Printing a WA document in Workspace

I have a WA document that consists of a dashboard of 4 objects (spreadsheets and charts) in a 2x2 matrix. All objects are on a single panel, and I have manually aligned them. When I open the document in Workspace, all objects are properly aligned on the screen, but when I do a "print screen via PDF" , the printed output loses much of the alignment (i.e. one chart will overlap another).
Is there a better way to print a WA document in Workspace? How do I retain alignment of objects on the screen when printing?

Hi,
Have you tried using anchors instead of manual alignment? Also try using 1 horizontal split panel and 2 vertical ones for the 2x2 matrix.
Regards,
Gerd

Similar Messages

  • How can I print a document from "workspace?"

    How can I print a document from "workspace?"

    1. Buy a AirPrint enabled printer; see list below
    http://support.apple.com/kb/ht4356
    2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
    http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
    3. Start printing from your iPad without wire
    http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

  • Print a KM document displayed in the portal

    Hi Experts,
    I'm implementing ESS MSS for a client and I was asked to add an iview in the same page as Address to inform employees which other companies/phone provider.. they should inform when they change their address.
    I added a KM document with the different addresses they should contact and displayed on the right on the screen like they asked.
    Now they want to add a print button in order to print this KM document directly from the portal, I suggested the 'by default' browser's print clicking in the right button but they refuse (because the page is printed and not only the KM iview), they want to have a seperate button to print just the KM document.
    Any suggestion guys?
    Thanks you

    In this case nothing to do with the KM Document iview.
    You need to write your custom code in the KM document for getting the print button and print functionality.
    Raghu

  • Issue in printing the batch document with the T-code COPI

    Issue in printing the batch document with the T-code COPI.
    So Batch document is not printing not printing.
    Kindly help.

    I would suggest to read this blog as a starting point: Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers
    then rephrase and enhance your question with some facts because in the moment it is not at all sufficient enough for anybody to help you further on your particular issue.
    I am even in doubt that you posted this issue in the right forum, has this PP transaction really something to do with ABAP Connectivity. Check the space overview page of ABAP Connectivity , under the picture you can read what this space is about.

  • I'm trying to print  an Ancestry document from an iPad 2 using air print onto a Canon 5350 (one of the printers ok'd by Apple) I am unable to change the print orientation from portrait to landscape.  That is I change it in printer settings but no use.

    I'm trying to print an Ancestry document from an iPad 2 using air print.  The printer is a Canon MG5350 (on the Apple approved list) I have no difficulty printing but only in portrait format.  I've tried changing printer preferences from my computer but even though the Canon accepts the changes it will not print landscape - can anyone advise please?

    Hi,
    How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
       http://techtips.salon.com/make-windows-computer-pr​int-server-11914.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • History report page prints before printing each new document?cc=us

    How do i stop my HP Officejet 6700  Premium from printing a history report page before printing each new document, using Windows 7 & Using Microsoft Word? When I open a document and print it, it prints a history including: File Name; Directory; Template; Title; Subject; Keywords; Comments; creation Date; Change Number; Last Saved On; Last Saved By; Total Editing; Last Printed On; As of Last Printing....
    Everything worked perfectly for a year, then I had to reinstall the printer because I deleted it by mistake. I cary it with me when I travel to meetings and didn't have my install disk, so I had to download the install software. I haven't changed any settings in Word, but it appears that the report is generated from Word.
    Help will be appreciated. I can't find any other topic like mine to see an already presented solution.
    This question was solved.
    View Solution.

    Hi,
    The report indeed being generated by Word and not by the pritner driver.
    As you did not clarify your MS Office version I included the steps for Word 2010, I believe the same should also apply for Word 2007:
    From Word click the File menu, then select Options.
    Select Display from the left pane.
    Under the Printing Options sections, uncheck the box next to Print document properties.
    Click OK and try printing again.
    If you cannot find the specific option, please clarify your exact Microsoft Wiord version.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can I print a pages document in book format ..order?

    How can I print a pages document in book format ..order?

    This is usually a function of the driver you're using. Have you looked in the various PDEs for black and white or grayscale? What kind of printer are you using?

  • Export web analysis document from workspace to excel

    Hi all i have the problem regarding exporting the webanalysis document from workspace,i.e when i drilldown the webanalysis document to lowest level and right click on the report and select "export to excel " i am being prompted the webanalysis login and password and unable to view the report in excel . i have the requirement of export to excel directly without the webanalysis login page. pls do provide me the help.

    It's possible to do it but it requires using a script. You can't do it by using the built-in Export Form Data command.

