Printing a selected area in PSE8

I used to print a selected area in an older version (I think it was 4.0)
I do this so that I can create large versions of reference photo's what I can paint watercolors from.
Does anyone know if this is supported?
It may have been the print driver that supported this in the older version.
I know I can crop sections and print that way but print selected was faster.

No, this is gone in PSE 8.

Similar Messages

When I print a selected area of web page, it doesn't fit to the paper. The end of each page are cut off. Is there any solution?

When I print a selected area of web page, it doesn't fit to the paper. The end of each page are cut off.
I'm very sure my printer is set cirrectly.
Can't Firefox shrink to fit when I want to print a selected area of web pages?
This has never occurred in IE.

File >Page Setup -- check your margins, I have set size to 85% which is probably left over from some problem. Also check your printer that it is correctly set to the size of the paper.

Print only selected area

Does a plug in exist for InDesign that would allow me to print only a selected area of the page? I'm looking for the exact same functionality that the Print Selection extension brings to Quark XPress.

This isn't exactly waht you want, but it might be close: http://indesignsecrets.com/free-layout-zones-add-on-is-incredible-productivity-tool.php

Sudden loss of print selected area in Photoshop 10.0.1?

Between printing one image and printing the next I seem to have lost the ability to print a selected area in Photoshop 10.0.1. I am using this old program because the new Photoshop does not have that option. The box is now greyed out. Does any know why I could lose this, and what can I do to get it back? This is extremely important to my work method...
Thank you.
Mary Challinor

Great news! "Print Selected Area" was restored in Photoshop CS6.
Go to File > Print, scroll down in the dialog box that appears, et voila:

Print only cursor-selected area of a PDF in Acrobat Pro, just as it is psbl to do in a browser

Hi
I want to print only cursor-selected area of a PDF in Acrobat Pro. That could be both text and images, which are in my selection. Just as it is psbl to do in a browser. Is it possible in Acrobat PRO?
I am using the latest Acrobat Pro 11.0.9

Thanks for your effort but this again clearly does NOT answer my question. I do see a particular problem and that is that I might want to select text and images over a range of multiple pages. In a doc of 20 pages I might want to make a single selection of the text starting PRECISELY at the MIDDLE of page 2 and then continue dragging my selection all the way to PRECISELY the MIDDLE of page 15, thereby selecting all text and images within the precise range of my selection. That is some 13 pages there and I want to print out ONLY THAT selection of text and images. And in that case I cannot use your suggestion with the marquee zoom. Do you get me?

Elements 7 print selected area only

Have just upgraded from Elements 4 to 7.
Under old version I could easily print a small rectangular selection from a possible A3 print for evaluation before printing the whole thing. There was an option after File>Print to 'Print selected area', after first making a rectangular selection on the image.
Perhaps I am missing something but I cannot find an equivalent command in Elements 7.
Couls someone please enlighten me? - Thanks.

Hello Nicole,
Thanks for that, it seems strange that such a useful feature was discontinued - A3 size paper and ink is too expensive to just run tests. Once or twice, having marked a selection using the Marquee tool, I have found that if I click on 'custom' size the selection only will appear in the print preview. Unfortunately it does not always happen and I have no idea of the criteria required to make it do this on demand.
Cheers.

I want to print. 'selection' and' print frames' are greyed out.

I want to print info on a page. 'selection' & 'print frames' are greyed out.
== This happened ==
Every time Firefox opened
== forever

Hi,
My dad told me he had this 'no selection' problem when he wanted to print out a selection in Hotmail, so I had a hunt around, but didn't find a definitive solution.
So, I have done some playing around, and have come up with this solution which works if you want to print out a selection in Hotmail (using firefox), but it is now greyed out.
It seems to be connected with the way that Hotmail handles frames.
(Thought I would post it as posts like this have helped me a ton in the past :0))
'''To print a selection in hotmail you need to do this.'''
1/ On the email you want to print click the small Printer icon in the hotmail menu.
There is no need to highlight a selection at this stage because the email is in a frame, so it will do no good anyway.
2/ A new page will open up and the printer dialog box will open up.
Close the printer dialog box.
3/ Highlight the text selection that you want to print on that page.
4/ Press Ctrl-P on the keyboard.
5/ The printer dialog box will now pop up again and you will be able to choose 'Selection'
Your selection will now print.

CS6 Photoshop fails to print selected area

PS fails to Print Selected Area, instead it prints an area smaller than the one selected, and it does not center the image on the paper. How can I fix this? The details: image size is 20x24 in. and my selected area is 10x12 in. I am printing to a 13x19 sheet of paper. The image size as printed is 6-5/16 x 9-1/8 in. instead of 10x12, and my selected area is cropped -- unless I check Scale to Fit Print Media but even then the printed image is still the wrong 6-5/16 size. Finally, the visualization is accurate: what is shown in Print dialog is what printed and instead of centering it as requested, the image is printed in the location as displayed. See attached screen shots.

