Printing a bill and a letter in the same report
I wanna print in the same report 2 pages for each row of my table, one for a letter, the other for the bill so I put the letter on the heading page of my report and the bill page on the body.
The problem is , when I run it , all letters are printed first and then bills.and that's not good for me because I wanna have for example: on page 1 :letter for row 1 and on page 2 :bill for row 1,
on page 3 :letter for row 2 and on page 4 :bill for row 2 and so on...unfortunalty I could not do it...
Thank u for helping me
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by al_scott:
I wanna print in the same report 2 pages for each row of my table, one for a letter, the other for the bill so I put the letter on the heading page of my report and the bill page on the body.
The problem is , when I run it , all letters are printed first and then bills.and that's not good for me because I wanna have for example: on page 1 :letter for row 1 and on page 2 :bill for row 1,
on page 3 :letter for row 2 and on page 4 :bill for row 2 and so on...unfortunalty I could not do it...
Thank u for helping me<HR></BLOCKQUOTE>
Hai,
Heade Page will always fire first. Try to put both of them in the Body. Letter in outer repeating frame and Bill in the inner repeating frame and set max records per page to 1. After printing letter insert blank lines so the bill goes to next page.
regards,
Mathan
Similar Messages
-
While generating reports in Oracle BI Publisher in pdf format, the generated pdf reports have hindi इ matra displaced by one character. For example, रिपोर्ट is printed as रपेिोरट. Word file generated of the same report have correct hindi इ matra position and also pdf generated from this word file also contains the same.
-
Cost center and profit center in the same report
I am working on creating a report using report painter/writer. my question is, will it be possible to create a report with cost center group in one column and profit center group in another column and the rows with GL account groups.
I know that GLPCT table dosent have the field KOSTL(cost center) in it. The library I am using is from GLPCT table. But when I checked the characteristics of the library that I am using, it has KOSTL field in it. So I checked that field on and tried to use it in the report. But when I execute the report, an error pops up saying "Characteristic KOSTL cannot be combined with the key figures".
Can someone explain what exactly that error means. and if there is a possible way of using both P.Ctr and C.Ctr in two different colums in the same report.I am asked to create a report which has information of both profit centers and cost centers. some of the fields on columns are cost centers and others are profit centers. This report is basically a P&L summary report for various divisions.
Infact, when I use one basic key figure for cost center and other for profit center and execute the report, it is working!!!!....Is it ok to use two different key figures on two different columns? i dont understand where it is picking the values from..cos cost centers are not present in GLPCT table. -
Printing iCal appointments and To-Dos on the same sheet
Some time ago I pointed out that it was impossible to print what I saw on the iCal day screen with Appointments in the left and To-Dos in the right hand column.
Apple "solved" this by wiping the To-Dos from the right hand column (in the print out) and repeating the appointments in their place. What sense this has I can't understand but I've found a solution: Buy a very inexpensive little program called "TODAY"!
Today prints the day sheet as Events across the page, followed further down by timed Appointments followed again by the list of To-Dos.
GaroolganGo to File>New>Blank file. Enter height & width of your paper stock. Background color to suit. Resolution should be about the same as that of your picture files. This will be your canvas. For printing, it is desirable to have the resolution in the 240-300 px/in range.
Open Picture #1. Go to Select>all, Then Edit>copy to put it on the clipboard
Go back to the blank file from step #1, then Edit>paste.
Do the same for picture #2
Use the move tool to position each picture, and, if necessary, re-size with the corner handles of the bounding box
In the layers palette you should see 3 layers: Background, and layers with each of your 2 pictures. -
Can't print to ethernet and use airport at the same time
I have a Kyocera 6950 printer connected to my Powerbook via ethernet, this works fine (using bonjour). However as soon as I switch airport on and connect to a wireless network, jobs no longer goes to the printer and the Powerbook reports it can't find the printer.
So far I have tried:
1. changing the service order in the network control panel
2. deleting the printer and re-creating it, I can see the printer (via bonjour) and re-create it, but still not print to it.
This has happened at several different locations, anybody else had this or got any ideas. The problem started with Snow Leopard
Many thanks
Regards
Dave HageThanks Greg,
I was wondering if maybe it needed to be on another subnet but there seems little information regarding setting up PostScript printers on ethernet and it was very late so I'd given up messing around with it all last night. I've got most addresses set manually, apart from Airport which is assigned by the router with different addresses permanently allocated to different computers etc. Not to worry! I have a Time Capsule to set up with my new Mac and will try with the printer attached to that. The silly thing is that it works fine with Airport switched on when attached to my older Mac Mini running Leopard, both direct through that computer or accessed from another one.
