Printing a tranfer posting material document

Dear experts,
Please help me. I have ticked Print via Output Control - Collective Slip of Transfer Stock storage to storage (MIGO , Movement type 311) but system said "The system could not create any output".
I have maintained the condition record in MN21 for the transaction/printed/Print ID.
Please tell me solve the problem ?????
Thanks.

Hi
Please check the following settings in your user profile
Transaction :SU3
Parameters --> Parameter ID = NDR and Parameter values = x
Gobinathan G

Similar Messages

Printing Serial Number in Material document print output

Hi
Is it possible to print serial numbers in Material document print output. Any settings to be done?
Regards

Hi,
Yes you can, you need to get you ABAP Developer to change the smartform (He should know how to do this)
Please award points if helpful
Regards
Adeel

Incorrect SLED when posting Material Document using BAPI_GOODSMVT_CREATE

Hi,
I have an upload program that performs goods movement and creates material document for a given PO using BAPI_GOODSMVT_CREATE.
the program passes the data from input file (through the parameter GOODSMVT_ITEM) including SLED, however, once the material document is posted, the SLED is still derived from batch input master and the BAPI does not use the one passed to it via GOODSMVT_ITEM.
The requirement is that, the SLED provided in the input file should be the SLED of the Matdoc created, and not the SLED maintained in the Batch input master.
Please advise.
thanks,
NC

sorry to say that, but you should learn about the application, you cannot make the field empty, it is SAP design that the valuation type goes to the batch field in case of split valuation active wihtout having batch managment active.
your wish is not possible with enhancements, and if , you would create inconsistencies and bigger problems in subsecuent processes.

Transfer posting material document print

Hi experts
can I achieve this function like below:
I use migo_tr and movement type 311 do transfer posting from one storage location to another storage location, when clicking "post" button, material documnet generated and meanwhile the document be printed immediately.
can anyone guide me to achieve this function? thank you very much!

Dear Mark,
When u get the Print screen & enter LP01 there is a push Button for Properties.
Click on Properties & under General Properties click on Time of printing here set "Print Immediately"
This will ensure that print is fired immediately...
Hope this helps...
Give points if useful...
Thanks,
Jignesh Mehta.

Creation of transfer requirement when posting material document

Hi
I've copied standard movement 311 into 911 but i need another behaviour on this new mov. I use this mov in trx MB21 in order to create a reservation. When I post it in MIGO, I need to create a transfer requirement instead a Posting Change Notice. I think I could modify this on SPRO: Logistics Execution -> Warehouse Management -> Intefaces -> Stocks management -> Movement Classes
but i don't know exactly what to do.
Can anyone help me?
Thanks and regards

Hi,
You can create TR for your mov.type 911 in the below mentioned settings.
SPRO - LE - WM - Interfaces - Inven. Mgmt - Define Mov.types - LE-WM Interface to Inventory Management
Set the indicator as X in the TR column & remove the tick in the posting change option.
Hope its clear,
Regards,

Material document print out

Dear all,
while taking printout of GR/GI or mat doc i am giving the output type and doc no but its not coming. but if i go to mb02 and set output type there then it will come but i want this to be default. so pl guide
Regards,
Dipak

Please check the following steps in config:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
Enter the local printer where you want to print your Goods posting document
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately
regards,
indranil

Why material document not able to print automatically?

Hi,
I think I have posted this question before, however, there is no answer, I will my luck again.
I have setup all the necessary configuration in NACE with my new output type and output condition in MN21, yet the printing still cannot take place immediately.
I check another output type which having printing of materail document able to print out successfully previously (same month), and I tried to post the transaction, and yet the material document is not able to show the output message record on the output message screen. All the previously successfuly posted material document having the output record shown on the output message screen, but mine is unable even though I following the same step of transaction posting.
You guys bump into any of this problem?
please share.
Thanks.

Dear Pankaj,
Your statement below:
And in MIGO, select the appropriate Print Version 1, 2, 3 and also activate "Print via Output Control" check box during posting GR at Header Level under "General" Tab.
I cannot find it in the MIGO, may I know where is it?
Thanks.

Error (Short Dump) while posting any Material document

Hello All Experts,
I am facing an error (short dump) while doing all material document related transactions (for example MIGO,MB1A etc) . I am getting the below message:-
Short text of error message:
Document number 1000 5000000000 2009 was already assigned
Earlier, I had posted some material documents using the same transactions.
Kindly help
Regards,
Atul

Hi Atul,
Please use T-code OMBT to check the number range status of material document. You can click on the 'Intervals' button to check the 'Current number', the last material document number the system was created so far. Try to change the 'Current number' to a number greater than 5000000001, save the change, and post material document again.
Hope it can solve your issue.
Cheers

Material document printing: is program SAPM07DR prepared for smartforms?