Ask in the PS forum, but as far as I can tell this is a specific Mac-only genuine bug. That being so, duplicate the image and do a "hard" crop for printing.
Mylenium

Select are to be printed in numbers spreadsheet

how do you select an area of spreadsheet to be printed

You cannot. The best way is to print, then select the item "Open In Preview" from the pdf button (bottom-left):
Once the document opens in preview, use the rectangular selection tool to select the are you want, copy, then paste where you want.
Another way is to print using the menu item "File > Print" then look at how the document is paginated then click the "Print..." button and selec the "To" and "From" fields to limit the pages

I installed 4.0 and cannot print anything. I uninstalled and installed 3.6 and cannot print anything. Everything has a .tif extension and wants me to save the file and I just want to print a selection from my email!

I have had nothing but grief since I upgraded to 4. It is hateful. I can't print anything. If I highlight something from a website or my email and tell the printer to just print the selection, it doesn't print. It wants me to save the the file and they all have a .tif extension and nothing will print. I have uninstalled 4 and gone back to 3.6 and the problem is still there. If I highlight the desired selection and copy it to Word 2003, it will print what I want, but I can't print anything from the browser itself. That is the only problem I'm aware of so far. I upgraded about a week ago at most, maybe less than that. I'm so sorry I did. Why can't I print anything? I don't want my selection to be a file, I just want it to print!

Thank you, but it didn't work. My printer stays on away, independently of the PC. I can print from Chrome and IE7 with no problem but not Firefox. The .tif extension refers to a tagged image something. I went looking around in the control panel and I found that Microsoft Office has it's own Access Snapshot Viewer. My company installed Office 2003 on my PC but I only use Word in my work. This snapshot viewer was listed in the control panel under Printers and Faxes. It was not the default anything but for some reason, Firefox 4 installation must have kicked it into gear. I've had the Office software for several months with not one problem. I have Firefox4 for less than a week and everything becomes difficult. I deleted the Office snapshot viewer (hope I don't get fired for it) so my little HP printer is the only one listed and now things seem to be working okay. I have FF 3.6 back up and running. I didn't lose any data and I hope the support and security updates stay available for a long time because it seems like there are plenty of people who aren't in love with FF4. Thank you so much anyway for your help.

Print/Save Selected Text to PDF

I want to use Mozilla Firefox very much for a long time. I like it because the UI is very clean, easy to use, the icon vey pretty. When I use in my Android Mobile, it is very easy and intelligent to select content of page site. Very good!
But I had to install Chrome instead so I've always been using "Print a selected content to PDF" but I couldn't find ways to do that with Firefox. Chrome is doing very good.
I searched all add-ons, pdf printer software but they are only saving or printing all the page (website) to PDF.
Please help me the ways to save a selected content to PDF. Thanks very much.

Hii hanh01001..
I think i know one solution to the problem
https://addons.mozilla.org/en-US/firefox/addon/print-selected-text/?src=api
this is an add on that is used to print the selected text only..
have a nice day :) :)
---Thanks tracy :)

When I try and print a web page in the print screen ALL the Print Frame options are greyed out. It won't let me print a page as I see it. I need to pring a page as is. How do I do it in the new 8.0??

I go to print and try to select the radio button to print all frames, but It's not working

The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page.

How to print a selection in Numbers

Using Numbers in Yosemite, I would like to print only a portion of a larger spreadsheet. This is easily accomplished using Excel by printing the selected cells. How is it achieved in Numbers. Thank you, Scott

Actually, I just found this explanation from Jerry that works; however it is a little circuitous:
" but you can duplicate the Excel process with just a couple of extra keystrokes:
Select the Area to be Printed and Command-C to copy your print area to the Clipboard.
Switch to Preview.app or Acrobat Pro and Command-N to create a PDF document containing your selection.
Command-P to Print.
It takes only a matter of seconds and the result is nearly identical to what you would get with Excel. If Preview is already running, you can Command-Tab to it to make the app switch. If it is not running you can launch it from the Dock, or use my favorite way, Spotlight. To launch an app from Spotlight, without taking your fingers off the keys, type Command-Spacebar, pre, and hit Return.
Give it a try and you may forget about this difference between Excel and Numbers."

How can I print a selection in Apple Mail?

I need help in printing selections in my emails that I recieve in Apple Mail Software. Can you help me on that please? I only want to print a selection of it, not the entire email.

Hi s,
One way would be to copy and paste into a text document. Another would be to do a screen shot (hold command shift and press 4, then drag across the area you want to capture and print it). Another would be to start a reply to the email or forward, then delete what you don't want and print it.

Printing a selection from a document using HP E Print

Hello all,
Is it possible to print a selection from a document using e-Print? I currently can emailt he entire document to my printer however that is it.

Hi dayanks101,
Thank you for being a member of the HP Support Community. I see that you would like to learn how to choose which pages print from a multi-page document.
Since you have the document in an email already it’s fairly easy to choose which pages you would like to print if you are using the HP ePrint app. I’m presuming that you have already download the HP ePrint mobile app to your iPad and added your email account to the app.
Please follow these steps after you have opened the HP ePrint app
Choose the email with the document you need to print.
Please choose the document you want to print (for my screen shot the file is titled “scan 2014_05_29 08-55-01.pdf). This will load the document with the available print options.
Please tap on “Page Range”. It will give you the options of ‘Single’ or ‘Multiple’.
If you are choosing to print just one page please choose ‘Single’ and then choose the page you would like to print.
If you are choosing to print a range of pages please choose ‘Multiple’ and then choose the page range you would like to print.
I hope this helps you print just want you need.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Printing a selected area in PSE8

Similar Messages

Maybe you are looking for