  • How do I lift a picture in a document to print it without printing the entire document, and when I ask it to print at 400%, how do I get it to tell me how many pages there are and what is on them

    I have a pix of a quilt in a document. I would like to print the page of the document at 400% to enable me to see the quilt better. When I go to effects and put in my percent, it prints the entire document and will not allow me to move to other pages. It says its p1 of 1. I am taking a class for making this quilt. I need this pix for the class.

    http://www.kimberlyeinmo.com/classes/
    This the site. The tulip quilt is what I would like to enlarge and print without the whole document.

  • Why can't I print a PDF document?

    when trying to print a PDF document I get the error message " unable to print document".  Sometimes also includes  "No pages  are selected''.
    I'm using an HP laptop and OS Windows 7.
    I have tried selecting all document,and printing it as image,  I have checked that there are no security locks on the document. I have been through the forum several times searching for answers and still I cannot print a PDF.
    Advice please on what other steps I can take.

    Pat Willener,
    Many thanks for the helpful suggestions. . Sean Mitchell's suggestion of
    repairing Adobe reader via the help menu did the trick. I have been able to
    print several PDF documents after following his suggestion.
    Very many thanks for the assistance
    Peter Goldsworthy

  • How to Print a material document .

    How to Print a material document . W#hat all configs/settings do i have to make .
    I did the following ....
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    Then i went to MB90 and did the following ...
    n MB90 output type is maintained as WE01
    Transmission medium as 1
    sort order as 01
    procesing mode as 1
    Material document year 2009
    Material document 50xxxxxxxx
    Excecute
    system says
    No messages for initial processing exist
    Message no. VN108
    Then i select the print icon
    enter the output device
    press enter
    System throws a message " Formatting set to 'X_65_80'"
    Sysytem comes to Spool request : Information screen
    When i display spool request
    The system says list contains no data .
    What is missing??
    Pls let me know ..
    Regards
    Anis
    Regards

    Hi Anis,
    For step - 4
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain
    Print Indicator for GI/Transfer Posting Documents
    As your posting a GR, you need to maintain the settings in :
    SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt Documents
    for 101 movement as 1.
    Now post GR & go to MB03, select your document & check in messages tab if the message is generated.
    Check & revert.
    Regards,
    Vivek

  • How can I print out a document on an '05 version of iLife (iWorkPages)  es)

    How can I print out a document on an '05 version of iLife that includes iWork? I want to make a document in Pages and print it. It tells me that I have to buy Pages, but doesn't tell me where to go to do that.

    Assuminh your profile is correct that you are running OS X 10.5.8, you need the version of Pages from iWork 09.
    Try to find the CD for it on eBay
    Allan

  • HT4356 I don't have wireless printer. How can I print out the document?

    I don't have a wireless printer. How can I print out the document from regular printer?

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • Help! How can i print a color document in black and white?

    I have tried some of the other solutions found on Google but i still can not figure out how to print a color document in black and white on my macbook pro...can someone help me?

    One of the print dialogue options is for a black-and-white draft, for both Safari and Word.

  • Printing a multipage document (7 pg) only prints 1 page windows 7

    Printing a multipage document (7 pg) only prints 1 page windows 7. The original document shows 7 pages but when going to print preview only show pg 1 of 1

    This document may offer some help:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02002372&lc=en&product=1153494&tmp...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

Maybe you are looking for

  • Is there a program that works like the old iPhoto?

    Is there a program that works like the old iPhoto? The old iPhoto is my ideal program. Unfortunately, it does not work on my new operating system. I like having the ability to look over my images with a slide show. However, the new package folder doe

  • Backup cd wont restore or be recognized by itunes

    Old desktop was crashing and i normally used media player to back up all my music but took a chance and used itunes and it worked to the tune of 22cds.. I bought a new laptop and installed itunes and no prompt came up for restoring library or importi

  • 428 mb .pdf crashes computer

    i have a 428MB 32 pg .pdf file that always crashes my computer when i try to print through preview and/or acrobat reader. It varies every time with how far it will get through until the crash. It always sends the job to the printer and starts the pro

  • Can't install software on disk for unkown reason?

    I'm trying to install QuickTime Broadcaster. When the installer gets to the "Select Destination" part, it shows my HD with an exclamation point in a red octagon, and I get the error message: You cannot install QuickTime Broadcaster 1.5.1 on this volu

  • This disk doesn't use the GUID Partition table scheme.

    When I Install the Lion. It is stuck. Lion This disk doesn't use the GUID Partition table scheme.Use disk Utility to change the partition scheme.Select the disk,choose the Partition tab,select the Volume Scheme and then click Options. The last step h