Hi everyone.
We need to do a smartform to print material documents through a new output type. Do you know if program SAPM07DR is prepared to work with smartforms? I don't think so, I see that it is prepared for sapscripts and PDF-forms, but it seems not to be prepared for smartforms.
In case that it is not prepared to work with smartforms, do you know any standard program that print smartforms for material documents?
Thanks in advance.
Regards.

These programs doesn't fit with the requirements. I have found program SAPFM07P_SMART, but the problem is that this program is prepared to print an smartform per material document item, and I need to print a smartform for the whole material document information.
So if you don't know any other program, I suppose we will have to addapt a copy of SAPFM07P_SMART to work with the whole material document, and not with every item.
Thanks.

Configuration for WM which will post material doc immediately.

Hi All,
I have configured a WM & now it is creating inbound delivery as soon as material is posted in WM with HU strg location.
But I need to post material document first in the WM & I donnt need Inbound delivery creation. what i need to do so that system posts material document & than the Putaway process will be executed. But the baseline requirement is that the Inbound delivery should not be created.
My second question.. if it is achieved than how it will work for Outbound Delivery? Will it post Goods Issue first or will it create Transferr order first?
Can anyone please help me to knowwhat configuration I need to be do for getting above mentioned requirement.
Many Thanks
Regards
Hiren

I have configured a WM & now it is creating inbound delivery as soon as material is posted in WM with HU strg location.
But I need to post material document first in the WM & I donnt need Inbound delivery creation. what i need to do so that system posts material document & than the Putaway process will be executed. But the baseline requirement is that the Inbound delivery should not be created.
Standard SAP solution is to receive goods in to HU managed storage location via inbound delivery.
If you don't like this, you have to develop your own solution.
My second question.. if it is achieved than how it will work for Outbound Delivery? Will it post Goods Issue first or will it create Transferr order first?
As mentioned, you cannot achive that (GR w/o inbound delivery to HU managed SLoc), so this question is irrelevant.
In standard SAP, in outbound process picking is done first (with reference to outbound delivery), GI comes after picking status of delivery is "C" (fully picked).
Edited by: Csaba Szommer on Nov 25, 2010 8:12 AM

Outbound Delivery with TWO material Documents

Dear all,
Here at my client place, User has created Cash Sales order with Qty-1, and done Post Goods Issue (PGI).
But when go into document flow of sales order it shows two material
documents under one outbound delivery.
But is it possible to have two material documents under same outbound delivery,
if yes, how it is possible and where& what I need to check.
Moreover stock is reduced by qty 2 (with 601 movement).And there is no change log of Quantity in Sales Order and Delivery.
Is there any otherway to post material document with the ref of Delivery(movement type 601).
Please adviceu2026

Hi,
In delvery please check the picked quantity and delviered quantity. If you picked two items and then deliveried two items then it will be creating two material documents. So please check delviered quantity in delivery...
And also have a look at free goods senario if u have implemented
Regards
sankar

Material Document (Post goods receipt) for each Tranfer order in Inbound De

Hello All,
We have following the below process for goods receipt.
1. Create Purchase order.
2. Create Inbound Delivery.
3.Create Transfer order for each line item in Inbound Delivery
4. Confirm tranfers orders.
5. Post goods receipt will automatically takes place after last Transfer order confirmation for that delivery.
So, in the above scenario the Inventory is not available in the IM till last transfer order is confirmed.
So, is it possible to create a Material Document at each transfer order confirmation and post IM inventory , instead of waiting till last transfer order is confirmed.
please advice.
Thank you
T Reddy .

Hello Aktar,
Yes With standard SAP we can post goods receipt either before using MIGO and after using VL32N.
In our scenario we are using Inbound Delivery.
So , with using Inbound delivery we are posting goods receipt after last TO confirmation.
But In our client they may take 2 days to puyawat all the items of an Inbound Delivery.So they do not want to wait till 2 days for the IM posting.
ie in SAP WM as soon as Inbound delivery is created it creates negative stock in 902 and once all the transfer order are confirmed and then post goods receipt takes place and 902 is cleared.
So, we are slitting the TO at delivery line item level and creating separate TO for each line item in a delivery.
So, I am wondering whether is there a way so as soon as first TO is confirmed WM stock updates and IM stock also should also update with same amount with a material docuement.
ie TO by TO IM posting should take place and at Last TO post goods receipt should happen at delivery level.
Please advice.
Thank you
T Reddy.

