Printing a Line at the end of a Repeating Frame in Reports 6/6i

Hi Folks,
In few of my designed reports I want a horizontal boiler plate line drawn at the end of the repeating frame on each page. The Number of Records property of the repeating frame is set to 0, i.e., depending upon the margin allocated on each page the report should fetch as many records as they can fit in the allocated area of the frame. I have also set the Page Protect property of the repeating frame to Yes, since we want the description of the records to be displayed fully on each page i.e., a record displayed last on a page should have its description on one page and it should not go to the next subsequent page. Now when I draw a horizontal boiler plate line at the end of the repeating frame in the Layout Model and set its property to Print on all Pages, the line in few pages of the report does not print at all and on the rest of the pages it is displayed at its correct position. I have even tried using an Anchor but it still does not work. Do I need to set the property of the anchor or am I missing some basic point here?
TIA
Hassan

Hi there,
I have tried that but when the records are less in number on a page i.e., 1-2 then the line do prints on each page but there is a gap between the line and the last record.I want that the line should print right after the last record. Should I use an anchor here? But we cannot use an anchor between a line and the margin.
Any ideas??

Similar Messages

How to remove the thick line at the end of each page of my report

Please how do I remove the thick line that appears at the end of each page of my report anytime I publish the report unto the Web.

Bring up the property inspector against the report object. In here you will see the settings for HTML output. Remove the entry against the "After Page Value" property.

Need to print horizontal line at the end of main window in each page.

Hi,
I am printing a smartform with main window having 10 lines in footer. The problem I am facing is when the content extends upto two or more pages, I am not getting the horizontal line at the base of main window. For last page it is fine as it contains footer.
Please suggest how to proceed.
Thanks,
RKU

Hi,
If you don't have any frame set on your main window:
Go to output options and mark frames, and then go to details and uncheck checkboxes for above, laft and right, leving only below marked.
This will give you a line in the bottom of you main window.
If you dont' want to do this on the main window, can you create a new window placed at the bottom of the page and use this framing technic on that window. But in that case don't forget to mark the "always draw box and shading" checkbox. as this window contains no values, the will not get printed unless you mark this checkbox.
Regards
Åsa Thenstedt

Horizontal line at the end of page within for each

I try to do the following with PO :
When a PO lines take several page to print I want to draw a line at the end of the page.
<xsl:for-each select=".//LINES_ROW" xdofo:ctx="3" >
<fo:table-row keep-with-next.within-page="always" keep-together = "always" xdofo:repeat="R">
<fo:table-cell keep-together="always" xdofo:use-attribute-sets="lc_4" >
<fo:block xdofo:use-attribute-sets="lb_2 lb_5">
<fo:inline id="Text12{$_XDOFOPOS}"/>
<fo:inline id="Text10{$_XDOFOPOS}"/>
<fo:inline id="Text11{$_XDOFOPOS}"/>
<fo:inline id="Text5{$_XDOFOPOS}"/>
<fo:inline xdofo:use-attribute-sets="li_1">
<xsl:value-of select=".//ITEM_DESCRIPTION" xdofo:field-name="ITEM_DESCRIPTION"/>
</fo:inline>
>
</fo:table-row>
</xsl:for-each>
Now when i reach the end of a page I can't draw a line is there a way to draw an horizontal line ?
Thanks for the quick answer

Did you ever get an answer to this? I have the same question.

How doi print Any variable at the end of page in ALV report?

Hi,
Anyone can tell me that How do i print Any variable at the end of page in ALV report?
Exmale: at the ende of alv report i want to print total no of employee who has taken house loan or education loan.

Hi,
Go through these links
Thread in sdn regarding FOOTER IN ALV
[ALV FOOTER;
Wiki in sdn regarding HEADER AND FOOTER IN ALV
[https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP%20Objects%20-%20ALV%20Model%20-%20Using%20Header%20and%20Footer]
Header and Footer in ALV
[http://www.sap-img.com/abap/test-alv-display-with-header-footer.htm]
Hope this helps.
Thank you,
Pavan.

