Printing Acrobat 8 PRO PDFs creates colour blocks?

I've been using 8 Pro without any significant printing problems for 2 years.
I often convert a customised size doc in Word to PDF then print it as a reduced size onto A4 paper for review.
Today it went extremely psycho on me. On photo paper the images all come out in deep blues and in ink blocks - images are almost completely filled up, with a bit of white. On normal paper the entire doc is just blacks and greys. It's all black and greys.
When I tried printing from other software (e.g. Word) the colours are all OK. Cartridge cleaning does not indicate colour issues or insufficient ink levels. Must be somethnig to do with the software. Should I reinstal or has someone else seen this problem?
Cheers
Kim

Word is that HP has released a new driver for the 2600 series that addresses this issue. You might check their website for an updated driver.

Similar Messages

Acrobat 9 Pro PDFファイルの画面中にある文字のフォント名などを知る方法

Acrobat 9 Proを使っていますが、PDFファイルを開いてそのプロパティの中のフォントを開くと各フォント別に、(a)種類、(b)エンコーディング、(c)実際のフォント、(d)実際のフォントの種類の４つが表示されます。
PDFファイルを開いた画面中にある特定の文字についてこのような情報を知るにはどうしたらいいでしょうか。4つ全ては無理としても、そのうちのいくつかだけでも知ることはできるでしょうか。

Tocuh UPテキストツールでテキストを選択して、右クリックすると
プロパティからフォント情報が表示されると思います。

Acrobat X ProをアップデートしたらPDFファイルが開かなくなりました.

Adobe Creative Suite 6　を利用しています。
Acrobat X ProをアップデートしたらPDFファイルが開かなくなりました。
どのようにすれば開ける様にできますでしょうか？
Adobe reader　では開くことができます。

fatboy_somiさん
Acrobat本体は起動可能でしょうか。
類似した事象として、もしAcrobat本体も起動せず、ご利用の端末がWindowsの場合、
以下の事象が該当する可能性がございます。
Acrobat X が起動しなくなる（Windows 7）
該当する場合は、URL内の【Creative Suite/Creative Cloud の場合】をお試し下さい。

Acrobat X Pro - pdf printer

hi
I install on my mac (leopard 10.5.8) Adobe Acrobat X Pro.
but i haven't any pdf printer in Preferences->Printer
how I print with acrobat pdf printer as the same on Acrobat 9 Professional?

The proper method to set up is in the original Document.
I've just tested this out. It use to be that you could use page setup with Acrobat.
Since Acrobat 9 the setup menu has been rendered useless, then in Acrobat X it was totally removed.
I created a test Pdf in Word 2011. I setup for a 4by6" Card (like you print Recipes on).
Then I went to Print Menu and choose PDF > Adobe PDF. Then when I chose location and saved file. Acrobat opened up and the PDF was 4by6" Card format.
Whatever WordProcessor you use set page set up there for A4 create your Document choose adobe PDF, under the PDF button in the Print menu. save your PDF document.
When you open your PDF it will be in the proper format.

Acrobat 8 Pro and Create PDF from a Website

Hi,
I'm out of sorts. I can't seem to be able to turn a website thread into PDF file using my Acrobat 8 Pro (Mac user)....
The thread I'm trying to save has multiple pages and all Acrobat 8 does is save only the first page and not any of the subsequent pages.... unless I manually go page by page but then I end up with multiple PDF files that I would have to combine and that is just too time consuming --and would have to learn to do that as well.
Here's the link to the website thread I'm trying to convert into PDF:http://tinyurl.com/6guqpf
Could someone please advice what I may be doing wrong?
Thanks,
R

Thanks Paul, I've tried to Save as PDF in the OSX print dialogue box- but it only saves the first page of the thread I'm trying to save (when most threads have more than 1 page, sometimes up to 30 pages each)
This is what my friend wrote and how she found a way to solve her problem.... however I don't have Adobe 5 as she does and I would like to not have to get Adobe 5 but use only Adobe 8....
<<I start Adobe 8.
Select Create PDF from Web Page and paste in:
http://learningcenter.atkins.com/sessions/discussions/index.jsp?courseSessionId=7233&webPa geId=1000007&courseId=3856
When it's made the first page (see attached) [<<=== can't attach here since you need a password to view it.]
I save it and exit.
Then I open Adobe 5 and then I can click on each topic to start capturing the information (meaning all pages to each thread without a problem).
If I click on a topic in Adobe 8 ... it makes a page in a new browser window ... and I'm lost.>>
Do you or anyone else know why this is so? Why Adobe 8 would open a page in a new browser window and Adobe 5 doesn't?
Thanks again,
R

PDF Printer Acrobat XI Pro

When I choose File->Print->"Adobe PDF Printer" from any application (i.E. "Ai") I get following two windows. The first Window will disappear with 100%, but the second don´t and no file will be created?!!??!??!?
My system: Win7 64 and Adobe CC (Acrobat XI Pro)
Can anyone help me to fix this, please?
Used CS5 a few days before and it will do the job.

