Printing 6 slides in one portrait

The slides are cut off at the edges. How can we fit the slides into the paper?
It is possible to do so in landscape mode, but not portrait mode.
Thanks for your help!

Hi Azoolkool, I figured it out, so here goes: Under Keynote open your file, make sure your View is set up as Navigator view; this way you can see the mini-sidebar on your left side. On the individual slides highlight the slides you want printed by holding down the shift button and click on for example 7-12.
Now click on File>Print, go to pages and enter in section From: 7 to: 12, Right under this area u should see Keynote drop down bar and on the bottom left area it states: PRINT with some options there, just check off "Individual Slides". To the right of the print section it should state OPTIONS; to keep your slides in color remove the check on "Don't print slide background or object fill". Do check "Add borders around slide" and "Use page Margin".
Under the FROM and TO page area where you put 7 and 12 in - there is a drop down bar that defaults to Keynote, click on this and go to PAGE ATTRIBUTES to change your page orientation to portrait or landscape. Once done proceed to next step and click on PDF on the lower left hand side and enter into "OPEN PDF IN PREVIEW". It should default to the 7th page as full screen along with the sidebar appearing.
Now click on File in the preview menu bar and then PRINT - Now uncheck the AUTO RATE and now check the "SCALE TO FIT" - "FILL ENTIRE PAPER". Then below that where it says images per page , change it from 1 to 6 and notice the print preview with six slides on one page. Now hit PRINT on the lower right hand side...
Hope this helps, I had to learn the hard way today "Trial and Error" as the manual does not state this clearly. Also I'm sure there is a better way but no one has responded yet. Let me know if it works.
Regards

Similar Messages

Printing 6 slides per page in Portrait orientation?!

Hello,
I have iWork '08. In the past I always printed 6 keynote slides per page, with the page oriented in portrait orientation. However, now it refuses to do that. Even when I have changed the orientation to portrait in the page setup (under 'File'), it refuses to use that orientation when I print. In the print settings I use individual slides, and then in layout I tell it to print 6 slides on a page. At 1, 4, 9 and 16 slides per page, it does use portrait orientation. At 2 and 6 slides per page it suddenly uses landscape orientation. I have checked and checked again, but the page orientation cannot be changed within the print menu. Only in the page setup under file, which doesn't help at all.
Why does it do this and how do I get rid of it?! I want to print 6 slides on a portrait oriented page!
Thank you.

Hi Azoolkool, I figured it out, so here goes: Under Keynote open your file, make sure your View is set up as Navigator view; this way you can see the mini-sidebar on your left side. On the individual slides highlight the slides you want printed by holding down the shift button and click on for example 7-12.
Now click on File>Print, go to pages and enter in section From: 7 to: 12, Right under this area u should see Keynote drop down bar and on the bottom left area it states: PRINT with some options there, just check off "Individual Slides". To the right of the print section it should state OPTIONS; to keep your slides in color remove the check on "Don't print slide background or object fill". Do check "Add borders around slide" and "Use page Margin".
Under the FROM and TO page area where you put 7 and 12 in - there is a drop down bar that defaults to Keynote, click on this and go to PAGE ATTRIBUTES to change your page orientation to portrait or landscape. Once done proceed to next step and click on PDF on the lower left hand side and enter into "OPEN PDF IN PREVIEW". It should default to the 7th page as full screen along with the sidebar appearing.
Now click on File in the preview menu bar and then PRINT - Now uncheck the AUTO RATE and now check the "SCALE TO FIT" - "FILL ENTIRE PAPER". Then below that where it says images per page , change it from 1 to 6 and notice the print preview with six slides on one page. Now hit PRINT on the lower right hand side...
Hope this helps, I had to learn the hard way today "Trial and Error" as the manual does not state this clearly. Also I'm sure there is a better way but no one has responded yet. Let me know if it works.
Regards

Printing 6 slides per page

For my science class we have to print out lecture notes, and my teacher says to print 6 slides per page, and this time it has to be in color. My personal printer is the only one that prints color, the family computer doesn't even have PowerPoint anyway, but that prints black and white. I have Keynote, and when i try to print 6 per page, it prints one whole column of 6 and moves to the next page.
( file:///Users/Joe/Desktop/Keynote%20Issue.png )
I want them all spread out like Word does. Can anybody please help?