Print a line on the last or second from last page

I'm using Oracle Report 10.1.2.3.0.
I'd like to print a line on the last page of a report if the report has an odd number of pages or the second from last page of a report if the report has a even number of page. It is the later second from last requirement I'm struggling with. Can anyone help me solve this problem please?
The reason for this is that we are purchasing an envelope inserter that using Optical Mark Recognition (a series of lines on the side of the page). This only reads on the front side of a piece of paper, so when performing a duplex print the marks need to be on the odd page numbers. In this case I need to apply a mark on the front side of the last piece of paper.
Thanks

Hi InoL
Thank you for your response. I have seen similar solutions to this and have investigated them. Although they give you a work around to know the total number of pages in PLSQL, they only give you a way of knowing this once the report has completed formatting the last page. Unfortunately, my requirment is to know when I'm on the second from last page to perform some conditional formatting. I don't think knowing the total number of pages at this stage is going to be possible in reports, therefore I was hoping someone may know a "clever trick" to achieve this.
Thanks
Neil

How to add a new line at the end of eTEXT file

Hi,
I have modified the RTF template for the R12.1.3 Positive Pay File report (IBYPOS_PAY_en.rtf). Everything is good, except that the bank requires a "T" (Capital T) character in a new line at the end of the text file. Has any of you came across this before? How do I modify the template to achieve this?
Thank you,
Sinan Topuz

I believe this is related to BI Publisher. Any comments would be greatly appreciated.
Thanks,
Sinan

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

My new version of Firefox (downloaded automatically) on my Mac displays long paragraphs in emails as a single line, so the end of the paragraph is off the screen. How can I make it automatically wrap to fit the screen?

Long paragraphs in incoming emails display as a single line, with the end of the paragraph running off the screen. I want to make it wrap automatically to fit the screen.

For the browser window, just drag it to the top left of the screen (click and hold on the top bar with the traffic lights to drag), then in the bottom right of the window you'll see a rectangle with diagonal hatching. Click and hold on that and drag the window to the size you want.
Clicking on the green dot at top left will expand the window to fit the screen, clicking it again will shrink it back to where it was (this doesn't work in Finder windows quite the same).
The menu bar size is set in the bowels of the OS, though there may be third-party applications which can alter it.
As it's size is relative to the screen resolution, you could try reducing the resolution in System Preferences > Displays to see if that would suit you better.

File Adapter Write Operation inserts a new line at the end

Hi,
I am using the write operation in the File Adapter from BPEL Process. The data is written successfully to the file and file is also created in the location specified in the adapter wsdl. But in the file created, it creates a new line at the end of the file. This new line has to be avoided when writing data to a file.
Has anyone faced this and solved this ?
I am SOA 10.1.3.4.
Cheers,
- AR

It is a bug in 10g and will be resolved in one of the versions of 11g.
Cheers,
-AR

Empty line at the end of SAP Java instance profile

I saw this today in help.sap.com, which says that an Java instance profile must have an empty line at the end of the file, would anyone know what is it for ?
The instance profile (/usr/sap/<SID>/SYS/profile/<SID>_<instance name>_<hostname>) u2013 this file contains settings that apply to the instance as a whole. For a Java-only installation, the file can be edited with any text editor (beware that the file must have an empty line at the end.);
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/611724f410254ca12a3f396ec5ae85/frameset.htm
thank you
Jonu Joy

I have heard many "explanations" for this, but never really any solid answers.
From experience, however, I can tell you that the SAP profiles (both ABAP and Java) will miss the last parameter if it is located on the bottom line of the file. I have always put in two or three blank spaces at the bottom of the profiles in order to avoid this.

How to show an empty line at the end of a ParagraphView

Hi everybody,
I wonder if anyone knows how to extend ParagraphView to show an empty line at the end of every paragraph?
Thanks in advance,
mrai

I tried to use that class and couldn't get it to work.
JTextField field = new JTextField();
field.setText("blah blah");
CompisiteView view = new ParagraphView(field.getDocument().getRootElement());
int views = view.getViewCount() //always zero...