No, it don´t work:
I get this window and it don´t go on (stops in this state)
I have to send a large (2 x 3 m, about 7 MB) Ai-illustration to my partner. In the past I´ve printed it via PDF-Printer to DIN A4 format. Is there any solution to do this?

Acrobat X pro pdf printer missing/ puzzle re forum fixes

Licensed Acrobat X pro installed; but no pdf printer.
Attempted workaround
<http://blogs.adobe.com/dmcmahon/2012/06/04/acrobat-pdf-printer-missing-after-installation- on-windows-64-bit/>
Solution 1 repair --did not work
Solution 2 --Uninstall and reinstall: I installed as part of CS5.5...do I have to unistall entire or just Acrobat?
Solution 3: I am copying below with notes as to what didn't show up
Manually install the PDF Printer
Click Start > Control Panel > Devices and Printers
Select Add a printer
Select Add a local printer
Check Use an existing port and select Documents\*.pdf (Adobe PDF) from the drop down. Click Next
[No such file on 'existing port.' attempted using NITRO pdf which came with this new lenovo machine [but never availbale and not installed --jst recommended, although this file exists < NitroPDF Port: (local port) > which I attempt]
Click the Have Disk… button
Click the Browse… button
Navigate to C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF
Select AdobePDF.inf from the list if using Acrobat Pro, or AdobePDFstd.inf if using Acrobat Std, then click the OK button
[this files exists]
You will see many Adobe PDF Converters in the list, however count six down from the top and click Next (you may need to try this numerous times to find the correct Converter from the list that works with your version of Windows)
[Attempted six down--no dice].
Name your printer, e.g. Adobe PDF
Follow the rest of the prompts and your PDF printer should now be installed correctly
If you are later prompted for the ADPDF9.PPD file, it can be found in the C:\Program Files\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\<OS version> folders.
[Once I hit 'test' print it states < Windows cannot find 'C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrotray.exe'.
BUT i'm not using Acrobat 11.0!
Any ideas, o wise ones?
best,
skylar1

Hello All,
I just figured this out--
I installed updates in the Help tab, and the files required, including pdf printer were installed.
Works!
I realize that this is a gen behind in software but I am running legacy large format printers and the newest is not the best in this application.
Hope this helps....
skylar1

Acrobat 9 Pro PDF is not retaining original page settings from Word doc

The document I am trying to put into PDF format (from Word 2000, using Acrobat 9 Pro (trial version)) drops my original Word page settings (5.5" x 8.5") and defaults to 8.5" x 11" in the PDF. Using "Crop Pages" does not remedy the situation - the doc just stays at the larger size in Acrobat/PDF. Can anyone tell me what I might be doing wrong?

Change the paper size in the printer properties before creating the PDF. This is the same as putting the proper paper in a physical printer.

Acrobat X Pro - No create link menu option

Running Acrobat X Pro
Select text, right click, no "Create link" option. I see Add bookmark which works correctly.

I have the same setup with Win 7 and Office 2010 and have created thousands of PDF from Excel sheets, but never noticed this particular issue. Regardless, rather than fight an issue like this where no specific documentation exists, I usually resort to other options in the interest of not getting bogged down in a maddening search for answers.
Go ahead and convert to PDF so that your links are retained, etc. Open the resulting file in Acrobat, and use the crop tool to remove the blank margins that are at issue, either maintaining proportionality or not, depending on your needs, making sure to set the cropping tool to apply the scheme to all pages. I'm assuming that all pages are formatted the same, such that this strategy will work. Then, apply the cropping, and sanitize the file to remove the cropping data. At this point, your blank margins should be completely gone, and the file can be scaled for printing if that is your objective, but that will obviously introduce some white margins again at the printer.
The only other option I'm aware of to address this from the PDF side is via a third-party plug-in from Evermap called AutoPagex. One of its features allows you to scale a document's content to the page margins, either maintaining proportionality or not. Without proportionality, I was able to scale an Excel sheet with black background to all but a tiny sliver of the top and bottom margins in landscape orientation. From here, I scaled the content via an additional feature to 100.5%, and all white margins were gone. That said, it probably just as effective to accomplish this via the crop tool, assuming the page formatting remains consistent.
Disclosure: I have no affiliation of any kind with Evermap, but did address the use of several of their products in my book, "The PDF Litigation Guide."
Hope that helps!
Jason Covey
PDF Litigation Solutions, LLC
www.pdflitigationguide.com

How can I prevent Firefox from opening the file I create when I print a page with PDF Create! 5

After I print a web page using PDF Create! 5, Firefox opens the file so i can view it. Before I print, I select print properties and disable "view resulting pdf". However, the file is always opened in Adobe Acrobat, although I believe I have Adobe Reader set as default. I do not want any file to open. This happens on my non-privileged accounts. On my privileged account, the file is not opened. I have removed Firefox profiles, re-installed Firefox, Reset Firefox in Help-Troubleshooting. PDF Create!5 print screen can only be viewed in a host program such as Firefox, Libre-office Writer, or any other program that prints. They do not open the file either.

