Printhead Problem Resolved

Thanks to Ciara for her reply.  After talking to an HP representative regarding my printhead problem with theHP 6835 printer it was clearly a problem with the printer.  No amount of troubleshooting could resolve theproblem.  Was sent a new printer and it is working with no printhead problem messages.

Glad to hear this is resolved and you got a replacement Thanks Ciara

Similar Messages

  • How to resolve a printhead problem on a HP Officejet Pro 6835 printer

    I replaced the black printer cartridge and now I am getting a message saying there is a printhead problem.  Went on line and followed all the suggested fixes, ran the Print and Scan Doctor, still not working.  Any suggestions?

    scarlattid3,
    The cancel button should be located in the bottom right corner of the screen. The only thing is it's not going to show up until you start the print job or copy and then it should appear for you.
    Let us know if you are able to find this.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • HP Photosmart Premium C310 Series.......Printhead Problem

    I have the HP Photosmart Premium C310 Series Printer. It will no longer print. There is an error message of "Printhead Problem", with the instructions of:  Remove all Cartridges. Next, left black latch and remove printhead. Then re-install Printhead and Cartridges. I have done this several times with no success. Even went out and bought all new ink cartridges and tried those as well with no success. With this error message on the printer screen, it won't let me get off of that screen.

    Hi annie47here, and thanks for the reply.
    After reviewing the issue, it's possible you are experiencing printhead failures.  The best recommendation I could make would be to contact HP directly.  You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide.
    Thank you for posting on the HP Forums.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HT203554 MacBook Pro (15-inch, Mid 2010) intermittent black screen or loss of video. Can I still get this problem resolve by Apple or I'm screwed because the MacBook Pro (15-inch, Mid 2010) intermittent black screen or loss of video Quality Program has en

    MacBook Pro (15-inch, Mid 2010) intermittent black screen or loss of video. Can I still get this problem resolve by Apple or I'm screwed because the MacBook Pro (15-inch, Mid 2010) intermittent black screen or loss of video Quality Program has ended?

    You can have Apple replace the logic board, but it will be at your expense.  The free replacement program has ended.
    As a band aid you may try the following:
    https://gfx.io/
    This will allow you to run on only the integrated GPU.
    Ciao.

  • I've walked through all of the wi fi problem resolves. None have repaired my problem. It seems like it starts to connect then stops forever. Even typing it starts then stops then it will catch up?

    I've walked through all of the wi fi problem resolves. None have repaired my problem. It seems like it starts to connect then stops forever. Even typing it starts then stops then it will catch up?

    Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

  • Printhead Problem....I could really use your help. (Thank you!)

    Thank you to anyone who might help me.....
    I have been a loyal HP customer for a long time, but this printer (Photosmart Premium c310a) has been a problem from the beginning.  I am a painter who depends on crisp, clear prints.
    Now the error message on the printer is Printhead Problem.
    I have gone to the website and repeatedly cleaned the printhead, unplugged the printer and waited.....and still Printhead Problem. 
    It is suggested that I buy a new Printhead, but my experience over the years is that, if I go out and buy it, it won't solve the problem.  And I have invested a lot in ink cartridges for this model, so I'm not inclined to just junk the printer.
    I would really, really appreciate help.  Thank you.....
    Richard

    Hello rheyster,
    You are correct in stating that it could be an issue with the printhead. And Printhead needs to be replaced.
    However the only best option i think would be to trade-in this printer for a different model.
    If you are in USA, please call HP Tech Support. Tech support may provide a Trade-in option.
    Please call HP Tech Support for further assistance.
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Problems resolving .local DNS names

    Hi all - I was having problems resolving machine.local type names, and I found this article:
    http://docs.info.apple.com/article.html?artnum=107800
    This solution helped, but not completely.
    I am on a Mac mini running 10.4.8PPC.
    This unit is on a private IP network - 192.168.254.0/255.255.255.0
    This unit is staticly addressed - 192.168.254.31
    The network has a Windows Server 2003 machine doing DNS/DHCP
    The network has a domain of mynetwork.local
    I was experiencing the issue in this article:
    dig server.mynetwork.local would complete and resolve to 192.168.254.11
    ping server.mynetwork.local would fail to resolve.
    Adding local to the search domain solved this issue as described in the article.
    However, a new wrinkle arises.
    I frequently connect to other networks via PPTP, many running SBS 2003, which uses a company.local DNS scheme.
    Once connected, I can dig company.local names, but not mynetwork.local names (which I expected - as I am now resolving names through server.company.local). However, I can't ping company.local names, which prevents connection to the server.company.local OWA server, for example.
    Any thoughts? I tried putting
    mynetwork.local, company.local
    in the search domains field, but no joy...
    Thanks for wading through this long question - appreciate any replies...

    Playing Dr. Watson here...
    Are those other Networks Local but not on the 192.168.254.x subnet?

