Printing 81/2"x 11" photos on Photosmart d110a

The printer won't take the page. I get a gear grinding noise instead. Works with regular copy paper. Have not tried smaller photo paper because I don't want to waste the money if that won't work, either.

Hi there ,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
http://goo.gl/DBQlk
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

How do I print from android samsung infuse phone to photosmart d110a

how do I print from android samsung infuse phone to photosmart d110a...I can click all my coupons and email them (won't print) but no option (like on iphone) to print...
HELP..FRUSTRATED.
Vicky

Hi,
Please look at this:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/How-do-I-print-from-my-droid-II-smartphone-cc-...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Cannot print photos from PhotoSmart

I am unable to print photos in PhotoSmart. Once I select a photo and say "print", I only get a message saying that the photo size is too large for the paper size. I am unable to change the paper size in the menu to the right. Thus, I cannot print anything. All of the other functions appear to be working.

Good morning,
If you post this question in the printing section of the forum, it will probably get better exposure to folks who know the printers better than most of us in this section do.
http://h30434.www3.hp.com/t5/Other-Printing-Questions/bd-p/Printing
The link takes you to the Other Printing Questions section. That might be a good place for it, or perhaps one of the other printing sections.
Thanks, and good luck,
GeorgeFN
I work on behalf of HP.

In ability to print photos from PhotoSmart

After selecting Print in Photo Smart, a message comes up which says that the paper size is too small for the print. Print stays grayed out and there is no way to change the print size/paper size. I'm using the HP TouchSmart 600 and printing to an HP all-in-one printer. I can select photos, edit them in different ways, but not print.

Hi pobby,
I understand that you are attempting to print from your printer to an HP computer, and I would be happy to assist you in this endeavor!
I will need to know what version of Windows Operating System you computer is running, as well as the product and model number of your printer.
In terms of connection, is your printer connected with a USB cable or is it connected to a network? If you are connected wirelessly to a router, how far away is your router from your printer?
Are you able to make a photocopy from your printer in color (provided it is an copier/ printer/ scanner)? If you are, are you able to print a document from notepad?
In the meantime, you can download and run the HP Print and Scan Doctor to diagnose any minor software or connective issues.
Please post back with the necessary information. I will be looking forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How to print a series of index photos billfold sized photos

I would like to know how to print index sized photos as well as a series of wallet size photos (all of different subjects) on teh photosmart 7520 all in one....there has to be a way to do it.
This question was solved.
View Solution.

Thanks, Banhien.
Sharon, here's a link to the multi-up prints templates, which put multiple photos on a page:
Learn More: Multi-up Prints
For more options, try the collage print projects. Both are in the Prints menu.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Printing on 4 x 6 photo paper

How do I print from my computer onto my new printer's 4 x 6 photo paper? I have an HP Photosmart 6510

Hi there,
This article should cover the process if you are using a MAC and if you are windows you can try this artilce. Let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

I am trying to re-print a portion of a photo enlarged through "poster" and can't get just the one "page" to print. Does anyone have a solution?

I am trying to re-print a portion of a photo enlarged through "poster" in the print dialog box. The original photo printed just fine with the exception of one "page." This is what I'm trying to re-print. I have gone into the Multi- page box clicked on 4 x 4 and then selected the pages I did not want to print. This isn't working as it prints some pages and doesn't print others. All in all it is using a tremendous amount of ink for this project. Additionally I am printing on fabric which involves a deal of time in that preparation. The waste factor is turning into a huge cost. It should just be a simple thing to tell the print dialog box what I want it to do and have it do it. Help, does anyone have a solution?

Hi Pat,
Yes I marked the question as Assumed Answered. I needed to move on. I have never taken part in a forum and couldn’t wait any longer for any input so not wanting anyone to waste the time answering me, I marked the question as assumed answered. I guess this was the wrong thing to do and I apologize to the forum.
I did go another route and loaded and enlarged the photo in Photoshop Elements, Then cropped the photo to the area I needed to reprint. I probably should have done this in the first place!
Again, my apology to the forum for my lack of patience in waiting for a reply.
Diane Harris
Sent from Windows Mail

Print quality on Epson Stylus Photo R800

Hi...
I'm using Lightroom 3.6 and an Epson Stylus Photo R800. This printer is capable of printing very high quality pictures, as I know by using it for almost 5 years.
I have bought Lightroom about 6 month ago. I have tried anything I can think off to get those fabulus pictures out of my Epson printer. I alterd color managment settings, changed print resolutions, downloaded new printerdriver, ... Nothing works. Print quality when printing from Lightroom is very poor. Bad colors (dark), stripes over the whole image, it looks like nothing realy.
One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi.
I see a lot of discussion going about print quality with lightroom... I think however this is a more basic problem. My print qualiti is realy very very bad...
Does anyone have similar problems or (even better) a hint to a solution?
Note,
When I export a picture to .jpg format (I shoot in RAW only), and print this directly from Windows, I do get the perfect picture a was used to... I cannot believe that Lightroom is unable to do the same.
Thanks!
Erik.