Hi Azoolkool, I figured it out, so here goes: Under Keynote open your file, make sure your View is set up as Navigator view; this way you can see the mini-sidebar on your left side. On the individual slides highlight the slides you want printed by holding down the shift button and click on for example 7-12.
Now click on File>Print, go to pages and enter in section From: 7 to: 12, Right under this area u should see Keynote drop down bar and on the bottom left area it states: PRINT with some options there, just check off "Individual Slides". To the right of the print section it should state OPTIONS; to keep your slides in color remove the check on "Don't print slide background or object fill". Do check "Add borders around slide" and "Use page Margin".
Under the FROM and TO page area where you put 7 and 12 in - there is a drop down bar that defaults to Keynote, click on this and go to PAGE ATTRIBUTES to change your page orientation to portrait or landscape. Once done proceed to next step and click on PDF on the lower left hand side and enter into "OPEN PDF IN PREVIEW". It should default to the 7th page as full screen along with the sidebar appearing.
Now click on File in the preview menu bar and then PRINT - Now uncheck the AUTO RATE and now check the "SCALE TO FIT" - "FILL ENTIRE PAPER". Then below that where it says images per page , change it from 1 to 6 and notice the print preview with six slides on one page. Now hit PRINT on the lower right hand side...
Hope this helps, I had to learn the hard way today "Trial and Error" as the manual does not state this clearly. Also I'm sure there is a better way but no one has responded yet. Let me know if it works.
Regards

How to print all columns in one page

Hi,
Can anybody explain me how to print all columns in one page.we have around 15 to 20 columns for 4 reports and all these reports are build on one multiprovider.we are using BW 3.5.
Can anyone explain me how to print ALL COLUMNS IN ONE PAGE .currently they are getting all columns in 2 to 3 pages. They are using PORTAL to run the reports here.
Is it possible to do by customizing Webtemplate or by macros in Workbook.Please help me
Edited by: kotha123 on Oct 11, 2010 5:58 PM

Hi,
Your best bet is to use a workbook template or else Excel to pdf option...Thanks

Print multiple pages on one page in Preview?

I tried to print a PDF in OSX Lion and I was unable to find the option to print multiple pages on one Page. Instead there is an option to print multiple copies of pages on one page. Does anybody know where I can find the old option from (as in Snow Leopard, Leopard, Tiger..)? (See screenshot.)
Thanks!
roboter

Look under the "Vorschau" menu for the Layout menu, and then choose "Seiten pro Blatt."
Hope this helps.

Print multiple photos on one page to printer

I am new to macs, and I can't figure out (using iphoto 11) how to just print multiple photos on one piece of 8 1/2 X 11 paper in my own printer at home. I want to choose the size of each picture (like one 4X6 and two wallets on one page. How do I do this? it seems I can only print one pic per page when I use the print function in iphoto. Please help! If i can't do this basic thing I feel like I just wasted a couple thousand dollars on a really expensive piece of junk.

This is a detailed set of instructions I made for my mother to use. Hope it helps.
To print single or multiple photos in iPhoto
Open iPhoto
If photo(s) are not already in iPhoto then dragand drop into iPhoto
Locate photo(s)
Select (highlight) photo(s)
Click File
Click Print
New window pops up
Select border type on left side (standard, etc.)
Select Print Size at bottom right (2x3, 3x5,etc.)
Click Customize
New window opens
On bottom right are new icons
IGNORE Print settings -are the options you chose in steps 7a, b & c
IGNORE Themes - is thesame as step 7a
IGNORE Background –ignore in most cases
IGNORE Borders –default is 1 (use default in most cases)
Layout (select 1 or 3 in most cases)
1is horizontal photo
IGNORE 2 is horizontal photo with text below
3is vertical photo
IGNORE 4 is vertical photo with text below
SettingsClickon Photos per page
If you want only 1 copy of each photo you selectedon each page then choose Single photo per page
If you want 2, 3 or 4 different photos on eachpage then choose Multiple photos per page
If you want many copies of the same photo oneach page then choose Multiple of the same photo per page
ClickPrint on the bottom right
Newwindow pops up
If the arrow (triangle) to the right is pointingdown click it so it points up and displays additional options
Choose number of copies (pages to print)
ClickPrint

Fbl5n: The printer provides me only one customer items for each page...

