Printing a booklet, my pdf includes the bleed within the page size

I produce a 24 page document, and have just tried to used the print booklet command to create the printer spreads, rather than imposing manually, printing to a PDF.
However the final pdf pages are set to A3, including the bleed marks, and this means that the final printed product ends up being smaller than A3 after cropping.
When doing this manually, I had a PDF preset I was using. I have found a way to get that preset into the Booklet setup, but the final pdf page size is still too small.

Under page scaling in the print dialog select none and choose a bigger page size. Don't set final pdf pages to A3 as this leaves no room for trims....

Similar Messages

Setting "inside" bleed within the page size

Hello,
I'm using InDesign CS3 for a book layout and I'm trying to set the inside bleed so that it is 0.25" within the page size (trim size) of 8.5". I've tried putting -0.25" but it only accepts positive numbers.
The reason I want the bleed within the trim size is so that the ink doesn't interfere with the adhesive when it's bound.
Thanks for any help.
Mark

Expanding on Bob's suggestion, you could put a white rectangle on a top layer and then turn off its visibility. Then you could work away without having to worry about fitting everything to the guide, and just turn on the layer visibility when you've finished to blot out anything that spills over.
k

When I try to click on print in Mapquest and PDF documents I cannot get the popup to print the page

When I try to click on print in Mapquest and PDF documents I cannot get the popup to print the page when I click on "print."
I have to type the URL in Google Chrome browser and the print button works fine.
How can I get the print popup to work in Firefox 6.0?

My sister's 5s is having the same issue since yesterday.
Neither resetting via holding home+power buttons helped, nor the "reset all settings" in the settings. The only option left is erasing the iPhone and setting it up as a new phone ( or restoring from a backup?)

Print Booklet won't let me because of multiple page sizes, even if I am using A4 for all the pages

Booklet won't let me because of multiple page sizes, even if I am using A4 for all the pages, this is the error message:
"The active document uses multiple page sizes Print Booklet works only with documents that use a consistent page size."
I am using Indesign CS6 (patches are up to date)
thank you
Cecilia

Do you already see this when starting the Print Booklet dialog or later when finally putting out? If you can see the dialog windows, will the preview show all pages in same size?

How do I set the bleed in the gutter for full spread pics?

I am so confused!!
How do I set the bleed in the gutter so that I lose as little as possible in an image that bleeds across the full spread?
I have 75 double page images (full spread) that need to be set so they lose as little as possible when printed into a 350 page book.
The printer has asked for a 3mm bleed. Do I place the photo to the edge of the bleed and just accept that i will lose lots or is there another way?
Thanks.

rob day wrote:
In the case of crossovers there's nothing that a script or the secrets technique will help. If you include inside bleeds in your ID doc and then use the document bleeds during export, crossovers will include an inside bleed like this:
http://www.zenodesign.com/scripts/xoverbleed.png
Which is exactly what I said in my second post. The link to the other technique was for instructional purposes in case there was a situation where there was an element bleeding to the spine that did not cross over.
If you feel compelled to start manually accounting for creep in the document rather than letting it be handled in imposition, you'll run into real problems. The amount of creep needed varies depending on the position of the image on the signature, the weight of the paper and the number of pages in the signature—if the crossover is in the center of the sig there's no creep, while on the outside it's at the max.
Couldn't agree more.

Why is the bleed showing the wrong picture?

Hi!
So, I have a document with 8 A5 pages. I want it exported to pages since I'm sending it to print. The problem is that when I export, the bleed on the left side of my spread facing the right has the picture from the right spread and the other way around. Long story short: My bleeds are changing place. Heres a picture:
Pleae help!

Hi CrazyFred,
Have you tried triple-clicking in the Word document to select text? If that doesn't work, we'll want to take a closer look at how the original PDF was created, as that can have an affect on how well the PDF converts. Please see Will Adobe ExportPDF convert both text and form... | Adobe Community. If the PDF was created by a third-party PDF producer, it may not be well-written, and that can lead to conversion issues.
You can tell how the PDF was created by choosing File > Properties when the PDF is open in Reader. The PDF Producer is listed on the Description tab.
Best,
Sara

I have several times tried to stop following a thread in the PDF's forum about security issues and i still keep getting flooded with emails from this thread. I used the action within the thread that says stop following but appears to have no effect I stil

I have several times tried to stop following a thread in the PDF's forum about security issues and i still keep getting flooded with emails from this thread. I used the action within the thread that says stop following but appears to have no effect I still keep getting from 5 to 20 emails daily. Please help!!!!!!!

This may be helpful: How do I disable email notifications?