Can't have printers attached to my router as there's no room for them in the hallway where the router is connected to the internet. Some experimentation is in order now I think! -
Reporting Question - Detail and Summary info in the same report
Hello All,
I have a situation where I have to report the detail and summary information from one cube (or multiple cubes) in a single report. Following is the example cube with smaple data and the required report
Cube - Char - 0CUSTOMER
0MATERIAL
0MATL_GRP
0CURRENCY
Key Fig - 0AMOUNT
Data
0CUSTOMER 0MATERIAL 0MATL_GRP 0AMOUNT 0CURRENCY
CUS1 MAT1 GRP1 1000 USD
CUS1 MAT2 GRP1 2000 USD
CUS1 MAT3 GRP2 3000 USD
CUS1 MAT4 GRP2 4000 USD
CUS2 MAT2 GRP1 2222 USD
If I run a report to See Which Customers have bought Material MAT1, I want to produce a report like
Material Cust Matl_Gr Amt(Matl) Amt(Cust/Mtgr) Amt(Cust)
MAT1 CUS1 GRP1 1000 USD 3000 USD 10000 USD
MAT1 CUS2 GRP1 2222 USD 2222 USD 2222 USD
Any Ideas to create such a report is welcome. I am open to use multiple cubes, Multicubes, summarized data joins etc.
Thanks in advance for the help.
Amit GuptaAmit,
You can acheive this using single cube.
All you need to do is to define 2 restricted keyfigures the following way.
1. Amount (Cust/Material Group)
In the Restricted KF (either global or local), pull in the Material to the right side, right click on it and select "Constant Selection". Save it.
2. Amount (Customer)
Pull in both Material and Material Group and do the same step as above for both. Save it.
Now run the query and tests it. Let us know if i worked.
Gova -
Comparing fields from multiple entities in the same report (report builder 1.0)
Created a model that contains 2 entities. I open that model in report builder 1.0. When I drag a field from one of the entities into the design area, i can no longer see the other entity or use any of the fields from that other entity.
I need to use fields from both entities in the same report (join tables). In management studio i would simply write a query and join tables but i cannot figure out how to do this in report builder. Once i select a field from one entity
how do i select fields from more than one entity and drag them into the same report.Would it be possible for you to send me instructions for this? I am not that familiar with SQL coding but I can definitely figure it out. I have been wanting to get information on reports from multiple entities for a very long time! The only way I can
currently do it is have our document management software people write the report for me for quite a large fee. I would much rather do this myself. Right now I can select a few fields from one entity (the main one), some from a second entity under that one,
but I cannot add any fields from a third entity! Quite annoying and hindering! Thank you :) -
Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?
I would say to start by looking on their web site... unfortunately, that appears to be dead.
Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well. -
I have 2 ipads and my iphone on the same icloud account and it wont let me back it up cause I dont have enough space. So I want to move my iphone over to a new icloud account with my new apple id that i made but i dont want to delete the ipads off the old account just move the iphone to the new one. How do I do that I despreatly need help!!!
To migrate your phone to a new account, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud that you want to keep on the phone, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; your other devices won't be effected by this), provide the password to turn off Find My iPhone (if using iOS 7) and choose Keep on My iPhone when prompted . Then sign back in with your new Apple ID to create your new account and choose Merge to upload your data to the new account.
-
Is there a way to order multiple different prints in any quantity from Iphoto? it appears currently like I would have to ship each separately, even if only one print... is there a way around this so I can can get several DIFFERENT prints of any quantity and ship all at the same time?
Sure - easiest way is to make an album for photos you want to order and drag photos to it - when it is complete open the album, select all and order
LN -
II've had my ipad with retina display for about a 1 now and everything was fine In till I got my iphone 4s and put them on the same account then my ipad stopped letting me log in to my FaceTime and iMessage and it doesn't let me update my apps and dosnt let me log in to iCloud ever since I got my phone and put them on the same account does anyone know how I could fix it and still be able to connected to my iphone??
Did you change your Apple ID?
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Text on the iPad
http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Printing graph and other text in the same page
Hi,
I am aware that for providing graphs in ABAP report we have a FM which is called via a pushbutton in the output screen generally.
Is there any way I can do away with the pushbutton and print the graph and other text in the same page at one go ? I think Smartforms will not allow graph printing.......any other method to achive this ?
The user wants to print the graph and other text in the same page.
Regards,
Sandip.Hi ! no it is not related to smartforms
search for custom container on google you idea about custom container.
following code is for displaying alv on selection screen which is created using custom container
and docking container.
I hope you will get some idea about how to use custom container for your problem
DATA DECLARATIONS
DATA: CONT_DOCKING TYPE REF TO CL_GUI_DOCKING_CONTAINER,
GRID TYPE REF TO CL_GUI_ALV_GRID,
CUST_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
IT_FIELDCAT TYPE LVC_T_FCAT,
GS_LAYOUT TYPE LVC_S_LAYO.
*ITAB TYPE TABLE OF SBOOK.
*& SELECTION SCREEN PARAMETERS
*PARAMETERS:P_TEST TYPE I .
*& AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
IF EBELN[] IS NOT INITIAL.
CREATE OBJECT CONT_DOCKING
EXPORTING
REPID = SY-REPID
DYNNR = SY-DYNNR
SIDE = CONT_DOCKING->DOCK_AT_BOTTOM
EXTENSION = 100.