Thanks for your help. This is the Scansoft (Nuance) program. What I do not understand is why when I tell the print driver not to open the file with a privileged account, it obeys me. I am not sure where in the registry I would look for the information. I do not want to, but perhaps I should remove the Adobe Acrobat program (temporarily?) - then what would it do? Again, when I print from other programs - browsers, wordprocessors, etc - the file is not opened after printing, just with FireFox. I guess I can live with it, I have spent too much time already.

Adobe 6.0 Pro--PDFs created from multiple PDFs don't have bookmarks from structure?

I'm working with my company's 6.0 Pro (old, I know, but what we've got is what we've got,) on a Windows 7 machine. I've read online that in 6.0, PDFs created from multiple PDFs, by defaut, should have bookmarks from structure that use the original filenames as the bookmark names. I was surprised to read this, because ironically enough this is precisely what I began looking online to see if I could do, and all I could seem to find then were ways to get rid of that function. I don't believe that our installation has been modified in any way, but the binders I'm creating don't automatically have bookmarks from their structure, nor do the bookmarks I'm creating from the structure by menu command have the original file names as their names. Such an automatic bookmark structure w/ that naming scheme would in fact be very helpful in our workflow, as we deal with large volumes of files where outside data paired with file names needs to be one-to-one matched against the actual pdf contents, and opening files individually is time consuming. As of now, when I go to create bookmarks from structure in my document made of multiple pdfs, I have two choices: "Document", which only creates a bookmark to the first page of the whole thing, and "Part," which creates bookmarks to the first pages of all the documents that were combined, with each bookmark named "Part."
We would be satisfied with nameless bookmarks except that the combine feaure is also unreliable. It usually switches the first and last files of the alphabetical order, but not always, meaning that we can't rely on bookmark order to know which file we are looking at once the binder is created.
What I'm hoping to discover is if this behavior for 6.0 Pro is really abnormal and if so, what fixes or workarounds might be available. Thanks.

Just to clarify --
"... should have bookmarks from structure ..."
Not true.
If a PDF is tagged then Acrobat Pro can create new Bookmarks from the PDF's structure (from the Bookmark panel's Options menu).
Currently there is no other mechanism for this.
This may change after PDF-2 (ISO 32000-2) is released but that is still out on the timeline.
Just some things to consider.
When combining multiple PDFs into a new, single PDF click on the Options button and tick "Always add bookmarks..."
This should give you the filename. If a PDF has an entry in its "Title" this will be a bookmark nested under the top (filename) bookmark.
Also, when combining PDFs if there is no entry in "Tiltle" expect to see the filename as a bookmark.
It there is an entry for "Title" expect to see the "Title" entry as the bookmark.
What you describe for the elements/tags "Document" and "Part" are consistent with what they are and how they are permitted to be used in a tagged PDF.
(See ISO 32000-1, Section 14.8)
Be well...

How do we delete an embedded MP3 in an Acrobat X Pro PDF

I created a PDF of a book in Acrobat X Pro and embedded several MP3's - how do I delete the actual MP3 - not just the icon - so the file itself gets smaller in size?

Thank you! That did work. I have another question you might be able to help with.
In our book, disbursed throughout, we have embedded 12 MP3's of songs. At the end of the book, we want to list all the songs and have it point to where they are already embedded, so as not to have to re-embed them again and make the file bigger.
Can this be done?
Thank you.
iva

Can't embed an H.264 compliant video in an Acrobat X Pro pdf

I upgraded my Acrobat 9 Standard to Acrobat X Pro in order to embed a video into a pdf. The movie was .mov which I converted in a .mp4 which was H.264 compliant using a program called WinFF. The video appears in the pdf but won't play. I tried a couple of other compliant format and no luck. Any advice would be greatly appreciated.

Here's the info on the mpg video before conversion:
Here's the info on the video after convertion to mp4:
Thanks for your help.

Acrobat 9 Pro - PDF Optimizer fails when selecting overwrite file during save process

Hello Everyone,
I am wondering if Acrobat 9 Pro has changed in the way it handles PDF Optimizing functioning when trying to overwrite the file you are attempting to optimize. In Acrobat 8 Professional, it overwrites the file just fine when it gets to the save process. It does work when you modify the name during the save process, however, it would be nice to know if this is "the way it works" or the "program has an issue".
Thoughts?
Message received when trying to overwrite the file,
COnversion Warnings> "An error was encountered while saving the document."
Logically, it seems as though the application cannot save over an "opened" file thus dumping that message on me.
Regards. D.

> When using Save As to save a PDF, is it possible to have Commenting and Analysis enabled for that saved PDF by default?
No.

Acrobat X Pro PDF Portfolio does not display video correctly

Windows XP
Acrobat X Pro
SWF file, also SWF file converted to PDF
I am trying to place an SWF file in a portfolio so that the first frame of the video will be visible as the user pages through the portfolio. All I see is a white screen. When I double-click it and then then click "open file" the PDF version at least plays fine. But I can't seem to get the preview to display correctly.
Can anyone provide any help?
Thanks!
Anne Robotti

A thread over in the Acrobat SDK Forum may be of interest to you.
http://forums.adobe.com/message/1868669
You may want to pose follow up questions to that forum.
Be well...

Printing Acrobat 8 PRO PDFs creates colour blocks?

Similar Messages

Maybe you are looking for