Printing 6 slides per page in Portrait orientation?!

Hello,
I have iWork '08. In the past I always printed 6 keynote slides per page, with the page oriented in portrait orientation. However, now it refuses to do that. Even when I have changed the orientation to portrait in the page setup (under 'File'), it refuses to use that orientation when I print. In the print settings I use individual slides, and then in layout I tell it to print 6 slides on a page. At 1, 4, 9 and 16 slides per page, it does use portrait orientation. At 2 and 6 slides per page it suddenly uses landscape orientation. I have checked and checked again, but the page orientation cannot be changed within the print menu. Only in the page setup under file, which doesn't help at all.
Why does it do this and how do I get rid of it?! I want to print 6 slides on a portrait oriented page!
Thank you.

Hi Azoolkool, I figured it out, so here goes: Under Keynote open your file, make sure your View is set up as Navigator view; this way you can see the mini-sidebar on your left side. On the individual slides highlight the slides you want printed by holding down the shift button and click on for example 7-12.
Now click on File>Print, go to pages and enter in section From: 7 to: 12, Right under this area u should see Keynote drop down bar and on the bottom left area it states: PRINT with some options there, just check off "Individual Slides". To the right of the print section it should state OPTIONS; to keep your slides in color remove the check on "Don't print slide background or object fill". Do check "Add borders around slide" and "Use page Margin".
Under the FROM and TO page area where you put 7 and 12 in - there is a drop down bar that defaults to Keynote, click on this and go to PAGE ATTRIBUTES to change your page orientation to portrait or landscape. Once done proceed to next step and click on PDF on the lower left hand side and enter into "OPEN PDF IN PREVIEW". It should default to the 7th page as full screen along with the sidebar appearing.
Now click on File in the preview menu bar and then PRINT - Now uncheck the AUTO RATE and now check the "SCALE TO FIT" - "FILL ENTIRE PAPER". Then below that where it says images per page , change it from 1 to 6 and notice the print preview with six slides on one page. Now hit PRINT on the lower right hand side...
Hope this helps, I had to learn the hard way today "Trial and Error" as the manual does not state this clearly. Also I'm sure there is a better way but no one has responded yet. Let me know if it works.
Regards

Similar Messages

  • Printing 6 slides per page

    For my science class we have to print out lecture notes, and my teacher says to print 6 slides per page, and this time it has to be in color. My personal printer is the only one that prints color, the family computer doesn't even have PowerPoint anyway, but that prints black and white. I have Keynote, and when i try to print 6 per page, it prints one whole column of 6 and moves to the next page.
    ( file:///Users/Joe/Desktop/Keynote%20Issue.png )
    I want them all spread out like Word does. Can anybody please help?

    Hi Azoolkool, I figured it out, so here goes: Under Keynote open your file, make sure your View is set up as Navigator view; this way you can see the mini-sidebar on your left side. On the individual slides highlight the slides you want printed by holding down the shift button and click on for example 7-12.
    Now click on File>Print, go to pages and enter in section From: 7 to: 12, Right under this area u should see Keynote drop down bar and on the bottom left area it states: PRINT with some options there, just check off "Individual Slides". To the right of the print section it should state OPTIONS; to keep your slides in color remove the check on "Don't print slide background or object fill". Do check "Add borders around slide" and "Use page Margin".
    Under the FROM and TO page area where you put 7 and 12 in - there is a drop down bar that defaults to Keynote, click on this and go to PAGE ATTRIBUTES to change your page orientation to portrait or landscape. Once done proceed to next step and click on PDF on the lower left hand side and enter into "OPEN PDF IN PREVIEW". It should default to the 7th page as full screen along with the sidebar appearing.
    Now click on File in the preview menu bar and then PRINT - Now uncheck the AUTO RATE and now check the "SCALE TO FIT" - "FILL ENTIRE PAPER". Then below that where it says images per page , change it from 1 to 6 and notice the print preview with six slides on one page. Now hit PRINT on the lower right hand side...
    Hope this helps, I had to learn the hard way today "Trial and Error" as the manual does not state this clearly. Also I'm sure there is a better way but no one has responded yet. Let me know if it works.
    Regards

  • Keynote '09 Handouts - Problem printing 6 slides per page

    With Keynote '09, I'd like to print handouts of 6 slides per page, where the slides are of reasonable size, take up most of the space on the page, and are not oriented in a single vertical column. I used to be able to accomplish this with earlier versions of Keynote, but can't figure it out in Keynote '09. Anyone know the secret? Seems like a major flaw in the software.

    In the Print dialog box, tell Keynote to print Individual Slides. Then go to Layout and tell the printer to print 6 slides per page and select the layout option that you would like.

