 100,0 |
+ DotCom Lookup | 0,042 | 0,048 | 0,075 | 0,007 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
gserver2.g2.intra
Local Network Nameserver
195.186. 1.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
- Uncached Name | 0,024 | 0,073 | 0,289 | 0,067 | 100,0 |
- DotCom Lookup | 0,039 | 0,041 | 0,043 | 0,001 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns7.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
195.186. 4.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
- Uncached Name | 0,025 | 0,073 | 0,286 | 0,065 | 100,0 |
- DotCom Lookup | 0,041 | 0,066 | 0,180 | 0,037 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns8.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
8. 8. 8. 8 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,033 | 0,038 | 0,077 | 0,009 | 100,0 |
- Uncached Name | 0,042 | 0,105 | 0,398 | 0,091 | 100,0 |
- DotCom Lookup | 0,049 | 0,066 | 0,141 | 0,025 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
google-public-dns-a.google.com
GOOGLE - Google Inc.,US
UTC: 2014-11-03, from 14:39:59 to 14:40:12, for 00:13,363 -
Hi All
I am trying to create a shortcut via GP to point to our print server, so people can connect to optional printers. we have the following settings set in the policy.
Action Create
Type: File System Object
Path: Desktop
Target: "\\server"
Icon Path: C:\Windows\System32\imageres.dll
Icon index: 48
Shortcut Key: none
Run: normal window
But this is not working and is throwing the following error in a gpresult: Result: Failure (Error Code: 0x80070002)
Does anyone have any ideas why this is happening?
Thanks,
RichardPlease edit the policy as a "Shell Object".
http://technet.microsoft.com/en-us/library/cc753580.aspx
Alper YAZGAN * -
Eventlog 1030 group policy update error on Windows 2012 member server
group policy update is failing with event ID 1030
Computer policy is getting applied but User policy Failes. Other windows 2012 servers are successfully updating.
gpupdate /force
Updating policy...
Computer Policy update has completed successfully.
User Policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to retrieve new Group P
olicy settings for this user or computer. Look in the details tab for error code
and description. Windows will automatically retry this operation at the next re
fresh cycle. Computers joined to the domain must have proper name resolution and
network connectivity to a domain controller for discovery of new Group Policy o
bjects and settings. An event will be logged when Group Policy is successful.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results.Hi,
Before going further, I assume that the user account we were using is a domain account. As a result, we can use this account to log onto other domain computers to see if its
user policy settings can be updated successfully.
Besides, for troubleshooting this issue, we can try to retrieve Gpsvc.log to check this issue.
Regarding how to enable logging in the Gpsvc.log file, the following blog can be referred to for more information.
How to enable GPO logging on windows 7 /2008 r2 ?
http://blogs.technet.com/b/csstwplatform/archive/2010/11/09/how-to-enable-gpo-logging-on-windows-7-2008-r2.aspx
Best regards,
Frank Shen -
Not a tabular form, but getting row version identifier error.
APEX 4.1.0, Oracle 10g
Error is: Current version of data in database has changed since user initiated update process. current row version identifier = "47FAF7A2C1A5E49E0CF90D1320CCFC50" application row version identifier = "0"
I've seen this error in the forums for tabular forms, but my form is just a normal apex page with a standard fetch and a standard insert/update/delete process. It isn't a tabular form or a master/detail, just a simple form. There is not another person using the data. This happens on an update or delete and on several different pages for several different tables!
I've tried using debug, and from debug, I see that the error comes right after this:
...Execute Statement: begin begin select "NARR_ID","TEXT","PRJ_PROJ_ID","NARR_TYPE_PROJ"
into wwv_flow.g_column_values(1),wwv_flow.g_column_values(2),wwv_flow.g_column_values(3),wwv_flow.g_column_values(4)
from "BASIS"."NARRATIVES" where "NARR_ID" = :p_rowid for update ; end; end;
I more or less understand what the error is intended for. APEX produces a checksum of the table row values at some earlier point (maybe at the fetch?) and then produces another checksum of the table row values just before the update or delete. APEX then compares the two checksums.
Based on the error message, one of the checksums is "0". I'm not sure if the "application row version identifier" is the first checksum or the second checksum, but either way it shouldn't be zero. Right? So, why would this checksum be zero?
Edited by: JackieW on Apr 29, 2013 8:42 AMI upgraded to JDev 3.2 and rewrote my code to extend the new
version of EditCurrentRecord. Now when I deploy to 9ias I get a new error:
Error Message: java.lang.NullPointerException: I'm following the online help
to deploy but I must be missing something cause it works in JDev. Any
suggestions? -
I am getting the following warning in my Application Log:
Code Snippet
The user '<Printer Name>' preference item in the 'Default Domain Policy {31B2F340-016D-11D2-945F-00C04FB984F9}' Group Policy object did not apply because it failed with error code '0x8007007b The filename, directory name, or volume label syntax is incorrect.' This error was suppressed.
This fires off about every 1.5 hours. Is there a way to root out and stop this warning?
Thanks!It is being reapplied through background refresh, which happens about every 90 minutes. Remove the printer mapping from your Default Domain Policy and you'll stop getting the error message.
-
Group Policy Printer Error (0x80070005 Access Denied)
I am trying the deploy two network printers via group policy using Server 2008 R2 SP1. I created the GPO and added the printers from our print server under computer configuration so that it will apply to the computers, not just the users. After a computer in
the correct OU Gpupdates I recieve the following error in it's application event log:
WARNING: GROUP POLICY PRINTERS
Group Policy object did not apply because it failed with error code 0x80070005 Access is Denied. This error was suppresed.
Any suggestions or thoughts are appreciated. I have been dealing with this error and trying the figure it out for awhile now.Hi,
This issue mostly can be caused due to the incorrect permission settings.
Please try to perform the troubleshooting steps the following Microsoft TechNet blog provides.
Group Policies and Access Denied
http://blogs.technet.com/b/matthewms/archive/2005/10/29/413275.aspx
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Hp D110 when printing works doc get out of memory error
get out of memory error when print icon selected from Works
I was finally able to get the files to work by opening and saving in FrameMaker numerous times.
Re: your questions. . . I did not try importing directly. I linked and then generated. Yes, the linking did work with RH9 from the TCS 3.5. -
Trying to sync my macs but getting this... error connecting to the server
trying to sync my macs but get this .....error connecting to the server,check server name or ip address ?????
Same problem . . . any resolutions out there?
Maybe you are looking for
-
Can I use one Time Capsule to backup two MacbookPro in the same house?
Can a Time Capsule backup more than one Mac? Or do I need to buy one TC for each Mac I have ?
-
Using embedded oc4j in jdeveloper 10.1.3. EA failed
Hallo i have the following problem, and hope somebody can help me. i installed the jdev 10.1.3.EA 3412 on notebook with suse linux 9.2 and made a simple hallo world jsp. compilation was ok with no errors. when i run the jsp in jdev i get the followin
-
I'm traveling to India with my iPhone 6 plus. It shows it is connected to my home wifi in India but there is no network, no internet connection, no service. Please help as I cannot do anything with my iphone right now including imessages.
-
Anyone else know how to troubleshoot this when getting a "adobe.com login error"?
-
Classical Music is Searched by Composer-How?
Could it be that no one at Apple has ever had formal music education? In Verion 11 they (for some unfathomable reason) took away the Power Search option. Now you are left with Artist and Title and somekind of ranking. I have a news break for Apple,