Hi all,
launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
I'd like obtaining more customer items for each page...
What to do?
Thanks

Hi Umberto..
Thats how the standard report works..
To meet your requirement, you would probably need to look at another standard report.
In case you need further clarification, please feel free to write to me..
Good Luck!
Lucid-Mind...

How to print two sides with one page?

I have a PDF that is one page long and I'd like to print the same thing twice (front and back) on one page. Can I do that?
I've tried printing two copies with the printer set to double-sided, but it just printed two sheets with one side on each sheet.

Well sure; Go back to the authoring application that created the documents and do a 2-UP page. Make the existingg page large enough to accomodate the extra content. Is that what you're asking or do you really mean print to a printer with a back up ? In that case just flip the page over and print page 2 on the other side.
Or are we missing something ?

How do you get rid of white space when you are printing multiple pages to one sheet of paper?

How do you get rid of extra white space when you are printing multiple pages to one sheet of paper? When printing multiple pages to one sheet of paper Acrobat won't let you select the "zoom" for printing.
Thanks

Take a look at Quite Imposing.

How can I print multiple images on one sheet: PSE 10/Mac?

When printing, I can have all of my images in the dialoug box - but cannot figure out how to get more than one image on a sheet! For example, I am printing several photos a 2x2, and want to put as many as possilble on 1 sheet instead of using a seperate sheet for each image. I am on a Mac.
Any ideas?? I can't seem to find the answer. Thanks!

Barbara B.
Thanks for the reply to wdwpartners question.
I am new to PSE 10 (on Windows 7) and having the same problem with printing multiple photos on one sheet. With 14-20 images both contact sheet and picture package force you into 2x2 prints, not the image's original HxW ratio thus loosing some of the image on paper. Am I missing something?
My old version of PSE gave me an option to "print multiple photos" and custom select the image dimentions which was very useful to me. Please let the powers that be know this user asked for that option back!!
Thanks for a reply.

How to print multiple addresses on one sheet of avery labs using Pages?

How do I print mulitple addresses on one sheet of avery labels?
I used Numbers to make a database.
I used Pages to use the Avery label template.
I formatted the labels for the database but it shows my first sheet of labels as my first addressee and my second sheet as the second addressee. I want multiple addresses on one sheet of labels!!

What version of Photoshop do you have? Is it the full version or elements? What OS do you have and it's version?

How to print multiple copies on one page ?

How to print multiple copies of one document on one page ?
in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
how do I make the same operation in Indesign.
thanks

Hi, Peter S.
>I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
* It's just an alternative to copy/paste and step/repeat.
* For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
Regards,
Peter Gold
KnowHow ProServices

How to Print Multiple Barcode in one line

Hi All,
I am printing barcode using <c1>&lwa_itab-matnr</>. now i have a query i want to print in the same line one more bar code with the values. but i m not able to print it. will any one pls help me out in this how i will print more than one barcode in one line.
i have tried this syntax also
<c1>&lwa_itab-matnr& &lwa_itab-matnr&</>.
But it is not giving gap between two barcode. it is considering space and converting space also in barcode which i don't want. I want to print two barcodes separately with some space. How will i do this.
Pls answer it. it is very urgent.
I am doing this in smartforms.
Thanks
Garima
Edited by: Garima Mittal on Jun 18, 2008 12:34 PM

hi,
try like this.
<c1>field1_</c1>_ <c1>field2_</c1>_
give the two fields in the same line.
so this will help u in printing the barcodes in the same line
please reward me if helpful.
regards,
Reddy.

Can i change my printer email address to one i can remember

how do I change my printer email address to one I can remember

Hi allieb2901,
You can customize your ePrint email address at ePrintCenter.com. After signing into the website, just click the change button next you your ePrint address in blue.
If you have not registered your printer at ePrintCenter.com, print out the ePrint information page that has the 3-step process, or if you need clarification please post again.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to print two voucher in one page?

HI,
we want to print two voucher in one paper. what are the steps to be taken in sapscript? is it purely relted to SPAD?
Regards,
lijo Joseph

hi joseph,
i'm not sure how related this would be to your concern, but in my place, we've implemented that by sizing a voucher as half a page, so that when we print vouchers, the printer would know that one page is half of a regular page. SPAD is one place to fix, but the actual printing program and SAPScript was also customized so that it would send two vouchers for printing consecutively, and would fit in one page.
ryan.

Printing 6 slides in one portrait

Similar Messages

Maybe you are looking for