  • Print 6 Slides per Page

    Is it possible to have Keynote print 6 slides per page the way PowerPoint for Windows does (3 slides in each of two columns on the page), rather than 6 slides vertically along the left side of the page?

    sure thing u can do this do a cmd+p and then choose the drop down menu of keynotes and say print individual slides and then choose drop down menu of layout and say pages per sheet as six and there u have it printing isx slides just like in a ppt on a single page covering the entire page i cant imagine the apple guys on the phone not knowing this.

  • Printing multiple slides per page for pdf

    Hey guys. I just downloaded 10.10.1 and I'm unable to print multiple slides per page for my pdf files. Usually before I print, I can choose an option if I want to have 4 or 6 slides per page printed (as this helps to save paper and is how I have my notes for school). But now, it says "copies per page" instead of "slides per page". So the print preview shows the same 1 slide printed 6 times on each paper, instead of 6 different slides on 1 paper (which what is what I was able to do before I downloaded Yosemite).
    Does anyone know how to print multiple slides per page for pdf files???

    Did you try the Layout panel? Page per sheet?

  • Printing multiple zoomed slides per page

    I'm having trouble configuring Adobe Reader's print settings. I want to print 2 slides per page at 130% zoom for each. I can currently print a page zoomed in at 130% and print 2 slides per page, but I can't do both at the same time.
    David

    Okay, I just struggled for a good 45 minutes until I finally figured it out. Here it is, step by step.
    -Go to print and hit the little box with the arrow facing up to display the additional screen
    -While in the "keynote" section on the drop-down box, select "Individual Slides"
    -Click on the "layout" and select how many "pages per sheet" you would like (I believe both 6 and 9 are an option, and I think you'd want the first option
    -Go back to the "keynote" section and select that would want all the slides printed, and you should be good to go! I just did it exactly how I described it and I also have iWork '09
    Hope I helped!
    I actually just thought of something. If you're doing what I described above and it's still not working, when you're on the keynote part and under the printer name it says "pages: all or from _ to _", trying putting in from slides 1 to (however many you have) and try it that way.
    Message was edited by: fashion.monica

  • Since downloading the 2013 Keynote upgrade, the slide image size on handouts with 3 slides per page option is very small. Is there a way to make the slide size larger while still keeping 3 slides per page   lines?

    With the new Keynote upgrade (version 6.1), the slide image size on handouts is very small, which makes it difficult to read slide content when compiling lecture notes for students. Is there a way to make the slide size larger while still keeping to a format of 3 slides per page with lines?

    A number of posts have reported the same issue, two workarounds:
    1
    check the paper handling options or equivalent in your print dialogue box and set to scale to fit

    in the Keynote option, in the dropdown menu in the Print section, select Individual Slides
    then choose Layout, and set the number of pages, when printed you will have multiple pages on a single sheet.

  • Create a PDF with 6 slides per page from a ppt ALL on the iPad

    Is there any way to create a PDF file with six slides per page from a PowerPoint presentation using only an iPad (and apps)?
    I know how to do this on a Mac (i.e. Print > 6 per page> save as PDF) but is there a way I can do this all on the iPad?
    Basically i want a way to output a ppt or keynote document with 6 slides per page using only the iPad. I have both Keynote and PowerPoint for iOS on my iPad.
    any help would be much appreciated!!
    p.s. I'm using an iPad 2 running iOS 7.1.2 ( but will be updating to iOS 8 in the next few days when it comes out). Jailbreaking is not an option!!

    iWork for iOS
    Try asking here. It's your best chance of getting an answer.

  • How to save a pdf with multiple slides per page

    I have multiple pdf files that I would like to combine but for some of those files, there were originally from powerpoint. For those files, I would like to change the pdf so that there are multiple slides per page. I don't have a copy of the original powerpoints. I am trying to find an easy way to do this because I have at least a hundred pdfs to do. Thank you!

    You could print a PDF to the Adobe PDF printer, and select multiple Pages per Sheet on the Layout tab of the printer Properties dialog. Printing a PDF to PDF is generally frowned upon, but once it a while it comes in handy. It could have some unwelcome side effects though like wiping out your carefully crafted accessibility tags, bookmarks, and some document properties.

  • Printing 4 photos per page in iPhoto 9

    In iPhoto 6, there was a process involving a few buttons to print four photos per landscape page. That has apparently disappeared from iPhoto 9.
    There's also no apparent way to print to landscape on an HP photosmart 6440 printer in iPhoto 9.
    Are these processes still here but buried, or is it now just not possible to do what was done in iPhoto 6?