  • Printhead Problems

    My HP Officejet 6500 All in One Wireless quite suddenly is displaying the message that the Printhead is damaged or missing. I have removed the cartridges and cleaned the printhead carefully, and then reinserted it, but the displayed message is still there and nothing will print. Unfortunately, the printer just went out of warranty a few months ago. Any suggestions?

    Hi childrbe
    Have you tried cleaning the printer carriage contacts?
    Printhead Problem or Printhead appears to be Missing or Damaged
    Kind Regards
    Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Bass problem resolved - Can no one advise me please

    Has the new 80 gig Ipod had the previous bass distortion problem resolved ?
    The old 60 gig model showed significant bass distortion (bass drum etc) on some tracks and was a known problem.
    I am thinking of buying the new 80Gig tomorrow - or - the Creative model - -can anyone advise right away please /
    Thank you
    Brian

    Check through the forum and use bass distortion as a search - you will then see some time ago that a problem did exist. It was due as far as I know to the change of the output whcih caused an overlaod on deep bass especially when the equaliser was used. Apple knew about this and eventually posted a hardware 'upgrade' - however I do not know if this cured the problem as I then bought the Sony A3000. I would like to get the new Ipod but not if this problem still exists.
    HTH
    Brian

  • 'Printhead Problem' on week-old HP Officejet Pro 6830

    I purchased a HP Officejet Pro 6830 for around $130 only a week ago to be used at home for my study requirements. I was anticipating that this printer would be reliable and, for the price tag, last me a little over a week..
    Unfortunately 7 days after purchasing, my printer has displayed the message 'There is a problem with the printhead 0xc19a0023'.
    With very little instruction on how to solve such an issue I have spent hours searching online forums, the HP website and beyond. I have turned off my printer, 'reset' it, attempted to clean the printheads all to no avail and resulting in a colossal waste of time. Unfortunately your call centre is also closed so I am stuck without a way of printing my resources for tomorrow.
    What can I do to solve this problem?

    @Sarah204, Welcome to the forums!
    I read your post about the error code "0xc19a0023" you are receiving, along with the message that there is a problem with the printhead. To be frank with you, the troubleshooting steps you have tried for this type of issue have been all completed. I would next suggest trying to call HP's Technical Support directly again to let them know about the error code and the steps you have tried, and they will most likely issue a replacement printer.
    Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    I hope this gets resolved for you and wish you a great week ahead!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printhead problem oxc19a0020

    Suddenly it will not print.  I get error message "Problem with Print head oxc19a0020.  There is a problem with the printhead."  What and where is the print head.  Is this something that has to be cleaned or replaced?  Or is this a premanent problem?

    Hi , Welcome to the HP Forums! I understand that you are getting the error message "Problem with Print head oxc19a0020.  There is a problem with the printhead." With your HP Officejet Pro 6835, on Windows 7. I am happy to look into this issue for you! Please try the steps within this guide, 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Message Displays. If this guide does not resolve your issue, then the printer will need to be serviced/or replaced. Please contact HP, phone support for further assistance. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Best of luck!  “Please click the Thumbs up icon below to thank me for responding.”

  • Error "printhead problem please use setup cartidge that came with the printer"

    Hi, I have purchased a HP Deskjet 5525 All in one printer, it was working perfectly till 1 year, then i had not used it about 6 months, now when tried to use it again then it was throwing the error "Printhead is damaged, missing, not installed properly or damaged etc...",  then i cleaned the printhead and reinstalled it in printer then i inserted the cartidge now its generating the error "please use setup cartidge that came with printer" but among the setup cardige "yellow", "magenta", "Cyan" is accessible  by printer but when i use the black then it says "properly not installed, missing cartidge".
    So please tell me  do i need to purchase a new black cartidge, will it work? or what shoud i do ?
    cartidge NO- 685
    Thanks
    Nirmal