IF CUST_CONTAINER IS INITIAL.
*----Create the alv with docking container
PERFORM CREATE_AND_INIT_ALV .
ENDIF.
ENDIF.
*& Form BUILD_FIELDCAT
FORM BUILD_FIELDCAT .
DATA WA_FIELDCAT TYPE LVC_S_FCAT.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-REPTEXT = 'Airline Code'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-REPTEXT = 'Flight Connection Number'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
*WA_FIELDCAT-FIELDNAME = 'WUNIT'.
*WA_FIELDCAT-REPTEXT = 'Weight Unit'.
*APPEND WA_FIELDCAT TO IT_FIELDCAT.
*LOOP AT IT_FIELDCAT INTO WA_FIELDCAT.
*IF WA_FIELDCAT-FIELDNAME EQ 'WUNIT'.
*WA_FIELDCAT-EDIT = 'X'.
*WA_FIELDCAT-DRDN_HNDL = '1'.
*WA_FIELDCAT-CHECKTABLE = '!'.
*MODIFY IT_FIELDCAT FROM WA_FIELDCAT.
*ENDIF.
*ENDLOOP.
ENDFORM. "build_fieldcat
*& Form CREATE_AND_INIT_ALV
FORM CREATE_AND_INIT_ALV .
CREATE OBJECT GRID
EXPORTING I_PARENT = CONT_DOCKING.
*--perform build field catalog for alv display
PERFORM BUILD_FIELDCAT .
*--fill the drop down list values
PERFORM fill_dropdown_table .
*----fill final output table
SELECT * FROM EKPO
INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE EBELN IN EBELN.
*UP TO 10 ROWS.
*---display alv
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
CHANGING
IT_FIELDCATALOG = IT_FIELDCAT
IT_OUTTAB = ITAB[].
*---Set editable cells to ready for input initially
CALL METHOD GRID->SET_READY_FOR_INPUT
EXPORTING
I_READY_FOR_INPUT = 1.
ENDFORM. "create_and_init_alv
*& Form set_drdn_table
FORM fill_dropdown_table.
DATA: LT_DROPDOWN TYPE LVC_T_DROP,
LS_DROPDOWN TYPE LVC_S_DROP.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'KG'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'G'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'B'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'T'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
CALL METHOD GRID->SET_DROP_DOWN_TABLE
EXPORTING
IT_DROP_DOWN = LT_DROPDOWN.
ENDFORM. "set_drdn_table -
I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.) now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.
What happens when you try to change them?
Try:
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
I keep getting an error that my billing info for my card doesnt match my bank info, but it does. Nothing has ever been changed. I called my bank, the card company, and all are exactly the same, word for word as my billing info in iTunes.
In fact, every time I get the error code that billing doesnt match, my card gets charged a $1.00 authorization fee. It later falls off, but it shows my card is being billed when they say they cant verify billing info.
I called Apple support and they want to charge me to get their crap together.
I need to do some updates and by a couple apps for work and am about ready to go to ANdroid if I cant get it fixed.
$##@@$%%$##$%%$$%$!!!!!!!!!!!If you're in the US, this is usually caused by the simple fact that what the Postal Service shows as your address does not match what you're entering. Go here & see:
https://tools.usps.com/go/ZipLookupAction!input.action -
I cannot connect my Macbook to Epson printer XP 400. Both are on the same network and Symantic anti virus is disconneted.
Add printer does not find the Epson. All works when I use the USB cable.Further information on my question about the epson wireless printer and macbook.
It seems that the epson xp-400 works wirelessly only with 802.11n wireless network not with 802.11g or earlier.
Does anyone else know about this. I read it on the epson support site for epson xp-400.
Also epson xp-400 will not work wirelessly if it is already connected to a computer with a USB cable.
Maybe you are looking for
-
My finder crashes when I try to open my external hard drive
I have tried to open my external HD and as soon as I double click on the drive icon the finder crashes and goes into a crash loop and won't stop unless Iaunch a program or disc utility. I am running System 10.6.8 and drive checks out in disk utility
-
Apple support .comunicate with me using Netherland language , all comunication , email, and everything connected with support comunicate in Netherland language , but i'm Italian and i cannot understand! How can i change this?
-
Premiere Pro CS6 on Mac crashes when attempting to capture HDV
I've seen this topic previously but without an answer and was hoping for an update. I'm using Premiere Pro CS6.0.5 on a MacPro running 10.9.2 The camera is a Sony HDR-FX7. When in the capture window, the camera is recognized. I can rewind and fast fo
-
Has anyone been able to get https to work with SCEP? Right now I'm just trying to authenticate a trustpoint and it does work if I use http as my enrollment URL but as soon as I change it https I get the following: Unable to locate cert record by issu
-
Hi, I have a PLD of Sales Invoice. In that I want to show the sales order no. and date. But when I call the base ref the no is coming ,but the items r getting repeated. Again if I call Sales Order No. of ORDR it is showing wrong results. How to go f