    Select the 4 photos, click print and select the printer, paper size and print size and click customize - click on the settings icon in the tool bar and select print multiple photos per page (the print size times 4 will have to fit the page of course) and click print - select printer specific options (landscape/portrait, paper source, etc from the pull down menu toward the middle of the print window - if i is not there click the gray triangle to the right of the printer name to expand the window
    LN

  • How to print multiple sheets per page?

    Please advise how, if it is possible, to print multiple sheets per page with Acrobat 7.0 Pro.<br /><br />I have a PDF that's about 24" x 60". I'd like to make a "poor man's poster" by printing on several pages and taping them together -- sort of like Microsoft's "Fit to <x pages> tall by <y pages> wide" feature. Can this be done with Acrobat 7.0 Pro?<br /><br />Thanks.<br /><br />-Kurt

    That is typically a function of the print driver for Acrobat. One way to do it is to print to a new PDF and select the printer properties and select multi-up. Bill

  • 1099 Form - Misc doesn't print 2 forms per page.

    The 2007A PLD form that we have prints only 1 form per page.  The 1099 forms that we have for MISC have 2 'forms' per page.  I have tried scaling the size of the repetitive area so 2 vendors print per page, but I am unsuccessful.  How does PLD know how many vendors (1099's) to print per page?

    Our organization is having this issue with the new Adobe forms that were released. The 1099 smartforms print 2 forms per page but the 1099 adobe forms are only printing 1 form per the OSS  note that was just released - Note: 1949022. Is there somewhere in config that we can select to print 2 per page?
    We are using IDWTCERT_US_1099MISC which will print just 1 form per page ( we also had to make some adjustments because the top gets cut off...)
    form IDWTCERT_US_1099MISC1 will print 2 forms per page but it is not a new vendor that prints on the form it is a copy of the first on the page
    The 1099 Interest adobe form prints 2 per page with IDWTCERT_US_1099INT - this is curious too because the smartform prints 3 forms per page
    Has anyone else experienced this issue? Do you know how to resolve it?I am considering putting in a problem report.
    Thank you

  • Printing 2 Copies Per Page

    Hi Experts,
    I have a requirement to Print 2 Copies Per Page in Smart form.
    Can you Please help me on this.
    Regards
    Manjari

    Hi Manjari
    Use copies window and write below logic in program lines.
    if sfsy-copycount = 001.
       text = 'customer copy'.
    elseif sfsy-copycount = 002.
       text = 'company copy'.
    endif.
    Regards
    Murali Papana.

  • IPhoto How to print multiple photos per page.

    How do I print multiple photos on one page using iPhoto 10.5.1?

    You've done it in the past - but not with iPhoto '11 version 9.5.x
    with iPhoto '11 version 9.5.1 (there is no version 10.5.1) the only way to print multiple photos per page is as I explained - and going back to a [revious is not an option as previous versions will not run under OS X 10.9.3 and previous versions can not read the library after it is upgraded to version 9.5.x
    the way you do it is
    For now a work around is to duplicate the photo in iPhoto (this does not increase disk storeage requirements) and print multiple copies at once
    To print 4 you must make 3 duplicates and select them and print all four
    LN

  • How can I print multiple photos per page?  It was simple in earlier versions of iPhoto.

    How can I print multiple photos per page?  It was simple in earlier versions of iPhoto.

    Do you want to print several different photos per page or multiples of the same photo?
    If you want to print several different photos,select them all at once and press command-P for "Print".  Pick the Custom Layout and adjust the photo size suitably.
    If you want multiples of the same photo, duplicate the photo several times and select all copies at once, then press command-P.

Maybe you are looking for

  • Filename from payload - FTP receiver adapter

    Hello everyone! I have a scenario wherein I need to get the value from a field coming from an IDOC and then give that value as the "filename" of the file that is saved in the FTP folder. IDOC > XI > FILE For example, if /ORDERS05/IDOC/E1EDK02/BELNR =

  • Download report result views in separate sheets

    Hi, I have a requirement in OBIEE report in which the result is being displayed in Pivot table as well as Chart view. My requirement is while downloading the report in excel sheet, I want the report view needs to be downloaded in 02 separate workshee

  • Transferring  from old ipad to new

    how do I transfer all my data from my ipad 2 to the new iPad Air?

  • Ask user for input after Workflow has already started?

    I am in the process of creating an "expense report" declarative workflow in Designer. I want to have it start automatically when a new document (here, an Excel file) is uploaded to the Library. I also want some user input (e.g. "Is this ER urgent?").

  • How can  I export sbconfig.jar from  aqualogic serice bus 9 ???

    I am trying to find a way to export a sbconfig project from the oracle/bea aqualogic 9 . as far as I can see this is possible with newer version of the osb, like 11g