Sorry for calling you 'Frank' Frans...
Vriendelijke groet,
Erik Henken.
Op 3 jan. 2012 om 20:23 heeft "c.frans w" <[email protected]> het volgende geschreven:
Re: Print quality on Epson Stylus Photo R800
created by c.frans w in Photoshop Lightroom - View the full discussion
I would shine some light on your remark:
One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi.
I see a lot of discussion going about print quality with lightroom...
My name is :
Frans
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4116097#4116097
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4116097#4116097. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can I print multiple copies of same photo onto one page on iPhoto 9.5.1?

How can I print multiple copies of same photo onto one page on iPhoto 9.5.1? I was able to do it on the old iPhoto, but can't seem to be able to do it on the new iPhoto. Grrr...

Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy & paste.

How to print date & time stamp on photos?

How to print date & time stamp on photos?

Three methods:
File>process multiple files>labels. Be sure to uncheck "same as source", or the originals will be overwritten. It is best to work on duplicate files, esp. while learning.
Use the horizontal or vertical type tool to add the information manually to each picture file
If the same information is to be applied to several pictures, e.g. a copyright notice, use of a brush made in PSE is very efficient

How can i print from an ipad to my B109n photosmart printer

how can i print from an ipad to my B109n photosmart printer?

Hi,
Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix/setup:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
iPhone: http://www.apple.com/support/iphone/assistant/airprint/
If NO you have to print using other apps (if applicable) such as
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

How can i order prints of more than one photo at a time?

Hi I am trying to order prints of more than one photo at a time but can only select one photo - if I press command it just jumps to the next photo, not allowing me to select multiple photos.
Thanks

Easiest way is to make an album of the photos you want to order, crop them to the print size, select all and order
LN

[HP Photosmart D110a] Printer won't connect to network

Printer: HP Photosmart D110a
Operating system: Mac OSX 10.6.8
I'm living in a dorm room and trying to wirelessly connect my printer to my computer. I can't connect my printer to my university's network because it's protected. Instead I've been connecting to my printer's SSID network. I go into Settings --> Wireless --> Wireless Settings --> Wireless Setup Wizard --> the printer scans for routers, and then the SSID name comes up in a list underneath my university's closed network. It's called HPD110a.7809C6.
I connect to it, it says it's connected, but then the Wireless light keeps flashing blue. I go back to the Wireless tab and it shows that it's connecting, connecting, connecting... and then there's no connection.
My printer was working a little while ago. It's been tempermental and has occasionally worked. But since the last time my roommate used it and turned it off, it's refused to connect to that SSID network and has thus refused to work. I think I solved the connectivity issue I had before by connecting it to the SSID network, but now it won't connect.
Things I've tried to combat this issue:
Restarted the printer, both by turning it off and turning it on manually, as well as pulling the plug out of the back while it was on (I've read in my search for an answer for this problem that doing that can help some issues?) and unplugging it while it was off and then restarting it
Continuously tried to reconnect to the SSID network
Tried to enter the printer's IP in my internet browser's address bar; nothing came up, since it isn't connected
Turned off the wireless in the Wireless Settings menu, then turned it back on a half hour later, then waited to see if it'd reconnect
Reset printer drivers
Updated my ePrint software and installed all availible HP product updates
I've printed out the Network Test multiple times, and each time it's said everything passes, but that I've had numerous disconnects and that the connection is low
I even moved a music player that was near my printer, thinking that maybe the metal was messing up the connection somehow (last resort)
Changed the empty ink cartridge (last resort)
I haven't tried restarting my computer, but I don't think that's what the problem is. My roommate's computer can't connect to the printer either (she's running OSX 10.8).
I have the printer in my Printer list twice in two seperate ways: One version is connected through the IP address, and the other is an option that appeared once while I was connected to the SSID network and just became a new printer. That one includes the scan option, but the first one doesn't. When I try to print something, the first printer says "Network host [IP ADDRESS] is busy.. will retry in 5/10/20/etc seconds..." and the second printer says "Printer offline."
The same thing happens with both whether I've gone into my Airport settings in the upper right and connected to the printer as a Device or not. It still shows my printer as a Device that I connect to, even though the printer itself says it's offline.
Additional informatiom:
I don't have a USB cable for my printer, so I haven't tried that yet.
At one point during all the re-setting and restarting, I saw the printer's IP address appear in the Wireless menu as the connected network, but it still wouldn't print at that time.
That's all the information I can think of in relation to this issue; if anyone needs to know anything else, let me know. Hopefully it's enough, and hopefully someone will have the answer to my problem.
Sorry if anything is confusing or frantic; I've been dealing with this for a few days now, and I've searched all the help forums I could and looked through as many HP documents as possible, but nothing has changed the situation. This is basically my last hope.

After just switching from Cable to FIOS, I had to get my HP C4580 wireless printer back online too.
What was important was that the Printer settings knew about the IP and port changes that are impacted from the new network and router from Verizon. How to do this is in your HP printer network setup manual and handled by their driver when its installed on the PC.
If all fails, try hooking up to your printer via an USB cable and start from there. Make sure everything works wired before trying again from a wireless setup. Youll end up with two printers in your Windows Printer choices, one for USB and one for Wireless, but thats no big deal.
Tmas

Printing 81/2"x 11" photos on Photosmart d110a

Similar Messages

Maybe you are looking for