ERROR: cannot route the nets within the site IOB_X1Y227

Hi,
I'm trying to generate a bitfile for virtex-7 XCV2000T-FLG1925 using synplify to synthesis and 2014.4 vivado to PR. During the PR process i received the below error.
ERROR: [Constraints 18-608] We cannot route the nets within the site IOB_X1Y227. Reason: Could not route the logical net: u_sys_pub/emwen on site IOB_X1Y227 to the load pin OUTBUF_DCIEN.OUT. Please check your design to see if the pin has a legal route to its driver or loads.
emwen is set output , and
define_attribute {emwen} {xc_loc} {AV28}, at meanwhile, the below constrain is set in .xdc:
create_pblock pblock_u_sys_pub
add_cells_to_pblock [get_pblocks pblock_u_sys_pub] [get_cells -quiet [list u_sys_pub]]
resize_pblock [get_pblocks pblock_u_sys_pub] -add {CLOCKREGION_X0Y3:CLOCKREGION_X1Y5}
please help me to fix this error
thanks.

Hi
The reason for the error message is "IOB blocks should be in static region". See the page no. 54 in the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_4/ug909-vivado-partial-reconfiguration.pdf for more information.
Thanks,
Vinay

Retrieve all the WindowBackingContext within the current page ?

Hello,
How can I retrieve all the WindowBackingContext within the current Page?
For example,
Page1 has a Book1,
Book1 includes Portlet1, Porlet2 and Book1_1
Book1_1 includes Portlet3 and Portlet4.
How can I get all the Portlets(WindowBackingContext) in Page1 ????
Best regards,
Eric

* This method returns a deep List containing all the Window, Page, and Book
* backing contexts of these type of controls that are rendered.
* @return List of BookBackingContext, WindowBackingContext, and PageBackingContext
public List getRenderedChildrenWindowBackingContexts()

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

How to capture the data within the given range of maximum and minimum values ? from csv files

My requirement,
1. Here, the user will provide the range like maximum and minimum values, based on this range, the VI should capture the data within the given range. ( from CSV file as attached )
2. Then VI should calcluate the average value for captured data and export it to excel.
This is my requirement can anyone help me on this.
Many thanks in advance
rc_cks
Attachments:
sample_short.csv ‏2439 KB

Hi,
Thanks for remnding me. I forgt to attach the VI,
Here I am attaching the VI, what I tried.
From attached CSV file, I have to find an average value for columns B,C,D,E,F,G,H,I and AJ, AK. ( data range will be defined by user ), focused only on these columns
Here, the scope is to calculate an average value for given data range by user as MAX and MIN data.
FYI: I tried manually for two instance i.e column H & I. As per H column one steady state values from 7500 to 10500 and similarly in I column 7875 to 10050. So, I gave these as a limit to capture and calculate the average value. But unfortunaltely, requirement has been modified as per below requirements.
More Info on requirement:
--> The user will define the range of data by giving some MAXIMUM and MINIMUM values(for above mentioned columns induvidually), then VI should capture that data range and it has to caculate the average value for that range of data. This is the task I have to complete.
--> I am stuck in creating a logic for data capturing for given range of MAX and MIN value from user,
Can anyone help me on this.
If my explanation is not clear, Please let me know.
Many thanks, help mw
rc
Attachments:
VI_rc.vi ‏25 KB
sample.zip ‏4166 KB

All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct. How do I re-establish the correct dates also in the mailboxes' message list?

All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct. How do I re-establish the correct dates also in the mailboxes' message list?

First thing is to forget all the complex configs and just try to schedule the report to run once now, no alerts, no notifications, no nothing.
Does that work?
Then you can build up the schedule, to see where the problem is coming from.
Sincerely,
Ted Ueda

When I add a watermark and flatten the transparency, it duplicates the file within the file.

When I add a watermark and flatten the transparency, it duplicates the file within the file. (a 105 pg file becomes 210pgs)

After doing so, use the Save As command to save the file under a new name.
This should optimize it and reduce the file's size, sometimes dramatically.

Change the order within the navigation panel

Hi everybody,
within my navigation panel i have two iview, the detail navigation and an own iView (Web Dynpro within the dynamic navigation of a page). Until now the detail navigation appears at the first position in the navigation panel. How can i change the order within the navigation panel so that my own iView will be shown at the first position?
regards,
Sid

Hi Raji,
iviews can be ordered alphabetical. You can set this function in Systemadministration -> Service-Konfiguration -> Applications -> com.sap.portal.ivs.iviewservice -> iViewsSrv. Then you can set this value to ture (sorting true).
You can also change the sort-priority value in the property of each iview to 0..n.
I hope this will help you.
regards,
Sid

I have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i ha

i have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i have on my macbookpro. Can you help me to find out where i am registerd?

If your registrations do not show at https://www.adobe.com/account.html you will not get help in an open forum
You MAY get help at Contact Customer Care
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Printing a booklet, my pdf includes the bleed within the page size

Similar Messages

Maybe you are looking for