    Hi @nirmal007,
    Welcome to the HP Support Forum!  I understand you're having cartridge issues with your HP Deskjet Ink Advantage 5525 e-All-in-One Printer.  I would like to assist you with clearing up that error state and have some troubleshooting steps that may resolve the issue. 
    I recommend you try the following steps before you consider purchasing a new black ink cartridge.  Firstly after you've confirmed that your ink levels are not the problem (example - the level is above 10%), try a 'hard reset':
    Secondly:
    Make sure that the ink cartridges are properly vented and seated correctly
    If the vent on the top of the ink cartridge is clogged or obstructed, the ink cartridge might not work properly. Follow these steps to make sure that the ink cartridges are properly vented and seated correctly.
    Press the Power button to turn on the printer, if it is not already turned on. Wait until the printer is idle and silent before continuing.
    Open the cartridge access door. The carriage moves to the access area.
    Figure : Open the cartridge access door
    Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.
    Figure : Remove the cartridge from the slot
    Examine the vent area on each cartridge, above the HP logo on the top of the cartridge.
    Figure : Vent area on the top of the cartridge
    If the cartridge still has the orange pull-tab attached, pull to remove it.
    Figure : Orange pull tab
    If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.
    Figure : Clean the clogged vent with a pin
    Clogged vent
    With a straight pin, gently remove excess adhesive from the vent
    Unclogged vent
    With the nozzle and contacts facing down, slide the cartridge into its slot. Press down on the cartridge until it clicks into place.
     note:Make sure that each cartridge is installed in the correct slot. Match the shape of the icon and the color of the cartridge with the slot that has the same shaped icon and color.
    Figure : Reinsert the cartridge
    Repeat these steps to inspect the vents on each of the cartridges.
    Make sure that each cartridge is firmly in place in its slot. Run your finger along the top of the cartridges to feel for any that are protruding, and if any are, press down firmly until each cartridge snaps into place.
    Close the cartridge access door.
    Figure : Close the cartridge access door
    Source
    Thirdly, try cleaning your cartridge contacts:
    Manually cleaning the print cartridge contacts
    Follow the steps below to manually clean the print cartridge contacts:
    Gather the following items to clean the contacts:
    Distilled water (tap water may contain contaminants that can damage the print cartridge)
    Cotton swabs or other soft, lint-free material that will not stick to the print cartridge
    Open the print cartridge door.
    Remove the print cartridge and place it on a piece of paper with the ink nozzle plate facing up.
     caution:
    Do not to touch the copper-colored contacts or the ink nozzle plate with your fingersFigure : Do not touch copper-colored contacts
     caution:Do not leave the print cartridge outside the printer for more than 30 minutes. Ink nozzles exposed to the air longer than this may dry out and cause printing problems.
    Lightly moisten a cotton swab with distilled water and squeeze any excess water from the swab.
    Gently wipe the copper-colored contacts with the cotton swab.
     caution:Do not touch the ink nozzle plate. Touching the ink nozzle plate will result in clogs, ink failure, and bad electrical connections.
    Repeat steps 4 and 5 until no ink residue or dust appears on a clean swab.
    Insert the print cartridge in the printer, and then close the print cartridge door.
    Source
    If you've tried all of the above noted steps and you're still unable to use the black cartridge, you may need to pick up a new one.  Let me know if this helps.  Best of luck! 
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Photosmart 7510 e-all-in-o​ne series/ Printhead problem.

    Our photosmart 7510 e-all-in-one series has an message that reads 
    Printhead appears to be missing, not detected, or incorrectly installed.
    Not able to locate the problem.
    Happened right after I changed the ink. 

    Hello harry4955,
    Welcome to the HP Support Forums!
    I see that the HP Photosmart 7510 is displaying an error regarding the print head is missing, stating after changing your ink cartridges.
    I was able to locate this HP document: 'Missing or Failed Printhead' or 'Printhead is Missing, Not Detected, or Not Properly Installed' Mes.... I hope it helps, if not you may need to call HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Officejet Pro L7780 Printhead Problem

    My printer is 2.5 years old and has light home use.  The printheads started failing...I had to run "clean printheads" before attempting to print anything.  HP Solutions said "Printheads OK."  Still, the printer was unusable.
    I bought 2 new printheads, cleaned the printhead contacts in the printer, installed the printheads.  Now the printer won't do anything and HP Solutions says printhead health is "bad," and the display window on the printer says both printheads have a problem.
    I re-inserted the old printheads and the "problem" messages disappeared, HP Solutions says printhead health is "good," but the printer won't print.
    I've done every solution suggested on user forums.
    I've done a full factory reset and flashed new firmware.  No help.  Anyone had a similar problem and been able to solve it?
    Thanks.

    Sorry you're having trouble with your L7780. HP doesn't recommend routinely cleaning the electrical contacts before you install new printheads. I'm worried that you might have transfered some ink onto the contacts, since your problem changed from a print quality problem to a error message. I would suggest that you try cleaning the electrical contacts one more time. Try the instructions in this document: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01628836&tmp_task=solveCategory&lc=en&dlc=en&cc... - make sure you let everything dry completely before you reinstall the printheads.
    Also, for print quality issues, this is the HP support doc http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01957673&tmp_task=solveCategory&lc=en&dlc=en&cc...
    I work on HP's behalf.

  • Printhead problem

    I have a photosmart b109a. i haven't used it for about a month but the ink was needing replaced. i switched on, all fine. i changed the ink then i got a message on the printer saying to remove ink, then printhead, then replace. i did nothing happened the computer says the printhead is either damaged or missing. how can it be damaged? i haven't touched it. i have already changed the black awhile back and all was fine.
    please help.

    It may be a false error message, or it may just be that when you replaced the ink that the printhead got jostled.
    Try unpluging the printer and powering back on with the cartridges and printhead out.  If that doesn't resolve the issue try this document
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01944580&cc=us&lc=en&dlc=en&product=3777182&tmp...
    Also follow the steps in this document for checking the venting on the new cartridges
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458034&cc=us&lc=en&dlc=en&product=3777182&tmp...
    Trained on Mac and Windows for inkjet printers.
    **Although I work for HP, I do not represent them in these forums**
    If I've resolved your issue please mark as Accepted Solution so others can use my advice! ^.^

Maybe you are looking for