How to Print a material document .

How to Print a material document . W#hat all configs/settings do i have to make .
I did the following ....
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
Then i went to MB90 and did the following ...
n MB90 output type is maintained as WE01
Transmission medium as 1
sort order as 01
procesing mode as 1
Material document year 2009
Material document 50xxxxxxxx
Excecute
system says
No messages for initial processing exist
Message no. VN108
Then i select the print icon
enter the output device
press enter
System throws a message " Formatting set to 'X_65_80'"
Sysytem comes to Spool request : Information screen
When i display spool request
The system says list contains no data .
What is missing??
Pls let me know ..
Regards
Anis
Regards

Hi Anis,
For step - 4
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain
Print Indicator for GI/Transfer Posting Documents
As your posting a GR, you need to maintain the settings in :
SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt Documents
for 101 movement as 1.
Now post GR & go to MB03, select your document & check in messages tab if the message is generated.
Check & revert.
Regards,
Vivek

PO print OUT And material Document Print Out is coming In English

HI all.
I have Created Vendor In ZH(chinese Language,)and in material master I have maintained description in Chinese language.
I'M taking PO and material Documents print outs in Chinese Server log-in.
even Though Im taking Print outs in Chinese Log-In server, IM getting Print outs in English Language only not In chines language..
At the Time Of PO creation the Communication Language is ZH(Chines)..
I have read some related post even 89899..
But I have not find solution
plz help me.
thanks and regards
ramesh reddy.'

Check SAP Note 894444 - Tool for server-based printing on Windows (SAPSprint) for your requirement,
Installation
Before you install SAPSprint, delete SAPLPD manually. To do this, you normally need to completely delete the installation directory only. If you installed SAPLPD as a service using the srvany tool, you can remove the service by calling 'Instsrv SAPLPD remove'.
You can download SAPSprint as a self-extracting executable file from SAP Service Marketplace:
1. Entry by Application Group (on the left)
2. SAP Frontend Components (on the right)
3. SAPSPRINT (on the right)
4. SAPSPRINT <Release> (on the right)
5. SAPSPRINT <Release> (on the right)
6. Win32 (on the right)
Start the program. After you enter the installation path, the system prompts you to enter the TCP/IP port.
Normally, the default setting of 515 is suitable for the port. You should only change this setting if the Windows TCP/IP print service is also running on the computer. The SAPSprint Windows service starts as soon as the installation is over.
We recommend that you set up the following options for the service in the Windows Service Control Manager:
The service should run under a domain user that has the relevant authorizations for the required printers. After the installation, the service runs under "Local system account". This can access locally-defined printers only. You can set the user in the Windows Service Control Manager, in the options of the SAPSprint service.
If you want to delete SAPSprint, you can do so using the normal Windows uninstall tool.
We recommend that you install the SAPSprint service on a separate computer and not together with a SAP system, especially if you use a large number of printers. All printers that SAPSprint uses must be installed on the SAPSprint computer. This applies particularly to released printers from other computers. These should be installed as a queue on the SAPSprint server.
Also note further settings in accordance with Note 1069483.
Settings
You can display the call parameters available for SAPSprint by calling 'sapsprint -?' on the command line. The most important parameters are those that set options, especially log options for troubleshooting.
You can set the log level to 5 by specifying 'sapsprint -oi LogLevel 5'. Immediately after installation, no log level is set up, which means that no log file is created. By setting the log level to 1, 5, or 9, you can ensure that more information is available in the directory that you specified during the installation. A file called sapsprint.dbg and a print job specific file with a variable name are generated. The second file is deleted after successful printing. It is only retained if the printout is recognized as incorrect. If you set the option 'sapsprint -oi KeepFile 1', then both this file and the print file are retained. This is primarily intended for troubleshooting by SAP Support.
All options are case-sensitive. You can display the most important SAPSprint options by calling 'sapsprint -?'. All possible options are described in Note 85469. Normally, the options described there are not necessary - you should use them only in exceptional circumstances.

MIGO - MB02 - MB90 Print material document forms

Hi,
I want to print out a material document form associated to material transfer within the same plant. Movement 311/411 & 415.
As for today the procedure is to create the material doc (MIGO) -> declare the message associated (MB02) -> print (MB90). Is there a way to suppress the MB02 transaction by adding a button to MIGO? (or any other better way).
Thanks in advance... points awaiting.
Garcia

Hi,
II. Pls check the below settings for GR Print out:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Regards,
Manish

Printing a tranfer posting material document

Similar Messages

Maybe you are looking for