SAPSCript how to print a comment at the end of main window on first page?

In SAP Scripts, How do I print a comment at the end of the first page (I have several pages of data) in the main window?
- Ven

hi
good
yes we can put condition.....to display the footer window get printed after all data in main window gets over.........................assingn u r footer window to next page [ i.e u r second page] ...and write the condition
In such senario no need to use a window for footer.
In the Script form:
-> In the Main Window itself after all the main data create an Element.
-> Use BOTTOM and END-BOTTOM; write your footer information between them.
In your Driver Program:
-> After printing all the data (means after passing to form and before closing the form) call one WRITE-FORM with the footer element.
I'm sure it will work.
f u r not interested to change the print program. Then simply insert simple code in the footer wondow.
now insert this code in ur footer window
IF &TTXSY-PAGE& = &SAPSCRIPT-FORMPAGES&.
*all code in footer goes here.
ENDIF.
&TTXSY-PAGE& holds the page number of current page.
&SAPSCRIPT-FORMPAGES& holds total form pages.
This will work.
write this code then the footer will be printed in last page itself
/: IF &NEXTPAGE& EQ 0
whatever footer you want.
/: ENDIF
You need to create an element in the MAIN window. You can do it in two ways:
1. In SE71, you can create:
/:E FOOTER
/:BOTTOM
Text
/:ENDBOTTOM
In the print program, just call this element.
2. In you print program, populate parameter type = BOTTOM in FM, WRITE_FORM.
Ex.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'FOOTER'
type = 'MAIN'
window = 'BOTTOM'
EXCEPTIONS....
However, if you issue new page having new header data. Thus, new item data. And if it will exceed more than 1 page, the footer will still appear. To solve this, you need to create a new element in MAIN. Ex. INIT_FOOTER. It just contains the following:
/:E INIT_FOOTER
/:BOTTOM
/:ENDBOTTOM
Call this after passing all item data.
reward point if helpful.
thanks
mrutyun^

Out-file to a line not the end

Hi guys,
I have a script problem I'm trying to resolve. I want it so that a user can edit a single line of a txt tile. Is this possible using the out-file command?
"out-file 'C:\temp.txt' -append -inputobject $user_input"
This will add the line to the end of the file, but that's not what I want it do. Suppose I have a text file that looks like this.
1.Hello
2. Dad
3. Mum
and I want to edit it so hello is now bye. Why can't i just do:
"out-file 'C:\temp.txt'[0] -append -inputobject $user_input"
When I run this nothing happens. Any ideas?

The heading and content description is little confusing
are you looking for code which write on top of the line
Eg:
Line1 - This is user input value
Line2
Line3
$content = Get-Content C:\Temp\See.txt
$userinput = Read-Host 'User Value'
$userinput | Set-Content C:\Temp\See.txt
$content | Add-Content C:\Temp\See.txt
Note: As
Gareth Fletcher<abbr
class="affil"></abbr> suggested it's not possible using Out-File
If you want to replace as you mentioned in description you can use Venu's code
Regards Chen V [MCTS SharePoint 2010]

Line at the end of repeat subform

Hi Adobe experts,
I have got a situation where in the item table is a subform which i have made it with repeat subform
The columns of the item table are drawn by lines.
So for every line item,the horizontal line at the end of the table appears when the subform repeats.
I do not want the line to appear at the end of line item but only at the end of a page..
Is it possible to do so ? or we should change the design by using insert table
Please let me know your suggestions.
Thanks in advance
Regards,
Gowthami SK

Hello Varun,
The line is in the end of the subform ( Placed down ),the subform only is for the item table ,so if the line is in the subform ,as the items repeat,the line also gets repeated
I want the line only at the end of each page when the items get filled
Regards,
Gowthami SK

Printing a Line at the end of a Repeating Frame in Reports 6/6i

Similar Messages

Maybe you are looking for