Printing a "dynamic static OLE" but can't get it to print on second page.

Hello and thanks in advance for any help on this.
Scenario:   Have Crystall XI and am printing a "dynamic static OLE".
   I opened up the crystal report and dropped a "non-availabe image" on the page. I then right-clicked on the image and
went to 'Format Graphic" .. then to 'Graphic Location" and created the formula with the path to my image. A .xml file was then created with the pathing information in the .xml fields. The image it is supposed to print will be dynamically created thru another process, thus the image size can and will vary. This all works great with two exceptions:
1) If the actual image is smaller than the template or 'non-available' image I placed on the page it will scale it up to
     that size stretching and distorting the image.
      Question:
           Is there any way to tell the crystal report to not scale this smaller image up and to just leave it as it is?
2) If the actual image is larger than one page it will try to push it all on to this one page and will even discard what
     it can't force onto page making the image shrunken and distorted.
       Question:
          Is there a way to have a oversized image actually break to the second or third page?
OR:
       Question:
          Is once you set that 'non-avaliable' image (or template) on page then that is where your dynamic image will have to fit?
Thank you for any input on this subject, your time is very much appreciated.

File > Page Setup = Scale <br />
100% is usually best

Similar Messages

How can i get this variable value into second page IN BSP

Hi friends
I have variable wk_matnr value 'ABC' in first page of BSP.
How can i get this variable value into second page.
Moosa

Hi,
you can define variable (page attribiue) on the second page with the same name. You can realise the Navigation with Button ther started onInputProcesing routine. In onInputProcesing you have to call navigation->set_parameter with attribut name as parameter and then starting the navigation. If you have checked the auto property on the variable on second page and varable have same name, the value of variable should be transported.
[See this tutorial|http://help.sap.com/saphelp_erp2005/helpdata/DE/1a/c5133a62983c0ae10000000a114084/frameset.htm]
Best regards
Bogdan

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

Connected to WiFi but can not get the internet

I'm really hoping that someone can help. I bought my Ipad yesterday but am unable to connect to the internet. I have connected to my WiFi and have full signal strenght but when I go on Safari it tells me that I'm not connected. I have tried changing some of my settings but can only get as far as the message 'Cannot open page - Safari could not open the page because the server stopped responding' I also have the same problem with my Iphone and Ipod touch, I have never tried to sort these as don't need the internet on them. I have tried updating my Itunes and Ipad, both are now fully updated. My internet is working fine on any computer that is not apple... Please help, im pulling my hair out here.
Many thanks

What do you see if you go to Settings > WiFi and touch the ">" next to your network name?
If you touch the ">" you will get the details of your network connection. Things like the type of IP address allocation (DHCP, Static, Bootp), assigned IP Address, Subnet Mask, Router address, DNS addresses, etc.
Please report what you see there.
Also please identify the make, model and type of router you have.
Do you know what kind of security you are using on your router? None, WEP, WPA, WPA2?
When you said, "I have tried changing some of my settings", what did you do?

Has anyone used reMIDI as a plug-in for GarageBand. I downloaded a trial version of reMIDI, which enables MIDI instruments to be strummed or arpegiated, but can't get it to work in Garageband. How do I set it up?

Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
Thanks, Doctor Mark

Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

Got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it

Just upgraded to an iPhone 4s but can't get it to sync with my Outlook Calender I have downloaded iCloud but that does not seem to have helped/

Can anyone help I have just taken an iPhone4s but can't get it to sync with my Outlook calender I have downloaded to my PC the iCloud software but that does not seem to have helped at all?
Thanks Bazzer50

Do you see your Outlook calendar on the iCloud website?
Do you see your iCloud calendar on your iPhone?
This Apple article is a good place to start -> iCloud: Troubleshooting iCloud Calendar

I can listen to audiobook on my mac through itunes but can't get it to download onto my iphone. Any ideas?, I can listen to audiobook on my mac through itunes but can't get it to download onto my iphone. Any ideas?

I can listen to audiobook on my mac through itunes but can't get it to download onto my iphone. Any ideas?, I can listen to audiobook on my mac through itunes but can't get it to download onto my iphone. Any ideas?

I have this question also. They were there and now they are not. Until this is fixed I will not purchase another audiobook.

HT1848 I just downloaded music on my computer but can't get it to synch with my ipad.

I just download music to my computer, but can't get it to synch with my ipad. Does anyone have a suggestion?

iOS: Syncing with iTunes - Support - Apple

Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

Welcome to the Apple Community.
The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay.

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.
I want so set up itunes on my laptop and make sure that I get all of my old music and any music shared from my sons' itunes accounts. Do I have to set up itunes on my new laptop first and then use the same logins? Really concerned about losing any music, etc.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

- Try contacting iTunes for the password problem:
Apple - Support - iTunes - Contact Us
- For the other problem you can try a reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The next standard thing to do is to download/install a new app but you cant 'do that.
- Instead, try restoring from backup.

HT204053 I have 2 itunes accounts that I want to put on one iCloud, but can't get them to sync. What can I do that the instructions aren't telling me?

I have 2 itunes accounts that I want to put on one iCloud, but can't get them to sync. What can I do that the instructions aren't telling me?

You don't mention anything about the music files on your computer that were used to copy into iTunes. If you have moved those files to a different location on you PC you will get that error message from iTunes. This is because iTunes will look for the music files in the original location that they came from on your PC when they were copied. If this is the case you have to tell iTunes to look in the new location for the music files or move the music files back to the original location.

I have a photo album in my apple tv but can't get the apple tv to use it as a screen saver. it is using older photos

I have a photo album in my apple tv but can't get the apple tv to use it as a screen saver. it is using older photos

Is this a software or hardware issue?

Printing a "dynamic static OLE" but can't get it to print on second page.

Similar Messages

Maybe you are looking for